2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/drivers/thermal/broadcom/sr-thermal.c
Srinath Mannam fcc6d4cada thermal: broadcom: Remove ACPI support
Unlike DT framework, thermal-zones and its parameters can't be parsed
using ACPI framework. So that ACPI support is removed in this driver.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reported-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14 07:00:37 -07:00

114 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Broadcom
*/
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/thermal.h>
/*
* In stingray thermal IO memory,
* Total Number of available TMONs MASK is at offset 0
* temperature registers BASE is at 4 byte offset.
* Each TMON temperature register size is 4.
*/
#define SR_TMON_TEMP_BASE(id) ((id) * 0x4)
#define SR_TMON_MAX_LIST 6
struct sr_tmon {
struct thermal_zone_device *tz;
unsigned int crit_temp;
unsigned int tmon_id;
struct sr_thermal *priv;
};
struct sr_thermal {
void __iomem *regs;
unsigned int max_crit_temp;
struct sr_tmon tmon[SR_TMON_MAX_LIST];
};
static int sr_get_temp(void *data, int *temp)
{
struct sr_tmon *tmon = data;
struct sr_thermal *sr_thermal = tmon->priv;
*temp = readl(sr_thermal->regs + SR_TMON_TEMP_BASE(tmon->tmon_id));
return 0;
}
static const struct thermal_zone_of_device_ops sr_tz_ops = {
.get_temp = sr_get_temp,
};
static int sr_thermal_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct sr_thermal *sr_thermal;
struct sr_tmon *tmon;
struct resource *res;
u32 sr_tmon_list = 0;
unsigned int i;
int ret;
sr_thermal = devm_kzalloc(dev, sizeof(*sr_thermal), GFP_KERNEL);
if (!sr_thermal)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sr_thermal->regs = (void __iomem *)devm_memremap(&pdev->dev, res->start,
resource_size(res),
MEMREMAP_WB);
if (IS_ERR(sr_thermal->regs)) {
dev_err(dev, "failed to get io address\n");
return PTR_ERR(sr_thermal->regs);
}
ret = device_property_read_u32(dev, "brcm,tmon-mask", &sr_tmon_list);
if (ret)
return ret;
tmon = sr_thermal->tmon;
for (i = 0; i < SR_TMON_MAX_LIST; i++, tmon++) {
if (!(sr_tmon_list & BIT(i)))
continue;
/* Flush temperature registers */
writel(0, sr_thermal->regs + SR_TMON_TEMP_BASE(i));
tmon->tmon_id = i;
tmon->priv = sr_thermal;
tmon->tz = devm_thermal_zone_of_sensor_register(dev, i, tmon,
&sr_tz_ops);
if (IS_ERR(tmon->tz))
return PTR_ERR(tmon->tz);
dev_dbg(dev, "thermal sensor %d registered\n", i);
}
platform_set_drvdata(pdev, sr_thermal);
return 0;
}
static const struct of_device_id sr_thermal_of_match[] = {
{ .compatible = "brcm,sr-thermal", },
{},
};
MODULE_DEVICE_TABLE(of, sr_thermal_of_match);
static struct platform_driver sr_thermal_driver = {
.probe = sr_thermal_probe,
.driver = {
.name = "sr-thermal",
.of_match_table = sr_thermal_of_match,
},
};
module_platform_driver(sr_thermal_driver);
MODULE_AUTHOR("Pramod Kumar <pramod.kumar@broadcom.com>");
MODULE_DESCRIPTION("Stingray thermal driver");
MODULE_LICENSE("GPL v2");