mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 19:53:59 +08:00
ff80f1370f
Revert new 2.6.23 CONFIG_THINKPAD_ACPI_INPUT_ENABLED Kconfig option because it would create a legacy we don't want to support. CONFIG_THINKPAD_ACPI_INPUT_ENABLED was added to try to fix an issue that is now moot with the addition of the netlink ACPI event report interface to the ACPI core. Now that ACPI core can send events over netlink, we can use a different strategy to keep backwards compatibility with older userspace, without the need for the CONFIG_THINKPAD_ACPI_INPUT_ENABLED games. And it arrived before CONFIG_THINKPAD_ACPI_INPUT_ENABLED made it to a stable mainline kernel, even, which is Good. This patch is in sync with some changes to thinkpad-acpi backports, that will keep things sane for userspace across different combinations of kernel versions, thinkpad-acpi backports (or the lack thereof), and userspace capabilities: Unless a module parameter is used, thinkpad-acpi will now behave in such a way that it will work well (by default) with userspace that still uses only the old ACPI procfs event interface and doesn't care for thinkpad-acpi input devices. It will also always work well with userspace that has been updated to use both the thinkpad-acpi input devices, and ACPI core netlink event interface, regardless of any module parameter. The module parameter was added to allow thinkpad-acpi to work with userspace that has been partially updated to use thinkpad-acpi input devices, but not the new ACPI core netlink event interface. To use this mode of hot key reporting, one has to specify the hotkey_report_mode=2 module parameter. The thinkpad-acpi driver exports the value of hotkey_report_mode through sysfs, as well. thinkpad-acpi backports to older kernels, that do not support the new ACPI core netlink interface, have code to allow userspace to switch hotkey_report_mode at runtime through sysfs. This capability will not be provided in mainline thinkpad-acpi as it is not needed there. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il> Cc: Hugh Dickins <hugh@veritas.com> Cc: Richard Hughes <hughsient@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
207 lines
6.8 KiB
Plaintext
207 lines
6.8 KiB
Plaintext
#
|
|
# Misc strange devices
|
|
#
|
|
|
|
menuconfig MISC_DEVICES
|
|
bool "Misc devices"
|
|
default y
|
|
---help---
|
|
Say Y here to get to see options for device drivers from various
|
|
different categories. This option alone does not add any kernel code.
|
|
|
|
If you say N, all options in this submenu will be skipped and disabled.
|
|
|
|
if MISC_DEVICES
|
|
|
|
config IBM_ASM
|
|
tristate "Device driver for IBM RSA service processor"
|
|
depends on X86 && PCI && INPUT && EXPERIMENTAL
|
|
---help---
|
|
This option enables device driver support for in-band access to the
|
|
IBM RSA (Condor) service processor in eServer xSeries systems.
|
|
The ibmasm device driver allows user space application to access
|
|
ASM (Advanced Systems Management) functions on the service
|
|
processor. The driver is meant to be used in conjunction with
|
|
a user space API.
|
|
The ibmasm driver also enables the OS to use the UART on the
|
|
service processor board as a regular serial port. To make use of
|
|
this feature serial driver support (CONFIG_SERIAL_8250) must be
|
|
enabled.
|
|
|
|
WARNING: This software may not be supported or function
|
|
correctly on your IBM server. Please consult the IBM ServerProven
|
|
website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
|
|
information on the specific driver level and support statement
|
|
for your IBM server.
|
|
|
|
config PHANTOM
|
|
tristate "Sensable PHANToM"
|
|
depends on PCI
|
|
help
|
|
Say Y here if you want to build a driver for Sensable PHANToM device.
|
|
|
|
If you choose to build module, its name will be phantom. If unsure,
|
|
say N here.
|
|
|
|
config EEPROM_93CX6
|
|
tristate "EEPROM 93CX6 support"
|
|
---help---
|
|
This is a driver for the EEPROM chipsets 93c46 and 93c66.
|
|
The driver supports both read as well as write commands.
|
|
|
|
If unsure, say N.
|
|
|
|
config SGI_IOC4
|
|
tristate "SGI IOC4 Base IO support"
|
|
depends on PCI
|
|
---help---
|
|
This option enables basic support for the IOC4 chip on certain
|
|
SGI IO controller cards (IO9, IO10, and PCI-RT). This option
|
|
does not enable any specific functions on such a card, but provides
|
|
necessary infrastructure for other drivers to utilize.
|
|
|
|
If you have an SGI Altix with an IOC4-based card say Y.
|
|
Otherwise say N.
|
|
|
|
config TIFM_CORE
|
|
tristate "TI Flash Media interface support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && PCI
|
|
help
|
|
If you want support for Texas Instruments(R) Flash Media adapters
|
|
you should select this option and then also choose an appropriate
|
|
host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
|
|
support', if you have a TI PCI74xx compatible card reader, for
|
|
example.
|
|
You will also have to select some flash card format drivers. MMC/SD
|
|
cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
|
|
Interface support (MMC_TIFM_SD)'.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called tifm_core.
|
|
|
|
config TIFM_7XX1
|
|
tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
|
|
depends on PCI && TIFM_CORE && EXPERIMENTAL
|
|
default TIFM_CORE
|
|
help
|
|
This option enables support for Texas Instruments(R) PCI74xx and
|
|
PCI76xx families of Flash Media adapters, found in many laptops.
|
|
To make actual use of the device, you will have to select some
|
|
flash card format drivers, as outlined in the TIFM_CORE Help.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called tifm_7xx1.
|
|
|
|
config ASUS_LAPTOP
|
|
tristate "Asus Laptop Extras (EXPERIMENTAL)"
|
|
depends on X86
|
|
depends on ACPI
|
|
depends on EXPERIMENTAL && !ACPI_ASUS
|
|
depends on LEDS_CLASS
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This is the new Linux driver for Asus laptops. It may also support some
|
|
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
|
|
standard ACPI events that go through /proc/acpi/events. It also adds
|
|
support for video output switching, LCD backlight control, Bluetooth and
|
|
Wlan control, and most importantly, allows you to blink those fancy LEDs.
|
|
|
|
For more information and a userspace daemon for handling the extra
|
|
buttons see <http://acpi4asus.sf.net/>.
|
|
|
|
If you have an ACPI-compatible ASUS laptop, say Y or M here.
|
|
|
|
config MSI_LAPTOP
|
|
tristate "MSI Laptop Extras"
|
|
depends on X86
|
|
depends on ACPI_EC
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This is a driver for laptops built by MSI (MICRO-STAR
|
|
INTERNATIONAL):
|
|
|
|
MSI MegaBook S270 (MS-1013)
|
|
Cytron/TCM/Medion/Tchibo MD96100/SAM2000
|
|
|
|
It adds support for Bluetooth, WLAN and LCD brightness control.
|
|
|
|
More information about this driver is available at
|
|
<http://0pointer.de/lennart/tchibo.html>.
|
|
|
|
If you have an MSI S270 laptop, say Y or M here.
|
|
|
|
config SONY_LAPTOP
|
|
tristate "Sony Laptop Extras"
|
|
depends on X86 && ACPI
|
|
select BACKLIGHT_CLASS_DEVICE
|
|
---help---
|
|
This mini-driver drives the SNC and SPIC devices present in the ACPI
|
|
BIOS of the Sony Vaio laptops.
|
|
|
|
It gives access to some extra laptop functionalities like Bluetooth,
|
|
screen brightness control, Fn keys and allows powering on/off some
|
|
devices.
|
|
|
|
Read <file:Documentation/sony-laptop.txt> for more information.
|
|
|
|
config SONYPI_COMPAT
|
|
bool "Sonypi compatibility"
|
|
depends on SONY_LAPTOP
|
|
---help---
|
|
Build the sonypi driver compatibility code into the sony-laptop driver.
|
|
|
|
config THINKPAD_ACPI
|
|
tristate "ThinkPad ACPI Laptop Extras"
|
|
depends on X86 && ACPI
|
|
select BACKLIGHT_CLASS_DEVICE
|
|
select HWMON
|
|
select NVRAM
|
|
---help---
|
|
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
|
|
support for Fn-Fx key combinations, Bluetooth control, video
|
|
output switching, ThinkLight control, UltraBay eject and more.
|
|
For more information about this driver see
|
|
<file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
|
|
|
|
This driver was formely known as ibm-acpi.
|
|
|
|
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
|
|
|
|
config THINKPAD_ACPI_DEBUG
|
|
bool "Verbose debug mode"
|
|
depends on THINKPAD_ACPI
|
|
default n
|
|
---help---
|
|
Enables extra debugging information, at the expense of a slightly
|
|
increase in driver size.
|
|
|
|
If you are not sure, say N here.
|
|
|
|
config THINKPAD_ACPI_DOCK
|
|
bool "Legacy Docking Station Support"
|
|
depends on THINKPAD_ACPI
|
|
depends on ACPI_DOCK=n
|
|
default n
|
|
---help---
|
|
Allows the thinkpad_acpi driver to handle docking station events.
|
|
This support was made obsolete by the generic ACPI docking station
|
|
support (CONFIG_ACPI_DOCK). It will allow locking and removing the
|
|
laptop from the docking station, but will not properly connect PCI
|
|
devices.
|
|
|
|
If you are not sure, say N here.
|
|
|
|
config THINKPAD_ACPI_BAY
|
|
bool "Legacy Removable Bay Support"
|
|
depends on THINKPAD_ACPI
|
|
default y
|
|
---help---
|
|
Allows the thinkpad_acpi driver to handle removable bays. It will
|
|
eletrically disable the device in the bay, and also generate
|
|
notifications when the bay lever is ejected or inserted.
|
|
|
|
If you are not sure, say Y here.
|
|
|
|
|
|
endif # MISC_DEVICES
|