2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/drivers/clk/meson/clk-dualdiv.c
Jerome Brunet 889c2b7ec4 clk: meson: rework and clean drivers dependencies
Initially, the meson clock directory only hosted 2 controllers drivers,
for meson8 and gxbb. At the time, both used the same set of clock drivers
so managing the dependencies was not a big concern.

Since this ancient time, entropy did its job, controllers with different
requirement and specific clock drivers have been added. Unfortunately, we
did not do a great job at managing the dependencies between the
controllers and the different clock drivers. Some drivers, such as
clk-phase or vid-pll-div, are compiled even if they are useless on the
target (meson8). As we are adding new controllers, we need to be able to
pick a driver w/o pulling the whole thing.

The patch aims to clean things up by:
* providing a dedicated CONFIG_ for each clock drivers
* allowing clock drivers to be compiled as a modules, if possible
* stating explicitly which drivers are required by each controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-02 17:43:32 +01:00

139 lines
4.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
/*
* The AO Domain embeds a dual/divider to generate a more precise
* 32,768KHz clock for low-power suspend mode and CEC.
* ______ ______
* | | | |
* | Div1 |-| Cnt1 |
* /|______| |______|\
* -| ______ ______ X--> Out
* \| | | |/
* | Div2 |-| Cnt2 |
* |______| |______|
*
* The dividing can be switched to single or dual, with a counter
* for each divider to set when the switching is done.
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
#include "clk-regmap.h"
#include "clk-dualdiv.h"
static inline struct meson_clk_dualdiv_data *
meson_clk_dualdiv_data(struct clk_regmap *clk)
{
return (struct meson_clk_dualdiv_data *)clk->data;
}
static unsigned long
__dualdiv_param_to_rate(unsigned long parent_rate,
const struct meson_clk_dualdiv_param *p)
{
if (!p->dual)
return DIV_ROUND_CLOSEST(parent_rate, p->n1);
return DIV_ROUND_CLOSEST(parent_rate * (p->m1 + p->m2),
p->n1 * p->m1 + p->n2 * p->m2);
}
static unsigned long meson_clk_dualdiv_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_dualdiv_data *dualdiv = meson_clk_dualdiv_data(clk);
struct meson_clk_dualdiv_param setting;
setting.dual = meson_parm_read(clk->map, &dualdiv->dual);
setting.n1 = meson_parm_read(clk->map, &dualdiv->n1) + 1;
setting.m1 = meson_parm_read(clk->map, &dualdiv->m1) + 1;
setting.n2 = meson_parm_read(clk->map, &dualdiv->n2) + 1;
setting.m2 = meson_parm_read(clk->map, &dualdiv->m2) + 1;
return __dualdiv_param_to_rate(parent_rate, &setting);
}
static const struct meson_clk_dualdiv_param *
__dualdiv_get_setting(unsigned long rate, unsigned long parent_rate,
struct meson_clk_dualdiv_data *dualdiv)
{
const struct meson_clk_dualdiv_param *table = dualdiv->table;
unsigned long best = 0, now = 0;
unsigned int i, best_i = 0;
if (!table)
return NULL;
for (i = 0; table[i].n1; i++) {
now = __dualdiv_param_to_rate(parent_rate, &table[i]);
/* If we get an exact match, don't bother any further */
if (now == rate) {
return &table[i];
} else if (abs(now - rate) < abs(best - rate)) {
best = now;
best_i = i;
}
}
return (struct meson_clk_dualdiv_param *)&table[best_i];
}
static long meson_clk_dualdiv_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_dualdiv_data *dualdiv = meson_clk_dualdiv_data(clk);
const struct meson_clk_dualdiv_param *setting =
__dualdiv_get_setting(rate, *parent_rate, dualdiv);
if (!setting)
return meson_clk_dualdiv_recalc_rate(hw, *parent_rate);
return __dualdiv_param_to_rate(*parent_rate, setting);
}
static int meson_clk_dualdiv_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_dualdiv_data *dualdiv = meson_clk_dualdiv_data(clk);
const struct meson_clk_dualdiv_param *setting =
__dualdiv_get_setting(rate, parent_rate, dualdiv);
if (!setting)
return -EINVAL;
meson_parm_write(clk->map, &dualdiv->dual, setting->dual);
meson_parm_write(clk->map, &dualdiv->n1, setting->n1 - 1);
meson_parm_write(clk->map, &dualdiv->m1, setting->m1 - 1);
meson_parm_write(clk->map, &dualdiv->n2, setting->n2 - 1);
meson_parm_write(clk->map, &dualdiv->m2, setting->m2 - 1);
return 0;
}
const struct clk_ops meson_clk_dualdiv_ops = {
.recalc_rate = meson_clk_dualdiv_recalc_rate,
.round_rate = meson_clk_dualdiv_round_rate,
.set_rate = meson_clk_dualdiv_set_rate,
};
EXPORT_SYMBOL_GPL(meson_clk_dualdiv_ops);
const struct clk_ops meson_clk_dualdiv_ro_ops = {
.recalc_rate = meson_clk_dualdiv_recalc_rate,
};
EXPORT_SYMBOL_GPL(meson_clk_dualdiv_ro_ops);
MODULE_DESCRIPTION("Amlogic dual divider driver");
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_LICENSE("GPL v2");