2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
linux-next/arch/arm/boot/dts/omap2430.dtsi
Linus Torvalds 97e18dc007 MMC highlights for 3.15:
Core:
  - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior.
  - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V.
  - Add GPIO descriptor based slot-gpio card detect API.
 
 Drivers:
  - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c.
  - mmci: Support HW busy detection on ux500.
  - omap: Support MMC_ERASE.
  - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23.
  - rtsx: Support pre-req/post-req async.
  - sdhci: Add support for Realtek RTS5250 controllers.
  - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect.
  - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support.
  - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTRLHLAAoJEHNBYZ7TNxYMoqEQAOULXl1SHt0aHn5I0cfdVnRm
 J3i56MqarwXQOse/qJrg8/uKsggAu0ivTlQ7x1h6bpXmzHqvOtZhSoO9BqGEvxOU
 WNeA9ouaKMx3gCpIAwl9Odox+d2E+91nRfxU3fZTDITy554fREXmIpWiidjFPR7n
 2oHT0yvGuLjunTC8MhxSB0OsggoIDXDTVPxrcf2k+AcAZAMlCMDNirN9+JbhiVM9
 PNESapMyQAbFy18BGzCt5lO2o6aRileaSdX4BFTW4lx2LSPryUVV3cnfIH4zlytW
 joVDWyU5kAtQgfhoEhTsWJld+cwHsMUrl/FOfhMvBWbPMxLJnbFx8b459nKJDM5j
 NUo29KQxxHgWblGYx+F5SYuTloqWtX5iQWsez9g38Z/3UtjHR++o3+auwTFsZFRe
 7EusZqsXdKggx1iiW/5afgb+tFOiCe5WOOQv29YdqWurPhaSK2Nr1aprD4RRiMeT
 IG9qBLhHFLl8Pv0nTdEGbJHhAhihja6w2ul+i/8JSaDOYAGFbEn47MC8JfrKAnpw
 WovxkSqMroMhjI+51cwJnVtdczQWx5kpjqDY0VaJlKvOfcwyOuyTU+s2vrHVDMZS
 a0HgaXeVxr5IcDTz2zo1f6UbM4k2z/Ka0LOOSPqyOYOpFuT6VkXhgOVq6fsRpnaN
 /9CUirULwF5ej0oz38hk
 =6S8w
 -----END PGP SIGNATURE-----

Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.15:

  Core:
   - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior
   - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V
   - Add GPIO descriptor based slot-gpio card detect API

  Drivers:
   - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c
   - mmci: Support HW busy detection on ux500
   - omap: Support MMC_ERASE
   - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23
   - rtsx: Support pre-req/post-req async
   - sdhci: Add support for Realtek RTS5250 controllers
   - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect
   - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support
   - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs"

* tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits)
  mmc: sdhci-acpi: Intel SDIO has broken card detect
  mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller
  mmc: sdhci-msm: Add platform_execute_tuning implementation
  mmc: sdhci-msm: Initial support for Qualcomm chipsets
  mmc: sdhci-msm: Qualcomm SDHCI binding documentation
  sdhci: only reprogram retuning timer when flag is set
  mmc: rename ARCH_BCM to ARCH_BCM_MOBILE
  mmc: sdhci: Allow for irq being shared
  mmc: sdhci-acpi: Add device id 80860F16
  mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14
  mmc: slot-gpio: Add GPIO descriptor based CD GPIO API
  mmc: slot-gpio: Split out CD IRQ request into a separate function
  mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
  Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
  mmc: sdhci-spear: use generic card detection gpio support
  mmc: sdhci-spear: remove support for power gpio
  mmc: sdhci-spear: simplify resource handling
  mmc: sdhci-spear: fix platform_data usage
  mmc: sdhci-spear: fix error handling paths for DT
  mmc: sdhci-bcm-kona: fix build errors when built-in
  ...
2014-04-09 08:39:39 -07:00

258 lines
6.0 KiB
Plaintext

/*
* Device Tree Source for OMAP243x SoC
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include "omap2.dtsi"
/ {
compatible = "ti,omap2430", "ti,omap2";
ocp {
counter32k: counter@49020000 {
compatible = "ti,omap-counter32k";
reg = <0x49020000 0x20>;
ti,hwmods = "counter_32k";
};
omap2430_pmx: pinmux@49002030 {
compatible = "ti,omap2430-padconf", "pinctrl-single";
reg = <0x49002030 0x0154>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <8>;
pinctrl-single,function-mask = <0x3f>;
};
omap2_scm_general: tisyscon@49002270 {
compatible = "syscon";
reg = <0x49002270 0x240>;
};
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
reg = <0x230 0x4>;
syscon = <&omap2_scm_general>;
pbias_mmc_reg: pbias_mmc_omap2430 {
regulator-name = "pbias_mmc_omap2430";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
};
gpio1: gpio@4900c000 {
compatible = "ti,omap2-gpio";
reg = <0x4900c000 0x200>;
interrupts = <29>;
ti,hwmods = "gpio1";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio2: gpio@4900e000 {
compatible = "ti,omap2-gpio";
reg = <0x4900e000 0x200>;
interrupts = <30>;
ti,hwmods = "gpio2";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio3: gpio@49010000 {
compatible = "ti,omap2-gpio";
reg = <0x49010000 0x200>;
interrupts = <31>;
ti,hwmods = "gpio3";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio4: gpio@49012000 {
compatible = "ti,omap2-gpio";
reg = <0x49012000 0x200>;
interrupts = <32>;
ti,hwmods = "gpio4";
ti,gpio-always-on;
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpio5: gpio@480b6000 {
compatible = "ti,omap2-gpio";
reg = <0x480b6000 0x200>;
interrupts = <33>;
ti,hwmods = "gpio5";
#gpio-cells = <2>;
gpio-controller;
#interrupt-cells = <2>;
interrupt-controller;
};
gpmc: gpmc@6e000000 {
compatible = "ti,omap2430-gpmc";
reg = <0x6e000000 0x1000>;
#address-cells = <2>;
#size-cells = <1>;
interrupts = <20>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
};
mcbsp1: mcbsp@48074000 {
compatible = "ti,omap2430-mcbsp";
reg = <0x48074000 0xff>;
reg-names = "mpu";
interrupts = <64>, /* OCP compliant interrupt */
<59>, /* TX interrupt */
<60>, /* RX interrupt */
<61>; /* RX overflow interrupt */
interrupt-names = "common", "tx", "rx", "rx_overflow";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
dmas = <&sdma 31>,
<&sdma 32>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp2: mcbsp@48076000 {
compatible = "ti,omap2430-mcbsp";
reg = <0x48076000 0xff>;
reg-names = "mpu";
interrupts = <16>, /* OCP compliant interrupt */
<62>, /* TX interrupt */
<63>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
dmas = <&sdma 33>,
<&sdma 34>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp3: mcbsp@4808c000 {
compatible = "ti,omap2430-mcbsp";
reg = <0x4808c000 0xff>;
reg-names = "mpu";
interrupts = <17>, /* OCP compliant interrupt */
<89>, /* TX interrupt */
<90>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
dmas = <&sdma 17>,
<&sdma 18>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp4: mcbsp@4808e000 {
compatible = "ti,omap2430-mcbsp";
reg = <0x4808e000 0xff>;
reg-names = "mpu";
interrupts = <18>, /* OCP compliant interrupt */
<54>, /* TX interrupt */
<55>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
dmas = <&sdma 19>,
<&sdma 20>;
dma-names = "tx", "rx";
status = "disabled";
};
mcbsp5: mcbsp@48096000 {
compatible = "ti,omap2430-mcbsp";
reg = <0x48096000 0xff>;
reg-names = "mpu";
interrupts = <19>, /* OCP compliant interrupt */
<81>, /* TX interrupt */
<82>; /* RX interrupt */
interrupt-names = "common", "tx", "rx";
ti,buffer-size = <128>;
ti,hwmods = "mcbsp5";
dmas = <&sdma 21>,
<&sdma 22>;
dma-names = "tx", "rx";
status = "disabled";
};
mmc1: mmc@4809c000 {
compatible = "ti,omap2-hsmmc";
reg = <0x4809c000 0x200>;
interrupts = <83>;
ti,hwmods = "mmc1";
ti,dual-volt;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
compatible = "ti,omap2-hsmmc";
reg = <0x480b4000 0x200>;
interrupts = <86>;
ti,hwmods = "mmc2";
dmas = <&sdma 47>, <&sdma 48>;
dma-names = "tx", "rx";
};
timer1: timer@49018000 {
compatible = "ti,omap2420-timer";
reg = <0x49018000 0x400>;
interrupts = <37>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
mcspi3: mcspi@480b8000 {
compatible = "ti,omap2-mcspi";
ti,hwmods = "mcspi3";
reg = <0x480b8000 0x100>;
interrupts = <91>;
dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
dma-names = "tx0", "rx0", "tx1", "rx1";
};
usb_otg_hs: usb_otg_hs@480ac000 {
compatible = "ti,omap2-musb";
ti,hwmods = "usb_otg_hs";
reg = <0x480ac000 0x1000>;
interrupts = <93>;
};
wd_timer2: wdt@49016000 {
compatible = "ti,omap2-wdt";
ti,hwmods = "wd_timer2";
reg = <0x49016000 0x80>;
};
};
};
&i2c1 {
compatible = "ti,omap2430-i2c";
};
&i2c2 {
compatible = "ti,omap2430-i2c";
};