Pawel Moll baaece2245 ARM: 6635/2: Configure reference clock for Versatile Express timers ... Timers on Versatile Express mainboard are used as system clock/event sources. Driver assumes that they are clocked with 1MHz signal. Old V2M firmware apparently configured it by default, but on newer boards one can observe that "sleep 1" command takes over 30 seconds to finish, as the timers are fed with 32kHz instead... This patch performs required magic and also removes code clearing timer's control registers, as exactly the same operations are performed by the timer driver few jiffies later. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>		2011-01-25 16:18:33 +00:00
..
arm_timer.h	ARM: Improve documentation in arm_timer.h	2010-04-29 18:04:15 +01:00
cache-l2x0.h	ARM: l2x0: Add aux control register bitfields	2010-12-18 09:30:15 -08:00
cache-tauros2.h	ARM: Add Tauros2 L2 cache controller support	2009-11-27 15:43:21 -05:00
clps7111.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
coresight.h	ARM: 6293/1: coresight: cosmetic fixes	2010-10-04 20:20:44 +01:00
cs89712.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
debug-8250.S	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
debug-pl01x.S	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
dec21285.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
entry-macro-gic.S	ARM: GIC: private a standard get_irqnr_preamble assembler macro	2010-12-14 19:21:47 +00:00
entry-macro-iomd.S	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
ep7211.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
ep7212.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
gic.h	ARM: GIC: move enablement of PPI interrupts to gic.c	2010-12-14 19:21:52 +00:00
icst.h	Update broken web addresses in arch directory.	2010-10-18 11:03:21 +02:00
ioc.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
iomd.h	[ARM] clps7500: remove support	2008-11-27 12:38:11 +00:00
iop3xx-adma.h	iop-adma: redundant/wrong tests in iop_*_count()?	2010-02-28 22:22:12 -07:00
iop3xx-gpio.h	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
iop3xx.h	iop: enable generic time	2009-10-29 11:46:55 -07:00
iop_adma.h	Merge branch 'dmaengine' into async-tx-next	2009-09-08 17:55:21 -07:00
it8152.h	ARM: it8152: add IT8152_LAST_IRQ definition to fix build error	2011-01-03 23:18:32 +08:00
linkup-l1110.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
locomo.h	[ARM] locomo: allow cascaded IRQ base to be specified by platforms	2010-03-02 07:40:50 +08:00
memc.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
pci_v3.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
pl080.h	DMAENGINE: correct PL080 register header file	2010-08-14 16:29:55 +01:00
pl330.h	ARM: 6132/1: PL330: Add common core driver	2010-05-15 15:03:50 +01:00
sa1111.h	[ARM] sa1111: allow cascaded IRQs to be used by platforms	2010-03-02 07:40:51 +08:00
scoop.h	[ARM] scoop: Add CPR register bit definitions	2010-08-05 14:32:26 +08:00
sp810.h	ARM: 6635/2: Configure reference clock for Versatile Express timers	2011-01-25 16:18:33 +00:00
ssp.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
timer-sp.h	ARM: 6432/1: move timer-sp.c from versatile to common	2010-11-04 15:49:32 +00:00
uengine.h	[ARM] move include/asm-arm to arch/arm/include/asm	2008-08-02 21:32:35 +01:00
vic.h	[ARM] VIC: Add power management device	2009-05-07 11:04:57 +01:00