mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
565 lines
14 KiB
C
565 lines
14 KiB
C
/*
|
|
* MPC8xx Internal Memory Map
|
|
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
|
|
*
|
|
* The I/O on the MPC860 is comprised of blocks of special registers
|
|
* and the dual port ram for the Communication Processor Module.
|
|
* Within this space are functional units such as the SIU, memory
|
|
* controller, system timers, and other control functions. It is
|
|
* a combination that I found difficult to separate into logical
|
|
* functional files.....but anyone else is welcome to try. -- Dan
|
|
*/
|
|
#ifdef __KERNEL__
|
|
#ifndef __IMMAP_8XX__
|
|
#define __IMMAP_8XX__
|
|
|
|
/* System configuration registers.
|
|
*/
|
|
typedef struct sys_conf {
|
|
uint sc_siumcr;
|
|
uint sc_sypcr;
|
|
uint sc_swt;
|
|
char res1[2];
|
|
ushort sc_swsr;
|
|
uint sc_sipend;
|
|
uint sc_simask;
|
|
uint sc_siel;
|
|
uint sc_sivec;
|
|
uint sc_tesr;
|
|
char res2[0xc];
|
|
uint sc_sdcr;
|
|
char res3[0x4c];
|
|
} sysconf8xx_t;
|
|
|
|
/* PCMCIA configuration registers.
|
|
*/
|
|
typedef struct pcmcia_conf {
|
|
uint pcmc_pbr0;
|
|
uint pcmc_por0;
|
|
uint pcmc_pbr1;
|
|
uint pcmc_por1;
|
|
uint pcmc_pbr2;
|
|
uint pcmc_por2;
|
|
uint pcmc_pbr3;
|
|
uint pcmc_por3;
|
|
uint pcmc_pbr4;
|
|
uint pcmc_por4;
|
|
uint pcmc_pbr5;
|
|
uint pcmc_por5;
|
|
uint pcmc_pbr6;
|
|
uint pcmc_por6;
|
|
uint pcmc_pbr7;
|
|
uint pcmc_por7;
|
|
char res1[0x20];
|
|
uint pcmc_pgcra;
|
|
uint pcmc_pgcrb;
|
|
uint pcmc_pscr;
|
|
char res2[4];
|
|
uint pcmc_pipr;
|
|
char res3[4];
|
|
uint pcmc_per;
|
|
char res4[4];
|
|
} pcmconf8xx_t;
|
|
|
|
/* Memory controller registers.
|
|
*/
|
|
typedef struct mem_ctlr {
|
|
uint memc_br0;
|
|
uint memc_or0;
|
|
uint memc_br1;
|
|
uint memc_or1;
|
|
uint memc_br2;
|
|
uint memc_or2;
|
|
uint memc_br3;
|
|
uint memc_or3;
|
|
uint memc_br4;
|
|
uint memc_or4;
|
|
uint memc_br5;
|
|
uint memc_or5;
|
|
uint memc_br6;
|
|
uint memc_or6;
|
|
uint memc_br7;
|
|
uint memc_or7;
|
|
char res1[0x24];
|
|
uint memc_mar;
|
|
uint memc_mcr;
|
|
char res2[4];
|
|
uint memc_mamr;
|
|
uint memc_mbmr;
|
|
ushort memc_mstat;
|
|
ushort memc_mptpr;
|
|
uint memc_mdr;
|
|
char res3[0x80];
|
|
} memctl8xx_t;
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* BR - Memory Controler: Base Register 16-9
|
|
*/
|
|
#define BR_BA_MSK 0xffff8000 /* Base Address Mask */
|
|
#define BR_AT_MSK 0x00007000 /* Address Type Mask */
|
|
#define BR_PS_MSK 0x00000c00 /* Port Size Mask */
|
|
#define BR_PS_32 0x00000000 /* 32 bit port size */
|
|
#define BR_PS_16 0x00000800 /* 16 bit port size */
|
|
#define BR_PS_8 0x00000400 /* 8 bit port size */
|
|
#define BR_PARE 0x00000200 /* Parity Enable */
|
|
#define BR_WP 0x00000100 /* Write Protect */
|
|
#define BR_MS_MSK 0x000000c0 /* Machine Select Mask */
|
|
#define BR_MS_GPCM 0x00000000 /* G.P.C.M. Machine Select */
|
|
#define BR_MS_UPMA 0x00000080 /* U.P.M.A Machine Select */
|
|
#define BR_MS_UPMB 0x000000c0 /* U.P.M.B Machine Select */
|
|
#define BR_V 0x00000001 /* Bank Valid */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* OR - Memory Controler: Option Register 16-11
|
|
*/
|
|
#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */
|
|
#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */
|
|
#define OR_CSNT_SAM 0x00000800 /* Chip Select Negation Time/ Start */
|
|
/* Address Multiplex */
|
|
#define OR_ACS_MSK 0x00000600 /* Address to Chip Select Setup mask */
|
|
#define OR_ACS_DIV1 0x00000000 /* CS is output at the same time */
|
|
#define OR_ACS_DIV4 0x00000400 /* CS is output 1/4 a clock later */
|
|
#define OR_ACS_DIV2 0x00000600 /* CS is output 1/2 a clock later */
|
|
#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
|
|
#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
|
|
#define OR_BI 0x00000100 /* Burst inhibit */
|
|
#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */
|
|
#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
|
|
#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
|
|
#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
|
|
#define OR_SCY_3_CLK 0x00000030 /* 3 clock cycles wait states */
|
|
#define OR_SCY_4_CLK 0x00000040 /* 4 clock cycles wait states */
|
|
#define OR_SCY_5_CLK 0x00000050 /* 5 clock cycles wait states */
|
|
#define OR_SCY_6_CLK 0x00000060 /* 6 clock cycles wait states */
|
|
#define OR_SCY_7_CLK 0x00000070 /* 7 clock cycles wait states */
|
|
#define OR_SCY_8_CLK 0x00000080 /* 8 clock cycles wait states */
|
|
#define OR_SCY_9_CLK 0x00000090 /* 9 clock cycles wait states */
|
|
#define OR_SCY_10_CLK 0x000000a0 /* 10 clock cycles wait states */
|
|
#define OR_SCY_11_CLK 0x000000b0 /* 11 clock cycles wait states */
|
|
#define OR_SCY_12_CLK 0x000000c0 /* 12 clock cycles wait states */
|
|
#define OR_SCY_13_CLK 0x000000d0 /* 13 clock cycles wait states */
|
|
#define OR_SCY_14_CLK 0x000000e0 /* 14 clock cycles wait states */
|
|
#define OR_SCY_15_CLK 0x000000f0 /* 15 clock cycles wait states */
|
|
#define OR_SETA 0x00000008 /* External Transfer Acknowledge */
|
|
#define OR_TRLX 0x00000004 /* Timing Relaxed */
|
|
#define OR_EHTR 0x00000002 /* Extended Hold Time on Read */
|
|
|
|
/* System Integration Timers.
|
|
*/
|
|
typedef struct sys_int_timers {
|
|
ushort sit_tbscr;
|
|
char res0[0x02];
|
|
uint sit_tbreff0;
|
|
uint sit_tbreff1;
|
|
char res1[0x14];
|
|
ushort sit_rtcsc;
|
|
char res2[0x02];
|
|
uint sit_rtc;
|
|
uint sit_rtsec;
|
|
uint sit_rtcal;
|
|
char res3[0x10];
|
|
ushort sit_piscr;
|
|
char res4[2];
|
|
uint sit_pitc;
|
|
uint sit_pitr;
|
|
char res5[0x34];
|
|
} sit8xx_t;
|
|
|
|
#define TBSCR_TBIRQ_MASK ((ushort)0xff00)
|
|
#define TBSCR_REFA ((ushort)0x0080)
|
|
#define TBSCR_REFB ((ushort)0x0040)
|
|
#define TBSCR_REFAE ((ushort)0x0008)
|
|
#define TBSCR_REFBE ((ushort)0x0004)
|
|
#define TBSCR_TBF ((ushort)0x0002)
|
|
#define TBSCR_TBE ((ushort)0x0001)
|
|
|
|
#define RTCSC_RTCIRQ_MASK ((ushort)0xff00)
|
|
#define RTCSC_SEC ((ushort)0x0080)
|
|
#define RTCSC_ALR ((ushort)0x0040)
|
|
#define RTCSC_38K ((ushort)0x0010)
|
|
#define RTCSC_SIE ((ushort)0x0008)
|
|
#define RTCSC_ALE ((ushort)0x0004)
|
|
#define RTCSC_RTF ((ushort)0x0002)
|
|
#define RTCSC_RTE ((ushort)0x0001)
|
|
|
|
#define PISCR_PIRQ_MASK ((ushort)0xff00)
|
|
#define PISCR_PS ((ushort)0x0080)
|
|
#define PISCR_PIE ((ushort)0x0004)
|
|
#define PISCR_PTF ((ushort)0x0002)
|
|
#define PISCR_PTE ((ushort)0x0001)
|
|
|
|
/* Clocks and Reset.
|
|
*/
|
|
typedef struct clk_and_reset {
|
|
uint car_sccr;
|
|
uint car_plprcr;
|
|
uint car_rsr;
|
|
char res[0x74]; /* Reserved area */
|
|
} car8xx_t;
|
|
|
|
/* System Integration Timers keys.
|
|
*/
|
|
typedef struct sitk {
|
|
uint sitk_tbscrk;
|
|
uint sitk_tbreff0k;
|
|
uint sitk_tbreff1k;
|
|
uint sitk_tbk;
|
|
char res1[0x10];
|
|
uint sitk_rtcsck;
|
|
uint sitk_rtck;
|
|
uint sitk_rtseck;
|
|
uint sitk_rtcalk;
|
|
char res2[0x10];
|
|
uint sitk_piscrk;
|
|
uint sitk_pitck;
|
|
char res3[0x38];
|
|
} sitk8xx_t;
|
|
|
|
/* Clocks and reset keys.
|
|
*/
|
|
typedef struct cark {
|
|
uint cark_sccrk;
|
|
uint cark_plprcrk;
|
|
uint cark_rsrk;
|
|
char res[0x474];
|
|
} cark8xx_t;
|
|
|
|
/* The key to unlock registers maintained by keep-alive power.
|
|
*/
|
|
#define KAPWR_KEY ((unsigned int)0x55ccaa33)
|
|
|
|
/* Video interface. MPC823 Only.
|
|
*/
|
|
typedef struct vid823 {
|
|
ushort vid_vccr;
|
|
ushort res1;
|
|
u_char vid_vsr;
|
|
u_char res2;
|
|
u_char vid_vcmr;
|
|
u_char res3;
|
|
uint vid_vbcb;
|
|
uint res4;
|
|
uint vid_vfcr0;
|
|
uint vid_vfaa0;
|
|
uint vid_vfba0;
|
|
uint vid_vfcr1;
|
|
uint vid_vfaa1;
|
|
uint vid_vfba1;
|
|
u_char res5[0x18];
|
|
} vid823_t;
|
|
|
|
/* LCD interface. 823 Only.
|
|
*/
|
|
typedef struct lcd {
|
|
uint lcd_lccr;
|
|
uint lcd_lchcr;
|
|
uint lcd_lcvcr;
|
|
char res1[4];
|
|
uint lcd_lcfaa;
|
|
uint lcd_lcfba;
|
|
char lcd_lcsr;
|
|
char res2[0x7];
|
|
} lcd823_t;
|
|
|
|
/* I2C
|
|
*/
|
|
typedef struct i2c {
|
|
u_char i2c_i2mod;
|
|
char res1[3];
|
|
u_char i2c_i2add;
|
|
char res2[3];
|
|
u_char i2c_i2brg;
|
|
char res3[3];
|
|
u_char i2c_i2com;
|
|
char res4[3];
|
|
u_char i2c_i2cer;
|
|
char res5[3];
|
|
u_char i2c_i2cmr;
|
|
char res6[0x8b];
|
|
} i2c8xx_t;
|
|
|
|
/* DMA control/status registers.
|
|
*/
|
|
typedef struct sdma_csr {
|
|
char res1[4];
|
|
uint sdma_sdar;
|
|
u_char sdma_sdsr;
|
|
char res3[3];
|
|
u_char sdma_sdmr;
|
|
char res4[3];
|
|
u_char sdma_idsr1;
|
|
char res5[3];
|
|
u_char sdma_idmr1;
|
|
char res6[3];
|
|
u_char sdma_idsr2;
|
|
char res7[3];
|
|
u_char sdma_idmr2;
|
|
char res8[0x13];
|
|
} sdma8xx_t;
|
|
|
|
/* Communication Processor Module Interrupt Controller.
|
|
*/
|
|
typedef struct cpm_ic {
|
|
ushort cpic_civr;
|
|
char res[0xe];
|
|
uint cpic_cicr;
|
|
uint cpic_cipr;
|
|
uint cpic_cimr;
|
|
uint cpic_cisr;
|
|
} cpic8xx_t;
|
|
|
|
/* Input/Output Port control/status registers.
|
|
*/
|
|
typedef struct io_port {
|
|
ushort iop_padir;
|
|
ushort iop_papar;
|
|
ushort iop_paodr;
|
|
ushort iop_padat;
|
|
char res1[8];
|
|
ushort iop_pcdir;
|
|
ushort iop_pcpar;
|
|
ushort iop_pcso;
|
|
ushort iop_pcdat;
|
|
ushort iop_pcint;
|
|
char res2[6];
|
|
ushort iop_pddir;
|
|
ushort iop_pdpar;
|
|
char res3[2];
|
|
ushort iop_pddat;
|
|
uint utmode;
|
|
char res4[4];
|
|
} iop8xx_t;
|
|
|
|
/* Communication Processor Module Timers
|
|
*/
|
|
typedef struct cpm_timers {
|
|
ushort cpmt_tgcr;
|
|
char res1[0xe];
|
|
ushort cpmt_tmr1;
|
|
ushort cpmt_tmr2;
|
|
ushort cpmt_trr1;
|
|
ushort cpmt_trr2;
|
|
ushort cpmt_tcr1;
|
|
ushort cpmt_tcr2;
|
|
ushort cpmt_tcn1;
|
|
ushort cpmt_tcn2;
|
|
ushort cpmt_tmr3;
|
|
ushort cpmt_tmr4;
|
|
ushort cpmt_trr3;
|
|
ushort cpmt_trr4;
|
|
ushort cpmt_tcr3;
|
|
ushort cpmt_tcr4;
|
|
ushort cpmt_tcn3;
|
|
ushort cpmt_tcn4;
|
|
ushort cpmt_ter1;
|
|
ushort cpmt_ter2;
|
|
ushort cpmt_ter3;
|
|
ushort cpmt_ter4;
|
|
char res2[8];
|
|
} cpmtimer8xx_t;
|
|
|
|
/* Finally, the Communication Processor stuff.....
|
|
*/
|
|
typedef struct scc { /* Serial communication channels */
|
|
uint scc_gsmrl;
|
|
uint scc_gsmrh;
|
|
ushort scc_psmr;
|
|
char res1[2];
|
|
ushort scc_todr;
|
|
ushort scc_dsr;
|
|
ushort scc_scce;
|
|
char res2[2];
|
|
ushort scc_sccm;
|
|
char res3;
|
|
u_char scc_sccs;
|
|
char res4[8];
|
|
} scc_t;
|
|
|
|
typedef struct smc { /* Serial management channels */
|
|
char res1[2];
|
|
ushort smc_smcmr;
|
|
char res2[2];
|
|
u_char smc_smce;
|
|
char res3[3];
|
|
u_char smc_smcm;
|
|
char res4[5];
|
|
} smc_t;
|
|
|
|
/* MPC860T Fast Ethernet Controller. It isn't part of the CPM, but
|
|
* it fits within the address space.
|
|
*/
|
|
|
|
typedef struct fec {
|
|
uint fec_addr_low; /* lower 32 bits of station address */
|
|
ushort fec_addr_high; /* upper 16 bits of station address */
|
|
ushort res1; /* reserved */
|
|
uint fec_hash_table_high; /* upper 32-bits of hash table */
|
|
uint fec_hash_table_low; /* lower 32-bits of hash table */
|
|
uint fec_r_des_start; /* beginning of Rx descriptor ring */
|
|
uint fec_x_des_start; /* beginning of Tx descriptor ring */
|
|
uint fec_r_buff_size; /* Rx buffer size */
|
|
uint res2[9]; /* reserved */
|
|
uint fec_ecntrl; /* ethernet control register */
|
|
uint fec_ievent; /* interrupt event register */
|
|
uint fec_imask; /* interrupt mask register */
|
|
uint fec_ivec; /* interrupt level and vector status */
|
|
uint fec_r_des_active; /* Rx ring updated flag */
|
|
uint fec_x_des_active; /* Tx ring updated flag */
|
|
uint res3[10]; /* reserved */
|
|
uint fec_mii_data; /* MII data register */
|
|
uint fec_mii_speed; /* MII speed control register */
|
|
uint res4[17]; /* reserved */
|
|
uint fec_r_bound; /* end of RAM (read-only) */
|
|
uint fec_r_fstart; /* Rx FIFO start address */
|
|
uint res5[6]; /* reserved */
|
|
uint fec_x_fstart; /* Tx FIFO start address */
|
|
uint res6[17]; /* reserved */
|
|
uint fec_fun_code; /* fec SDMA function code */
|
|
uint res7[3]; /* reserved */
|
|
uint fec_r_cntrl; /* Rx control register */
|
|
uint fec_r_hash; /* Rx hash register */
|
|
uint res8[14]; /* reserved */
|
|
uint fec_x_cntrl; /* Tx control register */
|
|
uint res9[0x1e]; /* reserved */
|
|
} fec_t;
|
|
|
|
/* The FEC and LCD color map share the same address space....
|
|
* I guess we will never see an 823T :-).
|
|
*/
|
|
union fec_lcd {
|
|
fec_t fl_un_fec;
|
|
u_char fl_un_cmap[0x200];
|
|
};
|
|
|
|
typedef struct comm_proc {
|
|
/* General control and status registers.
|
|
*/
|
|
ushort cp_cpcr;
|
|
u_char res1[2];
|
|
ushort cp_rccr;
|
|
u_char res2;
|
|
u_char cp_rmds;
|
|
u_char res3[4];
|
|
ushort cp_cpmcr1;
|
|
ushort cp_cpmcr2;
|
|
ushort cp_cpmcr3;
|
|
ushort cp_cpmcr4;
|
|
u_char res4[2];
|
|
ushort cp_rter;
|
|
u_char res5[2];
|
|
ushort cp_rtmr;
|
|
u_char res6[0x14];
|
|
|
|
/* Baud rate generators.
|
|
*/
|
|
uint cp_brgc1;
|
|
uint cp_brgc2;
|
|
uint cp_brgc3;
|
|
uint cp_brgc4;
|
|
|
|
/* Serial Communication Channels.
|
|
*/
|
|
scc_t cp_scc[4];
|
|
|
|
/* Serial Management Channels.
|
|
*/
|
|
smc_t cp_smc[2];
|
|
|
|
/* Serial Peripheral Interface.
|
|
*/
|
|
ushort cp_spmode;
|
|
u_char res7[4];
|
|
u_char cp_spie;
|
|
u_char res8[3];
|
|
u_char cp_spim;
|
|
u_char res9[2];
|
|
u_char cp_spcom;
|
|
u_char res10[2];
|
|
|
|
/* Parallel Interface Port.
|
|
*/
|
|
u_char res11[2];
|
|
ushort cp_pipc;
|
|
u_char res12[2];
|
|
ushort cp_ptpr;
|
|
uint cp_pbdir;
|
|
uint cp_pbpar;
|
|
u_char res13[2];
|
|
ushort cp_pbodr;
|
|
uint cp_pbdat;
|
|
|
|
/* Port E - MPC87x/88x only.
|
|
*/
|
|
uint cp_pedir;
|
|
uint cp_pepar;
|
|
uint cp_peso;
|
|
uint cp_peodr;
|
|
uint cp_pedat;
|
|
|
|
/* Communications Processor Timing Register -
|
|
Contains RMII Timing for the FECs on MPC87x/88x only.
|
|
*/
|
|
uint cp_cptr;
|
|
|
|
/* Serial Interface and Time Slot Assignment.
|
|
*/
|
|
uint cp_simode;
|
|
u_char cp_sigmr;
|
|
u_char res15;
|
|
u_char cp_sistr;
|
|
u_char cp_sicmr;
|
|
u_char res16[4];
|
|
uint cp_sicr;
|
|
uint cp_sirp;
|
|
u_char res17[0xc];
|
|
|
|
/* 256 bytes of MPC823 video controller RAM array.
|
|
*/
|
|
u_char cp_vcram[0x100];
|
|
u_char cp_siram[0x200];
|
|
|
|
/* The fast ethernet controller is not really part of the CPM,
|
|
* but it resides in the address space.
|
|
* The LCD color map is also here.
|
|
*/
|
|
union fec_lcd fl_un;
|
|
#define cp_fec fl_un.fl_un_fec
|
|
#define lcd_cmap fl_un.fl_un_cmap
|
|
char res18[0xE00];
|
|
|
|
/* The DUET family has a second FEC here */
|
|
fec_t cp_fec2;
|
|
#define cp_fec1 cp_fec /* consistency macro */
|
|
|
|
/* Dual Ported RAM follows.
|
|
* There are many different formats for this memory area
|
|
* depending upon the devices used and options chosen.
|
|
* Some processors don't have all of it populated.
|
|
*/
|
|
u_char cp_dpmem[0x1C00]; /* BD / Data / ucode */
|
|
u_char cp_dparam[0x400]; /* Parameter RAM */
|
|
} cpm8xx_t;
|
|
|
|
/* Internal memory map.
|
|
*/
|
|
typedef struct immap {
|
|
sysconf8xx_t im_siu_conf; /* SIU Configuration */
|
|
pcmconf8xx_t im_pcmcia; /* PCMCIA Configuration */
|
|
memctl8xx_t im_memctl; /* Memory Controller */
|
|
sit8xx_t im_sit; /* System integration timers */
|
|
car8xx_t im_clkrst; /* Clocks and reset */
|
|
sitk8xx_t im_sitk; /* Sys int timer keys */
|
|
cark8xx_t im_clkrstk; /* Clocks and reset keys */
|
|
vid823_t im_vid; /* Video (823 only) */
|
|
lcd823_t im_lcd; /* LCD (823 only) */
|
|
i2c8xx_t im_i2c; /* I2C control/status */
|
|
sdma8xx_t im_sdma; /* SDMA control/status */
|
|
cpic8xx_t im_cpic; /* CPM Interrupt Controller */
|
|
iop8xx_t im_ioport; /* IO Port control/status */
|
|
cpmtimer8xx_t im_cpmtimer; /* CPM timers */
|
|
cpm8xx_t im_cpm; /* Communication processor */
|
|
} immap_t;
|
|
|
|
#endif /* __IMMAP_8XX__ */
|
|
#endif /* __KERNEL__ */
|