mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
d524dac927
The device tree is used by more than just PowerPC. Make the documentation
directory available to all.
v2: reorganized files while moving to create arch and driver specific
directories.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
71 lines
2.1 KiB
Plaintext
71 lines
2.1 KiB
Plaintext
MPC5121 PSC Device Tree Bindings
|
|
|
|
PSC in UART mode
|
|
----------------
|
|
|
|
For PSC in UART mode the needed PSC serial devices
|
|
are specified by fsl,mpc5121-psc-uart nodes in the
|
|
fsl,mpc5121-immr SoC node. Additionally the PSC FIFO
|
|
Controller node fsl,mpc5121-psc-fifo is requered there:
|
|
|
|
fsl,mpc5121-psc-uart nodes
|
|
--------------------------
|
|
|
|
Required properties :
|
|
- compatible : Should contain "fsl,mpc5121-psc-uart" and "fsl,mpc5121-psc"
|
|
- cell-index : Index of the PSC in hardware
|
|
- reg : Offset and length of the register set for the PSC device
|
|
- interrupts : <a b> where a is the interrupt number of the
|
|
PSC FIFO Controller and b is a field that represents an
|
|
encoding of the sense and level information for the interrupt.
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
|
|
Recommended properties :
|
|
- fsl,rx-fifo-size : the size of the RX fifo slice (a multiple of 4)
|
|
- fsl,tx-fifo-size : the size of the TX fifo slice (a multiple of 4)
|
|
|
|
|
|
fsl,mpc5121-psc-fifo node
|
|
-------------------------
|
|
|
|
Required properties :
|
|
- compatible : Should be "fsl,mpc5121-psc-fifo"
|
|
- reg : Offset and length of the register set for the PSC
|
|
FIFO Controller
|
|
- interrupts : <a b> where a is the interrupt number of the
|
|
PSC FIFO Controller and b is a field that represents an
|
|
encoding of the sense and level information for the interrupt.
|
|
- interrupt-parent : the phandle for the interrupt controller that
|
|
services interrupts for this device.
|
|
|
|
|
|
Example for a board using PSC0 and PSC1 devices in serial mode:
|
|
|
|
serial@11000 {
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
cell-index = <0>;
|
|
reg = <0x11000 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl,rx-fifo-size = <16>;
|
|
fsl,tx-fifo-size = <16>;
|
|
};
|
|
|
|
serial@11100 {
|
|
compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
|
|
cell-index = <1>;
|
|
reg = <0x11100 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
fsl,rx-fifo-size = <16>;
|
|
fsl,tx-fifo-size = <16>;
|
|
};
|
|
|
|
pscfifo@11f00 {
|
|
compatible = "fsl,mpc5121-psc-fifo";
|
|
reg = <0x11f00 0x100>;
|
|
interrupts = <40 0x8>;
|
|
interrupt-parent = < &ipic >;
|
|
};
|