2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
linux-next/drivers/gpio/gpio-spear-spics.c
Enrico Weigelt, metux IT consult 7290f152fe drivers: gpio: spear-spics: use devm_platform_ioremap_resource()
Use the new helper that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.

Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-04-05 00:04:27 +07:00

198 lines
5.2 KiB
C

/*
* SPEAr platform SPI chipselect abstraction over gpiolib
*
* Copyright (C) 2012 ST Microelectronics
* Shiraz Hashim <shiraz.linux.kernel@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/types.h>
/* maximum chipselects */
#define NUM_OF_GPIO 4
/*
* Provision is available on some SPEAr SoCs to control ARM PL022 spi cs
* through system registers. This register lies outside spi (pl022)
* address space into system registers.
*
* It provides control for spi chip select lines so that any chipselect
* (out of 4 possible chipselects in pl022) can be made low to select
* the particular slave.
*/
/**
* struct spear_spics - represents spi chip select control
* @base: base address
* @perip_cfg: configuration register
* @sw_enable_bit: bit to enable s/w control over chipselects
* @cs_value_bit: bit to program high or low chipselect
* @cs_enable_mask: mask to select bits required to select chipselect
* @cs_enable_shift: bit pos of cs_enable_mask
* @use_count: use count of a spi controller cs lines
* @last_off: stores last offset caller of set_value()
* @chip: gpio_chip abstraction
*/
struct spear_spics {
void __iomem *base;
u32 perip_cfg;
u32 sw_enable_bit;
u32 cs_value_bit;
u32 cs_enable_mask;
u32 cs_enable_shift;
unsigned long use_count;
int last_off;
struct gpio_chip chip;
};
/* gpio framework specific routines */
static int spics_get_value(struct gpio_chip *chip, unsigned offset)
{
return -ENXIO;
}
static void spics_set_value(struct gpio_chip *chip, unsigned offset, int value)
{
struct spear_spics *spics = gpiochip_get_data(chip);
u32 tmp;
/* select chip select from register */
tmp = readl_relaxed(spics->base + spics->perip_cfg);
if (spics->last_off != offset) {
spics->last_off = offset;
tmp &= ~(spics->cs_enable_mask << spics->cs_enable_shift);
tmp |= offset << spics->cs_enable_shift;
}
/* toggle chip select line */
tmp &= ~(0x1 << spics->cs_value_bit);
tmp |= value << spics->cs_value_bit;
writel_relaxed(tmp, spics->base + spics->perip_cfg);
}
static int spics_direction_input(struct gpio_chip *chip, unsigned offset)
{
return -ENXIO;
}
static int spics_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
spics_set_value(chip, offset, value);
return 0;
}
static int spics_request(struct gpio_chip *chip, unsigned offset)
{
struct spear_spics *spics = gpiochip_get_data(chip);
u32 tmp;
if (!spics->use_count++) {
tmp = readl_relaxed(spics->base + spics->perip_cfg);
tmp |= 0x1 << spics->sw_enable_bit;
tmp |= 0x1 << spics->cs_value_bit;
writel_relaxed(tmp, spics->base + spics->perip_cfg);
}
return 0;
}
static void spics_free(struct gpio_chip *chip, unsigned offset)
{
struct spear_spics *spics = gpiochip_get_data(chip);
u32 tmp;
if (!--spics->use_count) {
tmp = readl_relaxed(spics->base + spics->perip_cfg);
tmp &= ~(0x1 << spics->sw_enable_bit);
writel_relaxed(tmp, spics->base + spics->perip_cfg);
}
}
static int spics_gpio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct spear_spics *spics;
int ret;
spics = devm_kzalloc(&pdev->dev, sizeof(*spics), GFP_KERNEL);
if (!spics)
return -ENOMEM;
spics->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(spics->base))
return PTR_ERR(spics->base);
if (of_property_read_u32(np, "st-spics,peripcfg-reg",
&spics->perip_cfg))
goto err_dt_data;
if (of_property_read_u32(np, "st-spics,sw-enable-bit",
&spics->sw_enable_bit))
goto err_dt_data;
if (of_property_read_u32(np, "st-spics,cs-value-bit",
&spics->cs_value_bit))
goto err_dt_data;
if (of_property_read_u32(np, "st-spics,cs-enable-mask",
&spics->cs_enable_mask))
goto err_dt_data;
if (of_property_read_u32(np, "st-spics,cs-enable-shift",
&spics->cs_enable_shift))
goto err_dt_data;
platform_set_drvdata(pdev, spics);
spics->chip.ngpio = NUM_OF_GPIO;
spics->chip.base = -1;
spics->chip.request = spics_request;
spics->chip.free = spics_free;
spics->chip.direction_input = spics_direction_input;
spics->chip.direction_output = spics_direction_output;
spics->chip.get = spics_get_value;
spics->chip.set = spics_set_value;
spics->chip.label = dev_name(&pdev->dev);
spics->chip.parent = &pdev->dev;
spics->chip.owner = THIS_MODULE;
spics->last_off = -1;
ret = devm_gpiochip_add_data(&pdev->dev, &spics->chip, spics);
if (ret) {
dev_err(&pdev->dev, "unable to add gpio chip\n");
return ret;
}
dev_info(&pdev->dev, "spear spics registered\n");
return 0;
err_dt_data:
dev_err(&pdev->dev, "DT probe failed\n");
return -EINVAL;
}
static const struct of_device_id spics_gpio_of_match[] = {
{ .compatible = "st,spear-spics-gpio" },
{}
};
static struct platform_driver spics_gpio_driver = {
.probe = spics_gpio_probe,
.driver = {
.name = "spear-spics-gpio",
.of_match_table = spics_gpio_of_match,
},
};
static int __init spics_gpio_init(void)
{
return platform_driver_register(&spics_gpio_driver);
}
subsys_initcall(spics_gpio_init);