renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code
0300b3321d
linux-next/drivers/net/wireless/p54common.h
Michael Wu eff1a59c48 [P54]: add mac80211-based driver for prism54 softmac hardware 
Signed-off-by: Michael Wu <flamingice@sourmilk.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:51:42 -07:00

330 lines
7.1 KiB
C
Raw Blame History

#ifndef PRISM54COMMON_H
#define PRISM54COMMON_H
/*
* Common code specific definitions for mac80211 Prism54 drivers
*
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
* Copyright (c) 2007, Christian Lamparter <chunkeey@web.de>
*
* Based on the islsm (softmac prism54) driver, which is:
* Copyright 2004-2006 Jean-Baptiste Note <jbnote@gmail.com>, et al.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
struct bootrec {
__le32 code;
__le32 len;
u32 data[0];
} __attribute__((packed));
struct bootrec_exp_if {
__le16 role;
__le16 if_id;
__le16 variant;
__le16 btm_compat;
__le16 top_compat;
} __attribute__((packed));
#define BR_CODE_MIN 0x80000000
#define BR_CODE_COMPONENT_ID 0x80000001
#define BR_CODE_COMPONENT_VERSION 0x80000002
#define BR_CODE_DEPENDENT_IF 0x80000003
#define BR_CODE_EXPOSED_IF 0x80000004
#define BR_CODE_DESCR 0x80000101
#define BR_CODE_MAX 0x8FFFFFFF
#define BR_CODE_END_OF_BRA 0xFF0000FF
#define LEGACY_BR_CODE_END_OF_BRA 0xFFFFFFFF
#define FW_FMAC 0x464d4143
#define FW_LM86 0x4c4d3836
#define FW_LM87 0x4c4d3837
#define FW_LM20 0x4c4d3230
/* PDA defines are Copyright (C) 2005 Nokia Corporation (taken from islsm_pda.h) */
struct pda_entry {
__le16 len; /* includes both code and data */
__le16 code;
u8 data[0];
} __attribute__ ((packed));
struct eeprom_pda_wrap {
u32 magic;
u16 pad;
u16 len;
u32 arm_opcode;
u8 data[0];
} __attribute__ ((packed));
struct pda_iq_autocal_entry {
__le16 freq;
__le16 iq_param[4];
} __attribute__ ((packed));
struct pda_channel_output_limit {
__le16 freq;
u8 val_bpsk;
u8 val_qpsk;
u8 val_16qam;
u8 val_64qam;
u8 rate_set_mask;
u8 rate_set_size;
} __attribute__ ((packed));
struct pda_pa_curve_data_sample_rev0 {
u8 rf_power;
u8 pa_detector;
u8 pcv;
} __attribute__ ((packed));
struct pda_pa_curve_data_sample_rev1 {
u8 rf_power;
u8 pa_detector;
u8 data_barker;
u8 data_bpsk;
u8 data_qpsk;
u8 data_16qam;
u8 data_64qam;
u8 padding;
} __attribute__ ((packed));
struct pda_pa_curve_data {
u8 cal_method_rev;
u8 channels;
u8 points_per_channel;
u8 padding;
u8 data[0];
} __attribute__ ((packed));
/*
* this defines the PDR codes used to build PDAs as defined in document
* number 553155. The current implementation mirrors version 1.1 of the
* document and lists only PDRs supported by the ARM platform.
*/
/* common and choice range (0x0000 - 0x0fff) */
#define PDR_END 0x0000
#define PDR_MANUFACTURING_PART_NUMBER 0x0001
#define PDR_PDA_VERSION 0x0002
#define PDR_NIC_SERIAL_NUMBER 0x0003
#define PDR_MAC_ADDRESS 0x0101
#define PDR_REGULATORY_DOMAIN_LIST 0x0103
#define PDR_TEMPERATURE_TYPE 0x0107
#define PDR_PRISM_PCI_IDENTIFIER 0x0402
/* ARM range (0x1000 - 0x1fff) */
#define PDR_COUNTRY_INFORMATION 0x1000
#define PDR_INTERFACE_LIST 0x1001
#define PDR_HARDWARE_PLATFORM_COMPONENT_ID 0x1002
#define PDR_OEM_NAME 0x1003
#define PDR_PRODUCT_NAME 0x1004
#define PDR_UTF8_OEM_NAME 0x1005
#define PDR_UTF8_PRODUCT_NAME 0x1006
#define PDR_COUNTRY_LIST 0x1007
#define PDR_DEFAULT_COUNTRY 0x1008
#define PDR_ANTENNA_GAIN 0x1100
#define PDR_PRISM_INDIGO_PA_CALIBRATION_DATA 0x1901
#define PDR_RSSI_LINEAR_APPROXIMATION 0x1902
#define PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS 0x1903
#define PDR_PRISM_PA_CAL_CURVE_DATA 0x1904
#define PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND 0x1905
#define PDR_PRISM_ZIF_TX_IQ_CALIBRATION 0x1906
#define PDR_REGULATORY_POWER_LIMITS 0x1907
#define PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED 0x1908
#define PDR_RADIATED_TRANSMISSION_CORRECTION 0x1909
#define PDR_PRISM_TX_IQ_CALIBRATION 0x190a
/* reserved range (0x2000 - 0x7fff) */
/* customer range (0x8000 - 0xffff) */
#define PDR_BASEBAND_REGISTERS 0x8000
#define PDR_PER_CHANNEL_BASEBAND_REGISTERS 0x8001
/* stored in skb->cb */
struct memrecord {
u32 start_addr;
u32 end_addr;
struct ieee80211_tx_control *control;
};
struct p54_eeprom_lm86 {
__le16 offset;
__le16 len;
u8 data[0];
} __attribute__ ((packed));
struct p54_rx_hdr {
__le16 magic;
__le16 len;
__le16 freq;
u8 antenna;
u8 rate;
u8 rssi;
u8 quality;
u16 unknown2;
__le64 timestamp;
u8 data[0];
} __attribute__ ((packed));
struct p54_frame_sent_hdr {
u8 status;
u8 retries;
__le16 ack_rssi;
__le16 seq;
u16 rate;
} __attribute__ ((packed));
struct p54_tx_control_allocdata {
u8 rateset[8];
u16 padding;
u8 wep_key_present;
u8 wep_key_len;
u8 wep_key[16];
__le32 frame_type;
u32 padding2;
__le16 magic4;
u8 antenna;
u8 output_power;
__le32 magic5;
u8 align[0];
} __attribute__ ((packed));
struct p54_tx_control_filter {
__le16 filter_type;
u8 dst[ETH_ALEN];
u8 src[ETH_ALEN];
u8 antenna;
u8 debug;
__le32 magic3;
u8 rates[8]; // FIXME: what's this for?
__le32 rx_addr;
__le16 max_rx;
__le16 rxhw;
__le16 magic8;
__le16 magic9;
} __attribute__ ((packed));
struct p54_tx_control_channel {
__le16 magic1;
__le16 magic2;
u8 padding1[20];
struct pda_iq_autocal_entry iq_autocal;
u8 pa_points_per_curve;
u8 val_barker;
u8 val_bpsk;
u8 val_qpsk;
u8 val_16qam;
u8 val_64qam;
struct pda_pa_curve_data_sample_rev1 curve_data[0];
/* additional padding/data after curve_data */
} __attribute__ ((packed));
struct p54_tx_control_led {
__le16 mode;
__le16 led_temporary;
__le16 led_permanent;
__le16 duration;
} __attribute__ ((packed));
struct p54_tx_vdcf_queues {
__le16 aifs;
__le16 cwmin;
__le16 cwmax;
__le16 txop;
} __attribute__ ((packed));
struct p54_tx_control_vdcf {
u8 padding;
u8 slottime;
u8 magic1;
u8 magic2;
struct p54_tx_vdcf_queues queue[8];
u8 pad2[4];
__le16 frameburst;
} __attribute__ ((packed));
static const struct ieee80211_rate p54_rates[] = {
{ .rate = 10,
.val = 0,
.val2 = 0x10,
.flags = IEEE80211_RATE_CCK_2 },
{ .rate = 20,
.val = 1,
.val2 = 0x11,
.flags = IEEE80211_RATE_CCK_2 },
{ .rate = 55,
.val = 2,
.val2 = 0x12,
.flags = IEEE80211_RATE_CCK_2 },
{ .rate = 110,
.val = 3,
.val2 = 0x13,
.flags = IEEE80211_RATE_CCK_2 },
{ .rate = 60,
.val = 4,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 90,
.val = 5,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 120,
.val = 6,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 180,
.val = 7,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 240,
.val = 8,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 360,
.val = 9,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 480,
.val = 10,
.flags = IEEE80211_RATE_OFDM },
{ .rate = 540,
.val = 11,
.flags = IEEE80211_RATE_OFDM },
};
// TODO: just generate this..
static const struct ieee80211_channel p54_channels[] = {
{ .chan = 1,
.freq = 2412},
{ .chan = 2,
.freq = 2417},
{ .chan = 3,
.freq = 2422},
{ .chan = 4,
.freq = 2427},
{ .chan = 5,
.freq = 2432},
{ .chan = 6,
.freq = 2437},
{ .chan = 7,
.freq = 2442},
{ .chan = 8,
.freq = 2447},
{ .chan = 9,
.freq = 2452},
{ .chan = 10,
.freq = 2457},
{ .chan = 11,
.freq = 2462},
{ .chan = 12,
.freq = 2467},
{ .chan = 13,
.freq = 2472},
{ .chan = 14,
.freq = 2484}
};
#endif /* PRISM54COMMON_H */
View Git Blame Copy Permalink