mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
8b7c3b6810
This new driver registers the NXP ISP1301 chip via the I2C subsystem. The chip is the USB transceiver shared by ohci-nxp, lpc32xx_udc (gadget) and isp1301_omap. ISP1301 is a very low-level driver that primarily separates out the I2C client registration of the ISP1301 chip (including instantiation via DT), used by other drivers, and declares the chip's registers. It's only a helper driver for some OHCI and USB device drivers. The driver can be considered as a register set extension of ohci-nxp, lpc32xx-udc and isp1301_omap, which in turn know best what to do with the low level functionality (individual ISP1301 registers and timing, see the different initialization strategies in those drivers). Those drivers previously internally duplicated ISP1301 register definitions which is solved by this new isp1301 driver. The ISP1301 registers exposed via isp1301.h can be accessed by other drivers using it with standard i2c_smbus_*() accesses. Following patches let the respective USB host and gadget drivers use this driver, instead of duplicating ISP1301 handling. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
81 lines
2.3 KiB
C
81 lines
2.3 KiB
C
/*
|
|
* NXP ISP1301 USB transceiver driver
|
|
*
|
|
* Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef __LINUX_USB_ISP1301_H
|
|
#define __LINUX_USB_ISP1301_H
|
|
|
|
#include <linux/of.h>
|
|
|
|
/* I2C Register definitions: */
|
|
|
|
#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
|
|
|
|
#define MC1_SPEED_REG (1 << 0)
|
|
#define MC1_SUSPEND_REG (1 << 1)
|
|
#define MC1_DAT_SE0 (1 << 2)
|
|
#define MC1_TRANSPARENT (1 << 3)
|
|
#define MC1_BDIS_ACON_EN (1 << 4)
|
|
#define MC1_OE_INT_EN (1 << 5)
|
|
#define MC1_UART_EN (1 << 6)
|
|
#define MC1_MASK 0x7f
|
|
|
|
#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
|
|
|
|
#define MC2_GLOBAL_PWR_DN (1 << 0)
|
|
#define MC2_SPD_SUSP_CTRL (1 << 1)
|
|
#define MC2_BI_DI (1 << 2)
|
|
#define MC2_TRANSP_BDIR0 (1 << 3)
|
|
#define MC2_TRANSP_BDIR1 (1 << 4)
|
|
#define MC2_AUDIO_EN (1 << 5)
|
|
#define MC2_PSW_EN (1 << 6)
|
|
#define MC2_EN2V7 (1 << 7)
|
|
|
|
#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
|
|
|
|
#define OTG1_DP_PULLUP (1 << 0)
|
|
#define OTG1_DM_PULLUP (1 << 1)
|
|
#define OTG1_DP_PULLDOWN (1 << 2)
|
|
#define OTG1_DM_PULLDOWN (1 << 3)
|
|
#define OTG1_ID_PULLDOWN (1 << 4)
|
|
#define OTG1_VBUS_DRV (1 << 5)
|
|
#define OTG1_VBUS_DISCHRG (1 << 6)
|
|
#define OTG1_VBUS_CHRG (1 << 7)
|
|
|
|
#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */
|
|
|
|
#define OTG_B_SESS_END (1 << 6)
|
|
#define OTG_B_SESS_VLD (1 << 7)
|
|
|
|
#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
|
|
#define ISP1301_I2C_INTERRUPT_LATCH 0xA
|
|
#define ISP1301_I2C_INTERRUPT_FALLING 0xC
|
|
#define ISP1301_I2C_INTERRUPT_RISING 0xE
|
|
|
|
#define INT_VBUS_VLD (1 << 0)
|
|
#define INT_SESS_VLD (1 << 1)
|
|
#define INT_DP_HI (1 << 2)
|
|
#define INT_ID_GND (1 << 3)
|
|
#define INT_DM_HI (1 << 4)
|
|
#define INT_ID_FLOAT (1 << 5)
|
|
#define INT_BDIS_ACON (1 << 6)
|
|
#define INT_CR_INT (1 << 7)
|
|
|
|
#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */
|
|
|
|
struct i2c_client *isp1301_get_client(struct device_node *node);
|
|
|
|
#endif /* __LINUX_USB_ISP1301_H */
|