Marcin Niestroj 01d1f7a99e iio: bmi160: Fix time needed to sleep after command execution ... Datasheet specifies typical and maximum execution times for which CMD register is occupied after previous command execution. We took these values as minimum and maximum time for usleep_range() call before making a new command execution. To be sure, that the CMD register is no longer occupied we need to wait *at least* the maximum time specified by datasheet. Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2016-12-30 10:52:00 +00:00
..
accel	iio: accel: st_accel: inline per-sensor data	2016-11-19 12:25:36 +00:00
adc	iio: adc: Add support for STM32 ADC	2016-11-19 12:18:33 +00:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: add resource managed triggered buffer init helpers	2016-09-04 15:42:46 +01:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	Third set of IIO new device support, features and cleanup for the 4.10 cycle.	2016-11-16 17:20:40 +01:00
counter	iio: 104-quad-8: Fix active level mismatch for the preset enable option	2016-12-03 10:08:09 +00:00
dac	iio: dpot-dac: DAC driver based on a digital potentiometer	2016-11-13 13:07:15 +00:00
dummy	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: gyro: st_gyro: inline per-sensor data	2016-11-12 15:38:09 +00:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	iio: si7020: Add devicetree support and trivial bindings	2016-11-01 18:49:53 +00:00
imu	iio: bmi160: Fix time needed to sleep after command execution	2016-12-30 10:52:00 +00:00
light	iio: tsl2583: make array large enough	2016-11-24 20:09:55 +00:00
magnetometer	iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor	2016-11-24 20:41:30 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: mcp4531: provide range of available raw values	2016-11-13 11:40:26 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: pressure: st_pressure: inline per-sensor data	2016-11-12 15:50:10 +00:00
proximity	iio: proximity: pulsedlight-lidar-lite-v2: cleanup power management	2016-10-23 19:34:26 +01:00
temperature	iio: maxim_thermocouple: detect invalid storage size in read()	2016-11-13 10:08:32 +01:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio: Use kmalloc_array() in iio_scan_mask_set()	2016-09-24 16:35:24 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio:core: add a callback to allow drivers to provide _available attributes	2016-11-13 11:40:25 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: add helpers to query available values from channels	2016-11-13 11:40:26 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00