mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
48c926cd34
Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
30 lines
1004 B
Plaintext
30 lines
1004 B
Plaintext
USB OHCI controllers
|
|
|
|
Required properties:
|
|
- compatible : "generic-ohci"
|
|
- reg : ohci controller register range (address and length)
|
|
- interrupts : ohci controller interrupt
|
|
|
|
Optional properties:
|
|
- big-endian-regs : boolean, set this for hcds with big-endian registers
|
|
- big-endian-desc : boolean, set this for hcds with big-endian descriptors
|
|
- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
|
|
- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
|
|
- remote-wakeup-connected: remote wakeup is wired on the platform
|
|
- num-ports : u32, to override the detected port count
|
|
- clocks : a list of phandle + clock specifier pairs
|
|
- phys : phandle + phy specifier pair
|
|
- phy-names : "usb"
|
|
- resets : a list of phandle + reset specifier pairs
|
|
|
|
Example:
|
|
|
|
ohci0: usb@1c14400 {
|
|
compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
|
|
reg = <0x01c14400 0x100>;
|
|
interrupts = <64>;
|
|
clocks = <&usb_clk 6>, <&ahb_gates 2>;
|
|
phys = <&usbphy 1>;
|
|
phy-names = "usb";
|
|
};
|