mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
5ed34d3a43
UniPhier SoCs contain AIDET (ARM Interrupt Detector). This is intended to provide additional features that are not covered by GIC. The main purpose is to provide logic inverter to support low level and falling edge trigger types for interrupt lines from on-board devices. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
33 lines
1.3 KiB
Plaintext
33 lines
1.3 KiB
Plaintext
UniPhier AIDET
|
|
|
|
UniPhier AIDET (ARM Interrupt Detector) is an add-on block for ARM GIC (Generic
|
|
Interrupt Controller). GIC itself can handle only high level and rising edge
|
|
interrupts. The AIDET provides logic inverter to support low level and falling
|
|
edge interrupts.
|
|
|
|
Required properties:
|
|
- compatible: Should be one of the following:
|
|
"socionext,uniphier-ld4-aidet" - for LD4 SoC
|
|
"socionext,uniphier-pro4-aidet" - for Pro4 SoC
|
|
"socionext,uniphier-sld8-aidet" - for sLD8 SoC
|
|
"socionext,uniphier-pro5-aidet" - for Pro5 SoC
|
|
"socionext,uniphier-pxs2-aidet" - for PXs2/LD6b SoC
|
|
"socionext,uniphier-ld11-aidet" - for LD11 SoC
|
|
"socionext,uniphier-ld20-aidet" - for LD20 SoC
|
|
"socionext,uniphier-pxs3-aidet" - for PXs3 SoC
|
|
- reg: Specifies offset and length of the register set for the device.
|
|
- interrupt-controller: Identifies the node as an interrupt controller
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an interrupt
|
|
source. The value should be 2. The first cell defines the interrupt number
|
|
(corresponds to the SPI interrupt number of GIC). The second cell specifies
|
|
the trigger type as defined in interrupts.txt in this directory.
|
|
|
|
Example:
|
|
|
|
aidet: aidet@5fc20000 {
|
|
compatible = "socionext,uniphier-pro4-aidet";
|
|
reg = <0x5fc20000 0x200>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|