mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
9dbd90f17e
This patch adds an irqchip driver for the main interrupt controller found on Marvell Orion SoCs (Kirkwood, Dove, Orion5x, Discovery Innovation). Corresponding device tree documentation is also added. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: John Stultz <john.stultz@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1370536034-23956-2-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
49 lines
1.6 KiB
Plaintext
49 lines
1.6 KiB
Plaintext
Marvell Orion SoC interrupt controllers
|
|
|
|
* Main interrupt controller
|
|
|
|
Required properties:
|
|
- compatible: shall be "marvell,orion-intc"
|
|
- reg: base address(es) of interrupt registers starting with CAUSE register
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
|
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
|
|
|
|
The interrupt sources map to the corresponding bits in the interrupt
|
|
registers, i.e.
|
|
- 0 maps to bit 0 of first base address,
|
|
- 1 maps to bit 1 of first base address,
|
|
- 32 maps to bit 0 of second base address, and so on.
|
|
|
|
Example:
|
|
intc: interrupt-controller {
|
|
compatible = "marvell,orion-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
/* Dove has 64 first level interrupts */
|
|
reg = <0x20200 0x10>, <0x20210 0x10>;
|
|
};
|
|
|
|
* Bridge interrupt controller
|
|
|
|
Required properties:
|
|
- compatible: shall be "marvell,orion-bridge-intc"
|
|
- reg: base address of bridge interrupt registers starting with CAUSE register
|
|
- interrupts: bridge interrupt of the main interrupt controller
|
|
- interrupt-controller: identifies the node as an interrupt controller
|
|
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
|
|
|
|
Optional properties:
|
|
- marvell,#interrupts: number of interrupts provided by bridge interrupt
|
|
controller, defaults to 32 if not set
|
|
|
|
Example:
|
|
bridge_intc: interrupt-controller {
|
|
compatible = "marvell,orion-bridge-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x20110 0x8>;
|
|
interrupts = <0>;
|
|
/* Dove bridge provides 5 interrupts */
|
|
marvell,#interrupts = <5>;
|
|
};
|