mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-11-27 03:55:37 +08:00
6f5e285839
Add compatible and use DID to check rt5733. The only difference bwtween rt5733 and rt5739 is the output range and voltage step. These two chips can be distinguished from the DIE id. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1688048996-25606-3-git-send-email-cy_huang@richtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
314 lines
8.0 KiB
C
314 lines
8.0 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Device driver for RT5739 regulator
|
|
*
|
|
* Copyright (C) 2023 Richtek Technology Corp.
|
|
*
|
|
* Author: ChiYuan Huang <cy_huang@richtek.com>
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define RT5739_AUTO_MODE 0
|
|
#define RT5739_FPWM_MODE 1
|
|
|
|
#define RT5739_REG_NSEL0 0x00
|
|
#define RT5739_REG_NSEL1 0x01
|
|
#define RT5739_REG_CNTL1 0x02
|
|
#define RT5739_REG_ID1 0x03
|
|
#define RT5739_REG_CNTL2 0x06
|
|
#define RT5739_REG_CNTL4 0x08
|
|
|
|
#define RT5739_VSEL_MASK GENMASK(7, 0)
|
|
#define RT5739_MODEVSEL1_MASK BIT(1)
|
|
#define RT5739_MODEVSEL0_MASK BIT(0)
|
|
#define RT5739_VID_MASK GENMASK(7, 5)
|
|
#define RT5739_DID_MASK GENMASK(3, 0)
|
|
#define RT5739_ACTD_MASK BIT(7)
|
|
#define RT5739_ENVSEL1_MASK BIT(1)
|
|
#define RT5739_ENVSEL0_MASK BIT(0)
|
|
|
|
#define RT5733_CHIPDIE_ID 0x1
|
|
#define RT5733_VOLT_MINUV 270000
|
|
#define RT5733_VOLT_MAXUV 1401250
|
|
#define RT5733_VOLT_STPUV 6250
|
|
#define RT5733_N_VOLTS 182
|
|
|
|
#define RT5739_VOLT_MINUV 300000
|
|
#define RT5739_VOLT_MAXUV 1300000
|
|
#define RT5739_VOLT_STPUV 5000
|
|
#define RT5739_N_VOLTS 201
|
|
#define RT5739_I2CRDY_TIMEUS 1000
|
|
|
|
static int rt5739_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int mask, val;
|
|
|
|
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
|
mask = RT5739_MODEVSEL0_MASK;
|
|
else
|
|
mask = RT5739_MODEVSEL1_MASK;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
val = mask;
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(regmap, RT5739_REG_CNTL1, mask, val);
|
|
}
|
|
|
|
static unsigned int rt5739_get_mode(struct regulator_dev *rdev)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int mask, val;
|
|
int ret;
|
|
|
|
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
|
mask = RT5739_MODEVSEL0_MASK;
|
|
else
|
|
mask = RT5739_MODEVSEL1_MASK;
|
|
|
|
ret = regmap_read(regmap, RT5739_REG_CNTL1, &val);
|
|
if (ret)
|
|
return REGULATOR_MODE_INVALID;
|
|
|
|
if (val & mask)
|
|
return REGULATOR_MODE_FAST;
|
|
|
|
return REGULATOR_MODE_NORMAL;
|
|
}
|
|
|
|
static int rt5739_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int reg, vsel;
|
|
int max_uV;
|
|
|
|
max_uV = desc->min_uV + desc->uV_step * (desc->n_voltages - 1);
|
|
|
|
if (uV < desc->min_uV || uV > max_uV)
|
|
return -EINVAL;
|
|
|
|
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
|
reg = RT5739_REG_NSEL1;
|
|
else
|
|
reg = RT5739_REG_NSEL0;
|
|
|
|
vsel = (uV - desc->min_uV) / desc->uV_step;
|
|
return regmap_write(regmap, reg, vsel);
|
|
}
|
|
|
|
static int rt5739_set_suspend_enable(struct regulator_dev *rdev)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int mask;
|
|
|
|
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
|
mask = RT5739_ENVSEL1_MASK;
|
|
else
|
|
mask = RT5739_ENVSEL0_MASK;
|
|
|
|
return regmap_update_bits(regmap, desc->enable_reg, mask, mask);
|
|
}
|
|
|
|
static int rt5739_set_suspend_disable(struct regulator_dev *rdev)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int mask;
|
|
|
|
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
|
mask = RT5739_ENVSEL1_MASK;
|
|
else
|
|
mask = RT5739_ENVSEL0_MASK;
|
|
|
|
return regmap_update_bits(regmap, desc->enable_reg, mask, 0);
|
|
}
|
|
|
|
static int rt5739_set_suspend_mode(struct regulator_dev *rdev,
|
|
unsigned int mode)
|
|
{
|
|
const struct regulator_desc *desc = rdev->desc;
|
|
struct regmap *regmap = rdev_get_regmap(rdev);
|
|
unsigned int mask, val;
|
|
|
|
if (desc->vsel_reg == RT5739_REG_NSEL0)
|
|
mask = RT5739_MODEVSEL1_MASK;
|
|
else
|
|
mask = RT5739_MODEVSEL0_MASK;
|
|
|
|
switch (mode) {
|
|
case REGULATOR_MODE_FAST:
|
|
val = mask;
|
|
break;
|
|
case REGULATOR_MODE_NORMAL:
|
|
val = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return regmap_update_bits(regmap, RT5739_REG_CNTL1, mask, val);
|
|
}
|
|
|
|
static const struct regulator_ops rt5739_regulator_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_active_discharge = regulator_set_active_discharge_regmap,
|
|
.set_mode = rt5739_set_mode,
|
|
.get_mode = rt5739_get_mode,
|
|
.set_suspend_voltage = rt5739_set_suspend_voltage,
|
|
.set_suspend_enable = rt5739_set_suspend_enable,
|
|
.set_suspend_disable = rt5739_set_suspend_disable,
|
|
.set_suspend_mode = rt5739_set_suspend_mode,
|
|
};
|
|
|
|
static unsigned int rt5739_of_map_mode(unsigned int mode)
|
|
{
|
|
switch (mode) {
|
|
case RT5739_AUTO_MODE:
|
|
return REGULATOR_MODE_NORMAL;
|
|
case RT5739_FPWM_MODE:
|
|
return REGULATOR_MODE_FAST;
|
|
default:
|
|
return REGULATOR_MODE_INVALID;
|
|
}
|
|
}
|
|
|
|
static void rt5739_init_regulator_desc(struct regulator_desc *desc,
|
|
bool vsel_active_high, u8 did)
|
|
{
|
|
/* Fixed */
|
|
desc->name = "rt5739-regulator";
|
|
desc->owner = THIS_MODULE;
|
|
desc->ops = &rt5739_regulator_ops;
|
|
desc->vsel_mask = RT5739_VSEL_MASK;
|
|
desc->enable_reg = RT5739_REG_CNTL2;
|
|
desc->active_discharge_reg = RT5739_REG_CNTL1;
|
|
desc->active_discharge_mask = RT5739_ACTD_MASK;
|
|
desc->active_discharge_on = RT5739_ACTD_MASK;
|
|
desc->of_map_mode = rt5739_of_map_mode;
|
|
|
|
/* Assigned by vsel level */
|
|
if (vsel_active_high) {
|
|
desc->vsel_reg = RT5739_REG_NSEL1;
|
|
desc->enable_mask = RT5739_ENVSEL1_MASK;
|
|
} else {
|
|
desc->vsel_reg = RT5739_REG_NSEL0;
|
|
desc->enable_mask = RT5739_ENVSEL0_MASK;
|
|
}
|
|
|
|
/* Assigned by CHIPDIE ID */
|
|
switch (did) {
|
|
case RT5733_CHIPDIE_ID:
|
|
desc->n_voltages = RT5733_N_VOLTS;
|
|
desc->min_uV = RT5733_VOLT_MINUV;
|
|
desc->uV_step = RT5733_VOLT_STPUV;
|
|
break;
|
|
default:
|
|
desc->n_voltages = RT5739_N_VOLTS;
|
|
desc->min_uV = RT5739_VOLT_MINUV;
|
|
desc->uV_step = RT5739_VOLT_STPUV;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config rt5739_regmap_config = {
|
|
.name = "rt5739",
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = RT5739_REG_CNTL4,
|
|
};
|
|
|
|
static int rt5739_probe(struct i2c_client *i2c)
|
|
{
|
|
struct device *dev = &i2c->dev;
|
|
struct regulator_desc *desc;
|
|
struct regmap *regmap;
|
|
struct gpio_desc *enable_gpio;
|
|
struct regulator_config cfg = {};
|
|
struct regulator_dev *rdev;
|
|
bool vsel_acth;
|
|
unsigned int vid;
|
|
int ret;
|
|
|
|
desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
|
|
if (!desc)
|
|
return -ENOMEM;
|
|
|
|
enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(enable_gpio))
|
|
return dev_err_probe(dev, PTR_ERR(enable_gpio), "Failed to get 'enable' gpio\n");
|
|
else if (enable_gpio)
|
|
usleep_range(RT5739_I2CRDY_TIMEUS, RT5739_I2CRDY_TIMEUS + 1000);
|
|
|
|
regmap = devm_regmap_init_i2c(i2c, &rt5739_regmap_config);
|
|
if (IS_ERR(regmap))
|
|
return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n");
|
|
|
|
ret = regmap_read(regmap, RT5739_REG_ID1, &vid);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret, "Failed to read VID\n");
|
|
|
|
/* RT5739: (VID & MASK) must be 0 */
|
|
if (vid & RT5739_VID_MASK)
|
|
return dev_err_probe(dev, -ENODEV, "Incorrect VID (0x%02x)\n", vid);
|
|
|
|
vsel_acth = device_property_read_bool(dev, "richtek,vsel-active-high");
|
|
|
|
rt5739_init_regulator_desc(desc, vsel_acth, vid & RT5739_DID_MASK);
|
|
|
|
cfg.dev = dev;
|
|
cfg.of_node = dev_of_node(dev);
|
|
cfg.init_data = of_get_regulator_init_data(dev, dev_of_node(dev), desc);
|
|
rdev = devm_regulator_register(dev, desc, &cfg);
|
|
if (IS_ERR(rdev))
|
|
return dev_err_probe(dev, PTR_ERR(rdev), "Failed to register regulator\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id rt5739_device_table[] = {
|
|
{ .compatible = "richtek,rt5733" },
|
|
{ .compatible = "richtek,rt5739" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rt5739_device_table);
|
|
|
|
static struct i2c_driver rt5739_driver = {
|
|
.driver = {
|
|
.name = "rt5739",
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
|
.of_match_table = rt5739_device_table,
|
|
},
|
|
.probe = rt5739_probe,
|
|
};
|
|
module_i2c_driver(rt5739_driver);
|
|
|
|
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
|
MODULE_DESCRIPTION("Richtek RT5739 regulator driver");
|
|
MODULE_LICENSE("GPL");
|