/* * Streamzap Remote Control driver * * Copyright (c) 2005 Christoph Bartelmus * Copyright (c) 2010 Jarod Wilson * * This driver was based on the work of Greg Wickham and Adrian * Dewhurst. It was substantially rewritten to support correct signal * gaps and now maintains a delay buffer, which is used to present * consistent timing behaviour to user space applications. Without the * delay buffer an ugly hack would be required in lircd, which can * cause sluggish signal decoding in certain situations. * * Ported to in-kernel ir-core interface by Jarod Wilson * * This driver is based on the USB skeleton driver packaged with the * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include #define DRIVER_VERSION "1.61" #define DRIVER_NAME "streamzap" #define DRIVER_DESC "Streamzap Remote Control driver" #ifdef CONFIG_USB_DEBUG static int debug = 1; #else static int debug; #endif #define USB_STREAMZAP_VENDOR_ID 0x0e9c #define USB_STREAMZAP_PRODUCT_ID 0x0000 /* table of devices that work with this driver */ static struct usb_device_id streamzap_table[] = { /* Streamzap Remote Control */ { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) }, /* Terminating entry */ { } }; MODULE_DEVICE_TABLE(usb, streamzap_table); #define SZ_PULSE_MASK 0xf0 #define SZ_SPACE_MASK 0x0f #define SZ_TIMEOUT 0xff #define SZ_RESOLUTION 256 /* number of samples buffered */ #define SZ_BUF_LEN 128 /* from ir-rc5-sz-decoder.c */ #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE #define load_rc5_sz_decode() request_module("ir-rc5-sz-decoder") #else #define load_rc5_sz_decode() 0 #endif enum StreamzapDecoderState { PulseSpace, FullPulse, FullSpace, IgnorePulse }; /* structure to hold our device specific stuff */ struct streamzap_ir { /* ir-core */ struct rc_dev *rdev; /* core device info */ struct device *dev; /* usb */ struct usb_device *usbdev; struct usb_interface *interface; struct usb_endpoint_descriptor *endpoint; struct urb *urb_in; /* buffer & dma */ unsigned char *buf_in; dma_addr_t dma_in; unsigned int buf_in_len; /* track what state we're in */ enum StreamzapDecoderState decoder_state; /* tracks whether we are currently receiving some signal */ bool idle; /* sum of signal lengths received since signal start */ unsigned long sum; /* start time of signal; necessary for gap tracking */ struct timeval signal_last; struct timeval signal_start; bool timeout_enabled; char name[128]; char phys[64]; }; /* local function prototypes */ static int streamzap_probe(struct usb_interface *interface, const struct usb_device_id *id); static void streamzap_disconnect(struct usb_interface *interface); static void streamzap_callback(struct urb *urb); static int streamzap_suspend(struct usb_interface *intf, pm_message_t message); static int streamzap_resume(struct usb_interface *intf); /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver streamzap_driver = { .name = DRIVER_NAME, .probe = streamzap_probe, .disconnect = streamzap_disconnect, .suspend = streamzap_suspend, .resume = streamzap_resume, .id_table = streamzap_table, }; static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir) { dev_dbg(sz->dev, "Storing %s with duration %u us\n", (rawir.pulse ? "pulse" : "space"), rawir.duration); ir_raw_event_store_with_filter(sz->rdev, &rawir); } static void sz_push_full_pulse(struct streamzap_ir *sz, unsigned char value) { DEFINE_IR_RAW_EVENT(rawir); if (sz->idle) { long deltv; sz->signal_last = sz->signal_start; do_gettimeofday(&sz->signal_start); deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec; rawir.pulse = false; if (deltv > 15) { /* really long time */ rawir.duration = IR_MAX_DURATION; } else { rawir.duration = (int)(deltv * 1000000 + sz->signal_start.tv_usec - sz->signal_last.tv_usec); rawir.duration -= sz->sum; rawir.duration *= 1000; rawir.duration &= IR_MAX_DURATION; } sz_push(sz, rawir); sz->idle = false; sz->sum = 0; } rawir.pulse = true; rawir.duration = ((int) value) * SZ_RESOLUTION; rawir.duration += SZ_RESOLUTION / 2; sz->sum += rawir.duration; rawir.duration *= 1000; rawir.duration &= IR_MAX_DURATION; sz_push(sz, rawir); } static void sz_push_half_pulse(struct streamzap_ir *sz, unsigned char value) { sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4); } static void sz_push_full_space(struct streamzap_ir *sz, unsigned char value) { DEFINE_IR_RAW_EVENT(rawir); rawir.pulse = false; rawir.duration = ((int) value) * SZ_RESOLUTION; rawir.duration += SZ_RESOLUTION / 2; sz->sum += rawir.duration; rawir.duration *= 1000; sz_push(sz, rawir); } static void sz_push_half_space(struct streamzap_ir *sz, unsigned long value) { sz_push_full_space(sz, value & SZ_SPACE_MASK); } /** * streamzap_callback - usb IRQ handler callback * * This procedure is invoked on reception of data from * the usb remote. */ static void streamzap_callback(struct urb *urb) { struct streamzap_ir *sz; unsigned int i; int len; if (!urb) return; sz = urb->context; len = urb->actual_length; switch (urb->status) { case -ECONNRESET: case -ENOENT: case -ESHUTDOWN: /* * this urb is terminated, clean up. * sz might already be invalid at this point */ dev_err(sz->dev, "urb terminated, status: %d\n", urb->status); return; default: break; } dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len); for (i = 0; i < len; i++) { dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n", i, (unsigned char)sz->buf_in[i]); switch (sz->decoder_state) { case PulseSpace: if ((sz->buf_in[i] & SZ_PULSE_MASK) == SZ_PULSE_MASK) { sz->decoder_state = FullPulse; continue; } else if ((sz->buf_in[i] & SZ_SPACE_MASK) == SZ_SPACE_MASK) { sz_push_half_pulse(sz, sz->buf_in[i]); sz->decoder_state = FullSpace; continue; } else { sz_push_half_pulse(sz, sz->buf_in[i]); sz_push_half_space(sz, sz->buf_in[i]); } break; case FullPulse: sz_push_full_pulse(sz, sz->buf_in[i]); sz->decoder_state = IgnorePulse; break; case FullSpace: if (sz->buf_in[i] == SZ_TIMEOUT) { DEFINE_IR_RAW_EVENT(rawir); rawir.pulse = false; rawir.duration = sz->rdev->timeout; sz->idle = true; if (sz->timeout_enabled) sz_push(sz, rawir); ir_raw_event_handle(sz->rdev); } else { sz_push_full_space(sz, sz->buf_in[i]); } sz->decoder_state = PulseSpace; break; case IgnorePulse: if ((sz->buf_in[i] & SZ_SPACE_MASK) == SZ_SPACE_MASK) { sz->decoder_state = FullSpace; continue; } sz_push_half_space(sz, sz->buf_in[i]); sz->decoder_state = PulseSpace; break; } } usb_submit_urb(urb, GFP_ATOMIC); return; } static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz) { struct rc_dev *rdev; struct device *dev = sz->dev; int ret; rdev = rc_allocate_device(); if (!rdev) { dev_err(dev, "remote dev allocation failed\n"); goto out; } snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared " "Receiver (%04x:%04x)", le16_to_cpu(sz->usbdev->descriptor.idVendor), le16_to_cpu(sz->usbdev->descriptor.idProduct)); usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys)); strlcat(sz->phys, "/input0", sizeof(sz->phys)); rdev->input_name = sz->name; rdev->input_phys = sz->phys; rdev->priv = sz; rdev->driver_type = RC_DRIVER_IR_RAW; rdev->allowed_protos = RC_TYPE_ALL; rdev->driver_name = DRIVER_NAME; rdev->map_name = RC_MAP_STREAMZAP; ret = rc_register_device(rdev); if (ret < 0) { dev_err(dev, "remote input device register failed\n"); goto out; } return rdev; out: rc_free_device(rdev); return NULL; } /** * streamzap_probe * * Called by usb-core to associated with a candidate device * On any failure the return value is the ERROR * On success return 0 */ static int __devinit streamzap_probe(struct usb_interface *intf, const struct usb_device_id *id) { struct usb_device *usbdev = interface_to_usbdev(intf); struct usb_host_interface *iface_host; struct streamzap_ir *sz = NULL; char buf[63], name[128] = ""; int retval = -ENOMEM; int pipe, maxp; /* Allocate space for device driver specific data */ sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL); if (!sz) return -ENOMEM; sz->usbdev = usbdev; sz->interface = intf; /* Check to ensure endpoint information matches requirements */ iface_host = intf->cur_altsetting; if (iface_host->desc.bNumEndpoints != 1) { dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n", __func__, iface_host->desc.bNumEndpoints); retval = -ENODEV; goto free_sz; } sz->endpoint = &(iface_host->endpoint[0].desc); if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) != USB_DIR_IN) { dev_err(&intf->dev, "%s: endpoint doesn't match input device " "02%02x\n", __func__, sz->endpoint->bEndpointAddress); retval = -ENODEV; goto free_sz; } if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT) { dev_err(&intf->dev, "%s: endpoint attributes don't match xfer " "02%02x\n", __func__, sz->endpoint->bmAttributes); retval = -ENODEV; goto free_sz; } pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress); maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe)); if (maxp == 0) { dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n", __func__); retval = -ENODEV; goto free_sz; } /* Allocate the USB buffer and IRQ URB */ sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in); if (!sz->buf_in) goto free_sz; sz->urb_in = usb_alloc_urb(0, GFP_KERNEL); if (!sz->urb_in) goto free_buf_in; sz->dev = &intf->dev; sz->buf_in_len = maxp; if (usbdev->descriptor.iManufacturer && usb_string(usbdev, usbdev->descriptor.iManufacturer, buf, sizeof(buf)) > 0) strlcpy(name, buf, sizeof(name)); if (usbdev->descriptor.iProduct && usb_string(usbdev, usbdev->descriptor.iProduct, buf, sizeof(buf)) > 0) snprintf(name + strlen(name), sizeof(name) - strlen(name), " %s", buf); sz->rdev = streamzap_init_rc_dev(sz); if (!sz->rdev) goto rc_dev_fail; sz->idle = true; sz->decoder_state = PulseSpace; /* FIXME: don't yet have a way to set this */ sz->timeout_enabled = true; sz->rdev->timeout = (((SZ_TIMEOUT * SZ_RESOLUTION * 1000) & IR_MAX_DURATION) | 0x03000000); #if 0 /* not yet supported, depends on patches from maxim */ /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */ sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000; sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION * 1000; #endif do_gettimeofday(&sz->signal_start); /* Complete final initialisations */ usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in, maxp, (usb_complete_t)streamzap_callback, sz, sz->endpoint->bInterval); sz->urb_in->transfer_dma = sz->dma_in; sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; usb_set_intfdata(intf, sz); if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) dev_err(sz->dev, "urb submit failed\n"); dev_info(sz->dev, "Registered %s on usb%d:%d\n", name, usbdev->bus->busnum, usbdev->devnum); /* Load the streamzap not-quite-rc5 decoder too */ load_rc5_sz_decode(); return 0; rc_dev_fail: usb_free_urb(sz->urb_in); free_buf_in: usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in); free_sz: kfree(sz); return retval; } /** * streamzap_disconnect * * Called by the usb core when the device is removed from the system. * * This routine guarantees that the driver will not submit any more urbs * by clearing dev->usbdev. It is also supposed to terminate any currently * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(), * does not provide any way to do this. */ static void streamzap_disconnect(struct usb_interface *interface) { struct streamzap_ir *sz = usb_get_intfdata(interface); struct usb_device *usbdev = interface_to_usbdev(interface); usb_set_intfdata(interface, NULL); if (!sz) return; sz->usbdev = NULL; rc_unregister_device(sz->rdev); usb_kill_urb(sz->urb_in); usb_free_urb(sz->urb_in); usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in); kfree(sz); } static int streamzap_suspend(struct usb_interface *intf, pm_message_t message) { struct streamzap_ir *sz = usb_get_intfdata(intf); usb_kill_urb(sz->urb_in); return 0; } static int streamzap_resume(struct usb_interface *intf) { struct streamzap_ir *sz = usb_get_intfdata(intf); if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) { dev_err(sz->dev, "Error sumbiting urb\n"); return -EIO; } return 0; } /** * streamzap_init */ static int __init streamzap_init(void) { int ret; /* register this driver with the USB subsystem */ ret = usb_register(&streamzap_driver); if (ret < 0) printk(KERN_ERR DRIVER_NAME ": usb register failed, " "result = %d\n", ret); return ret; } /** * streamzap_exit */ static void __exit streamzap_exit(void) { usb_deregister(&streamzap_driver); } module_init(streamzap_init); module_exit(streamzap_exit); MODULE_AUTHOR("Jarod Wilson "); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Enable debugging messages");