#ifndef SOUND_FIREWIRE_AMDTP_H_INCLUDED #define SOUND_FIREWIRE_AMDTP_H_INCLUDED #include #include #include #include #include #include "packets-buffer.h" /** * enum cip_flags - describes details of the streaming protocol * @CIP_NONBLOCKING: In non-blocking mode, each packet contains * sample_rate/8000 samples, with rounding up or down to adjust * for clock skew and left-over fractional samples. This should * be used if supported by the device. * @CIP_BLOCKING: In blocking mode, each packet contains either zero or * SYT_INTERVAL samples, with these two types alternating so that * the overall sample rate comes out right. * @CIP_EMPTY_WITH_TAG0: Only for in-stream. Empty in-packets have TAG0. * @CIP_DBC_IS_END_EVENT: Only for in-stream. The value of dbc in an in-packet * corresponds to the end of event in the packet. Out of IEC 61883. * @CIP_WRONG_DBS: Only for in-stream. The value of dbs is wrong in in-packets. * The value of data_block_quadlets is used instead of reported value. * @CIP_SKIP_DBC_ZERO_CHECK: Only for in-stream. Packets with zero in dbc is * skipped for detecting discontinuity. * @CIP_EMPTY_HAS_WRONG_DBC: Only for in-stream. The value of dbc in empty * packet is wrong but the others are correct. * @CIP_JUMBO_PAYLOAD: Only for in-stream. The number of data blocks in an * packet is larger than IEC 61883-6 defines. Current implementation * allows 5 times as large as IEC 61883-6 defines. */ enum cip_flags { CIP_NONBLOCKING = 0x00, CIP_BLOCKING = 0x01, CIP_EMPTY_WITH_TAG0 = 0x02, CIP_DBC_IS_END_EVENT = 0x04, CIP_WRONG_DBS = 0x08, CIP_SKIP_DBC_ZERO_CHECK = 0x10, CIP_EMPTY_HAS_WRONG_DBC = 0x20, CIP_JUMBO_PAYLOAD = 0x40, }; /** * enum cip_sfc - supported Sampling Frequency Codes (SFCs) * @CIP_SFC_32000: 32,000 data blocks * @CIP_SFC_44100: 44,100 data blocks * @CIP_SFC_48000: 48,000 data blocks * @CIP_SFC_88200: 88,200 data blocks * @CIP_SFC_96000: 96,000 data blocks * @CIP_SFC_176400: 176,400 data blocks * @CIP_SFC_192000: 192,000 data blocks * @CIP_SFC_COUNT: the number of supported SFCs * * These values are used to show nominal Sampling Frequency Code in * Format Dependent Field (FDF) of AMDTP packet header. In IEC 61883-6:2002, * this code means the number of events per second. Actually the code * represents the number of data blocks transferred per second in an AMDTP * stream. * * In IEC 61883-6:2005, some extensions were added to support more types of * data such as 'One Bit LInear Audio', therefore the meaning of SFC became * different depending on the types. * * Currently our implementation is compatible with IEC 61883-6:2002. */ enum cip_sfc { CIP_SFC_32000 = 0, CIP_SFC_44100 = 1, CIP_SFC_48000 = 2, CIP_SFC_88200 = 3, CIP_SFC_96000 = 4, CIP_SFC_176400 = 5, CIP_SFC_192000 = 6, CIP_SFC_COUNT }; struct fw_unit; struct fw_iso_context; struct snd_pcm_substream; struct snd_pcm_runtime; enum amdtp_stream_direction { AMDTP_OUT_STREAM = 0, AMDTP_IN_STREAM }; struct amdtp_stream; typedef unsigned int (*amdtp_stream_process_data_blocks_t)( struct amdtp_stream *s, __be32 *buffer, unsigned int data_blocks, unsigned int *syt); struct amdtp_stream { struct fw_unit *unit; enum cip_flags flags; enum amdtp_stream_direction direction; struct mutex mutex; /* For packet processing. */ struct fw_iso_context *context; struct iso_packets_buffer buffer; int packet_index; /* For CIP headers. */ unsigned int source_node_id_field; unsigned int data_block_quadlets; unsigned int data_block_counter; unsigned int sph; unsigned int fmt; unsigned int fdf; /* quirk: fixed interval of dbc between previos/current packets. */ unsigned int tx_dbc_interval; /* quirk: indicate the value of dbc field in a first packet. */ unsigned int tx_first_dbc; /* Internal flags. */ enum cip_sfc sfc; unsigned int syt_interval; unsigned int transfer_delay; unsigned int data_block_state; unsigned int last_syt_offset; unsigned int syt_offset_state; /* For a PCM substream processing. */ struct snd_pcm_substream *pcm; struct tasklet_struct period_tasklet; unsigned int pcm_buffer_pointer; unsigned int pcm_period_pointer; /* To wait for first packet. */ bool callbacked; wait_queue_head_t callback_wait; u32 start_cycle; /* For backends to process data blocks. */ void *protocol; amdtp_stream_process_data_blocks_t process_data_blocks; }; int amdtp_stream_init(struct amdtp_stream *s, struct fw_unit *unit, enum amdtp_stream_direction dir, enum cip_flags flags, unsigned int fmt, amdtp_stream_process_data_blocks_t process_data_blocks, unsigned int protocol_size); void amdtp_stream_destroy(struct amdtp_stream *s); int amdtp_stream_set_parameters(struct amdtp_stream *s, unsigned int rate, unsigned int data_block_quadlets); unsigned int amdtp_stream_get_max_payload(struct amdtp_stream *s); int amdtp_stream_start(struct amdtp_stream *s, int channel, int speed); void amdtp_stream_update(struct amdtp_stream *s); void amdtp_stream_stop(struct amdtp_stream *s); int amdtp_stream_add_pcm_hw_constraints(struct amdtp_stream *s, struct snd_pcm_runtime *runtime); void amdtp_stream_pcm_prepare(struct amdtp_stream *s); unsigned long amdtp_stream_pcm_pointer(struct amdtp_stream *s); void amdtp_stream_pcm_abort(struct amdtp_stream *s); extern const unsigned int amdtp_syt_intervals[CIP_SFC_COUNT]; extern const unsigned int amdtp_rate_table[CIP_SFC_COUNT]; /** * amdtp_stream_running - check stream is running or not * @s: the AMDTP stream * * If this function returns true, the stream is running. */ static inline bool amdtp_stream_running(struct amdtp_stream *s) { return !IS_ERR(s->context); } /** * amdtp_streaming_error - check for streaming error * @s: the AMDTP stream * * If this function returns true, the stream's packet queue has stopped due to * an asynchronous error. */ static inline bool amdtp_streaming_error(struct amdtp_stream *s) { return s->packet_index < 0; } /** * amdtp_stream_pcm_running - check PCM substream is running or not * @s: the AMDTP stream * * If this function returns true, PCM substream in the AMDTP stream is running. */ static inline bool amdtp_stream_pcm_running(struct amdtp_stream *s) { return !!s->pcm; } /** * amdtp_stream_pcm_trigger - start/stop playback from a PCM device * @s: the AMDTP stream * @pcm: the PCM device to be started, or %NULL to stop the current device * * Call this function on a running isochronous stream to enable the actual * transmission of PCM data. This function should be called from the PCM * device's .trigger callback. */ static inline void amdtp_stream_pcm_trigger(struct amdtp_stream *s, struct snd_pcm_substream *pcm) { ACCESS_ONCE(s->pcm) = pcm; } static inline bool cip_sfc_is_base_44100(enum cip_sfc sfc) { return sfc & 1; } /** * amdtp_stream_wait_callback - sleep till callbacked or timeout * @s: the AMDTP stream * @timeout: msec till timeout * * If this function return false, the AMDTP stream should be stopped. */ static inline bool amdtp_stream_wait_callback(struct amdtp_stream *s, unsigned int timeout) { return wait_event_timeout(s->callback_wait, s->callbacked == true, msecs_to_jiffies(timeout)) > 0; } #endif