/****************************************************************************** * * Module Name: evgpe - General Purpose Event handling and dispatch * *****************************************************************************/ /* * Copyright (C) 2000 - 2014, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * 3. Neither the names of the above-listed copyright holders nor the names * of any contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. */ #include #include "accommon.h" #include "acevents.h" #include "acnamesp.h" #define _COMPONENT ACPI_EVENTS ACPI_MODULE_NAME("evgpe") #if (!ACPI_REDUCED_HARDWARE) /* Entire module */ /* Local prototypes */ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context); static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context); /******************************************************************************* * * FUNCTION: acpi_ev_update_gpe_enable_mask * * PARAMETERS: gpe_event_info - GPE to update * * RETURN: Status * * DESCRIPTION: Updates GPE register enable mask based upon whether there are * runtime references to this GPE * ******************************************************************************/ acpi_status acpi_ev_update_gpe_enable_mask(struct acpi_gpe_event_info *gpe_event_info) { struct acpi_gpe_register_info *gpe_register_info; u32 register_bit; ACPI_FUNCTION_TRACE(ev_update_gpe_enable_mask); gpe_register_info = gpe_event_info->register_info; if (!gpe_register_info) { return_ACPI_STATUS(AE_NOT_EXIST); } register_bit = acpi_hw_get_gpe_register_bit(gpe_event_info); /* Clear the run bit up front */ ACPI_CLEAR_BIT(gpe_register_info->enable_for_run, register_bit); /* Set the mask bit only if there are references to this GPE */ if (gpe_event_info->runtime_count) { ACPI_SET_BIT(gpe_register_info->enable_for_run, (u8)register_bit); } return_ACPI_STATUS(AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ev_enable_gpe * * PARAMETERS: gpe_event_info - GPE to enable * * RETURN: Status * * DESCRIPTION: Clear a GPE of stale events and enable it. * ******************************************************************************/ acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) { acpi_status status; ACPI_FUNCTION_TRACE(ev_enable_gpe); /* Clear the GPE (of stale events) */ status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { return_ACPI_STATUS(status); } /* Enable the requested GPE */ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE_SAVE); return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_add_gpe_reference * * PARAMETERS: gpe_event_info - Add a reference to this GPE * * RETURN: Status * * DESCRIPTION: Add a reference to a GPE. On the first reference, the GPE is * hardware-enabled. * ******************************************************************************/ acpi_status acpi_ev_add_gpe_reference(struct acpi_gpe_event_info *gpe_event_info) { acpi_status status = AE_OK; ACPI_FUNCTION_TRACE(ev_add_gpe_reference); if (gpe_event_info->runtime_count == ACPI_UINT8_MAX) { return_ACPI_STATUS(AE_LIMIT); } gpe_event_info->runtime_count++; if (gpe_event_info->runtime_count == 1) { /* Enable on first reference */ status = acpi_ev_update_gpe_enable_mask(gpe_event_info); if (ACPI_SUCCESS(status)) { status = acpi_ev_enable_gpe(gpe_event_info); } if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count--; } } return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_remove_gpe_reference * * PARAMETERS: gpe_event_info - Remove a reference to this GPE * * RETURN: Status * * DESCRIPTION: Remove a reference to a GPE. When the last reference is * removed, the GPE is hardware-disabled. * ******************************************************************************/ acpi_status acpi_ev_remove_gpe_reference(struct acpi_gpe_event_info *gpe_event_info) { acpi_status status = AE_OK; ACPI_FUNCTION_TRACE(ev_remove_gpe_reference); if (!gpe_event_info->runtime_count) { return_ACPI_STATUS(AE_LIMIT); } gpe_event_info->runtime_count--; if (!gpe_event_info->runtime_count) { /* Disable on last reference */ status = acpi_ev_update_gpe_enable_mask(gpe_event_info); if (ACPI_SUCCESS(status)) { status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE_SAVE); } if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count++; } } return_ACPI_STATUS(status); } /******************************************************************************* * * FUNCTION: acpi_ev_low_get_gpe_info * * PARAMETERS: gpe_number - Raw GPE number * gpe_block - A GPE info block * * RETURN: A GPE event_info struct. NULL if not a valid GPE (The gpe_number * is not within the specified GPE block) * * DESCRIPTION: Returns the event_info struct associated with this GPE. This is * the low-level implementation of ev_get_gpe_event_info. * ******************************************************************************/ struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number, struct acpi_gpe_block_info *gpe_block) { u32 gpe_index; /* * Validate that the gpe_number is within the specified gpe_block. * (Two steps) */ if (!gpe_block || (gpe_number < gpe_block->block_base_number)) { return (NULL); } gpe_index = gpe_number - gpe_block->block_base_number; if (gpe_index >= gpe_block->gpe_count) { return (NULL); } return (&gpe_block->event_info[gpe_index]); } /******************************************************************************* * * FUNCTION: acpi_ev_get_gpe_event_info * * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1 * gpe_number - Raw GPE number * * RETURN: A GPE event_info struct. NULL if not a valid GPE * * DESCRIPTION: Returns the event_info struct associated with this GPE. * Validates the gpe_block and the gpe_number * * Should be called only when the GPE lists are semaphore locked * and not subject to change. * ******************************************************************************/ struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, u32 gpe_number) { union acpi_operand_object *obj_desc; struct acpi_gpe_event_info *gpe_info; u32 i; ACPI_FUNCTION_ENTRY(); /* A NULL gpe_device means use the FADT-defined GPE block(s) */ if (!gpe_device) { /* Examine GPE Block 0 and 1 (These blocks are permanent) */ for (i = 0; i < ACPI_MAX_GPE_BLOCKS; i++) { gpe_info = acpi_ev_low_get_gpe_info(gpe_number, acpi_gbl_gpe_fadt_blocks [i]); if (gpe_info) { return (gpe_info); } } /* The gpe_number was not in the range of either FADT GPE block */ return (NULL); } /* A Non-NULL gpe_device means this is a GPE Block Device */ obj_desc = acpi_ns_get_attached_object((struct acpi_namespace_node *) gpe_device); if (!obj_desc || !obj_desc->device.gpe_block) { return (NULL); } return (acpi_ev_low_get_gpe_info (gpe_number, obj_desc->device.gpe_block)); } /******************************************************************************* * * FUNCTION: acpi_ev_gpe_detect * * PARAMETERS: gpe_xrupt_list - Interrupt block for this interrupt. * Can have multiple GPE blocks attached. * * RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED * * DESCRIPTION: Detect if any GP events have occurred. This function is * executed at interrupt level. * ******************************************************************************/ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list) { acpi_status status; struct acpi_gpe_block_info *gpe_block; struct acpi_namespace_node *gpe_device; struct acpi_gpe_register_info *gpe_register_info; struct acpi_gpe_event_info *gpe_event_info; u32 gpe_number; u32 int_status = ACPI_INTERRUPT_NOT_HANDLED; u8 enabled_status_byte; u32 status_reg; u32 enable_reg; acpi_cpu_flags flags; u32 i; u32 j; ACPI_FUNCTION_NAME(ev_gpe_detect); /* Check for the case where there are no GPEs */ if (!gpe_xrupt_list) { return (int_status); } /* * We need to obtain the GPE lock for both the data structs and registers * Note: Not necessary to obtain the hardware lock, since the GPE * registers are owned by the gpe_lock. */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); /* Examine all GPE blocks attached to this interrupt level */ gpe_block = gpe_xrupt_list->gpe_block_list_head; while (gpe_block) { gpe_device = gpe_block->node; /* * Read all of the 8-bit GPE status and enable registers in this GPE * block, saving all of them. Find all currently active GP events. */ for (i = 0; i < gpe_block->register_count; i++) { /* Get the next status/enable pair */ gpe_register_info = &gpe_block->register_info[i]; /* * Optimization: If there are no GPEs enabled within this * register, we can safely ignore the entire register. */ if (!(gpe_register_info->enable_for_run | gpe_register_info->enable_for_wake)) { ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS, "Ignore disabled registers for GPE %02X-%02X: " "RunEnable=%02X, WakeEnable=%02X\n", gpe_register_info-> base_gpe_number, gpe_register_info-> base_gpe_number + (ACPI_GPE_REGISTER_WIDTH - 1), gpe_register_info-> enable_for_run, gpe_register_info-> enable_for_wake)); continue; } /* Read the Status Register */ status = acpi_hw_read(&status_reg, &gpe_register_info->status_address); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } /* Read the Enable Register */ status = acpi_hw_read(&enable_reg, &gpe_register_info->enable_address); if (ACPI_FAILURE(status)) { goto unlock_and_exit; } ACPI_DEBUG_PRINT((ACPI_DB_INTERRUPTS, "Read registers for GPE %02X-%02X: Status=%02X, Enable=%02X, " "RunEnable=%02X, WakeEnable=%02X\n", gpe_register_info->base_gpe_number, gpe_register_info->base_gpe_number + (ACPI_GPE_REGISTER_WIDTH - 1), status_reg, enable_reg, gpe_register_info->enable_for_run, gpe_register_info->enable_for_wake)); /* Check if there is anything active at all in this register */ enabled_status_byte = (u8)(status_reg & enable_reg); if (!enabled_status_byte) { /* No active GPEs in this register, move on */ continue; } /* Now look at the individual GPEs in this byte register */ for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) { /* Examine one GPE bit */ gpe_event_info = &gpe_block-> event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j]; gpe_number = j + gpe_register_info->base_gpe_number; if (enabled_status_byte & (1 << j)) { /* Invoke global event handler if present */ acpi_gpe_count++; if (acpi_gbl_global_event_handler) { acpi_gbl_global_event_handler (ACPI_EVENT_TYPE_GPE, gpe_device, gpe_number, acpi_gbl_global_event_handler_context); } /* * Found an active GPE. Dispatch the event to a handler * or method. */ int_status |= acpi_ev_gpe_dispatch(gpe_device, gpe_event_info, gpe_number); } } } gpe_block = gpe_block->next; } unlock_and_exit: acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return (int_status); } /******************************************************************************* * * FUNCTION: acpi_ev_asynch_execute_gpe_method * * PARAMETERS: Context (gpe_event_info) - Info for this GPE * * RETURN: None * * DESCRIPTION: Perform the actual execution of a GPE control method. This * function is called from an invocation of acpi_os_execute and * therefore does NOT execute at interrupt level - so that * the control method itself is not executed in the context of * an interrupt handler. * ******************************************************************************/ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) { struct acpi_gpe_event_info *gpe_event_info = context; acpi_status status = AE_OK; struct acpi_evaluate_info *info; struct acpi_gpe_notify_info *notify; ACPI_FUNCTION_TRACE(ev_asynch_execute_gpe_method); /* Do the correct dispatch - normal method or implicit notify */ switch (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags)) { case ACPI_GPE_DISPATCH_NOTIFY: /* * Implicit notify. * Dispatch a DEVICE_WAKE notify to the appropriate handler. * NOTE: the request is queued for execution after this method * completes. The notify handlers are NOT invoked synchronously * from this thread -- because handlers may in turn run other * control methods. * * June 2012: Expand implicit notify mechanism to support * notifies on multiple device objects. */ notify = gpe_event_info->dispatch.notify_list; while (ACPI_SUCCESS(status) && notify) { status = acpi_ev_queue_notify_request(notify->device_node, ACPI_NOTIFY_DEVICE_WAKE); notify = notify->next; } break; case ACPI_GPE_DISPATCH_METHOD: /* Allocate the evaluation information block */ info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info)); if (!info) { status = AE_NO_MEMORY; } else { /* * Invoke the GPE Method (_Lxx, _Exx) i.e., evaluate the * _Lxx/_Exx control method that corresponds to this GPE */ info->prefix_node = gpe_event_info->dispatch.method_node; info->flags = ACPI_IGNORE_RETURN_VALUE; status = acpi_ns_evaluate(info); ACPI_FREE(info); } if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "while evaluating GPE method [%4.4s]", acpi_ut_get_node_name(gpe_event_info-> dispatch. method_node))); } break; default: goto error_exit; /* Should never happen */ } /* Defer enabling of GPE until all notify handlers are done */ status = acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ev_asynch_enable_gpe, gpe_event_info); if (ACPI_SUCCESS(status)) { return_VOID; } error_exit: acpi_ev_asynch_enable_gpe(gpe_event_info); return_VOID; } /******************************************************************************* * * FUNCTION: acpi_ev_asynch_enable_gpe * * PARAMETERS: Context (gpe_event_info) - Info for this GPE * Callback from acpi_os_execute * * RETURN: None * * DESCRIPTION: Asynchronous clear/enable for GPE. This allows the GPE to * complete (i.e., finish execution of Notify) * ******************************************************************************/ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context) { struct acpi_gpe_event_info *gpe_event_info = context; acpi_cpu_flags flags; flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); (void)acpi_ev_finish_gpe(gpe_event_info); acpi_os_release_lock(acpi_gbl_gpe_lock, flags); return; } /******************************************************************************* * * FUNCTION: acpi_ev_finish_gpe * * PARAMETERS: gpe_event_info - Info for this GPE * * RETURN: Status * * DESCRIPTION: Clear/Enable a GPE. Common code that is used after execution * of a GPE method or a synchronous or asynchronous GPE handler. * ******************************************************************************/ acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info * gpe_event_info) { acpi_status status; if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_LEVEL_TRIGGERED) { /* * GPE is level-triggered, we clear the GPE status bit after * handling the event. */ status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { return (status); } } /* * Enable this GPE, conditionally. This means that the GPE will * only be physically enabled if the enable_mask bit is set * in the event_info. */ (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE); return (AE_OK); } /******************************************************************************* * * FUNCTION: acpi_ev_gpe_dispatch * * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1 * gpe_event_info - Info for this GPE * gpe_number - Number relative to the parent GPE block * * RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED * * DESCRIPTION: Dispatch a General Purpose Event to either a function (e.g. EC) * or method (e.g. _Lxx/_Exx) handler. * * This function executes at interrupt level. * ******************************************************************************/ u32 acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device, struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) { acpi_status status; u32 return_value; ACPI_FUNCTION_TRACE(ev_gpe_dispatch); /* * Always disable the GPE so that it does not keep firing before * any asynchronous activity completes (either from the execution * of a GPE method or an asynchronous GPE handler.) * * If there is no handler or method to run, just disable the * GPE and leave it disabled permanently to prevent further such * pointless events from firing. */ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE %02X", gpe_number)); return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); } /* * If edge-triggered, clear the GPE status bit now. Note that * level-triggered events are cleared after the GPE is serviced. */ if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) == ACPI_GPE_EDGE_TRIGGERED) { status = acpi_hw_clear_gpe(gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to clear GPE %02X", gpe_number)); (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE); return_UINT32(ACPI_INTERRUPT_NOT_HANDLED); } } /* * Dispatch the GPE to either an installed handler or the control * method associated with this GPE (_Lxx or _Exx). If a handler * exists, we invoke it and do not attempt to run the method. * If there is neither a handler nor a method, leave the GPE * disabled. */ switch (ACPI_GPE_DISPATCH_TYPE(gpe_event_info->flags)) { case ACPI_GPE_DISPATCH_HANDLER: /* Invoke the installed handler (at interrupt level) */ return_value = gpe_event_info->dispatch.handler->address(gpe_device, gpe_number, gpe_event_info-> dispatch.handler-> context); /* If requested, clear (if level-triggered) and reenable the GPE */ if (return_value & ACPI_REENABLE_GPE) { (void)acpi_ev_finish_gpe(gpe_event_info); } break; case ACPI_GPE_DISPATCH_METHOD: case ACPI_GPE_DISPATCH_NOTIFY: /* * Execute the method associated with the GPE * NOTE: Level-triggered GPEs are cleared after the method completes. */ status = acpi_os_execute(OSL_GPE_HANDLER, acpi_ev_asynch_execute_gpe_method, gpe_event_info); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to queue handler for GPE %02X - event disabled", gpe_number)); } break; default: /* * No handler or method to run! * 03/2010: This case should no longer be possible. We will not allow * a GPE to be enabled if it has no handler or method. */ ACPI_ERROR((AE_INFO, "No handler or method for GPE %02X, disabling event", gpe_number)); break; } return_UINT32(ACPI_INTERRUPT_HANDLED); } #endif /* !ACPI_REDUCED_HARDWARE */