/* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved. * */ #ifndef _MHI_H_ #define _MHI_H_ #include #include #include #include #include #include #include #include struct mhi_chan; struct mhi_event; struct mhi_ctxt; struct mhi_cmd; struct mhi_buf_info; /** * enum mhi_callback - MHI callback * @MHI_CB_IDLE: MHI entered idle state * @MHI_CB_PENDING_DATA: New data available for client to process * @MHI_CB_LPM_ENTER: MHI host entered low power mode * @MHI_CB_LPM_EXIT: MHI host about to exit low power mode * @MHI_CB_EE_RDDM: MHI device entered RDDM exec env * @MHI_CB_EE_MISSION_MODE: MHI device entered Mission Mode exec env * @MHI_CB_SYS_ERROR: MHI device entered error state (may recover) * @MHI_CB_FATAL_ERROR: MHI device entered fatal error state */ enum mhi_callback { MHI_CB_IDLE, MHI_CB_PENDING_DATA, MHI_CB_LPM_ENTER, MHI_CB_LPM_EXIT, MHI_CB_EE_RDDM, MHI_CB_EE_MISSION_MODE, MHI_CB_SYS_ERROR, MHI_CB_FATAL_ERROR, }; /** * enum mhi_flags - Transfer flags * @MHI_EOB: End of buffer for bulk transfer * @MHI_EOT: End of transfer * @MHI_CHAIN: Linked transfer */ enum mhi_flags { MHI_EOB, MHI_EOT, MHI_CHAIN, }; /** * enum mhi_device_type - Device types * @MHI_DEVICE_XFER: Handles data transfer * @MHI_DEVICE_CONTROLLER: Control device */ enum mhi_device_type { MHI_DEVICE_XFER, MHI_DEVICE_CONTROLLER, }; /** * enum mhi_ch_type - Channel types * @MHI_CH_TYPE_INVALID: Invalid channel type * @MHI_CH_TYPE_OUTBOUND: Outbound channel to the device * @MHI_CH_TYPE_INBOUND: Inbound channel from the device * @MHI_CH_TYPE_INBOUND_COALESCED: Coalesced channel for the device to combine * multiple packets and send them as a single * large packet to reduce CPU consumption */ enum mhi_ch_type { MHI_CH_TYPE_INVALID = 0, MHI_CH_TYPE_OUTBOUND = DMA_TO_DEVICE, MHI_CH_TYPE_INBOUND = DMA_FROM_DEVICE, MHI_CH_TYPE_INBOUND_COALESCED = 3, }; /** * struct image_info - Firmware and RDDM table table * @mhi_buf - Buffer for firmware and RDDM table * @entries - # of entries in table */ struct image_info { struct mhi_buf *mhi_buf; struct bhi_vec_entry *bhi_vec; u32 entries; }; /** * enum mhi_ee_type - Execution environment types * @MHI_EE_PBL: Primary Bootloader * @MHI_EE_SBL: Secondary Bootloader * @MHI_EE_AMSS: Modem, aka the primary runtime EE * @MHI_EE_RDDM: Ram dump download mode * @MHI_EE_WFW: WLAN firmware mode * @MHI_EE_PTHRU: Passthrough * @MHI_EE_EDL: Embedded downloader */ enum mhi_ee_type { MHI_EE_PBL, MHI_EE_SBL, MHI_EE_AMSS, MHI_EE_RDDM, MHI_EE_WFW, MHI_EE_PTHRU, MHI_EE_EDL, MHI_EE_MAX_SUPPORTED = MHI_EE_EDL, MHI_EE_DISABLE_TRANSITION, /* local EE, not related to mhi spec */ MHI_EE_NOT_SUPPORTED, MHI_EE_MAX, }; /** * enum mhi_state - MHI states * @MHI_STATE_RESET: Reset state * @MHI_STATE_READY: Ready state * @MHI_STATE_M0: M0 state * @MHI_STATE_M1: M1 state * @MHI_STATE_M2: M2 state * @MHI_STATE_M3: M3 state * @MHI_STATE_M3_FAST: M3 Fast state * @MHI_STATE_BHI: BHI state * @MHI_STATE_SYS_ERR: System Error state */ enum mhi_state { MHI_STATE_RESET = 0x0, MHI_STATE_READY = 0x1, MHI_STATE_M0 = 0x2, MHI_STATE_M1 = 0x3, MHI_STATE_M2 = 0x4, MHI_STATE_M3 = 0x5, MHI_STATE_M3_FAST = 0x6, MHI_STATE_BHI = 0x7, MHI_STATE_SYS_ERR = 0xFF, MHI_STATE_MAX, }; /** * enum mhi_ch_ee_mask - Execution environment mask for channel * @MHI_CH_EE_PBL: Allow channel to be used in PBL EE * @MHI_CH_EE_SBL: Allow channel to be used in SBL EE * @MHI_CH_EE_AMSS: Allow channel to be used in AMSS EE * @MHI_CH_EE_RDDM: Allow channel to be used in RDDM EE * @MHI_CH_EE_PTHRU: Allow channel to be used in PTHRU EE * @MHI_CH_EE_WFW: Allow channel to be used in WFW EE * @MHI_CH_EE_EDL: Allow channel to be used in EDL EE */ enum mhi_ch_ee_mask { MHI_CH_EE_PBL = BIT(MHI_EE_PBL), MHI_CH_EE_SBL = BIT(MHI_EE_SBL), MHI_CH_EE_AMSS = BIT(MHI_EE_AMSS), MHI_CH_EE_RDDM = BIT(MHI_EE_RDDM), MHI_CH_EE_PTHRU = BIT(MHI_EE_PTHRU), MHI_CH_EE_WFW = BIT(MHI_EE_WFW), MHI_CH_EE_EDL = BIT(MHI_EE_EDL), }; /** * enum mhi_er_data_type - Event ring data types * @MHI_ER_DATA: Only client data over this ring * @MHI_ER_CTRL: MHI control data and client data */ enum mhi_er_data_type { MHI_ER_DATA, MHI_ER_CTRL, }; /** * enum mhi_db_brst_mode - Doorbell mode * @MHI_DB_BRST_DISABLE: Burst mode disable * @MHI_DB_BRST_ENABLE: Burst mode enable */ enum mhi_db_brst_mode { MHI_DB_BRST_DISABLE = 0x2, MHI_DB_BRST_ENABLE = 0x3, }; /** * struct mhi_channel_config - Channel configuration structure for controller * @name: The name of this channel * @num: The number assigned to this channel * @num_elements: The number of elements that can be queued to this channel * @local_elements: The local ring length of the channel * @event_ring: The event rung index that services this channel * @dir: Direction that data may flow on this channel * @type: Channel type * @ee_mask: Execution Environment mask for this channel * @pollcfg: Polling configuration for burst mode. 0 is default. milliseconds for UL channels, multiple of 8 ring elements for DL channels * @doorbell: Doorbell mode * @lpm_notify: The channel master requires low power mode notifications * @offload_channel: The client manages the channel completely * @doorbell_mode_switch: Channel switches to doorbell mode on M0 transition * @auto_queue: Framework will automatically queue buffers for DL traffic * @auto_start: Automatically start (open) this channel * @wake-capable: Channel capable of waking up the system */ struct mhi_channel_config { char *name; u32 num; u32 num_elements; u32 local_elements; u32 event_ring; enum dma_data_direction dir; enum mhi_ch_type type; u32 ee_mask; u32 pollcfg; enum mhi_db_brst_mode doorbell; bool lpm_notify; bool offload_channel; bool doorbell_mode_switch; bool auto_queue; bool auto_start; bool wake_capable; }; /** * struct mhi_event_config - Event ring configuration structure for controller * @num_elements: The number of elements that can be queued to this ring * @irq_moderation_ms: Delay irq for additional events to be aggregated * @irq: IRQ associated with this ring * @channel: Dedicated channel number. U32_MAX indicates a non-dedicated ring * @priority: Priority of this ring. Use 1 for now * @mode: Doorbell mode * @data_type: Type of data this ring will process * @hardware_event: This ring is associated with hardware channels * @client_managed: This ring is client managed * @offload_channel: This ring is associated with an offloaded channel */ struct mhi_event_config { u32 num_elements; u32 irq_moderation_ms; u32 irq; u32 channel; u32 priority; enum mhi_db_brst_mode mode; enum mhi_er_data_type data_type; bool hardware_event; bool client_managed; bool offload_channel; }; /** * struct mhi_controller_config - Root MHI controller configuration * @max_channels: Maximum number of channels supported * @timeout_ms: Timeout value for operations. 0 means use default * @buf_len: Size of automatically allocated buffers. 0 means use default * @num_channels: Number of channels defined in @ch_cfg * @ch_cfg: Array of defined channels * @num_events: Number of event rings defined in @event_cfg * @event_cfg: Array of defined event rings * @use_bounce_buf: Use a bounce buffer pool due to limited DDR access * @m2_no_db: Host is not allowed to ring DB in M2 state */ struct mhi_controller_config { u32 max_channels; u32 timeout_ms; u32 buf_len; u32 num_channels; struct mhi_channel_config *ch_cfg; u32 num_events; struct mhi_event_config *event_cfg; bool use_bounce_buf; bool m2_no_db; }; /** * struct mhi_controller - Master MHI controller structure * @cntrl_dev: Pointer to the struct device of physical bus acting as the MHI * controller (required) * @mhi_dev: MHI device instance for the controller * @regs: Base address of MHI MMIO register space (required) * @bhi: Points to base of MHI BHI register space * @bhie: Points to base of MHI BHIe register space * @wake_db: MHI WAKE doorbell register address * @iova_start: IOMMU starting address for data (required) * @iova_stop: IOMMU stop address for data (required) * @fw_image: Firmware image name for normal booting (required) * @edl_image: Firmware image name for emergency download mode (optional) * @rddm_size: RAM dump size that host should allocate for debugging purpose * @sbl_size: SBL image size downloaded through BHIe (optional) * @seg_len: BHIe vector size (optional) * @fbc_image: Points to firmware image buffer * @rddm_image: Points to RAM dump buffer * @mhi_chan: Points to the channel configuration table * @lpm_chans: List of channels that require LPM notifications * @irq: base irq # to request (required) * @max_chan: Maximum number of channels the controller supports * @total_ev_rings: Total # of event rings allocated * @hw_ev_rings: Number of hardware event rings * @sw_ev_rings: Number of software event rings * @nr_irqs_req: Number of IRQs required to operate (optional) * @nr_irqs: Number of IRQ allocated by bus master (required) * @mhi_event: MHI event ring configurations table * @mhi_cmd: MHI command ring configurations table * @mhi_ctxt: MHI device context, shared memory between host and device * @pm_mutex: Mutex for suspend/resume operation * @pm_lock: Lock for protecting MHI power management state * @timeout_ms: Timeout in ms for state transitions * @pm_state: MHI power management state * @db_access: DB access states * @ee: MHI device execution environment * @dev_state: MHI device state * @dev_wake: Device wakeup count * @pending_pkts: Pending packets for the controller * @transition_list: List of MHI state transitions * @transition_lock: Lock for protecting MHI state transition list * @wlock: Lock for protecting device wakeup * @st_worker: State transition worker * @fw_worker: Firmware download worker * @syserr_worker: System error worker * @state_event: State change event * @status_cb: CB function to notify power states of the device (required) * @link_status: CB function to query link status of the device (required) * @wake_get: CB function to assert device wake (optional) * @wake_put: CB function to de-assert device wake (optional) * @wake_toggle: CB function to assert and de-assert device wake (optional) * @runtime_get: CB function to controller runtime resume (required) * @runtimet_put: CB function to decrement pm usage (required) * @buffer_len: Bounce buffer length * @bounce_buf: Use of bounce buffer * @fbc_download: MHI host needs to do complete image transfer (optional) * @pre_init: MHI host needs to do pre-initialization before power up * @wake_set: Device wakeup set flag * * Fields marked as (required) need to be populated by the controller driver * before calling mhi_register_controller(). For the fields marked as (optional) * they can be populated depending on the usecase. */ struct mhi_controller { struct device *cntrl_dev; struct mhi_device *mhi_dev; void __iomem *regs; void __iomem *bhi; void __iomem *bhie; void __iomem *wake_db; dma_addr_t iova_start; dma_addr_t iova_stop; const char *fw_image; const char *edl_image; size_t rddm_size; size_t sbl_size; size_t seg_len; struct image_info *fbc_image; struct image_info *rddm_image; struct mhi_chan *mhi_chan; struct list_head lpm_chans; int *irq; u32 max_chan; u32 total_ev_rings; u32 hw_ev_rings; u32 sw_ev_rings; u32 nr_irqs_req; u32 nr_irqs; struct mhi_event *mhi_event; struct mhi_cmd *mhi_cmd; struct mhi_ctxt *mhi_ctxt; struct mutex pm_mutex; rwlock_t pm_lock; u32 timeout_ms; u32 pm_state; u32 db_access; enum mhi_ee_type ee; enum mhi_state dev_state; atomic_t dev_wake; atomic_t pending_pkts; struct list_head transition_list; spinlock_t transition_lock; spinlock_t wlock; struct work_struct st_worker; struct work_struct fw_worker; struct work_struct syserr_worker; wait_queue_head_t state_event; void (*status_cb)(struct mhi_controller *mhi_cntrl, enum mhi_callback cb); int (*link_status)(struct mhi_controller *mhi_cntrl); void (*wake_get)(struct mhi_controller *mhi_cntrl, bool override); void (*wake_put)(struct mhi_controller *mhi_cntrl, bool override); void (*wake_toggle)(struct mhi_controller *mhi_cntrl); int (*runtime_get)(struct mhi_controller *mhi_cntrl); void (*runtime_put)(struct mhi_controller *mhi_cntrl); size_t buffer_len; bool bounce_buf; bool fbc_download; bool pre_init; bool wake_set; }; /** * struct mhi_device - Structure representing a MHI device which binds * to channels * @id: Pointer to MHI device ID struct * @chan_name: Name of the channel to which the device binds * @mhi_cntrl: Controller the device belongs to * @ul_chan: UL channel for the device * @dl_chan: DL channel for the device * @dev: Driver model device node for the MHI device * @dev_type: MHI device type * @ul_chan_id: MHI channel id for UL transfer * @dl_chan_id: MHI channel id for DL transfer * @dev_wake: Device wakeup counter */ struct mhi_device { const struct mhi_device_id *id; const char *chan_name; struct mhi_controller *mhi_cntrl; struct mhi_chan *ul_chan; struct mhi_chan *dl_chan; struct device dev; enum mhi_device_type dev_type; int ul_chan_id; int dl_chan_id; u32 dev_wake; }; /** * struct mhi_result - Completed buffer information * @buf_addr: Address of data buffer * @bytes_xferd: # of bytes transferred * @dir: Channel direction * @transaction_status: Status of last transaction */ struct mhi_result { void *buf_addr; size_t bytes_xferd; enum dma_data_direction dir; int transaction_status; }; /** * struct mhi_buf - MHI Buffer description * @buf: Virtual address of the buffer * @name: Buffer label. For offload channel, configurations name must be: * ECA - Event context array data * CCA - Channel context array data * @dma_addr: IOMMU address of the buffer * @len: # of bytes */ struct mhi_buf { void *buf; const char *name; dma_addr_t dma_addr; size_t len; }; /** * struct mhi_driver - Structure representing a MHI client driver * @probe: CB function for client driver probe function * @remove: CB function for client driver remove function * @ul_xfer_cb: CB function for UL data transfer * @dl_xfer_cb: CB function for DL data transfer * @status_cb: CB functions for asynchronous status * @driver: Device driver model driver */ struct mhi_driver { const struct mhi_device_id *id_table; int (*probe)(struct mhi_device *mhi_dev, const struct mhi_device_id *id); void (*remove)(struct mhi_device *mhi_dev); void (*ul_xfer_cb)(struct mhi_device *mhi_dev, struct mhi_result *result); void (*dl_xfer_cb)(struct mhi_device *mhi_dev, struct mhi_result *result); void (*status_cb)(struct mhi_device *mhi_dev, enum mhi_callback mhi_cb); struct device_driver driver; }; #define to_mhi_driver(drv) container_of(drv, struct mhi_driver, driver) #define to_mhi_device(dev) container_of(dev, struct mhi_device, dev) /** * mhi_register_controller - Register MHI controller * @mhi_cntrl: MHI controller to register * @config: Configuration to use for the controller */ int mhi_register_controller(struct mhi_controller *mhi_cntrl, struct mhi_controller_config *config); /** * mhi_unregister_controller - Unregister MHI controller * @mhi_cntrl: MHI controller to unregister */ void mhi_unregister_controller(struct mhi_controller *mhi_cntrl); /** * mhi_driver_register - Register driver with MHI framework * @mhi_drv: Driver associated with the device */ int mhi_driver_register(struct mhi_driver *mhi_drv); /** * mhi_driver_unregister - Unregister a driver for mhi_devices * @mhi_drv: Driver associated with the device */ void mhi_driver_unregister(struct mhi_driver *mhi_drv); /** * mhi_set_mhi_state - Set MHI device state * @mhi_cntrl: MHI controller * @state: State to set */ void mhi_set_mhi_state(struct mhi_controller *mhi_cntrl, enum mhi_state state); /** * mhi_prepare_for_power_up - Do pre-initialization before power up. * This is optional, call this before power up if * the controller does not want bus framework to * automatically free any allocated memory during * shutdown process. * @mhi_cntrl: MHI controller */ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl); /** * mhi_async_power_up - Start MHI power up sequence * @mhi_cntrl: MHI controller */ int mhi_async_power_up(struct mhi_controller *mhi_cntrl); /** * mhi_sync_power_up - Start MHI power up sequence and wait till the device * device enters valid EE state * @mhi_cntrl: MHI controller */ int mhi_sync_power_up(struct mhi_controller *mhi_cntrl); /** * mhi_power_down - Start MHI power down sequence * @mhi_cntrl: MHI controller * @graceful: Link is still accessible, so do a graceful shutdown process */ void mhi_power_down(struct mhi_controller *mhi_cntrl, bool graceful); /** * mhi_unprepare_after_power_down - Free any allocated memory after power down * @mhi_cntrl: MHI controller */ void mhi_unprepare_after_power_down(struct mhi_controller *mhi_cntrl); /** * mhi_download_rddm_img - Download ramdump image from device for * debugging purpose. * @mhi_cntrl: MHI controller * @in_panic: Download rddm image during kernel panic */ int mhi_download_rddm_img(struct mhi_controller *mhi_cntrl, bool in_panic); /** * mhi_force_rddm_mode - Force device into rddm mode * @mhi_cntrl: MHI controller */ int mhi_force_rddm_mode(struct mhi_controller *mhi_cntrl); /** * mhi_get_mhi_state - Get MHI state of the device * @mhi_cntrl: MHI controller */ enum mhi_state mhi_get_mhi_state(struct mhi_controller *mhi_cntrl); #endif /* _MHI_H_ */