2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
Commit Graph

574824 Commits

Author SHA1 Message Date
Laurent Pinchart
fee8abc3bc drm: rcar-du: Add probe deferral debug messages
Print a message when the HDMI I2C slave encoder can't be found to help
debugging probe deferral issues.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:33 +02:00
Koji Matsuoka
6bc2e15cf2 drm: rcar-du: lvds: Add R-Car Gen3 support
The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration.
Add support for the Gen3 LVDS PLL parameters and startup procedure.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:32 +02:00
Laurent Pinchart
82e7c5e496 drm: rcar-du: lvds: Rename PLLEN bit to PLLON
The bit is named PLLON in the datasheet, rename it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:31 +02:00
Laurent Pinchart
5e1ac3bdc6 drm: rcar-du: lvds: Fix PLL frequency-related configuration
The frequency checks don't match the datasheet, fix them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:30 +02:00
Laurent Pinchart
d9829a3289 drm: rcar-du: lvds: Avoid duplication of clock clamp code
Replace the duplicate code by a single central function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:30 +02:00
Laurent Pinchart
2427b30377 drm: rcar-du: Add R8A7795 device support
Document the R8A7795-specific DT bindings and support them in the
driver. The HDMI and LVDS outputs are currently not supported.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:29 +02:00
Laurent Pinchart
a5e18b2b7d drm: rcar-du: Output the DISP signal on the ODDF pin
The ODDF signal, output by default on the ODDF pin, isn't used on any
board supported in the kernel. As the Gen3 Salvator-X board uses the
ODDF pin as a DISP signal, hardcode that configuration in the driver.

Use of the ODDF signal will be implemented later through proper DT-based
configuration of the DU pins.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:28 +02:00
Laurent Pinchart
d792bc77e5 drm: rcar-du: Output the DISP signal on the DISP pin
The DE signal is currently configured to be identical to the DISP
signal and is used for the same purpose. To make it clearer that the
DISP pin outputs the DISP signal, select it explicitly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:28 +02:00
Koji Matsuoka
6a8c49fc4a drm: rcar-du: Support up to 4 CRTCs
The Gen3 R8A7795 DU has 4 CRTCs, support them all.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:27 +02:00
Laurent Pinchart
dadab320e0 drm: rcar-du: Drop LVDS double dependency on OF
LVDS support depends on DRM_RCAR_DU which already depends on OF. Drop
the explicit dependency.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:27 +02:00
Koji Matsuoka
7372e8940b drm: rcar-du: Enable compilation on ARM64
The R8A7795 SoC is ARM64-based and include a DU. Enable driver
compilation on ARM64.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:26 +02:00
Koji Matsuoka
07ece19bdc drm: rcar-du: Fix compile warning on 64-bit platforms
Use %tu instead of %u to print difference between pointers.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:34:25 +02:00
Laurent Pinchart
6d62ef3ac3 drm: rcar-du: Expose the VSP1 compositor through KMS planes
On R-Car Gen3 SoCs the DU lost its ability to access memory directly and
needs to work in conjunction with the VSP to do so. This commit handles
the VSP internally to hide it from the user.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-23 09:32:44 +02:00
Laurent Pinchart
ab334e137c drm: rcar-du: Move plane allocator to rcar_du_plane.c
The plane allocator is specific to DU planes and won't be used for
VSP-based planes, move it with the rest of the DU planes code where it
belongs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:56 +02:00
Laurent Pinchart
2af0394409 drm: rcar-du: Restart the DU group when a plane source changes
Plane sources are configured by the VSPS bit in the PnDDCR4 register.
Although the datasheet states that the bit is updated during vertical
blanking, it seems that updates only occur when the DU group is held in
reset through the DSYSR.DRES bit. Restart the group if the source
changes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:55 +02:00
Laurent Pinchart
34a04f2b7b drm: rcar-du: Add VSP1 compositor support
Configure the plane source at plane setup time to source frames from
memory or from the VSP1.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:54 +02:00
Laurent Pinchart
af8ad96290 drm: rcar-du: Add VSP1 support to the planes allocator
The R8A7790 DU can source frames directly from the VSP1 devices VSPD0
and VSPD1. VSPD0 feeds DU0/1 plane 0, and VSPD1 feeds either DU2 plane 0
or DU0/1 plane 1.

Allocate the correct fixed plane when sourcing frames from VSPD0 or
VSPD1, and allocate planes in reverse index order otherwise to ensure
maximum availability of planes 0 and 1.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:54 +02:00
Laurent Pinchart
2f13c5296d drm: rcar-du: Refactor plane setup
Rename plane setup functions using more explicit names, and use local
variables to store intermediate values to increase readability. This
also prepares for VSP compositor support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:53 +02:00
Laurent Pinchart
ff967363dd drm: rcar-du: Compute plane DDCR4 register value directly
There's no need for a read-modify-write pattern, all register bits can
be set explicitly.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:52 +02:00
Laurent Pinchart
1b0fd0ea49 drm: rcar-du: Don't update planes on disabled CRTCs
A disabled CRTC can't display planes, the driver shouldn't try to
configure it when updating planes. The DRM core will store the plane
state for us, and the plane will be configured appropriately the next
time the CRTC is enabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:51 +02:00
Laurent Pinchart
6ea22ab4a0 drm: rcar-du: Remove local CRTC enabled state
The atomic framework guarantees that the CRTC enable and disable
functions will only be called when needed, there's no need to duplicate
the CRTC state check. By replacing the local CRTC enabled state check at
resume time with the CRTC active state we can remove the local CRTC
enabled state altogether.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-02-20 02:58:51 +02:00
Laurent Pinchart
c1d4b38c93 drm: rcar-du: Perform initialization/cleanup at probe/remove time
The drm driver .load() operation is prone to race conditions as it
initializes the driver after registering the device nodes. Its usage is
deprecated, inline it in the probe function and call drm_dev_alloc() and
drm_dev_register() explicitly.

For consistency inline the .unload() handler in the remove function as
well.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-20 02:58:50 +02:00
Laurent Pinchart
4c4400504f Merge remote-tracking branch 'linuxtv/vsp1' into HEAD 2016-02-20 02:58:43 +02:00
Mauro Carvalho Chehab
18922936dc [media] vsp1_drm.h: add missing prototypes
drivers/media/platform/vsp1/vsp1_drm.c:47:5: warning: no previous prototype for 'vsp1_du_init' [-Wmissing-prototypes]
 int vsp1_du_init(struct device *dev)
     ^
drivers/media/platform/vsp1/vsp1_drm.c:76:5: warning: no previous prototype for 'vsp1_du_setup_lif' [-Wmissing-prototypes]
 int vsp1_du_setup_lif(struct device *dev, unsigned int width,
     ^
drivers/media/platform/vsp1/vsp1_drm.c:221:6: warning: no previous prototype for 'vsp1_du_atomic_begin' [-Wmissing-prototypes]
 void vsp1_du_atomic_begin(struct device *dev)
      ^
drivers/media/platform/vsp1/vsp1_drm.c:273:5: warning: no previous prototype for 'vsp1_du_atomic_update' [-Wmissing-prototypes]
 int vsp1_du_atomic_update(struct device *dev, unsigned int rpf_index,
     ^
drivers/media/platform/vsp1/vsp1_drm.c:451:6: warning: no previous prototype for 'vsp1_du_atomic_flush' [-Wmissing-prototypes]
 void vsp1_du_atomic_flush(struct device *dev)
      ^

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 10:07:20 -02:00
Laurent Pinchart
5aa2eb3c86 [media] v4l: vsp1: Configure device based on IP version
The IP version number carries enough information to identify the exact
device instance features. Drop the related DT properties and use the IP
version instead.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:43:46 -02:00
Takashi Saito
1517b03923 [media] v4l: vsp1: Add display list support
Display lists contain lists of registers and associated values to be
applied atomically by the hardware. They lower the pressure on interrupt
processing delays when reprogramming the device as settings can be
prepared well in advance and queued to the hardware without waiting for
the end of the current frame.

Display list support is currently limited to the DRM pipeline.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:40:47 -02:00
Laurent Pinchart
7f2d50f8da [media] v4l: vsp1: Add support for the R-Car Gen3 VSP2
Add DT compatible strings for the VSP2 instances found in the R-Car Gen3
SoCs and support them in the vsp1 driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:32:49 -02:00
Laurent Pinchart
7b4baddca6 [media] v4l: vsp1: Implement atomic update for the DRM driver
Add two API functions named vsp1_du_atomic_begin() and
vsp1_du_atomic_flush() to signal the start and end of an atomic update.
The vsp1_du_setup_rpf() function is renamed to vsp1_du_atomic_update()
for consistency.

With this new API, the driver will reprogram all modified inputs
atomically before restarting the video stream.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:31:19 -02:00
Laurent Pinchart
3afb193991 [media] v4l: vsp1: Disconnect unused RPFs from the DRM pipeline
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:30:20 -02:00
Laurent Pinchart
f3af9572e8 [media] v4l: vsp1: Add VSP+DU support
Implement internal control of the VSP pipeline to be used by the DU
DRM/KMS driver when using the VSP as an internal composer handled
through DRM/KMS only.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:29:32 -02:00
Laurent Pinchart
babca007e7 [media] v4l: vsp1: Don't validate links when the userspace API is disabled
As the pipeline is configured internally by the driver when the
userspace API is disabled its configuration can be trusted and link
validation isn't needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:26:15 -02:00
Laurent Pinchart
3dbb610014 [media] v4l: vsp1: Set the alpha value manually in RPF and WPF s_stream handlers
The RPF and WPF alpha values are set through V4L2 controls and applied
when starting the video stream by a call to v4l2_ctrl_handler_setup().
As that function uses the control handler mutex it can't be called in
interrupt context, where the VSP+DU pipeline handler might need to
reconfigure the pipeline.

Set the alpha value manually in the RPF and WPF s_stream handler to
ensure that the hardware is properly configured even when controlled
without the userspace API. If the userspace API is enabled protect that
with the control lock to avoid race conditions with userspace.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:24:32 -02:00
Laurent Pinchart
96bfa6a5fd [media] v4l: vsp1: Make pipeline inputs array index by RPF index
The pipeline inputs array stores pointers to all RPFs contained in the
pipeline. It's currently indexed contiguously by adding RPFs in the
order they are found during graph walk. This can't easily support
dynamic addition and removal of RPFs while streaming, which will be
required for combined VSP+DU support.

Make the array indexed by RPF index instead and skip NULL elements when
iterating over RPFs.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:22:38 -02:00
Laurent Pinchart
f2ed459db7 [media] v4l: vsp1: Make the userspace API optional
The R-Car Gen3 SoCs include VSP instances dedicated to the DU that will
be controlled entirely by the rcar-du-drm driver through the KMS API. To
support that use case make the userspace V4L2 API optional.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:19:55 -02:00
Laurent Pinchart
c618b185fd [media] v4l: vsp1: Move format info to vsp1_pipe.c
Format information and the related helper function are not specific to
the V4L2 API, move them from vsp1_video.c to vsp1_pipe.c.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:18:12 -02:00
Laurent Pinchart
f74be41221 [media] v4l: vsp1: Make the BRU optional
Not all VSP instances have a BRU on R-Car Gen3, make it optional. Set
the feature unconditionally for now, this will be fixed when adding Gen3
support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:17:06 -02:00
Laurent Pinchart
a96c5fa450 [media] v4l: vsp1: Make number of BRU inputs configurable
The R-Car Gen3 family has 5-inputs BRUs, support them by making the
number of BRU inputs configurable.

As the driver assumes that the number of BRU inputs is equal to the
number of RPFs, replace the BRU_MAX_INPUTS macro with VSP1_MAX_RPF to
make the assumption apparent.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:16:07 -02:00
Laurent Pinchart
665b693c82 [media] v4l: vsp1: Move entity route setup function to vsp1_entity.c
The function will be used by the DU code, move it out of vsp1_video.c.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:14:08 -02:00
Laurent Pinchart
dc3bdddbd0 [media] v4l: vsp1: Remove unused module read functions
Several module read functions are not used, remove them.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:13:30 -02:00
Laurent Pinchart
f6acfcdc5b [media] v4l: vsp1: Set the SRU CTRL0 register when starting the stream
Commit 58f896d859 ("[media] v4l: vsp1: sru: Make the intensity
controllable during streaming") refactored the stream start code and
removed the SRU CTRL0 register write by mistake. Add it back.

Fixes: 58f896d859 ("[media] v4l: vsp1: sru: Make the intensity controllable during streaming")

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:12:26 -02:00
Laurent Pinchart
5dc1e5fb47 [media] v4l: vsp1: Fix typo in VI6_DISP_IRQ_STA_DST register bit name
Rename the VI6_DISP_IRQ_STA_DSE register bit to VI6_DISP_IRQ_STA_DST to
fix a typo and match the datasheet.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:11:34 -02:00
Laurent Pinchart
ba3a5c6dc3 [media] v4l: vsp1: Document the vsp1_pipeline structure
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:10:09 -02:00
Laurent Pinchart
a07dcc53b1 [media] v4l: vsp1: Extract link creation to separate function
Link creation will be handled differently for the DU pipeline.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:09:37 -02:00
Laurent Pinchart
f8562f218b [media] v4l: vsp1: Reuse local variable instead of recomputing it
No need to waste CPU cycles when the value we need is already available.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:07:46 -02:00
Laurent Pinchart
f294c2f70e [media] v4l: vsp1: Extract pipeline initialization code into a function
The code will be reused outside of vsp1_video.c.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:07:07 -02:00
Laurent Pinchart
945f127677 [media] v4l: vsp1: Rename video pipeline functions to use vsp1_video prefix
Those functions are specific to video nodes, rename them for
consistency.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:06:29 -02:00
Laurent Pinchart
dba4a18073 [media] v4l: vsp1: Split pipeline management code from vsp1_video.c
The code will be used to control the vsp1 driver from the DU driver
without using video nodes.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:04:52 -02:00
Laurent Pinchart
3f725b7eee [media] v4l: vsp1: Decouple pipeline end of frame processing from vsp1_video
To make the pipeline structure and operations usable without video
devices the frame end processing must be decoupled from struct
vsp1_video. Implement this by calling the video frame end function
indirectly through a function pointer in struct vsp1_pipeline.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 09:01:23 -02:00
Laurent Pinchart
2f2db2f206 [media] v4l: vsp1: Remove struct vsp1_pipeline num_video field
The field is always equal to the num_inputs field plus one, remove the
duplicate.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 08:59:09 -02:00
Laurent Pinchart
faf2644d8a [media] v4l: vsp1: Move vsp1_video pointer from vsp1_entity to vsp1_rwpf
Only RPFs and WPFs can be associated with video nodes, don't waste
memory by storing the video pointer in all entities.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-19 08:58:05 -02:00