We are using this function, now that we have introduced
the support for UTMI clock for computing the USB host rate.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
at91sam9n12 has Full-speed only USB. So we should add
it to the list in at91_pllb_usbfs_clock_init() function.
Moreover, at91sam9n12 has an unusual PMC in the sense that it
has a PLLB but also has a USB clock register.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Bo Shen <voice.shen@atmel.com>
All non-PC platforms are supposed to be dependent on this
option.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Jun Nakajima <jnakajim@gmail.com>
Link: http://lkml.kernel.org/n/tip-Bcihhqhstm67fchjnkxoiJbu@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This will allow me to call functions that have multiple
arguments if fastpath fails. This is required to support ticket
mutexes, because they need to be able to pass an extra argument
to the fail function.
Originally I duplicated the functions, by adding
__mutex_fastpath_lock_retval_arg. This ended up being just a
duplication of the existing function, so a way to test if
fastpath was called ended up being better.
This also cleaned up the reservation mutex patch some by being
able to call an atomic_set instead of atomic_xchg, and making it
easier to detect if the wrong unlock function was previously
used.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: robclark@gmail.com
Cc: rostedt@goodmis.org
Cc: daniel@ffwll.ch
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130620113105.4001.83929.stgit@patser
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Otherwise early boot exceptions such as instructions errors due to
configuration mismatch between kernel and hardware go off to la-la land,
as opposed to hitting the handler and panic()'ing properly.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
With ECR now part of pt_regs
* No need to propagate from lowest asm handlers as arg
* No need to save it in tsk->thread.cause_code
* Avoid bit chopping to access the bit-fields
More code consolidation, cleanup
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Recent Intel CPUs like Haswell and IvyBridge have a new
alternative MSR range for perfctrs that allows writing the full
counter width. Enable this range if the hardware reports it
using a new capability bit.
Currently the perf code queries CPUID to get the counter width,
and sign extends the counter values as needed. The traditional
PERFCTR MSRs always limit to 32bit, even though the counter
internally is larger (usually 48 bits on recent CPUs)
When the new capability is set use the alternative range which
do not have these restrictions.
This lowers the overhead of perf stat slightly because it has to
do less interrupts to accumulate the counter value. On Haswell
it also avoids some problems with TSX aborting when the end of
the counter range is reached.
( See the patch "perf/x86/intel: Avoid checkpointed counters
causing excessive TSX aborts" for more details. )
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1372173153-20215-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
pt_regs->event was set with artificial values to identify the low level
system event (syscall trap / breakpoint trap / exceptions / interrupts)
With r8 saving out of the way, the full word can be used to save real
ECR (Exception Cause Register) which helps idenify the event naturally,
including additional info such as cause code, param.
Only for Interrupts, where ECR is not applicable, do we resort to
synthetic non ECR values.
SAVE_ALL_TRAP/EXCEPTIONS can now be merged as they both use ECR with
different runtime values.
The ptrace helpers now use the sub-fields of ECR to distinguish the
events (e.g. vector 0x25 is trap, param 0 is syscall...)
The following benefits will follow:
(1) This centralizes the location of where ECR is saved and will allow
the cleanup of task->thread.cause_code ECR placeholder which is set
in non-uniform way. Then ARC VM code can safely rely on it being
there for purpose of finer grained VM_EXEC dcache flush (based on
exec fault: I-TLB Miss)
(2) Further, ECR being passed around from low level handlers as arg can
be eliminated as it is part of standard reg-file in pt_regs
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
In previous version of SPI driver we where using different compatibility stings
for finding SPI features. We are now using the IP revision information.
So we stay with the unique compatibility string for this driver:
"atmel,at91rm9200-spi".
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
commit 20d49e9ccf
(ARM: OMAP5: voltagedomain data: Add OMAP5 voltage domain data)
Introduced dummy volt data for OMAP5 with OMAP4460 voltage information.
However with the fixes introduced in later patches
commit cd8abed1da
(ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm
associated to a pwrdm)
We are no longer restricted in that respect. Further, OPP voltage
information is supposed to be provided by dts information. This needs
to be added in future patches as various voltage modules are converted
to dts.
This also fixes the build breakage for voltagedomains54xx_data.c when just
OMAP5 SoC is enabled: https://patchwork.kernel.org/patch/2764191/
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Signed-off-by: Kevin Hilman <khilman@linaro.org>
The control registers are unsigned long (32 bits on i386, 64 bits on
x86-64), and so make that manifest in the data type for the various
constants. Add defines with a _BIT suffix which defines the bit
number, as opposed to the bit mask.
This should resolve some issues with ~bitmask that Linus discovered.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-cwckhbrib2aux1qbteaebij0@git.kernel.org
Bit 1 in the x86 EFLAGS is always set. Name the macro something that
actually tries to explain what it is all about, rather than being a
tautology.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/n/tip-f10rx5vjjm6tfnt8o1wseb3v@git.kernel.org
There is some confusion about the 'mce_poll_banks' and 'mce_banks_owned'
per-cpu bitmaps. Provide comments so that we all know exactly what these
are used for, and why.
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
From Srinivas Kandagatla <srinivas.kandagatla@st.com>:
This patch-set adds basic support for STMicroelectronics STi series SOCs
which includes STiH415 and STiH416 with B2000 and B2020 board support.
STiH415 and STiH416 are dual-core ARM Cortex-A9 CPU, designed for
use in Set-top-boxes. The SOC support is available in mach-sti which
contains support code for STiH415, STiH416 SOCs including the generic
board support.
The reason for adding two SOCs at this patch set is to show that no new
C code is required for second SOC(STiH416) support.
* sti/soc:
ARM: stih41x: Add B2020 board support
ARM: stih41x: Add B2000 board support
ARM: sti: Add DEBUG_LL console support
ARM: sti: Add STiH416 SOC support
ARM: sti: Add STiH415 SOC support
Signed-off-by: Olof Johansson <olof@lixom.net>
From Daniel Tang <dt.tangr@gmail.com>
This is the initial platform code for the TI-Nspire graphing
calculators. The platform support is rather unspectacular, but still
contains platform data for the LCD panel, which will get removed once
there is a DT binding for the AMBA CLCD driver.
* nspire/soc:
arm: Add Initial TI-Nspire support
arm: Add device trees for TI-Nspire hardware
Signed-off-by: Olof Johansson <olof@lixom.net>
B2020 ADI board is reference board for STIH415/416 SOCs, it has 2 x
UART, 4x USB, 1 x Ethernet, 1 x SATA, 1 x PCIe, and 2GB RAM with
standard set-top box IPs.
This patch adds initial support to B2020 with STiH415/416 with SBC_UART1
as console and a heard beat LED.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Stephen Gallimore <stephen.gallimore@st.com>
CC: Stuart Menefy <stuart.menefy@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
B2000 board is reference board for STIH415/416 SOCs, it has
2 x UART, 4x USB, 2 x Ethernet, 1 x SATA, 1 x PCIe, and 1GB RAM.
This patch add initial support to b2000 with STiH415/416 with UART2 as
console and a heard beat LED.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Stephen Gallimore <stephen.gallimore@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds low level debug uart support to sti based SOCs.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
The STiH416 is advanced HD AVC processor with 3D graphics acceleration
and 1.2-GHz ARM Cortex-A9 SMP CPU.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Stephen Gallimore <stephen.gallimore@st.com>
CC: Stuart Menefy <stuart.menefy@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
The STiH415 is the next generation of HD, AVC set-top box processors for
satellite, cable, terrestrial and IP-STB markets. It is an ARM Cortex-A9
1.0 GHz, dual-core CPU.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
CC: Stephen Gallimore <stephen.gallimore@st.com>
CC: Stuart Menefy <stuart.menefy@st.com>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
On one sytem that mtrr range is more then 44bits, in dmesg we have
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-through
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 [000080000000-0000FFFFFFFF] mask 3FFF80000000 uncachable
[ 0.000000] 1 [380000000000-38FFFFFFFFFF] mask 3F0000000000 uncachable
[ 0.000000] 2 [000099000000-000099FFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 3 [00009A000000-00009AFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 4 [381FFA000000-381FFBFFFFFF] mask 3FFFFE000000 write-through
[ 0.000000] 5 [381FFC000000-381FFC0FFFFF] mask 3FFFFFF00000 write-through
[ 0.000000] 6 [0000AD000000-0000ADFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 7 [0000BD000000-0000BDFFFFFF] mask 3FFFFF000000 write-through
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
but /proc/mtrr report wrong:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x80000000000 (8388608MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through
reg04: base=0x81ffa000000 (8519584MB), size= 32MB, count=1: write-through
reg05: base=0x81ffc000000 (8519616MB), size= 1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining
so bit 44 and bit 45 get cut off.
We have problems in arch/x86/kernel/cpu/mtrr/generic.c::generic_get_mtrr().
1. for base, we miss cast base_lo to 64bit before shifting.
Fix that by adding u64 casting.
2. for size, it only can handle 44 bits aka 32bits + page_shift
Fix that with 64bit mask instead of 32bit mask_lo, then range could be
more than 44bits.
At the same time, we need to update size_or_mask for old cpus that does
support cpuid 0x80000008 to get phys_addr. Need to set high 32bits
to all 1s, otherwise will not get correct size for them.
Also fix mtrr_add_page: it should check base and (base + size - 1)
instead of base and size, as base and size could be small but
base + size could bigger enough to be out of boundary. We can
use boot_cpu_data.x86_phys_bits directly to avoid size_or_mask.
So When are we going to have size more than 44bits? that is 16TiB.
after patch we have right ouput:
reg00: base=0x080000000 ( 2048MB), size= 2048MB, count=1: uncachable
reg01: base=0x380000000000 (58720256MB), size=1048576MB, count=1: uncachable
reg02: base=0x099000000 ( 2448MB), size= 16MB, count=1: write-through
reg03: base=0x09a000000 ( 2464MB), size= 16MB, count=1: write-through
reg04: base=0x381ffa000000 (58851232MB), size= 32MB, count=1: write-through
reg05: base=0x381ffc000000 (58851264MB), size= 1MB, count=1: write-through
reg06: base=0x0ad000000 ( 2768MB), size= 16MB, count=1: write-through
reg07: base=0x0bd000000 ( 3024MB), size= 16MB, count=1: write-through
reg08: base=0x09b000000 ( 2480MB), size= 16MB, count=1: write-combining
-v2: simply checking in mtrr_add_page according to hpa.
[ hpa: This probably wants to go into -stable only after having sat in
mainline for a bit. It is not a regression. ]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1371162815-29931-1-git-send-email-yinghai@kernel.org
Cc: <stable@vger.kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pull s390 fixes from Martin Schwidefsky:
"A couple of last-minute fixes: a build regression for !SMP, a recent
memory detection patch caused kdump to break, a regression in regard
to sscanf vs reboot from FCP, and two fixes in the DMA mapping code
for PCI"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ipl: Fix FCP WWPN and LUN format strings for read
s390/mem_detect: fix memory hole handling
s390/dma: support debug_dma_mapping_error
s390/dma: fix mapping_error detection
s390/irq: Only define synchronize_irq() on SMP
Pull powerpc bugfix from Ben Herrenschmidt:
"This is a fix for a regression causing a freescale "83xx" based
platforms to crash on boot due to some PCI breakage"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc/pci: Fix boot panic on mpc83xx (regression)
tegra_pmc_parse_dt() references __initconst data. Fix it to be __init.
This matches its only usage; a call from tegra_pmc_init() which is
already __init. This fixes:
WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in reference
from the function tegra_pmc_parse_dt() to the (unknown reference)
.init.rodata:(unknown)
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- add pinctrl support for exynos5420
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Dvn4
-----END PGP SIGNATURE-----
Merge tag 'soc-exynos5420-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
From Kukjin Kim, this adds pinctrl support for Exynos 5420.
* tag 'soc-exynos5420-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
pinctrl: exynos: add exynos5420 SoC specific data
ARM: dts: add pinctrl support to EXYNOS5420
Signed-off-by: Olof Johansson <olof@lixom.net>
Use irq_get_trigger_type() to get the IRQ trigger type flags
instead calling irqd_get_trigger_type(irq_desc_get_irq_data(irq))
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1371228049-27080-7-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use irq_get_trigger_type() to get the IRQ trigger type flags
instead calling irqd_get_trigger_type(irq_get_irq_data(irq))
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1371228049-27080-6-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
This removes all the ia64 uses of the __cpuinit macros.
[1] https://lkml.org/lkml/2013/5/20/589
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
The following commit caused a fatal oops when booting on mpc83xx with
a non-express PCI bus (regardless of whether a PCI device is present):
commit 50d8f87d2b
Author: Rojhalat Ibrahim <imr@rtschenk.de>
Date: Mon Apr 8 10:15:28 2013 +0200
powerpc/fsl-pci Make PCIe hotplug work with Freescale PCIe controllers
Up to now the PCIe link status on Freescale PCIe controllers was only
checked once at boot time. So hotplug did not work. With this patch the
link status is checked on every config read. PCIe devices not present at
boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'.
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
This patch fixes the issue by calling setup_indirect_pci for all device types.
fsl_indirect_read_config is now only used for booke/86xx PCIe controllers.
Reported-by: Michael Guntsche <mike@it-loops.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Move the existing clock code in mach-msm to the common clock
framework. We lose our capability to set the rate of and enable a
clock through debugfs. This is ok though because the debugfs
features are mainly used for testing and development of new clock
code.
To maintain compatibility with the original MSM clock code we
make a wrapper for clk_reset() that calls the struct msm_clk
specific reset function. This is necessary for the usb and sdcc
devices on MSM until a better suited API is made available.
Cc: Saravana Kannan <skannan@codeaurora.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
To move closer to the generic struct clock framework move the
proc_comm based clock code to a platform driver. The data
describing the struct clks still live in the devices-$ARCH file,
but the clock initialization is done at driver binding time.
Cc: Saravana Kannan <skannan@codeaurora.org>
Reviewed-by: Pankaj Jangra <jangra.pankaj9@gmail.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
In the near future we'll be moving clock-pcom to a platform
driver, in which case these two users of clk_get() in mach-msm
need to be updated. Have board-trout-panel.c make the proc_comm
call directly so that we don't have to port this board specific
code to the driver right now and reorder the initcall order of
dma.c so that it initializes after the clock driver probes but
before any drivers use dma APIs.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
This file is not used outside of the two users in the clock-7x30
array. Those two clocks are virtual "source" clocks that don't
really need to exist outside of the clock driver. Let's remove
them from the array, since they're not doing anything anyway, and
then remove the clock-7x30.h include file along with it.
Cc: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
There are no users of this API anymore so let's just remove it.
If a need arises in the future we can extend the common clock API
to handle it.
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Nobody is using this API upstream and it's just contributing
cruft. Remove it so the MSM clock API is closer to the generic
struct clock API.
Acked-by: Saravana Kannan <skannan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: David Brown <davidb@codeaurora.org>
Enable the PC parallel port and other related options in the Q40-specific
and multi-platform defconfigs.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
To use the PC parallel port driver on Q40, we need non-standard versions of
the insl/outsl accessors. Make sure to undefine them first, to kill this
compiler warning:
In file included from drivers/parport/parport_pc.c:67:
arch/m68k/include/asm/parport.h:14:1: warning: "insl" redefined
In file included from arch/m68k/include/asm/io.h:4,
from include/linux/scatterlist.h:10,
from include/linux/dma-mapping.h:9,
from drivers/parport/parport_pc.c:54:
arch/m68k/include/asm/io_mm.h:370:1: warning: this is the location of the previous definition
In file included from drivers/parport/parport_pc.c:67:
arch/m68k/include/asm/parport.h:15:1: warning: "outsl" redefined
In file included from arch/m68k/include/asm/io.h:4,
from include/linux/scatterlist.h:10,
from include/linux/dma-mapping.h:9,
from drivers/parport/parport_pc.c:54:
arch/m68k/include/asm/io_mm.h:373:1: warning: this is the location of the previous definition
Reported-by: Thorsten Glaser <tg@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
When compiling a MMU kernel with CPU_HAS_ADDRESS_SPACES=n (e.g. "MMU=y
allnoconfig": "echo CONFIG_MMU=y > allno.config && make KCONFIG_ALLCONFIG=1
allnoconfig"), we use plain "move" instead of "moves", and I got:
CC arch/m68k/lib/uaccess.o
{standard input}: Assembler messages:
{standard input}:47: Error: operands mismatch -- statement `move.b %a0,(%a1)' ignored
This happens because plain "move" doesn't support byte transfers between
memory and address registers, while "moves" does.
Fix the asm constraints for __generic_copy_from_user(),
__generic_copy_to_user(), and __clear_user() to only use data registers
when accessing userspace.
Also, relax the asm constraints for 16-bit userspace accesses in
__put_user() and __get_user(), as both "move" and "moves" do support
such transfers between memory and address registers.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
To get vectored interrupts working we need to switch from the default
handler handle_bad_irq() to something more sensible. Tested on a MVME177
board.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
'oldmant.m32[1]' is 'unsigned long' which can never be '< 0', and the
original author wanted to check whether the highest bit is set.
So make the bit test explicit (which is better than casting from 'unsigned
long' to 'long').
The related warning: (with EXTRA_CFLAGS=-W ARCH=m68k for allmodconfig)
arch/m68k/math-emu/fp_arith.c:522:4: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Allow CONFIG_EARLY_PRINTK without requiring both CONFIG_EMBEDDED and
CONFIG_DEBUG. Default to disabled.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Gcc may replace calls to standard string functions by open code and/or
calls to other standard string functions. If the replacement function is
not available out-of-line, link errors will happen.
To avoid this, the out-of-line versions were provided by
arch/m68k/lib/string.c, but they were usually not linked in anymore as
typically none of its symbols are referenced by built-in code.
However, if any module would need them, they would not be available.
Hence remove the inline strcpy() and strcat() implementations, remove
arch/m68k/lib/string.c, and let the generic string library code handle it.
Impact on a typical kernel build seems minimal or nonexistent:
- .text : 0x00001000 - 0x002aac74 (2728 KiB)
- .data : 0x002ada48 - 0x00392148 ( 914 KiB)
+ .text : 0x00001000 - 0x002aacf4 (2728 KiB)
+ .data : 0x002adac8 - 0x00392148 ( 914 KiB)
See also commit e00c73ee05 ("m68k: Remove
inline strlen() implementation").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
--------------------------------------
This pull request adds DT and runtime PM to
EDMA ARM private API so it can be used on
DT enabled DaVinci and OMAP platforms.
Also adds DMA channel crossbar mapping
support to be used by DT-enabled platforms
which use it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=h9EO
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
From Sekhar Nori:
DaVinci SoC updates for v3.11 - part 2
This pull request adds DT and runtime PM to
EDMA ARM private API so it can be used on
DT enabled DaVinci and OMAP platforms.
Also adds DMA channel crossbar mapping
support to be used by DT-enabled platforms
which use it.
* tag 'davinci-for-v3.11/soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
dmaengine: edma: enable build for AM33XX
ARM: edma: Add EDMA crossbar event mux support
ARM: edma: Add DT and runtime PM support to the private EDMA API
dmaengine: edma: Add TI EDMA device tree binding
ARM: edma: Convert to devm_* api
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
arm26 support in Linux is long gone, yet it left an interresting,
fossilized trace in the decompressor.
Remove it so people won't get confused about what teqp is actually
doing here...
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Looking into the active_asids array is not enough, as we also need
to look into the reserved_asids array (they both represent processes
that are currently running).
Also, not holding the ASID allocator lock is racy, as another CPU
could schedule that process and trigger a rollover, making the erratum
workaround miss an IPI.
Exposing this outside of context.c is a little ugly on the side, so
let's define a new entry point that the erratum workaround can call
to obtain the cpumask.
Cc: <stable@vger.kernel.org> # 3.9
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
On a CPU that never ran anything, both the active and reserved ASID
fields are set to zero. In this case the ASID_TO_IDX() macro will
return -1, which is not a very useful value to index a bitmap.
Instead of trying to offset the ASID so that ASID #1 is actually
bit 0 in the asid_map bitmap, just always ignore bit 0 and start
the search from bit 1. This makes the code a bit more readable,
and without risk of OoB access.
Cc: <stable@vger.kernel.org> # 3.9
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When a CPU is running a process, the ASID for that process is
held in a per-CPU variable (the "active ASIDs" array). When
the ASID allocator handles a rollover, it copies the active
ASIDs into a "reserved ASIDs" array to ensure that a process
currently running on another CPU will continue to run unaffected.
The active array is zero-ed to indicate that a rollover occurred.
Because of this mechanism, a reserved ASID is only remembered for
a single rollover. A subsequent rollover will completely refill
the reserved ASIDs array.
In a severely oversubscribed environment where a CPU can be
prevented from running for extended periods of time (think virtual
machines), the above has a horrible side effect:
[P{a} denotes process P running with ASID a]
CPU-0 CPU-1
A{x} [active = <x 0>]
[suspended] runs B{y} [active = <x y>]
[rollover:
active = <0 0>
reserved = <x y>]
runs B{y} [active = <0 y>
reserved = <x y>]
[rollover:
active = <0 0>
reserved = <0 y>]
runs C{x} [active = <0 x>]
[resumes]
runs A{x}
At that stage, both A and C have the same ASID, with deadly
consequences.
The fix is to preserve reserved ASIDs across rollovers if
the CPU doesn't have an active ASID when the rollover occurs.
Cc: <stable@vger.kernel.org> # 3.9
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Carinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When booting fewer cores than are physically present on a versatile
platform (e.g. when passing maxcpus=N on the command line), some
secondary cores may remain in the holding pen, which is marked __INIT,
as each CPU's gic cpumask is initialised to 0xff, and thus an IPI to any
CPU will wake up *all* secondaries. This behaviour is crucial to the GIC
cpumask self-discovery. Late in the boot process, the memory comprising
the holding pen will be released to the kernel for more general use, and
may be overwritten with arbitrary data, which can cause the held
secondaries to start behaving unpredictably. This can lead to all manner
of odd behaviour from the kernel.
As preventing cpus from entering the pen would require invasive changes
to the GIC driver and to existing dts used in the wild, we instead
remove the __INIT marker from the pen, keeping it around and leaving the
unused secondary CPUs dormant.
Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-June/175039.html
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Because of inline asm usage in platsmp.c, smc instruction
creates build failure for ARM V6+V7 build where as using instruction
encoding for smc breaks the thumb2 build.
So move the code snippet to separate asm file and mark
it with 'armv7-a$(plus_sec)' to avoid any build issues.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
With this change, we no longer lose the innermost entry in the user-mode
part of the call chain. See also the x86 port, which includes the ip.
It's possible to partially work around this problem by post-processing
the data to use the PERF_SAMPLE_IP value, but this works only if the CPU
wasn't in the kernel when the sample was taken.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jed Davis <jld@mozilla.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Since commit 6a1c53124a the user writeable TLS register was zeroed to
prevent it from being used as a covert channel between two tasks.
There are more and more applications coming to Windows RT,
Wine could support them, but mostly they expect to have
the thread environment block (TEB) in TPIDRURW.
This patch preserves that register per thread instead of clearing it.
Unlike the TPIDRURO, which is already switched, the TPIDRURW
can be updated from userspace so needs careful treatment in the case that we
modify TPIDRURW and call fork(). To avoid this we must always read
TPIDRURW in copy_thread.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jonathan Austin <jonathan.austin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
With the new default platform code, we can always boot using DT
without requiring a board file, but we cannot build a kernel
unless we select at least one CPU core, which breaks some
"randconfig" builds.
This adapts the ARCH_MULTI_V4T and ARCH_MULTI_V5 options so we
always default to a common CPU core if no platform was enabled
that picks something else. The default we pick for ARMv4T is
ARM920T, while for ARMv5 we pick ARM926T.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is required for building a kernel that enables only
IMX6SL but not IMX6Q, which would get a build error when
syscon is not available.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Selecting this symbol causes a build warning without SMP:
warning: (ARCH_KEYSTONE) selects ARM_ERRATA_798181 which has unmet direct dependencies (CPU_V7 && SMP)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
This is required for building a kernel that enables only
scb9328 and would not get the i.MX1 specific files
otherwise.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sascha Hauer <kernel@pengutronix.de>
If AM43x and SMP is selected, OMAP4 & OMAP5 deselected, build error as
follows,
arch/arm/mach-omap2/built-in.o: In function `scu_gp_set':
arch/arm/mach-omap2/sleep44xx.S:131: undefined reference to `omap4_get_scu_base'
arch/arm/mach-omap2/sleep44xx.S:132: undefined reference to `scu_power_mode'
arch/arm/mach-omap2/built-in.o: In function `scu_gp_clear':
arch/arm/mach-omap2/sleep44xx.S:227: undefined reference to `omap4_get_scu_base'
arch/arm/mach-omap2/sleep44xx.S:229: undefined reference to `scu_power_mode'
Resolve it by building sleep44xx.S only for OMAP4 & OMAP5.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The HAVE_PWM symbol is only for legacy platforms that provide
the PWM API without using the generic framework. MXS actually
uses that framework, and selecting the symbol anyway might
cause build errors like
drivers/built-in.o: In function `pwm_beeper_resume':
:(.text+0x1f4fc0): undefined reference to `pwm_config'
:(.text+0x1f4fc8): undefined reference to `pwm_enable'
drivers/built-in.o: In function `pwm_beeper_suspend':
:(.text+0x1f4ffc): undefined reference to `pwm_disable'
when CONFIG_PWM is disabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
When building a kernel without CONFIG_PM, we get a link
error from referencing mxs_pm_init in the machine
descriptor. This defines a macro to NULL for that case.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
This commit fixes the regression on Armada 370 (the kernal hang during
boot) introduced by the commit: "ARM: 7691/1: mm: kill unused
TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead".
When coming out of either a Wait for Interrupt (WFI) or a Wait for
Event (WFE) IDLE states, a specific timing sensitivity exists between
the retiring WFI/WFE instructions and the newly issued subsequent
instructions. This sensitivity can result in a CPU hang scenario. The
workaround is to insert either a Data Synchronization Barrier (DSB) or
Data Memory Barrier (DMB) command immediately after the WFI/WFE
instruction.
This commit was based on the work of Lior Amsalem, but heavily
modified to apply the errata fix dynamically according to the
processor type thanks to the suggestions of Russell King and Nicolas
Pitre.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 1bc3974 (ARM: 7755/1: handle user space mapped pages in
flush_kernel_dcache_page) moved the implementation of
flush_kernel_dcache_page() into mm/flush.c but did not implement it
on noMMU ARM.
Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Acked-by: Kevin Hilman <khilman@linaro.org>
Cc: <stable@vger.kernel.org> # 3.2+: 1bc3974: ARM: 7755/1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The __cpu_logical_map array is statically initialized to 0, which is a valid
MPIDR value. To prevent issues with the current implementation, this patch
defines an MPIDR_INVALID value, and statically initializes the
__cpu_logical_map[] array to it. Entries in the arm_dt_init_cpu_maps()
tmp_map array used to stash DT reg properties while parsing DT are initialized
with the MPIDR_INVALID value as well for consistency.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The introduction of the cpu-map topology node in the cpus node implies
that cpus node might have children that are not cpu nodes. The DT
parsing code needs updating otherwise it would check for cpu nodes
properties in nodes that are not required to contain them, resulting
in warnings that have no bearing on bindings defined in the dts source file.
Cc: <stable@vger.kernel.org> [3.8+]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
As it was already suggested by Russell King and Arnd Bergmann:
https://lkml.org/lkml/2013/5/16/133
moxart and gemini seem to be the only platforms using CPU_FA526,
and instead of pointing arm_pm_idle to an empty function from
platform code, it makes sense to remove WFI code from the processor
specific idle function.
Applies to arm-soc/for-next (and 3.10-rc1).
Changes since v1:
1. remove WFI but make sure cpu_fa526_do_idle do not fall through
to cpu_fa526_dcache_clean_area
Note: moxart boots and prints to UART without this patch, but input is broken.
Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Enable TI EDMA option on OMAP and TI_PRIV_EDMA
Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The following git commit changed the behavior of sscanf:
commit 53809751ac
Author: Jan Beulich <JBeulich@suse.com>
Date: Mon Dec 17 16:01:31 2012 -0800
sscanf: don't ignore field widths for numeric conversions
This broke the WWPN and LUN sysfs attributes for s390 reipl and dump
on panic.
Example:
$ echo 0x0123456701234567 > /sys/firmware/reipl/fcp/wwpn
$ cat /sys/firmware/reipl/fcp/wwpn
0x0001234567012345
So fix this and use format strings that work also with the
new sscanf implementation:
$ echo 0x012345670123456789 > /sys/firmware/reipl/fcp/wwpn
$ cat /sys/firmware/reipl/fcp/wwpn
0x0123456701234567
Cc: stable@vger.kernel.org # 3.8+
Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
EDMA supports a cross bar which provides ability
to mux additional events into physical channels
present in the channel controller.
This is required when the number of events present
in the system are more than number of available
physical channels.
Changes by Joel:
* Split EDMA xbar support out of original EDMA DT parsing patch
to keep it easier for review.
* Rewrite shift and offset calculation.
Suggested-by: Sekhar Nori <nsekhar@ti.com>
Suggested by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[nsekhar@ti.com: fix checkpatch errors and a minor coding improvement]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Adds support for parsing the TI EDMA DT data into the required EDMA
private API platform data. Enables runtime PM support to initialize
the EDMA hwmod. Enables build on OMAP.
Changes by Joel:
* Setup default one-to-one mapping for queue_priority and queue_tc
mapping as discussed in [1].
* Split out xbar stuff to separate patch. [1]
* Dropped unused DT helper to convert to array
* Fixed dangling pointer issue with Sekhar's changes
[1] https://patchwork.kernel.org/patch/2226761/
Signed-off-by: Matt Porter <mporter@ti.com>
[nsekhar@ti.com: fix checkpatch errors, build breakages. Introduce
edma_setup_info_from_dt() as part of that effort]
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The length of the registers area for the Marvell 370/XP Ethernet controller
was incorrect in the .dtsi: 0x2500, while it should have been 0x4000.
This problem wasn't noticed because there used to be a static mapping for
all the MMIO register region set up by ->map_io().
The register length was fixed in all the other device tree files,
except from the armada-xp-mv78260.dtsi, in the following commit:
commit cf8088c5ca
Author: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Date: Tue May 21 12:33:27 2013 +0200
arm: mvebu: fix length of Ethernet registers area in .dtsi
This commit fixes a kernel panic in mvneta_probe(), when the kernel
tries to access the unmapped registers:
[ 163.639092] mvneta d0070000.ethernet eth0: mac: 6e:3c:4f:87:17:2e
[ 163.646962] mvneta d0074000.ethernet eth1: mac: 6a:04:4e:6f:f5:ef
[ 163.654853] mvneta d0030000.ethernet eth2: mac: 2a:99:19:19:fc:4c
[ 163.661258] Unable to handle kernel paging request at virtual address f011bcf0
[ 163.668523] pgd = c0004000
[ 163.671237] [f011bcf0] *pgd=2f006811, *pte=00000000, *ppte=00000000
[ 163.677565] Internal error: Oops: 807 [#1] SMP ARM
[ 163.682370] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc6-01850-gba0682e #11
[ 163.690046] task: ef04c000 ti: ef03e000 task.ti: ef03e000
[ 163.695467] PC is at mvneta_probe+0x34c/0xabc
[...]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
It just includes <asm-generic/dma-mapping-broken.h>, which is already
handled by <linux/dma-mapping.h> for the !CONFIG_HAS_DMA case (score sets
CONFIG_NO_DMA=y).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
crypto/xor.c:25:21: error: asm/xor.h: No such file or directory
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jonas Bonn <jonas@southpole.se>
On Ubuntu, where /bin/sh -> dash, "make ARCH=h8300 clean" gives:
printf: 1: $[0x00400000+0x00140000]: expected numeric value
Replace the bash-specific "$[...]" by POSIX "$((..))" for arithmetic
expansion to fix this.
Note that according to the bash 4.1 manpage, "$[...]" is deprecated, and
will be removed in upcoming versions of bash.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
arch/h8300/include/asm/io.h supports only H83007 (H8/3006,3007), H83068
(H8/3065,3066,3067,3068,3069), and H8S2678 (H8S/2670,2673,2674R,2675,2676)
CPU types.
Hence disable H83002 (H8/3001,3002,3003) and H83048
(H8/3044,3045,3046,3047,3048,3052) CPU support at the Kconfig level.
This fixes build failures in allmodconfig/allyesconfig builds, as these
always choose the first CPU type (H83002), which was unsupported:
arch/h8300/include/asm/io.h:13:2: error: #error UNKNOWN CPU TYPE
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
arch/h8300/kernel/timer/itu.c and arch/h8300/kernel/timer/tpu.c
only support 0--4 for CONFIG_H8300_ITU_CH resp. H8300_TPU_CH, hence limit
them to that range in Kconfig.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Ten years ago, a mismerge happened, concatenating two slightly different
versions of the same file. As a consequence, <asm-generic/tlb.h> was never
included, leading to a build failure only now:
kernel/cpu/idle.c: In function 'cpu_idle_loop':
kernel/cpu/idle.c:70:4: error: implicit declaration of function 'check_pgt_cache' [-Werror=implicit-function-declaration]
Remove the duplicates, and the header comment with the no longer correct
file name.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Commit e1b5bb6d12 ("consolidate cond_syscall
and SYSCALL_ALIAS declarations") broke the h8300 build because it removed
the duplicate SYMBOL_NAME() macro from arch/h8300/include/asm/linkage.h,
and all the h8300 asm files include <asm/linkage.h> instead of
<linux/linkage.h>:
arch/h8300/kernel/entry.S: Assembler messages:
arch/h8300/kernel/entry.S:158: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/kernel/syscalls.S: Assembler messages:
arch/h8300/kernel/syscalls.S:6: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/abs.S: Assembler messages:
arch/h8300/lib/abs.S:12: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/memcpy.S: Assembler messages:
arch/h8300/lib/memcpy.S:13: Error: junk at end of line, first unrecognized character is `('
...
arch/h8300/lib/memset.S: Assembler messages:
arch/h8300/lib/memset.S:13: Error: junk at end of line, first unrecognized character is `('
...
Commit 126de6b20b ("linkage.h: fix build
breakage due to symbol prefix handling") broke it even more, by removing
SYMBOL_NAME() and replacing it by __SYMBOL_NAME().
Commit f8ce1faf55 ("Merge tag
'modules-next-for-linus' of
git://git.kernel.org/pub/scm/linuxkernel/git/rusty/linux")
also removed __SYMBOL_NAME(), hidden in a merge conflict resolution.
Hence, replace the use of SYMBOL_NAME() and SYMBOL_NAME_LABEL() in h8300
assembler sources by hardcoding the underscore symbol prefix, like other
architectures (blackfin/metag) do.
This allows to kill SYMBOL_NAME_LABEL(). Now <asm/linkage.h> becomes empty,
and h8300 can be switched to asm-generic/linkage.h.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
This patch has been invaluable in my adventures finding
issues in the perf NMI handler. I'm as big a fan of
printk() as anybody is, but using printk() in NMIs is
deadly when they're happening frequently.
Even hacking in trace_printk() ended up eating enough
CPU to throw off some of the measurements I was making.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch keeps track of how long perf's NMI handler is taking,
and also calculates how many samples perf can take a second. If
the sample length times the expected max number of samples
exceeds a configurable threshold, it drops the sample rate.
This way, we don't have a runaway sampling process eating up the
CPU.
This patch can tend to drop the sample rate down to level where
perf doesn't work very well. *BUT* the alternative is that my
system hangs because it spends all of its time handling NMIs.
I'll take a busted performance tool over an entire system that's
busted and undebuggable any day.
BTW, my suspicion is that there's still an underlying bug here.
Using the HPET instead of the TSC is definitely a contributing
factor, but I suspect there are some other things going on.
But, I can't go dig down on a bug like that with my machine
hanging all the time.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
[ Prettified it a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I have a system which is causing all kinds of problems. It has
8 NUMA nodes, and lots of cores that can fight over cachelines.
If things are not working _perfectly_, then NMIs can take longer
than expected.
If we get too many of them backed up to each other, we can
easily end up in a situation where we are doing nothing *but*
running NMIs. The biggest problem, though, is that this happens
_silently_. You might be lucky to get an hrtimer warning, but
most of the time system simply hangs.
This patch should at least give us some warning before we fall
off the cliff. the warnings look like this:
nmi_handle: perf_event_nmi_handler() took: 26095071 ns
The message is triggered whenever we notice the longest NMI
we've seen to date. You can always view and reset this value
via the debugfs interface if you like.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Cc: Dave Hansen <dave@sr71.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case CONFIG_X86_MCE_THRESHOLD and CONFIG_X86_THERMAL_VECTOR
are disabled, kernel build fails as follows.
arch/x86/built-in.o: In function `trace_threshold_interrupt':
(.entry.text+0x122b): undefined reference to `smp_trace_threshold_interrupt'
arch/x86/built-in.o: In function `trace_thermal_interrupt':
(.entry.text+0x132b): undefined reference to `smp_trace_thermal_interrupt'
In this case, trace_threshold_interrupt/trace_thermal_interrupt
are not needed to define.
So, add config option checking to their definitions in entry_64.S.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/51C58B8A.2080808@hds.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
These are two fixes that came in this week, one for a regression we
introduced in 3.10 in the GIC interrupt code, and the other one
fixes a typo in newly introduced code.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIVAwUAUcR9uWCrR//JCVInAQJPOQ/7BQfqxNbQn+DkHK3I3HBYDzFgaVr4Up9N
JXgQnjrSjdGL0B0IaBaCTx95wv7DW9vsQk0sz6Hb38OFYpI5vn/77am35AEAmOtX
0OpFsTWM6iPiJMW0js4xWtDMDICNaFpnUWHMmO3dKMQJztvyHnzhsoWfWqlIZImV
ml2HLeCYnFfM6vYUwTV5AHyCXMa4n7ODyIMouptCPlzIdPyTROUCBbP3obREW3AO
RTnoOXsZnPkIrAySPtuCflGaUCKQzorvHQiQd+ye3KBbpgwwMHyl8SDKZws6Aes1
f4P539YnuIrm7Sh418MOsKx7/Vo4c+8GxONKSX4fduX6bSlkAba7zBQUcS2FGF8C
RzVeF4lfBCv3F/QcnDWzI0qMvbUgvYXbMH9HUv5BiNed412oUXAaPbZ7/3TpLSq+
nsip8SY+HTo10e+k2dunBgSYk6EyP6aGoNEgS3STOlO5PAQVoy7urK7CjwLUmBrM
IYaX/lmNWJjoWqMJtLYBVvr/n59420WO2VkmBh6OM/jKVE/ZO323AsIorGmlNmoY
p2jtQ2q/x7rJ7PVlDgqUf18siiqyada4RwmvapmZkQwbMYppX4GPbF0KjylQO+g5
9EH1xH9NK5GOr6JxqyMoDyl0EPOtfveie0xKPhnNVxmi6cgnmlu04HymYO9V5c7K
1A47eYCn1pc=
=+4ED
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are two fixes that came in this week, one for a regression we
introduced in 3.10 in the GIC interrupt code, and the other one fixes
a typo in newly introduced code"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
irqchip: gic: call gic_cpu_init() as well in CPU_STARTING_FROZEN case
ARM: dts: Correct the base address of pinctrl_3 on Exynos5250
Pull vfs fixes from Al Viro:
"Several fixes for bugs caught while looking through f_pos (ab)users"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
aout32 coredump compat fix
splice: don't pass the address of ->f_pos to methods
mconsole: we'd better initialize pos before passing it to vfs_read()...
As load_current_idt() is now what is used to update the IDT for the
switches needed for NMI, lockdep debug, and for tracing, it must not
call local_irq_save(). This is because one of the users of this is
lockdep, which does tracing of local_irq_save() and when the debug
trap is hit, we need to update the IDT before tracing interrupts
being disabled. As load_current_idt() is used to do this, calling
local_irq_save() which lockdep traces, defeats the point of calling
load_current_idt().
As interrupts are already disabled when used by lockdep and NMI, the
only other user is tracing that can disable interrupts itself. Simply
have the tracing update disable interrupts before calling load_current_idt()
instead of breaking the other users.
Here's the dump that happened:
------------[ cut here ]------------
WARNING: at /work/autotest/nobackup/linux-test.git/kernel/fork.c:1196 copy_process+0x2c3/0x1398()
DEBUG_LOCKS_WARN_ON(!p->hardirqs_enabled)
Modules linked in:
CPU: 1 PID: 4570 Comm: gdm-simple-gree Not tainted 3.10.0-rc3-test+ #5
Hardware name: /DG965MQ, BIOS MQ96510J.86A.0372.2006.0605.1717 06/05/2006
ffffffff81d2a7a5 ffff88006ed13d50 ffffffff8192822b ffff88006ed13d90
ffffffff81035f25 ffff8800721c6000 ffff88006ed13da0 0000000001200011
0000000000000000 ffff88006ed5e000 ffff8800721c6000 ffff88006ed13df0
Call Trace:
[<ffffffff8192822b>] dump_stack+0x19/0x1b
[<ffffffff81035f25>] warn_slowpath_common+0x67/0x80
[<ffffffff81035fe1>] warn_slowpath_fmt+0x46/0x48
[<ffffffff812bfc5d>] ? __raw_spin_lock_init+0x31/0x52
[<ffffffff810341f7>] copy_process+0x2c3/0x1398
[<ffffffff8103539d>] do_fork+0xa8/0x260
[<ffffffff810ca7b1>] ? trace_preempt_on+0x2a/0x2f
[<ffffffff812afb3e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<ffffffff81937fe7>] ? sysret_check+0x1b/0x56
[<ffffffff81937fe7>] ? sysret_check+0x1b/0x56
[<ffffffff810355cf>] SyS_clone+0x16/0x18
[<ffffffff81938369>] stub_clone+0x69/0x90
[<ffffffff81937fc2>] ? system_call_fastpath+0x16/0x1b
---[ end trace 8b157a9d20ca1aa2 ]---
in fork.c:
#ifdef CONFIG_PROVE_LOCKING
DEBUG_LOCKS_WARN_ON(!p->hardirqs_enabled); <-- bug here
DEBUG_LOCKS_WARN_ON(!p->softirqs_enabled);
#endif
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Historically, pt_regs have had orig_r8, an overloaded container for
(1) backup copy of r8 (syscall number Trap Exceptions)
(2) additional system state: (syscall/Exception/Interrupt)
There is no point in keeping (1) since syscall number is never clobbered
in-place, in pt_regs, unlike r0 which duals as first syscall arg as well
as syscall return value and in case of syscall restart, the orig arg0
needs restoring (from orig_r0) after having been updated in-place with
syscall ret value.
This further paves way to convert (2) to contain ECR itself (rather than
current madeup values)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
(This is a VERY IMP change for low level interrupt/exception handling)
-----------------------------------------------------------------------
WHAT
-----------------------------------------------------------------------
* User 25 now saved in pt_regs->user_r25 (vs. tsk->thread_info.user_r25)
* This allows Low level interrupt code to unconditionally save r25
(vs. the prev version which would only do it for U->K transition).
Ofcourse for nested interrupts, only the pt_regs->user_r25 of
bottom-most frame is useful.
* simplifies the interrupt prologue/epilogue
* Needed for ARCv2 ISA code and done here to keep design similar with
ARCompact event handling
-----------------------------------------------------------------------
WHY
-------------------------------------------------------------------------
With CONFIG_ARC_CURR_IN_REG, r25 is used to cache "current" task pointer
in kernel mode. So when entering kernel mode from User Mode
- user r25 is specially safe-kept (it being a callee reg is NOT part of
pt_regs which are saved by default on each interrupt/trap/exception)
- r25 loaded with current task pointer.
Further, if interrupt was taken in kernel mode, this is skipped since we
know that r25 already has valid "current" pointer.
With 2 level of interrupts in ARCompact ISA, detecting this is difficult
but still possible, since we could be in kernel mode but r25 not already saved
(in fact the stack itself might not have been switched).
A. User mode
B. L1 IRQ taken
C. L2 IRQ taken (while on 1st line of L1 ISR)
So in #C, although in kernel mode, r25 not saved (infact SP not
switched at all)
Given that ARcompact has manual stack switching, we could use a bit of
trickey - The low level code would make sure that SP is only set to kernel
mode value at the very end (after saving r25). So a non kernel mode SP,
even if in kernel mode, meant r25 was NOT saved.
The same paradigm won't work in ARCv2 ISA since SP is auto-switched so
it's setting can't be delayed/constrained.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This paves way for further simplifications.
There's an overhead of 1 insn for the non-common case of interrupt taken
from kernel mode.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* use artificial PUSH/POP contructs for CORE Reg save/restore to stack
* use artificial PUSHAX/POPAX contructs for Auxiliary Space regs
* macro'ize multiple copies of callee-reg-save/restore (SAVE_R13_TO_R24)
* use BIC insn for inverse-and operation
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This is trickier than prev two:
* context switching code saves kernel mode callee regs in the format of
struct callee_regs thus needs adjustment. This also reduces the height
of topmost kernel stack frame by 1 word.
* Since kernel stack unwinder is sensitive to height of topmost kernel
stack frame, that needs a word of adjustment too.
ptrace needs a bit of updating since pt_regs now diverges from
user_regs_struct.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Historically, pt_regs would end at offset of 1 word from end of stack
page.
----------------- -> START of page (task->stack)
| |
| thread_info |
-----------------
| |
^ ~ ~
| ~ ~
| | |
| | | <---- pt_regs used to END here
-----------------
| 1 word GUTTER |
----------------- -> End of page (START of kernel stack)
This required special "one-off" considerations in low level code.
The root cause is very likely assumption of "empty" SP by the original
ARC kernel hackers, despite ARC700 always been "full" SP.
So finally RIP one word gutter !
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This can be ascertained within do_page_fault() since it gets the full
ECR (Exception Cause Register).
Further, for both the callers of do_page_fault(): Prot-V / D-TLB-Miss,
the cause sub-fields in ECR are same for same type of access, making the
code much more simpler.
D-TLB-Miss [LD] 0x00_21_01_00
Prot-V [LD] 0x00_23_01_00
^^
D-TLB-Miss [ST] 0x00_21_02_00
Prot-V [ST] 0x00_23_02_00
^^
D-TLB-Miss [EX] 0x00_21_03_00
Prot-V [EX] 0x00_23_03_00
^^
This helps code consolidation, which is even better when moving code from
assembler to "C".
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
1. For VM_EXEC based delayed dcache/icache flush, reduces the number of
flushes.
2. Makes this security feature ON by default rather than OFF before.
3. Applications can use mprotect() to selectively override this.
4. ELF binaries have a GNU_STACK segment which can easily override the
kernel default permissions.
For nested-functions/trampolines, gcc already auto-enables executable
stack in elf. Others needing this can use -Wl,-z,execstack option.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Non-congruent SRC page in copy_user_page() is dcache clean in the end -
so record that fact, to avoid a subsequent extraneous flush.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* Number of (i|d)cache ways can be retrieved from BCRs and hence no need
to cross check with with built-in constants
* Use of IS_ENABLED() to check for a Kconfig option
* is_not_cache_aligned() not used anymore
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
* Move the various sub-system defines/types into relevant files/functions
(reduces compilation time)
* move CPU specific stuff out of asm/tlb.h into asm/mmu.h
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This fixes the following:
- CONFIG_ARC_SERIAL_BAUD is only defined when CONFIG_SERIAL_ARC is defined.
Make sure that it isn't referenced otherwise.
- There is no use for initializing arc_uart_info[] when CONFIG_SERIAL_ARC is
not defined.
[vgupta: tweaked changelog title, used IS_ENABLED() kconfig helper]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
dump_seek() does SEEK_CUR, not SEEK_SET; native binfmt_aout
handles it correctly (seeks by PAGE_SIZE - sizeof(struct user),
getting the current position to PAGE_SIZE), compat one seeks
by PAGE_SIZE and ends up at PAGE_SIZE + already written...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This patch adds support for the TI-Nspire platform.
Changes between v1 and v2:
* Added GENERIC_IRQ_CHIP to platform Kconfig
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds device trees for describing the TI-Nspire hardware.
Changes between v1 and v2:
* Change "keymap" binding to the standard "linux,keymap" binding.
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This series removes the hardcoded register base address for mvebu.
For round 2:
- multiplatform
- fix booting on anything other than mvebu
Depends (none new for round 2):
- mvebu/fixes-non-critical (up to tags/fixes-non-3.11-1)
- mvebu/cleanup (up to tags/cleanup-3.11-3)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.20 (GNU/Linux)
iQEcBAABAgAGBQJRxICoAAoJEAi3KVZQDZAeOK8H/0k4YVpRqGlOvJ4iyeO0YTx/
n0Mz+piw6Ra5U+EiaAZ0sDNO9eceDj88mZza0xEm2bfYCy2Lr2UA0TDCG/3V2WPM
ye8Avr9PyCVAGgS9SuNH9oBIxFa5nVOsPje/qsZDEKsU9LrbjCXBudtRTyiH+E8K
rfLi822eXS1Ckh2rpYL0XxIho2630vduAZpCecaRvvjXFqWRBfoR3N9k2LOgJC3l
SSmBQs7H+C7QYh1iZwemMixh2W+Ck0qiGttfIrEYeKuWpo9+5hyLvvqLZVpjA67D
kyYnyJ/OPMP4W4DoATtiGgKsCTj3IMPiC/yMCgFMocl5gUXuLqf//d3g2Uc/3UY=
=SY7t
-----END PGP SIGNATURE-----
Merge tag 'regmap-3.11-2' of git://git.infradead.org/users/jcooper/linux into next/soc
From Jason Cooper:
mvebu register map changes for v3.11 (round 2)
This series removes the hardcoded register base address for mvebu.
For round 2:
- multiplatform
- fix booting on anything other than mvebu
Depends (none new for round 2):
- mvebu/fixes-non-critical (up to tags/fixes-non-3.11-1)
- mvebu/cleanup (up to tags/cleanup-3.11-3)
* tag 'regmap-3.11-2' of git://git.infradead.org/users/jcooper/linux:
arm: mvebu: fix coherency_late_init() for multiplatform
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull x86 fixes from Peter Anvin:
"This series fixes a couple of build failures, and fixes MTRR cleanup
and memory setup on very specific memory maps.
Finally, it fixes triggering backtraces on all CPUs, which was
inadvertently disabled on x86."
* 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Fix dummy variable buffer allocation
x86: Fix trigger_all_cpu_backtrace() implementation
x86: Fix section mismatch on load_ucode_ap
x86: fix build error and kconfig for ia32_emulation and binfmt
range: Do not add new blank slot with add_range_with_merge
x86, mtrr: Fix original mtrr range get for mtrr_cleanup
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQIcBAABAgAGBQJRwc4AAAoJEBvWZb6bTYbyT/wQAIAvvjM+jlqOsZCUjnutdWXf
VGvJB1jXPEa6cuUkaE3RYO8rLLJz/PC4Geg8I/awtjeSkPvldeu0FihSkdbrNkpJ
3dSAJ0cR8+ScUZB74Lt1pfwwEAdZk61MU1opD1qy3wWTy5Rk2xp4qzE2aCVJoLkh
K8gscLrCHR47DELcm+AWCtHt/0VOZSAVe9z/7Qf9eAMCNmH/efHgrZZTxF/1aBkI
7XaZdqT+d84D/Bc2isdRNvFYt9rkuII2GCeRciw2t3QsgVoBXn7FVK2OXbufIaYW
/XX0YiNpSnUpcpOtGw2MwzpKgDSRE9QbnOUVsWThTDeG7Q5d72ioCFuRDba8p3Lc
u146nQM495bAdJQz6IW3JCeiZlQ86/QjFquk9hJuCwQpuHmlRpVEqFbLVnZEnYvk
lc9dnK7BcaftbMgo/j6DMv6Bpq/EDp1JrPXzNT4BwG7ptArEXzmdoktwpONjrZzI
1oZV5xCcNhTjyqlndiZKxneKXoqz/3NOdR+EV0yh3+0l4PK6C52jd6PaKRv7qN3l
Lt35uFrmKqzOR12KVStYREyh1Sy43ADE4tIIPnOBbcXz23Df4/vVSb1Bqv0nPq4i
JhsRsGoR8ZdDBd7c40XlvpxOiMmubFLSklX0WaKn2yIZH9FMj63Ak0wet7qhaqb8
lbJRUH8gnK0RCVEoUFpB
=yGPS
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Three one-line fixes for my first pull request; one for x86 host, one
for x86 guest, one for PPC"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86: kvmclock: zero initialize pvclock shared memory area
kvm/ppc/booke: Delay kvmppc_lazy_ee_enable
KVM: x86: remove vcpu's CPL check in host-invoked XCR set
Pull crypto fix from Herbert Xu:
"This fixes an unaligned crash in XTS mode when using aseni_intel"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: aesni_intel - fix accessing of unaligned memory
Although the internal register window size is 1 MiB, the previous
ranges translation for the internal register space had a size of
0x4000000. This was done to allow the crypto and nand node to access
the corresponding 'sram' and 'nand' decoding windows.
In order to describe the hardware more accurately, we declare the
real 1 MiB internal register space in the ranges, and add a translation
entry for the nand node to access the 'nand' window.
This commit will make future improvements on the MBus DT binding easier.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The following commit:
commit 7e348b9012
Author: Robert Lee <rob.lee@linaro.org>
Date: Tue Mar 20 15:22:43 2012 -0500
ARM: at91: Consolidate time keeping and irq enable
Enable core cpuidle timekeeping and irq enabling and remove that
handling from this code.
introduced an additional zero to the state1 (suspend) target residency.
With a periodic tick, the cpu never enters the state1 with both 10000 and
100000.
With a tickless system, it enters to state1 much more often with the
initial value, roughly x7 more.
Fix it by setting the value to 10ms again.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
[nicola.ferre@atmel.com: add precisions given by Daniel to commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Since 4b68520dc0ec96153bc0d87bca5ffba508edfcf
ARM: at91: add AIC5 support
we allocate the at91_extern_irq.
This patch makes it static and stores the non-dt extern irq in the soc
structure. It is then possible to use a at91_get_extern_irq() function
to get the value for outside of the irq driver. It is useful for passing
its value to at91_aic_init().
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[nicolas.ferre@atmel.com: rework commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Compiling without CONFIG_X86_LOCAL_APIC set, apic.c will not be
compiled, and the irq tracepoints will not be created via the
CREATE_TRACE_POINTS macro. When CONFIG_X86_LOCAL_APIC is not set,
we get the following build error:
LD init/built-in.o
arch/x86/built-in.o: In function `trace_x86_platform_ipi_entry':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_entry'
arch/x86/built-in.o: In function `trace_x86_platform_ipi_exit':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:66: undefined reference to `__tracepoint_x86_platform_ipi_exit'
arch/x86/built-in.o: In function `trace_irq_work_entry':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_entry'
arch/x86/built-in.o: In function `trace_irq_work_exit':
linux-test.git/arch/x86/include/asm/trace/irq_vectors.h:72: undefined reference to `__tracepoint_irq_work_exit'
arch/x86/built-in.o:(__jump_table+0x8): undefined reference to `__tracepoint_x86_platform_ipi_entry'
arch/x86/built-in.o:(__jump_table+0x14): undefined reference to `__tracepoint_x86_platform_ipi_exit'
arch/x86/built-in.o:(__jump_table+0x20): undefined reference to `__tracepoint_irq_work_entry'
arch/x86/built-in.o:(__jump_table+0x2c): undefined reference to `__tracepoint_irq_work_exit'
make[1]: *** [vmlinux] Error 1
make: *** [sub-make] Error 2
As irq.c is always compiled for x86, it is a more appropriate location
to create the irq tracepoints.
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
From Christian Daudt:
* 'armsoc/for-3.11/cleanups' of git://github.com/broadcom/bcm11351:
ARM: bcm281xx: Remove init_irq declaration in machine description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From Christian Daudt:
* 'armsoc/for-3.11/dt' of git://github.com/broadcom/bcm11351:
ARM: dts: bcm281xx: change comment to C89 style
ARM: mmc: bcm281xx SDHCI driver (dt mods)
ARM: dts: bcm281xx: use existing defines for irqs
ARM: dts: bcm281xx: use #include for device tree files
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Increased DT coverage for renesas-intc-irqpin
by Guennadi Liakhovetski
* Clean up of address format used in sh73a0 dtsi file
by Guennadi Liakhovetski
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=cg7n
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
From Simon Horman:
Second Round of Renesas ARM-based SoC DT updates for v3.11
* Increased DT coverage for renesas-intc-irqpin
by Guennadi Liakhovetski
* Clean up of address format used in sh73a0 dtsi file
by Guennadi Liakhovetski
* tag 'renesas-dt2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: irqpin: add a DT property to enable masking on parent
ARM: shmobile: sh73a0: remove "0x" prefix from DT node names
irqchip: renesas-intc-irqpin: DT binding for sense bitfield width
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Extended hardware coverage for the Bock-W board
by Goda-san and Morimoto-san
* Correction to Ether device name for the Bock-W board
from Sergei Shtylyov
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=93dZ
-----END PGP SIGNATURE-----
Merge tag 'renesas-boards2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
From Simon Horman:
Second Round of Renesas ARM-based SoC board updates for v3.11
* Extended hardware coverage for the Bock-W board
by Goda-san and Morimoto-san
* Correction to Ether device name for the Bock-W board
from Sergei Shtylyov
* tag 'renesas-boards2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: BOCK-W: change Ether device name
ARM: shmobile: bockw: add MMCIF support
ARM: shmobile: bockw: add SPI FLASH support
ARM: shmobile: bockw: add I2C device support
ARM: shmobile: BOCK-W: add Ether support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- add support for exynos5420 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=l2mp
-----END PGP SIGNATURE-----
Merge tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/late
From Kukjin Kim:
based on tags/common-clk-audio
- add support for exynos5420 SoC
* tag 'soc-exynos5420-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: extend soft-reset support for EXYNOS5420
ARM: EXYNOS: add secondary CPU boot base location for EXYNOS5420
clocksource: exynos_mct: use (request/free)_irq calls for local timer registration
ARM: dts: Add initial device tree support for EXYNOS5420
clk: exynos5420: register clocks using common clock framework
ARM: EXYNOS: use four additional chipid bits to identify EXYNOS family
serial: samsung: select EXYNOS specific driver data if ARCH_EXYNOS is defined
ARM: EXYNOS: Add support for EXYNOS5420 SoC
ARM: dts: list the CPU nodes for EXYNOS5250
ARM: dts: fork out common EXYNOS5 nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Work by Magnus Damm and others to clean up the boot of and move
things closer to supporting multi-arch.
As a side effect of this work it was decided to remove support for
two boards, Bonito and AP4EVB. Those patches are included in this
series as they depend on earlier patches in the series.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQIcBAABAgAGBQJRvsCNAAoJENfPZGlqN0++JDAP/ROJOKamUa2/b34ebTVq53Os
4u9twxIGRQ/HJzpFZSV4ak/M9G4sl19+V8s46qaKnCwoKlc7GZW/qNqIEgN9cDrz
ht9mbcJ8BTtinUo1nxzIFMOWB0WltSvmlxNeKm6OxG+BXu/lJ6BoPrhoO/qc49kc
eHYAHdVDYIlr+kMlAw8HIbpJqsMiQviq8b8S8aqoW1QSHHlTgL2GNoQH/tli/r8m
XNei4RrTABUq1r04oOBN+0FQKyn5lWgq5hMtdWsP8VvhaW6kwX3Hwl7f+dn/xDna
XB6J3z+/jFTs6aR0Njm8LlJv2Q4SFJE595z/6j9upWS+e7pG+et+SMVSwPCeKzr2
pcCfFpce9e8KIPVUdKlZqMw1BMO/ok1BnpTtdBuAZW2zriW0EeUe0SgFk8GzHC3E
p+JqgeEcbN0lO6WKJ9YfPH6WSt8JUYDse3ldxBlf3pGezaV8G/hccZFnOc0BHXV+
5cTGeJpFEdFcNWvxKvJytehQLTl05KvGyE52AnDLrjq1aIVflYUzTlccm14PpSAC
kTNqEpUd3qIcINi6Udt5WPRIMj6gIXl6zLAkqxufcIhYW86E2DejnWcxo5UbLXyH
30K0BbY90oVc2hJKu32HBu11kI6RlIa9qjBHYI8WAZ+uGplHqD2WaBmXojFElrbH
JVDkg2BtreVa5q4Xot0L
=1+Oa
-----END PGP SIGNATURE-----
Merge tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
From Simon Horman:
Renesas ARM based SoC boot cleanup for v3.11
Work by Magnus Damm and others to clean up the boot of and move
things closer to supporting multi-arch.
As a side effect of this work it was decided to remove support for
two boards, Bonito and AP4EVB. Those patches are included in this
series as they depend on earlier patches in the series.
* tag 'renesas-cleanup-boot-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove Bonito board support
ARM: shmobile: Remove AP4EVB board support
ARM: shmobile: Remove mach/memory.h
ARM: shmobile: Remove MEMORY_START/SIZE
ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT
ARM: shmobile: Remove old SCU boot code
ARM: shmobile: EMEV2 SMP with SCU boot fn and args
ARM: shmobile: sh73a0 SMP with SCU boot fn and args
ARM: shmobile: r8a7779 SMP with SCU boot fn and args
ARM: shmobile: Add SCU boot function using argument
ARM: shmobile: Add SMP boot function and argument
ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
ARM: shmobile: Remove romImage CONFIG_MEMORY_START
ARM: shmobile: Let romImage rely on default ATAGS
ARM: shmobile: uImage load address rework
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
__initdata annotations for the r8a7790 SoC by Morimoto-san.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=i7Kv
-----END PGP SIGNATURE-----
Merge tag 'renesas-cleanup-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late
From Simon Horman:
Renesas ARM based SoC cleanups for v3.11
__initdata annotations for the r8a7790 SoC by Morimoto-san.
* tag 'renesas-cleanup-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (158 commits)
ARM: shmobile: r8a7790: add __initdata on resource and device data
Based on 'renesas-pinmux-for-v3.11' and 'renesas-soc-for-v3.11
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Patches from Lee Jones:
This gets rid of mop500_snowball_ethernet_clock_enable() which is no
longer in use. It also straightens out a bug which ensures the SMSC911x's
regulator is turned on at start-up when using Device Tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mop500_snowball_ethernet_clock_enable() provided a means to enable a
clock which was used for the SMSC911x Ethernet device on Snowball. It
was merely a stand-in until the driver was common clk compliant. Now
that it is, this can be removed for both DT and ATAGs booting.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
When this node was added, the AB8500 GPIO driver was pretty broken.
As a hack, we pretended that NOMADIK GPIO 26 was the correct on/off
pin, as it was unused. It worked because AB8500 GPIO 26 was in an
'always on from boot' state. Now the AB8500 GPIO driver is working,
the default state for all the pins is 'off'. Let's flip back over to
use the correct GPIO which is _actually_ attached to the regulator.
We're also taking the opportunity to straighten out some formatting
misdemeanours, swapping spaces for tabs.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Here we're adding a node for the AB8500 GPIO device. This will allow
other DT:ed components to obtain GPIOs for use within their drivers.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
to initiate garbage collection. Also, free the kernel memory when
we're done with it instead of leaking - Ben Hutchings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=kfTf
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent' into x86/urgent
* Don't leak random kernel memory to EFI variable NVRAM when attempting
to initiate garbage collection. Also, free the kernel memory when
we're done with it instead of leaking - Ben Hutchings
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
1. Check for allocation failure
2. Clear the buffer contents, as they may actually be written to flash
3. Don't leak the buffer
Compile-tested only.
[ Tested successfully on my buggy ASUS machine - Matt ]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABCAAGBQJRw/9tAAoJEPOmecmc0R2B3NMH/A609NR5Yag2vftml8Gl+Iya
2k/dligAPxx/WEogXwxrCcEwFvxA3iNvD9M7MuXZ25ffFL6SgYLnxNYCU53rXRmE
UBQP3OTW/5FyR3N/JGCLW4G8f6LoNWGtOaZqpMC97J4ucnWV/DtbEpoO7qlET/p0
zUsqIpFc9RGroRAmDuRRKpOuArBX5N9utH4fvpZ1XiXztIaESdCiGDFx4AN5g7Iq
uujcKK1NOoj4X/LXj0j4A1ECAhpJ5W8exacdwZZnKVVwA1CpEFxQLu9ekvCYYMNC
6LWhp2/ptgRj7Tv5uVqbHJn4jKd/OM+X0Rn6HcMY1Dwhf37Oa2wPEuQ2qMzcE6A=
=4BBI
-----END PGP SIGNATURE-----
Merge tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/soc
From Heiko Stuebner:
Adds basic support for Rockchip Cortex-A9 SoCs.
* tag 'v3.11-rockchip-basics' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm: add basic support for Rockchip RK3066a boards
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: Add basic clocks for Rockchip rk3066a SoCs
clocksource: dw_apb_timer_of: use clocksource_of_init
clocksource: dw_apb_timer_of: select DW_APB_TIMER
clocksource: dw_apb_timer_of: add clock-handling
clocksource: dw_apb_timer_of: enable the use the clocksource as sched clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds a generic devicetree board file and a dtsi for boards
based on the RK3066a SoCs from Rockchip.
Apart from the generic parts (gic, clocks, pinctrl) the only components
currently supported are the timers, uarts and mmc ports (all DesignWare-
based).
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Olof Johansson <olof@lixom.net>
Uarts on all recent Rockchip SoCs are Synopsis DesignWare 8250 types.
Only their addresses vary very much.
This patch adds the necessary definitions to use any of the uart ports
for early debug purposes.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This adds a basic clock setup for rk3066a SoCs. Only the gates are
set up currently, as the mux and dividers should use the upcoming
generic devicetree bindings.
Clocks whose rates need to be known are supplied by fixed-rate
"dummy"-clocks that provide the correct rate. This is uncritical insofar
that the only bootloader currently in existence for Rockchip devices
is the propietary Rockchip one that always setups the clocks in the
necessary way.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Mike Turquette <mturquette@linaro.org>
Add CONFIG_BLK_DEV_INITRD to the defconfig to support
initramfs and initrd.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
[Purpose of this patch]
As Vaibhav explained in the thread below, tracepoints for irq vectors
are useful.
http://www.spinics.net/lists/mm-commits/msg85707.html
<snip>
The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled. They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.
There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers. Tracing such events gives
us the information about IRQ interaction with other system events.
The trace also tells where the system is spending its time. We want to
know which cores are handling interrupts and how they are affecting other
processes in the system. Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.
<snip>
On the other hand, my usecase is tracing just local timer event and
getting a value of instruction pointer.
I suggested to add an argument local timer event to get instruction pointer before.
But there is another way to get it with external module like systemtap.
So, I don't need to add any argument to irq vector tracepoints now.
[Patch Description]
Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events.
But there is an above use case to trace specific irq_vector rather than tracing all events.
In this case, we are concerned about overhead due to unwanted events.
So, add following tracepoints instead of introducing irq_vector_entry/exit.
so that we can enable them independently.
- local_timer_vector
- reschedule_vector
- call_function_vector
- call_function_single_vector
- irq_work_entry_vector
- error_apic_vector
- thermal_apic_vector
- threshold_apic_vector
- spurious_apic_vector
- x86_platform_ipi_vector
Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty
makes a zero when tracepoints are disabled. Detailed explanations are as follows.
- Create trace irq handlers with entering_irq()/exiting_irq().
- Create a new IDT, trace_idt_table, at boot time by adding a logic to
_set_gate(). It is just a copy of original idt table.
- Register the new handlers for tracpoints to the new IDT by introducing
macros to alloc_intr_gate() called at registering time of irq_vector handlers.
- Add checking, whether irq vector tracing is on/off, into load_current_idt().
This has to be done below debug checking for these reasons.
- Switching to debug IDT may be kicked while tracing is enabled.
- On the other hands, switching to trace IDT is kicked only when debugging
is disabled.
In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being
used for other purposes.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Rename variables for debugging to describe meaning of them precisely.
Also, introduce a generic way to switch IDT by checking a current state,
debug on/off.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C323A8.7050905@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
When implementing tracepoints in interrupt handers, if the tracepoints are
simply added in the performance sensitive path of interrupt handers,
it may cause potential performance problem due to the time penalty.
To solve the problem, an idea is to prepare non-trace/trace irq handers and
switch their IDTs at the enabling/disabling time.
So, let's introduce entering_irq()/exiting_irq() for pre/post-
processing of each irq handler.
A way to use them is as follows.
Non-trace irq handler:
smp_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
exiting_irq(); /* post-processing of this handler */
}
Trace irq_handler:
smp_trace_irq_handler()
{
entering_irq(); /* pre-processing of this handler */
trace_irq_entry(); /* tracepoint for irq entry */
__smp_irq_handler(); /*
* common logic between non-trace and trace handlers
* in a vector.
*/
trace_irq_exit(); /* tracepoint for irq exit */
exiting_irq(); /* post-processing of this handler */
}
If tracepoints can place outside entering_irq()/exiting_irq() as follows,
it looks cleaner.
smp_trace_irq_handler()
{
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
}
But it doesn't work.
The problem is with irq_enter/exit() being called. They must be called before
trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before
any tracepoints are used, as tracepoints use rcu to synchronize.
As a possible alternative, we may be able to call irq_enter() first as follows
if irq_enter() can nest.
smp_trace_irq_hander()
{
irq_entry();
trace_irq_entry();
smp_irq_handler();
trace_irq_exit();
irq_exit();
}
But it doesn't work, either.
If irq_enter() is nested, it may have a time penalty because it has to check if it
was already called or not. The time penalty is not desired in performance sensitive
paths even if it is tiny.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
There is no point in using "xorq" to clear a register... use "xorl" to
clear the bottom 32 bits, and the upper 32 bits get cleared by virtue
of zero extension.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/n/tip-b76zi1gep39c0zs8fbvkhie9@git.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRvOHmAAoJEHm+PkMAQRiGpOYIAI/OMDjCMro8S1FjDPGr+wsz
r/u4h4DiHQTdAUSBYhksgXVBSm02hGhDF3tz7u9oAXuv+4zlGUMZNjmEmLOFfdyd
Ve9vqMrUkdwA0jt0d7AYVjtCy/j/yVe5szXZCksHXOZiyb78SEZPQgHc13CJ4lKI
K2jPk0sMko7d5ptALPIX+ome48M+3w3k1HuQ62Znm4pFSADcFGpGdf40HP/5LL+I
Llp3XHJ5OZrcHRal0t39oHJOCWW61bnYXTWel9J7XoUztebF2cRgFydAhtrto42z
x7ELOKVY197WH8l56cnVHrISneQd4kgWrooxLYy6QsJl73/qvQBX+7nmkoes7so=
=qeV0
-----END PGP SIGNATURE-----
Merge tag 'v3.10-rc6' into x86/cleanups
Linux 3.10-rc6
We need a change that is the mainline tree for further work.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The call stack below shows how this happens: basically eager_fpu_init()
calls __thread_fpu_begin(current) which then does if (!use_eager_fpu()),
which, in turn, uses static_cpu_has.
And we're executing before alternatives so static_cpu_has doesn't work
there yet.
Use the safe variant in this path which becomes optimal after
alternatives have run.
WARNING: at arch/x86/kernel/cpu/common.c:1368 warn_pre_alternatives+0x1e/0x20()
You're using static_cpu_has before alternatives have run!
Modules linked in:
Pid: 0, comm: swapper Not tainted 3.9.0-rc8+ #1
Call Trace:
warn_slowpath_common
warn_slowpath_fmt
? fpu_finit
warn_pre_alternatives
eager_fpu_init
fpu_init
cpu_init
trap_init
start_kernel
? repair_env_string
x86_64_start_reservations
x86_64_start_kernel
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-6-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We want to use this in early code where alternatives might not have run
yet and for that case we fall back to the dynamic boot_cpu_has.
For that, force a 5-byte jump since the compiler could be generating
differently sized jumps for each label.
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-5-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
static_cpu_has may be used only after alternatives have run. Before that
it always returns false if constant folding with __builtin_constant_p()
doesn't happen. And you don't want that.
This patch is the result of me debugging an issue where I overzealously
put static_cpu_has in code which executed before alternatives have run
and had to spend some time with scratching head and cursing at the
monitor.
So add a jump to a warning which screams loudly when we use this
function too early. The alternatives patch that check away in
conjunction with patching the rest of the kernel image.
[ hpa: factored this into its own configuration option. If we want to
have an overarching option, it should be an option which selects
other options, not as a group option in the source code. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1370772454-6106-4-git-send-email-bp@alien8.de
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Let mmio spte only use bit62 and bit63 on upper 32 bits, then bit 52 ~ bit 61
can be used for other purposes
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Added some missing validity checks for the operands and fixed the
priority of exceptions for some function codes according to the
"Principles of Operation" document.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LCTL and LCTLG are also privileged instructions, thus there is no need for
treating them separately from the other instructions in priv.c. So this
patch moves these two instructions to priv.c, adds a check for supervisor
state and simplifies the "handle_eb" instruction decoding by merging the
two eb_handlers jump tables from intercept.c and priv.c into one table only.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a guest calls the TPI instruction, the second operand address could
point to an invalid location. In this case the problem should be signaled
to the guest by throwing an access exception.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
DIAGNOSE is a privileged instruction and thus we must make sure that we are
in supervisor mode before taking any other actions.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need more fine-grained control about the point in time when we check
for privileged instructions, since the exceptions that can happen during
an instruction have a well-defined priority. For example, for the PFMF
instruction, the check for PGM_PRIVILEGED_OP must happen after the check
for PGM_OPERATION since the latter has a higher precedence - thus the
check for privileged operation must not be done in kvm_s390_handle_b9()
already.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TPROT is a privileged instruction and thus should generate a privileged
operation exception when the problem state bit is not cleared in the PSW.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Renamed the PGM_PRIVILEGED_OPERATION define to PGM_PRIVILEGED_OP since this
define was way longer than the other PGM_* defines and caused the code often
to exceed the 80 columns limit when not split to multiple lines.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CodingStyle does not allow C99 style comments. Since the
dts files live in the kernel for now, make this compliant.
Signed-off-by: Matt Porter <matt.porter@linaro.org>
Acked-by: Christian Daudt <csd@broadcom.com>
Add SDHCI bindings for the Broadcom 281xx SoCs.
Changes from V2:
- Documentation cleanups
Changes from V1:
- split original patch into 2, one for driver and this one for dt
Signed-off-by: Christian Daudt <csd@broadcom.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
- remove board file for exynos
- remove legacy files which are not used anymore
- decouple ARCH_EXYNOS from PLAT_S5P
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=SHg+
-----END PGP SIGNATURE-----
Merge tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim:
cleanup and removing dead code for only support DT for exynos
- remove board file for exynos
- remove legacy files which are not used anymore
- decouple ARCH_EXYNOS from PLAT_S5P
* tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (35 commits)
ARM: EXYNOS: Remove remaining dead code after non-DT support removal
ARM: EXYNOS: Remove legacy L2X0 initialization
ARM: EXYNOS: Use exynos_init_io() as map_io callback
ARM: EXYNOS: Remove custom init_irq callbacks
ARM: EXYNOS: Remove mach/regs-usb-phy.h header
thermal: exynos: Support both EXYNOS4X12 SoCs
ARM: EXYNOS: Remove unused base addresses from mach/map.h header
ARM: EXYNOS: Remove mach/irqs.h header
ARM: EXYNOS: Select SPARSE_IRQ for Exynos
ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS
ARM: EXYNOS: Remove mach/regs-gpio.h header
ARM: EXYNOS: Remove mach/gpio.h
ARM: EXYNOS: Remove setup-i2c0.c
ARM: EXYNOS: Do not select legacy Kconfig symbols any more
ARM: SAMSUNG: Include most of mach/ headers conditionally
ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P
USB: Check for ARCH_EXYNOS separately
platform: Check for ARCH_EXYNOS separately
ARM: SAMSUNG: Compile legacy IRQ and GPIO PM code only with ATAGS support
ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h header
...
Conflicts:
arch/arm/mach-exynos/Kconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- use #include for all Samsung DT
- add clk for exynos audio subsystem (audss) and i2s
- support audss and i2s for exynos5250
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=0n6B
-----END PGP SIGNATURE-----
Merge tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers
From Kukjin Kim:
based on exynos-dt-2 and s3c24xx-dt-2
- use #include for all Samsung DT
- add clk for exynos audio subsystem (audss) and i2s
- support audss and i2s for exynos5250
* tag 'common-clk-audio' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
clk: exynos5250: Add enum entries for divider clock of i2s1 and i2s2
ARM: dts: Update Samsung I2S documentation
ARM: dts: add clock provider information for i2s controllers in Exynos5250
ARM: dts: add Exynos audio subsystem clock controller node
clk: samsung: register audio subsystem clocks using common clock framework
ARM: dts: use #include for all device trees for Samsung
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- update uart addresses in s3c2416-dt auxdata due to removing S3C2410_PA_UARTX
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=Cuff
-----END PGP SIGNATURE-----
Merge tag 's3c24xx-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
based on tags/s3c24xx-dt-1
- update uart addresses in s3c2416-dt auxdata due to removing S3C2410_PA_UARTX
* tag 's3c24xx-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- enable RTC on exynos5250 snow and Arndale boards
- add support LCD and PWM for exynos4210 Origen board
- update bootargs to support 8GiB for exynos5440 SSDK5440 and SD5v1 boards
- enable spi and add opp level for exynos5440
- add example doc for samsung-pinctrl dt bindings
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=sN6E
-----END PGP SIGNATURE-----
Merge tag 'exynos-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt
From Kukjin Kim:
2nd exynos dt update based on tags/exynos-dt-1
- enable RTC on exynos5250 snow and Arndale boards
- add support LCD and PWM for exynos4210 Origen board
- update bootargs to support 8GiB for exynos5440 SSDK5440 and SD5v1 boards
- enable spi and add opp level for exynos5440
- add example doc for samsung-pinctrl dt bindings
* tag 'exynos-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: Set BUCK7 as always on for Origen board
ARM: dts: Add FIMD node to Origen4210 board
ARM: dts: Add LCD related pinctrl entries for exynos4210
ARM: dts: Add PWM related pinctrl entries for exynos4210
Documentation: Add examples to samsung-pinctrl device tree bindings documentation
ARM: dts: Enable RTC node for exynos5250-snow
ARM: dts: Enable RTC node for Arndale
ARM: dts: Removing pdma for exynos5440
ARM: dts: update bootargs to support 8GiB for SSDK5440 and SD5v1
ARM: dts: Add more opp levels in exynos5440
ARM: dts: Add wm8994 regulator support on smdk5250
ARM: dts: enable spi for EXYNOS5440 SOC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- enable XHCI on exynos5
- enable Pinctrl on exynos4 and exynos5
- calling scu_enable() is only available on Cortex-A9
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oexl
-----END PGP SIGNATURE-----
Merge tag 'exynos-arch-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim:
arch/arm/mach-exynos update
- enable XHCI on exynos5
- enable Pinctrl on exynos4 and exynos5
- calling scu_enable() is only available on Cortex-A9
* tag 'exynos-arch-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: call scu_enable() only in case of cortex-A9 processor
ARM: EXYNOS: Select PINCTRL_EXYNOS for exynos4/5 at chip level
ARM: EXYNOS: Enable XHCI support on exynos5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The OMAP Mailbox driver framework is moved out of arch/arm folder
into drivers/mailbox folder, to re-enable building it and also serve
as a baseline for adapting to the new mailbox driver framework. The
changes mainly contain:
- a minor bug fix and cleanup of mach-specific mailbox code
- remove any header dependencies from plat-omap for multi-platform
support
- represent mailbox device data through platform data/hwmod attrs
- move the omap mailbox code out of plat-omap/mach-omapX to
drivers/mailbox folder
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=j0vK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.11/mailbox-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
From Tony Lindgren:
Move OMAP Mailbox framework to drivers via Suman Anna <s-anna@ti.com>
The OMAP Mailbox driver framework is moved out of arch/arm folder
into drivers/mailbox folder, to re-enable building it and also serve
as a baseline for adapting to the new mailbox driver framework. The
changes mainly contain:
- a minor bug fix and cleanup of mach-specific mailbox code
- remove any header dependencies from plat-omap for multi-platform
support
- represent mailbox device data through platform data/hwmod attrs
- move the omap mailbox code out of plat-omap/mach-omapX to
drivers/mailbox folder
* tag 'omap-for-v3.11/mailbox-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
mailbox/omap: move the OMAP mailbox framework to drivers
ARM: OMAP2+: add user and fifo info to mailbox platform data
ARM: OMAP2+: mbox: remove dependencies with soc.h
omap: mailbox: correct the argument type for irq ops
omap: mailbox: call request_irq after mbox queues are allocated
omap: mailbox: check iomem resource before dereferencing it
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
omap-for-v3.11/gpmc-signed branch because of a compile error
it caused. The compile error is fixed in this version.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=IxbH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.11/gpmc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
From Tony Lindgren:
GPMC suspend patch that was left out of the earlier
omap-for-v3.11/gpmc-signed branch because of a compile error
it caused. The compile error is fixed in this version.
* tag 'omap-for-v3.11/gpmc-part2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: gpmc: Low power transition support
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
tapering down finally as we're getting closer to making
omap2+ DT only.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=5gWz
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/boards
From Tony Lindgren:
Minor board changes for v3.11 merge window. These are
tapering down finally as we're getting closer to making
omap2+ DT only.
* tag 'omap-for-v3.11/board-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable USB_PHY and NOP_USB_XCEIV
ARM: OMAP1: nokia770: enable Tahvo
ARM: OMAP3EVM: Marking omap3_evm_display_init() with CONFIG_BROKEN
arm: omap: board-overo: reset GPIO for SMSC911x
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A recent cleanup caused build errors in some configurations
because the header defining NR_IRQS_LEGACY is not included
here. Since that value is the default, we can just as well
leave it out.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Pull scheduler fixes from Ingo Molnar:
"Two smaller fixes - plus a context tracking tracing fix that is a bit
bigger"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/context-tracking: Add preempt_schedule_context() for tracing
sched: Fix clear NOHZ_BALANCE_KICK
sched/x86: Construct all sibling maps if smt
Pull perf fixes from Ingo Molnar:
"Four fixes. The mmap ones are unfortunately larger than desired -
fuzzing uncovered bugs that needed perf context life time management
changes to fix properly"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix broken PEBS-LL support on SNB-EP/IVB-EP
perf: Fix mmap() accounting hole
perf: Fix perf mmap bugs
kprobes: Fix to free gone and unused optprobes
Pull cpu idle fixes from Thomas Gleixner:
- Add a missing irq enable. Fallout of the idle conversion
- Fix stackprotector wreckage caused by the idle conversion
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
idle: Enable interrupts in the weak arch_cpu_idle() implementation
idle: Add the stack canary init to cpu_startup_entry()
Pull powerpc fix fro, Benjamin Herrenschmidt:
"We accidentally broke hugetlbfs on Freescale embedded processors which
use a slightly different page table layout than our server processors"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix bad pmd error with book3E config
Pull tilepro fix from Chris Metcalf:
"This change allows the older tilepro architecture to be correctly
built by newer gccs, despite a change that caused gcc to start trying
to use an out-of-line implementation for __builtin_ffsll().
This should be inline again starting with gcc 4.7.4 and 4.8.2 or so,
but meanwhile this change keeps things from breaking, with the only
cost being a few bytes of code in the kernel to provide __ffsdi2 even
for compilers that do inline it"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tilepro: work around module link error with gcc 4.7
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)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=BcrY
-----END PGP SIGNATURE-----
Merge tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64
Pull arm64 perf fix from Catalin Marinas:
"Perf fix (user-mode PC recording)"
* tag 'arm64-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64:
perf: arm64: Record the user-mode PC in the call chain.
This patch adds defines for APM CPU implementer ID and APM CPU part numbers in asm/cputype.h
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family.
Signed-off-by: Kumar Sankaran <ksankaran@apm.com>
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Feng Kan <fkan@apm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
