To match zpci_bus_scan_device() and the PCI common code terminology and
to remove some code duplication, we pull the multiple uses of
pci_scan_single_device() into a function. For now this has the side
effect of adding each device to the PCI bus separately and locking and
unlocking the rescan/remove lock for each instead of just once per bus.
This is clearly less efficient but provides a correct intermediate
behavior until a follow on change does both the adding and scanning only
once per bus.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Convert the program check table to C. Which allows to get rid of yet
another assembler file, and also enables proper type checking for the
table.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use DECLARE_WAIT_QUEUE_HEAD to declare and statically initialize the
work_queue_head_t.
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baisong Zhong <zhongbaisong@huawei.com>
Fixes: 37564ed834 ("s390/uv: add prot virt guest/host indication files")
Link: https://lore.kernel.org/r/2f7d62a4-3e75-b2b4-951b-75ef8ef59d16@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
* fixes:
s390/entry: save the caller of psw_idle
s390/entry: avoid setting up backchain in ext|io handlers
s390/setup: use memblock_free_late() to free old stack
s390/irq: fix reading of ext_params2 field from lowcore
s390/unwind: add machine check handler stack
s390/cpcmd: fix inline assembly register clobbering
MAINTAINERS: add backups for s390 vfio drivers
s390/vdso: fix initializing and updating of vdso_data
s390/vdso: fix tod_steering_delta type
s390/vdso: copy tod_steering_delta value to vdso_data page
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently psw_idle does not allocate a stack frame and does not
save its r14 and r15 into the save area. Even though this is valid from
call ABI point of view, because psw_idle does not make any calls
explicitly, in reality psw_idle is an entry point for controlled
transition into serving interrupts. So, in practice, psw_idle stack
frame is analyzed during stack unwinding. Depending on build options
that r14 slot in the save area of psw_idle might either contain a value
saved by previous sibling call or complete garbage.
[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x8 <-- pt_regs
([task 0000038000003dd8] 0x0)
[task 0000038000003e10] default_idle_call+0x42/0x148
[task 0000038000003e30] do_idle+0xce/0x160
[task 0000038000003e70] cpu_startup_entry+0x36/0x40
[task 0000038000003ea0] arch_call_rest_init+0x76/0x80
So, to make a stacktrace nicer and actually point for the real caller of
psw_idle in this frequently occurring case, make psw_idle save its r14.
[task 0000038000003c28] do_ext_irq+0xd6/0x160
[task 0000038000003c78] ext_int_handler+0xba/0xe8
[task *0000038000003dd8] psw_idle_exit+0x0/0x6 <-- pt_regs
([task 0000038000003dd8] arch_cpu_idle+0x3c/0xd0)
[task 0000038000003e10] default_idle_call+0x42/0x148
[task 0000038000003e30] do_idle+0xce/0x160
[task 0000038000003e70] cpu_startup_entry+0x36/0x40
[task 0000038000003ea0] arch_call_rest_init+0x76/0x80
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Currently when interrupt arrives to cpu while in kernel context
INT_HANDLER macro (used for ext_int_handler and io_int_handler)
allocates new stack frame and pt_regs on the kernel stack and
sets up the backchain to jump over the pt_regs to the frame which has
been interrupted. This is not ideal to two reasons:
1. This hides the fact that kernel stack contains interrupt frame in it
and hence breaks arch_stack_walk_reliable(), which needs to know that to
guarantee "reliability" and checks that there are no pt_regs on the way.
2. It breaks the backchain unwinder logic, which assumes that the next
stack frame after an interrupt frame is reliable, while it is not.
In some cases (when r14 contains garbage) this leads to early unwinding
termination with an error, instead of marking frame as unreliable
and continuing.
To address that, only set backchain to 0.
Fixes: 56e62a7370 ("s390: convert to generic entry")
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Use memblock_free_late() to free the old machine check stack to the
buddy allocator instead of leaking it.
Fixes: b61b159512 ("s390: add stack for machine check handler")
Cc: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Due to historical reasons mark_kernel_pXd() functions
misuse the notion of physical vs virtual addresses
difference.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch fixes a lockdep splat introduced by commit f21916ec48
("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated").
The lockdep splat only occurs when starting a Secure Execution guest.
Crypto virtualization (vfio_ap) is not yet supported for SE guests;
however, in order to avoid this problem when support becomes available,
this fix is being provided.
The circular locking dependency was introduced when the setting of the
masks in the guest's APCB was executed while holding the matrix_dev->lock.
While the lock is definitely needed to protect the setting/unsetting of the
matrix_mdev->kvm pointer, it is not necessarily critical for setting the
masks; so, the matrix_dev->lock will be released while the masks are being
set or cleared.
Keep in mind, however, that another process that takes the matrix_dev->lock
can get control while the masks in the guest's APCB are being set or
cleared as a result of the driver being notified that the KVM pointer
has been set or unset. This could result in invalid access to the
matrix_mdev->kvm pointer by the intervening process. To avoid this
scenario, two new fields are being added to the ap_matrix_mdev struct:
struct ap_matrix_mdev {
...
bool kvm_busy;
wait_queue_head_t wait_for_kvm;
...
};
The functions that handle notification that the KVM pointer value has
been set or cleared will set the kvm_busy flag to true until they are done
processing at which time they will set it to false and wake up the tasks on
the matrix_mdev->wait_for_kvm wait queue. Functions that require
access to matrix_mdev->kvm will sleep on the wait queue until they are
awakened at which time they can safely access the matrix_mdev->kvm
field.
Fixes: f21916ec48 ("s390/vfio-ap: clean up vfio_ap resources when KVM pointer invalidated")
Cc: stable@vger.kernel.org
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
struct ccw1 is declared twice. One has been declared
at 21st line. Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
wait_queue_head_t can be initialized automatically with
DECLARE_WAIT_QUEUE_HEAD() rather than explicitly calling
init_waitqueue_head().
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
static spinlock can be initialized automatically with DEFINE_SPINLOCK()
rather than explicitly calling spin_lock_init().
Signed-off-by: Shixin Liu <liushixin2@huawei.com>
Acked-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
On s390 each PCI device has a user-defined ID (UID) exposed under
/sys/bus/pci/devices/<dev>/uid. This ID was designed to serve as the PCI
device's primary index and to match the device within Linux to the
device configured in the hypervisor. To serve as a primary identifier
the UID must be unique within the Linux instance, this is guaranteed by
the platform if and only if the UID Uniqueness Checking flag is set
within the CLP List PCI Functions response.
While the UID has been exposed to userspace since commit ac4995b9d5
("s390/pci: add some new arch specific pci attributes") whether or not
the platform guarantees its uniqueness for the lifetime of the Linux
instance while defined is not visible from userspace. Remedy this by
exposing this as a per device attribute at
/sys/bus/pci/devices/<dev>/uid_is_unique
Keeping this a per device attribute allows for maximum flexibility if we
ever end up with some devices not having a UID or not enjoying the
guaranteed uniqueness.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Viktor Mihajlovski <mihajlov@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
In commit dee60c0dbc ("s390/pci: add zpci_event_hard_deconfigured()")
we added a zdev_enabled() check to what was previously an uncoditional
call to zpci_disable_device(). There are two problems with that. Firstly
zpci_had_deconfigured() is only called on event 0x0304 for which the
device is always already disabled by the platform so it is always false.
Secondly zpci_disable_device() not only disables the device but also
calls zpci_dma_exit_device() which is thus not called and we leak the
DMA tables.
Fix this by calling zpci_disable_device() unconditionally to perform
Linux side cleanup including the freeing of DMA tables.
Fixes: dee60c0dbc ("s390/pci: add zpci_event_hard_deconfigured()")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Add a backup for s390 vfio-pci, an additional backup for vfio-ccw
and replace the backup for vfio-ap as Pierre is focusing on other
areas.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Jason J. Herne <jjherne@linux.ibm.com>
Link: https://lore.kernel.org/r/1616679712-7139-1-git-send-email-mjrosato@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Li Wang reported that clock_gettime(CLOCK_MONOTONIC_RAW, ...) returns
incorrect values when time is provided via vdso instead of system call:
vdso_ts_nsec = 4484351380985507, vdso_ts.tv_sec = 4484351, vdso_ts.tv_nsec = 380985507
sys_ts_nsec = 1446923235377, sys_ts.tv_sec = 1446, sys_ts.tv_nsec = 923235377
Within the s390 specific vdso function __arch_get_hw_counter() reads
tod clock steering values from the arch_data member of the passed in
vdso_data structure.
Problem is that only for the CS_HRES_COARSE vdso_data arch_data is
initialized and gets updated. The CS_RAW specific vdso_data does not
contain any valid tod_clock_steering information, which explains the
different values.
Fix this by initializing and updating all vdso_datas.
Reported-by: Li Wang <liwang@redhat.com>
Tested-by: Li Wang <liwang@redhat.com>
Fixes: 1ba2d6c0fd ("s390/vdso: simplify __arch_get_hw_counter()")
Link: https://lore.kernel.org/linux-s390/YFnxr1ZlMIOIqjfq@osiris
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The s390 specific vdso function __arch_get_hw_counter() is supposed to
consider tod clock steering.
If a tod clock steering event happens and the tod clock is set to a
new value __arch_get_hw_counter() will not return the real tod clock
value but slowly drift it from the old delta until the returned value
finally matches the real tod clock value again.
Unfortunately the type of tod_steering_delta unsigned while it is
supposed to be signed. It depends on if tod_steering_delta is negative
or positive in which direction the vdso code drifts the clock value.
Worst case is now that instead of drifting the clock slowly it will
jump into the opposite direction by a factor of two.
Fix this by simply making tod_steering_delta signed.
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When converting the vdso assembler code to C it was forgotten to
actually copy the tod_steering_delta value to vdso_data page.
Which in turn means that tod clock steering will not work correctly.
Fix this by simply copying the value whenever it is updated.
Fixes: 4bff8cb545 ("s390: convert to GENERIC_VDSO")
Cc: <stable@vger.kernel.org> # 5.10
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
prot_virt_host is only available if CONFIG_KVM is enabled. So lets use
a variable initialized to zero and overwrite it when that config
option is set with prot_virt_host.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Fixes: 37564ed834 ("s390/uv: add prot virt guest/host indication files")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
We are spending way too much effort on qdio-internal bookkeeping for
QAOB management & caching, and it's still not robust. Once qdio's
TX path has detached the QAOB from a PENDING buffer, we lost all
track of it until it shows up in a CQ notification again. So if the
device is torn down before that notification arrives, we leak the QAOB.
Just have the driver take care of it, and simply pass down a QAOB if
they want a TX with async-completion capability. For a buffer in PENDING
state that requires the QAOB for final completion, qeth can now also try
to recycle the buffer's QAOB rather than unconditionally freeing it.
This also eliminates the qdio_outbuf_state array, which was only needed
to transfer the aob->user1 tag from the driver to the qdio layer.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The zpci_remove_device() function removes the device from the PCI common
code core which is an operation dealing primarily with the zbus and PCI
bus code. With that and to match an upcoming refactoring of the
symmetric scanning part move it to the bus code.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
A zPCI event with PEC 0x0301 for an existing zPCI device goes through
the same actions as enable_slot(). Similarly a zPCI event with PEC
0x0303 does the same steps as disable_slot().
We can thus unify both actions as zpci_configure_device() respectively
zpci_deconfigure_device().
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces the mechanism to inject artificial events to the
CIO layer.
One of the main-event type which triggers the CommonIO operations are
Channel Report events. When a malfunction or other condition affecting
channel-subsystem operation is recognized, a Channel Report Word
(consisting of one or more CRWs) describing the condition is made
pending for retrieval and analysis by the program. The CRW contains
information concerning the identity and state of a facility following
the detection of the malfunction or other condition.
The patch introduces two debugfs interfaces which can be used to inject
'artificial' events from the userspace. It is intended to provide an easy
means to increase the test coverage for CIO code. And this functionality
can be enabled via a new configuration option CONFIG_CIO_INJECT.
The newly introduces debugfs interfaces can be used as mentioned below
to generate different fake-events. To use the crw_inject, first we should
enable it by using enable_inject interface.
i.e
echo 1 > /sys/kernel/debug/s390/cio/enable_inject
After the first step, user can simulate CRW as follows:
echo <solicited> <overflow> <chaining> <rsc> <ancillary> <erc> <rsid> \
> /sys/kernel/debug/s390/cio/crw_inject
Example:
A permanent error ERC on CHPID 0x60 would look like this:
echo 0 0 0 4 0 6 0x60 > /sys/kernel/debug/s390/cio/crw_inject
and an initialized ERC on the same CHPID:
echo 0 0 0 4 0 2 0x60 > /sys/kernel/debug/s390/cio/crw_inject
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch introduces an s390 Common I/O layer debugfs directory that is
intended to provide access to debugging-related CIO functions and data.
The directory is created as /sys/kernel/debug/s390/cio
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Extract the handling of PEC 0x0304 into a function and make sure we only
attempt to disable the function if it is enabled. Also check for errors
returned by zpci_disable_device() and leave the function alone if there
are any.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
When zpci_release_device() is called on a zPCI function that is still
configured it would not be deconfigured. Until now this hasn't caused
any problems because zpci_zdev_put() is only ever called for devices
in Standby or Reserved. Fix it by adding sclp_pci_deconfigure() to the
switch when in Configured state.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The current zdev->state mixes the configuration states supported by CLP
with an additional Online state which is used inconsistently to include
enabled zPCI functions which are not yet visible to the common PCI
subsytem. In preparation for a clean separation between architected
configuration states and fine grained function states remove the Online
function state.
Where we previously checked for Online it is more accurate to check if
the function is enabled to avoid an edge case where a disabled device
was still treated as Online. This also simplifies checks whether
a function is configured as this is now directly reflected by its
function state.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Kernel and console/TTY messages written to the SCLP line mode console
are wrapped at 80 characters per line by the associated SCLP driver.
This makes long lines of output difficult to read, and requires editing
of wrapped lines copied from the output device.
Neither the firmware interface used to access the SCLP console, nor the
HMC "Operating System Messages" web interface that displays these
messages require such a length limit. Also other operating systems such
as z/VM do not impose similar limits on messages they emit to the same
console device.
This patch therefore increases the limit to 320 characters per line to
make SCLP line mode console output more readable. As a result 99% of
lines written during a typical boot will not be wrapped, compared to
about 50% wrapped lines at 80 characters per line. Another positive
side-effect of this change is that the HMC console interface is able to
keep more messages in its history buffer due to fewer line-breaks being
generated.
In a worst case scenario this means that a 4k console buffer is emitted
with the last ~400 bytes empty (320 text + 78 headers). This is more
than offset by the fact that each line that is not truncated saves 78
header bytes in the buffer. As a result the actual number of emitted
buffers should be about the same as with the 80 character limit.
This patch also removes the differentiation between line lengths of
SCLP line mode output on z/VM and non-z/VM systems. While the z/VM
hypervisor adds a prefix in front of each line ('xx: ' where xx is the
number of the CPU issuing the message), adjusting Linux line lengths did
not significantly increase readability of console output, and makes even
less of a difference with longer lines.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Let's export the prot_virt_guest and prot_virt_host variables into the
UV sysfs firmware interface to make them easily consumable by
administrators.
prot_virt_host being 1 indicates that we did the UV
initialization (opt-in)
prot_virt_guest being 1 indicates that the UV indicates the share and
unshare ultravisor calls which is an indication that we are running as
a protected guest.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmBXj1oACgkQ8vlZVpUN
gaNnAwgAqZJ0S/Hctexs+v+DNvuyMxsA84pB/9KYlK2zgbBOyK5Iftxjqxb9Sb6j
6XKQOIaP2EXYJ0MDWW/fDMUHatlJvXUp+A9kLTiOLMDaRXbobQzb5jlGg9ZB/pBj
TzISrR4widiqJbVT2RFpO9O7B75BQqlpqFNfkF/yJ9CU/ozAw9x+voPcZK7q8/Sh
+DeQCARvgfx1ZipHGTYKjJdujA0qGcDfboYJpgId/gA5Zi76tx4NlbeXAM2QmRfh
zAd1NzFhqf7JmKDAWDdUeRnrDHcje9FLcAxo7Quq7YWxRKFsOCz9LTxazL2UIoa2
HvGpMD23qmISCLUyyrfnrpGPj/mD2w==
=xcuH
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v5.12"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: initialize ret to suppress smatch warning
ext4: stop inode update before return
ext4: fix rename whiteout with fast commit
ext4: fix timer use-after-free on failed mount
ext4: fix potential error in ext4_do_update_inode
ext4: do not try to set xattr into ea_inode if value is empty
ext4: do not iput inode under running transaction in ext4_rename()
ext4: find old entry again if failed to rename whiteout
ext4: fix error handling in ext4_end_enable_verity()
ext4: fix bh ref count on error paths
fs/ext4: fix integer overflow in s_log_groups_per_flex
ext4: add reclaim checks to xattr code
ext4: shrink race window in ext4_should_retry_alloc()
-----BEGIN PGP SIGNATURE-----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=xaEf
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block
Pull io_uring followup fixes from Jens Axboe:
- The SIGSTOP change from Eric, so we properly ignore that for
PF_IO_WORKER threads.
- Disallow sending signals to PF_IO_WORKER threads in general, we're
not interested in having them funnel back to the io_uring owning
task.
- Stable fix from Stefan, ensuring we properly break links for short
send/sendmsg recv/recvmsg if MSG_WAITALL is set.
- Catch and loop when needing to run task_work before a PF_IO_WORKER
threads goes to sleep.
* tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block:
io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL
io-wq: ensure task is running before processing task_work
signal: don't allow STOP on PF_IO_WORKER threads
signal: don't allow sending any signals to PF_IO_WORKER threads
Here are some small staging and IIO driver fixes for 5.12-rc4.
They include:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYFc7qw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynn+QCffC5Zjkde07XiyTwksdVu6FaV2M4AnimVDEIG
u14uiz3TU1bd81gn1YLi
=47FR
-----END PGP SIGNATURE-----
Merge tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver fixes from Greg KH:
"Some small staging and IIO driver fixes:
- MAINTAINERS changes for the move of the staging mailing list
- comedi driver fixes to get request_irq() to work correctly
- counter driver fixes for reported issues with iio devices
- tiny iio driver fixes for reported issues.
All of these have been in linux-next with no reported problems"
* tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt665x: fix alignment constraints
staging: comedi: cb_pcidas64: fix request_irq() warn
staging: comedi: cb_pcidas: fix request_irq() warn
MAINTAINERS: move the staging subsystem to lists.linux.dev
MAINTAINERS: move some real subsystems off of the staging mailing list
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: hid-sensor-temperature: Fix issues of timestamp channel
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: hid-sensor-prox: Fix scale not correct issue
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYFc8ag8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykrHwCfdSigXZ7IFgVcN+428ml0Ko/yG4AAn2Hkv2or
+ayuj/5GM/9I6Bt8aryk
=zzfw
-----END PGP SIGNATURE-----
Merge tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB and Thunderbolt driver fixes from Greg KH:
"Here are some small Thunderbolt and USB driver fixes for some reported
issues:
- thunderbolt fixes for minor problems
- typec fixes for power issues
- usb-storage quirk addition
- usbip bugfix
- dwc3 bugfix when stopping transfers
- cdnsp bugfix for isoc transfers
- gadget use-after-free fix
All have been in linux-next this week with no reported issues"
* tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
usb-storage: Add quirk to defeat Kindle's automatic unload
usb: gadget: configfs: Fix KASAN use-after-free
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
usb: cdnsp: Fixes incorrect value in ISOC TRB
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
plus a DocBook fix.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=IkEX
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Ingo Molnar:
"A change to robustify force-threaded IRQ handlers to always disable
interrupts, plus a DocBook fix.
The force-threaded IRQ handler change has been accelerated from the
normal schedule of such a change to keep the bad pattern/workaround of
spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from
spreading"
* tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Disable interrupts for force threaded handlers
genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)
- another missing RT_PROP table related fix, to ensure that the efivarfs
pseudo filesystem fails gracefully if variable services are unsupported,
- use the correct alignment for literal EFI GUIDs,
- fix a use after unmap issue in the memreserve code
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=la6v
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
- another missing RT_PROP table related fix, to ensure that the
efivarfs pseudo filesystem fails gracefully if variable services
are unsupported
- use the correct alignment for literal EFI GUIDs
- fix a use after unmap issue in the memreserve code
* tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: use 32-bit alignment for efi_guid_t literals
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
efivars: respect EFI_UNSUPPORTED return from firmware
devicetree-node lookups.
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall number.
Split in a 4-patches set to avoid kABI breakage when backporting to dead
kernels.
-----BEGIN PGP SIGNATURE-----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=WfC4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"The freshest pile of shiny x86 fixes for 5.12:
- Add the arch-specific mapping between physical and logical CPUs to
fix devicetree-node lookups
- Restore the IRQ2 ignore logic
- Fix get_nr_restart_syscall() to return the correct restart syscall
number. Split in a 4-patches set to avoid kABI breakage when
backporting to dead kernels"
* tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/of: Fix CPU devicetree-node lookups
x86/ioapic: Ignore IRQ2 again
x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
x86: Move TS_COMPAT back to asm/thread_info.h
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io
PCI hotplug driver.
Two build fixes for uncommon configurations.
Thanks to Christophe Leroy, Tyrel Datwyler.
-----BEGIN PGP SIGNATURE-----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=SHvi
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a possible stack corruption and subsequent DLPAR failure in the
rpadlpar_io PCI hotplug driver
- Two build fixes for uncommon configurations
Thanks to Christophe Leroy and Tyrel Datwyler.
* tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
PCI: rpadlpar: Fix potential drc_name corruption in store functions
powerpc: Force inlining of cpu_has_feature() to avoid build failure
powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
Without that it's not safe to use them in a linked combination with
others.
Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE
should be possible.
We already handle short reads and writes for the following opcodes:
- IORING_OP_READV
- IORING_OP_READ_FIXED
- IORING_OP_READ
- IORING_OP_WRITEV
- IORING_OP_WRITE_FIXED
- IORING_OP_WRITE
- IORING_OP_SPLICE
- IORING_OP_TEE
Now we have it for these as well:
- IORING_OP_SENDMSG
- IORING_OP_SEND
- IORING_OP_RECVMSG
- IORING_OP_RECV
For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC
flags in order to call req_set_fail_links().
There might be applications arround depending on the behavior
that even short send[msg]()/recv[msg]() retuns continue an
IOSQE_IO_LINK chain.
It's very unlikely that such applications pass in MSG_WAITALL,
which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'.
It's expected that the low level sock_sendmsg() call just ignores
MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set
SO_ZEROCOPY.
We also expect the caller to know about the implicit truncation to
MAX_RW_COUNT, which we don't detect.
cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
