The recently introduced unit descriptor validation had some bug for
processing and extension units, it counts a bControlSize byte twice so
it expected a bigger size than it should have been. This seems
resulting in a probe error on a few devices.
Fix the calculation for proper checks of PU and EU.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commit 60849562a5 ("ALSA: usb-audio: Fix possible NULL
dereference at create_yamaha_midi_quirk()") added NULL checks in
create_yamaha_midi_quirk(), but there was an overlook. The code
allows one of either injd or outjd is NULL, but the second if check
made returning -ENODEV if any of them is NULL. Fix it in a proper
form.
Fixes: 60849562a5 ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While output urb's snd_complete_urb() is executing, calling
prepare_outbound_urb() may cause endpoint stopped before
prepare_outbound_urb() returns and result in next urb submitted
to stopped endpoint. usb-audio driver cannot re-use it afterwards as
the urb is still hold by usb stack.
This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again
to let snd_complete_urb() know the endpoint already stopped and does not
submit next urb. Below kind of error will be fixed:
[ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1
[ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error
Signed-off-by: Henry Lin <henryl@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A check of the return value from get_cur_mix_raw() is missing at the
resolution test code in get_min_max_with_quirks(), which may leave the
variable untouched, leading to a random uninitialized value, as
detected by syzkaller fuzzer.
Add the missing return error check for fixing that.
Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recently introduced USB-audio descriptor validator had a stupid
copy&paste error that may lead to an unexpected overlook of too short
descriptors for processing and extension units. It's likely the cause
of the report triggered by syzkaller fuzzer. Let's fix it.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: syzbot+0620f79a1978b1133fd7@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/s5hsgnkdbsl.wl-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
EVGA NU Audio is actually a USB audio device on a PCIexpress card,
with it's own USB controller. It supports both PCM and DSD.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190924071143.30911-1-jussi@sonarnerd.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds quirk VID ID for Hiby portable players family with
native DSD playback support.
Signed-off-by: Ilya Pshonkin <sudokamikaze@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190917074937.157802-1-ilya.pshonkin@netforce.ua
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Oppo has issued firmware updates that change alt setting used for DSD
support. However, these devices seem to support auto-detection, so
support is moved from explicit whitelisting to auto-detection.
Also Rotel devices have USB interfaces that support DSD with
auto-detection.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add DSD support auto-detection for newer Playback Designs devices. Older
device generations have a different USB interface implementation.
Keep the auto-detection VID whitelist sorted.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We recently cleaned up the error handling in commit 52c3e317a8 ("ALSA:
usb-audio: Unify the release of usb_mixer_elem_info objects") but
accidentally left this stray return.
Fixes: 52c3e317a8 ("ALSA: usb-audio: Unify the release of usb_mixer_elem_info objects")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous addition of descriptor validation may lead to a NULL
dereference at create_yamaha_midi_quirk() when either injd or outjd is
NULL. Add proper non-NULL checks.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The primary changes in this patch are cleanups of __check_input_term()
and move to a non-nested switch-case block by evaluating the pair of
UAC version and the unit type, as we've done for parse_audio_unit().
Also each parser is split into the function for readability.
Now, a slight behavior change by this cleanup is the handling of
processing and extension units. Formerly we've dealt with them
differently between UAC1/2 and UAC3; the latter returns an error if no
input sources are available, while the former continues to parse.
In this patch, unify the behavior in all cases: when input sources are
available, it parses recursively, then override the type and the id,
as well as channel information if not provided yet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull USB validation patches. It's based on the latest 5.3 development
branch, so we shall catch up the whole things.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that we got the more comprehensive validation code for USB-audio
descriptors, the check of overflow in each descriptor unit parser
became superfluous. Drop some of the obvious cases.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of the direct kfree() calls, introduce a new local helper to
release the usb_mixer_elem_info object. This will be extended to do
more than a single kfree() in the later patches.
Also, use the standard goto instead of multiple calls in
parse_audio_selector_unit() error paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Minor code refactoring by combining the UAC version and the type in
the switch-case flow, so that we reduce the indentation and
redundancy. One good bonus is that the duplicated definition of the
same type value (e.g. UAC2_EFFECT_UNIT) can be handled more cleanly.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Introduce a new helper to validate each audio descriptor unit before
and check the unit before actually accessing it. This should harden
against the OOB access cases with malformed descriptors that have been
recently frequently reported by fuzzers.
The existing descriptor checks are still kept although they become
superfluous after this patch. They'll be cleaned up eventually
later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The bmControls (for UAC1) or bmMixerControls (for UAC2/3) bitmap has a
variable size depending on both input and output pins. Its size is to
fit with input * output bits. The problem is that the input size
can't be determined simply from the unit descriptor itself but it
needs to parse the whole connected sources. Although the
uac_mixer_unit_get_channels() tries to check some possible overflow of
this bitmap, it's incomplete due to the lack of the evaluation of
input pins.
For covering possible overflows, this patch adds the bitmap overflow
check in the loop of input pins in parse_audio_mixer_unit().
Fixes: 0bfe5e434e ("ALSA: usb-audio: Check mixer unit descriptors more strictly")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
I forgot to release the allocated object at the early error path in
line6_init_pcm(). For addressing it, slightly shuffle the code so
that the PCM destructor (pcm->private_free) is assigned properly
before all error paths.
Fixes: 3450121997 ("ALSA: line6: Fix write on zero-sized buffer")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The quirk function snd_emuusb_set_samplerate() has a NULL check for
the mixer element, but this is useless in the current code. It used
to be a check against mixer->id_elems[unitid] but it was changed later
to the value after mixer_eleme_list_to_info() which is always non-NULL
due to the container_of() usage.
This patch fixes the check before the conversion.
While we're at it, correct a typo in the comment in the function,
too.
Fixes: 8c558076c7 ("ALSA: usb-audio: Clean up mixer element list traverse")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Behringer UFX1604 requires the similar quirk to apply implicit fb like
another Behringer model UFX1204 in order to fix the noisy playback.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204631
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
`check_input_term` recursively calls itself with input from
device side (e.g., uac_input_terminal_descriptor.bCSourceID)
as argument (id). In `check_input_term`, if `check_input_term`
is called with the same `id` argument as the caller, it triggers
endless recursive call, resulting kernel space stack overflow.
This patch fixes the bug by adding a bitmap to `struct mixer_build`
to keep track of the checked ids and stop the execution if some id
has been checked (similar to how parse_audio_unit handles unitid
argument).
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Signed-off-by: Hui Peng <benquike@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The `uac_mixer_unit_descriptor` shown as below is read from the
device side. In `parse_audio_mixer_unit`, `baSourceID` field is
accessed from index 0 to `bNrInPins` - 1, the current implementation
assumes that descriptor is always valid (the length of descriptor
is no shorter than 5 + `bNrInPins`). If a descriptor read from
the device side is invalid, it may trigger out-of-bound memory
access.
```
struct uac_mixer_unit_descriptor {
__u8 bLength;
__u8 bDescriptorType;
__u8 bDescriptorSubtype;
__u8 bUnitID;
__u8 bNrInPins;
__u8 baSourceID[];
}
```
This patch fixes the bug by add a sanity check on the length of
the descriptor.
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Peng <benquike@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later
on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In
hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through
kzalloc(). However, if hiface_pcm_init_urb() fails, both 'rt' and
'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs.
Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails.
To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'.
Fixes: a91c3fb2f8 ("Add M2Tech hiFace USB-SPDIF driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Pioneer DDJ-SX3 is a plain 12 32bit channel out and 10 channel in
PCM/midi controller. The PCM part is "vendor specific".
It needs the "ignore invalid bsynchaddress" patch as it uses 0 for that.
Signed-off-by: Ard van Breemen <ard@kwaak.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Linux kernel assumes that get_endpoint(alts,0) and
get_endpoint(alts,1) are eachothers feedback endpoints.
To reassure that validity it will test bsynchaddress to comply with that
assumption. But if the bsyncaddress is 0 (invalid), it will flag that as
a wrong assumption and return an error.
Fix: Skip the test if bSynchAddress is 0.
Note: those with a valid bSynchAddress should have a code quirck added.
Signed-off-by: Ard van Breemen <ard@kwaak.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some cards have alternate setting with non-PCM format as the first
altsetting in the interface descriptors. This confuses userspace, since
alsa-lib uses device 0 by default. So lets parse interfaces in two steps:
1. Parse altsettings with PCM formats.
2. Parse altsettings with non-PCM formats.
This fixes at least following cards:
- Audinst HUD-mx2
- Audinst HUD-mini
[ Adapted to 5.3 kernel by tiwai ]
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are many open code for releasing audioformat object.
Provide a unified helper and call it from the all places.
Only a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_usb_get_audioformat_uac3(), a structure for channel maps 'chmap' is
allocated through kzalloc() before the execution goto 'found_clock'.
However, this structure is not deallocated if the memory allocation for
'pd' fails, leading to a memory leak bug.
To fix the above issue, free 'fp->chmap' before returning NULL.
Fixes: 7edf3b5e6a ("ALSA: usb-audio: AudioStreaming Power Domain parsing")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
syzbot found the following crash on:
general protection fault: 0000 [#1] SMP KASAN
RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75
Call Trace:
snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007
snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline]
snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280
usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x650 drivers/base/dd.c:548
....
It was introduced in commit 801ebf1043 for checking pipe and endpoint
types. It is fixed by adding a check of the ep pointer in question.
BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2
Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com>
Fixes: 801ebf1043 ("ALSA: usb-audio: Sanity checks for each pipe and EP types")
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add mixer quirk for the Focusrite Scarlett 6i6, 18i8, and 18i20 Gen 2
audio interfaces. Although the interfaces are USB compliant,
additional input/output level controls and hardware routing/mixing
functionality are available using proprietary USB requests.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sizeof (byte) is always 1, use that fact and make interesting code explicit.
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 7b9584fa1c ("staging: line6: Move altsetting to properties")
set a wrong altsetting for LINE6_PODHD500_1 during refactoring.
Set the correct altsetting number to fix the issue.
BugLink: https://bugs.launchpad.net/bugs/1790595
Fixes: 7b9584fa1c ("staging: line6: Move altsetting to properties")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl0jGwUTHGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0LD4B/9AkutfS+vznOrk0V0wFb2SUfjwE4Pr
+z/kAehohAOl/7pg9Dun/lmZYBWMyOM2aYmK81ahEo2DfO+uzwkwjCaXFjGVGwEK
j7XpWkrIjKnou/z1FeALgVvt+crzdy5iNWC04AbKaP2WHCcI7zvPQIsBta/V0OJt
lg+j0J7pagnTMcgV1+qJdaASmofy/hpoZ79Gv0PIfGC8hpJ/3mBgcNPCLQrJtD4R
v+tzvCZNrZVqCanwLf3vouEm1bpWYOpI+Wdmu4u6rY7MhmCj72EJ2zyfdm/qtaxF
e7whgCyOQFkWe7NgDn0G08aAT6LsaxOtPNr7H8tL8S8sw8425fqeOouV
=n/HQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.3
This is a very big update, mainly thanks to Morimoto-san's refactoring
work and some fairly large new drivers.
- Lots more work on moving towards a component based framework from
Morimoto-san.
- Support for force disconnecting muxes from Jerome Brunet.
- New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
CX2072X, Realtek RT1011 and RT1308.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Line6 Helix and HX stomp devices don't support retrieving
the number of clock sample rate.
Add a quirk to set it to 48Khz by default.
[ fixed wrong variable initialization changes by tiwai ]
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Extension Unit (XU) is used to have a compatible layout with
Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it
for parsing the descriptors. Meanwhile, on UAC2, XU became slightly
incompatible with PU; namely, XU has a one-byte bmControls bitmap
while PU has two bytes bmControls bitmap. This incompatibility
results in the read of a wrong address for the last iExtension field,
which ended up with an incorrect string for the mixer element name, as
recently reported for Focusrite Scarlett 18i20 device.
This patch corrects this misalignment by introducing a couple of new
macros and calling them depending on the descriptor type.
Fixes: 23caaf19b1 ("ALSA: usb-mixer: Add support for Audio Class v2.0")
Reported-by: Stefan Sauer <ensonic@hora-obscura.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
LINE6 drivers allocate the buffers based on the value returned from
usb_maxpacket() calls. The manipulated device may return zero for
this, and this results in the kmalloc() with zero size (and it may
succeed) while the other part of the driver code writes the packet
data with the fixed size -- which eventually overwrites.
This patch adds a simple sanity check for the invalid buffer size for
avoiding that problem.
Reported-by: syzbot+219f00fb49874dcaea17@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This back-merge is necessary for adjusting the latest FireWire fix
with the recent refactoring in 5.3 development branch.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are a couple of left shifts of unsigned 8 bit values that
first get promoted to signed ints and hence get sign extended
on the shift if the top bit of the 8 bit values are set. Fix
this by casting the 8 bit values to unsigned ints to stop the
unintentional sign extension.
Addresses-Coverity: ("Unintended sign extension")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent USB core code performs sanity checks for the given pipe and
EP types, and it can be hit by manipulated USB descriptors by syzbot.
For making syzbot happier, this patch introduces a local helper for a
sanity check in the driver side and calls it at each place before the
message handling, so that we can avoid the WARNING splats.
Reported-by: syzbot+d952e5e28f5fb7718d23@syzkaller.appspotmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
"git diff" says:
\ No newline at end of file
after modifying the files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Emagic Unitor 8 does not provide iManufacturer and iProduct fields
in its device descriptor. These fields are used by alsa to make build the
device name. Thus uncomment the .product-name in the quirks-table.
Without this change the device shows up as 'USB Device 0x86a:0x01'.
Output of lsusb and amidi:
https://gist.github.com/ensonic/7820a102e91f31575be355da2b6b33bc
Signed-off-by: Stefan Sauer <ensonic@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 135 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this driver is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 this
driver is distributed in the hope that it will be useful but without
any warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this driver if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 9 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.769845457@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
