DMA_SHARED_BUFFER can not be enabled by the user (it represents a library
set in the kernel). The kconfig convention is to use select for such
symbols so they are turned on implicitly when the user enables a kconfig
that needs them.
Otherwise the XEN_GNTDEV_DMABUF kconfig is overly difficult to enable.
Fixes: 932d656217 ("xen/gntdev: Add initial support for dma-buf UAPI")
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel@lists.xenproject.org
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
The xen_mm_init is not exported or used outside of the file
it is declared in, so make it static. This fixes the following
sparse warning:
arch/arm/xen/mm.c:136:12: warning: symbol 'xen_mm_init' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Include <xen/xen-ops.h> for xen_{create,destroy}_contigous_region
call declarations. Fixes the following sparse warnings:
arch/arm/xen/mm.c:119:5: warning: symbol 'xen_create_contiguous_region' was not declared. Should it be static?
arch/arm/xen/mm.c:131:6: warning: symbol 'xen_destroy_contiguous_region' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Merge more fixes from Andrew Morton:
"17 fixes"
Mostly mm fixes and one ocfs2 locking fix.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
mm/memory_hotplug: fix updating the node span
scripts/gdb: fix debugging modules compiled with hot/cold partitioning
mm: slab: make page_cgroup_ino() to recognize non-compound slab pages properly
MAINTAINERS: update information for "MEMORY MANAGEMENT"
dump_stack: avoid the livelock of the dump_lock
zswap: add Vitaly to the maintainers list
mm/page_alloc.c: ratelimit allocation failure warnings more aggressively
mm/khugepaged: fix might_sleep() warn with CONFIG_HIGHPTE=y
mm, vmstat: reduce zone->lock holding time by /proc/pagetypeinfo
mm, vmstat: hide /proc/pagetypeinfo from normal users
mm/mmu_notifiers: use the right return code for WARN_ON
ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
mm: thp: handle page cache THP correctly in PageTransCompoundMap
mm, meminit: recalculate pcpu batch and high limits after init completes
mm/gup_benchmark: fix MAP_HUGETLB case
mm: memcontrol: fix NULL-ptr deref in percpu stats flush
While upgrading from 4.16 to 5.2, we noticed these allocation errors in
the log of the new kernel:
SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
node 0: slabs: 5, objs: 170, free: 0
slab_out_of_memory+1
___slab_alloc+969
__slab_alloc+14
kmem_cache_alloc+346
inet_twsk_alloc+60
tcp_time_wait+46
tcp_fin+206
tcp_data_queue+2034
tcp_rcv_state_process+784
tcp_v6_do_rcv+405
__release_sock+118
tcp_close+385
inet_release+46
__sock_release+55
sock_close+17
__fput+170
task_work_run+127
exit_to_usermode_loop+191
do_syscall_64+212
entry_SYSCALL_64_after_hwframe+68
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is e699e2c6a6 ("net, mm: account
sock objects to kmemcg"), which made these slab caches subject to cgroup
memory accounting and control.
The problem with that is that cgroups, unlike the page allocator, do not
maintain dedicated atomic reserves. As a cgroup's usage hovers at its
limit, atomic allocations - such as done during network rx - can fail
consistently for extended periods of time. The kernel is not able to
operate under these conditions.
We don't want to revert the culprit patch, because it indeed tracks a
potentially substantial amount of memory used by a cgroup.
We also don't want to implement dedicated atomic reserves for cgroups.
There is no point in keeping a fixed margin of unused bytes in the
cgroup's memory budget to accomodate a consumer that is impossible to
predict - we'd be wasting memory and get into configuration headaches,
not unlike what we have going with min_free_kbytes. We do this for
physical mem because we have to, but cgroups are an accounting game.
Instead, account these privileged allocations to the cgroup, but let
them bypass the configured limit if they have to. This way, we get the
benefits of accounting the consumed memory and have it exert pressure on
the rest of the cgroup, but like with the page allocator, we shift the
burden of reclaimining on behalf of atomic allocations onto the regular
allocations that can block.
Link: http://lkml.kernel.org/r/20191022233708.365764-1-hannes@cmpxchg.org
Fixes: e699e2c6a6 ("net, mm: account sock objects to kmemcg")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We recently started updating the node span based on the zone span to
avoid touching uninitialized memmaps.
Currently, we will always detect the node span to start at 0, meaning a
node can easily span too many pages. pgdat_is_empty() will still work
correctly if all zones span no pages. We should skip over all zones
without spanned pages and properly handle the first detected zone that
spans pages.
Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node
span cannot easily be inspected and tested. The node span gives no real
guarantees when an architecture supports memory hotplug, meaning it can
easily contain holes or span pages of different nodes.
The node span is not really used after init on architectures that
support memory hotplug.
E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in
mm/kmemleak.c:kmemleak_scan(). These users seem to be fine.
Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com
Fixes: 00d6c019b5 ("mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively. At least when building modules on s390, this option is
used by default.
gdb assumes that all code is located in .text section, and that .text
section is located at module load address. With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.
Fix by explicitly telling gdb the addresses of code sections.
It might be tempting to do this for all sections, not only the ones in
the white list. Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols. So
keep using the white list approach for the time being.
Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page_cgroup_ino() doesn't return a valid memcg pointer for non-compound
slab pages, because it depends on PgHead AND PgSlab flags to be set to
determine the memory cgroup from the kmem_cache. It's correct for
compound pages, but not for generic small pages. Those don't have PgHead
set, so it ends up returning zero.
Fix this by replacing the condition to PageSlab() && !PageTail().
Before this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 38 0 _______S___________________________________ slab
After this patch:
[root@localhost ~]# ./page-types -c /sys/fs/cgroup/user.slice/user-0.slice/user@0.service/ | grep slab
0x0000000000000080 147 0 _______S___________________________________ slab
Also, hwpoison_filter_task() uses output of page_cgroup_ino() in order
to filter error injection events based on memcg. So if
page_cgroup_ino() fails to return memcg pointer, we just fail to inject
memory error. Considering that hwpoison filter is for testing, affected
users are limited and the impact should be marginal.
[n-horiguchi@ah.jp.nec.com: changelog additions]
Link: http://lkml.kernel.org/r/20191031012151.2722280-1-guro@fb.com
Fixes: 4d96ba3530 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I was trying to find the mm tree in MAINTAINERS by searching "Morton".
Unfortunately, I didn't find one. And I didn't even locate the MEMORY
MANAGEMENT section quickly, because Andrew's name was not listed there.
Thanks to Johannes who helped me find the mm tree.
Let save other's time searching around by adding:
M: Andrew Morton <akpm@linux-foundation.org>
T: git git://github.com/hnaz/linux-mm.git
[akpm@linux-foundation.org: add ozlabs.org quilt trees]
Link: http://lkml.kernel.org/r/20191030202217.3498133-1-songliubraving@fb.com
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current code, we use the atomic_cmpxchg() to serialize the output
of the dump_stack(), but this implementation suffers the thundering herd
problem. We have observed such kind of livelock on a Marvell cn96xx
board(24 cpus) when heavily using the dump_stack() in a kprobe handler.
Actually we can let the competitors to wait for the releasing of the
lock before jumping to atomic_cmpxchg(). This will definitely mitigate
the thundering herd problem. Thanks Linus for the suggestion.
[akpm@linux-foundation.org: fix comment]
Link: http://lkml.kernel.org/r/20191030031637.6025-1-haokexin@gmail.com
Fixes: b58d977432 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per conversation with Dan, add myself to the zswap MAINTAINERS list.
Link: http://lkml.kernel.org/r/20191028143154.31304-1-vitaly.wool@konsulko.com
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Acked-by: Dan Streetman <ddstreet@ieee.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While investigating a bug related to higher atomic allocation failures,
we noticed the failure warnings positively drowning the console, and in
our case trigger lockup warnings because of a serial console too slow to
handle all that output.
But even if we had a faster console, it's unclear what additional
information the current level of repetition provides.
Allocation failures happen for three reasons: The machine is OOM, the VM
is failing to handle reasonable requests, or somebody is making
unreasonable requests (and didn't acknowledge their opportunism with
__GFP_NOWARN). Having the memory dump, a callstack, and the ratelimit
stats on skipped failure warnings should provide enough information to
let users/admins/developers know whether something is wrong and point
them in the right direction for debugging, bpftracing etc.
Limit allocation failure warnings to one spew every ten seconds.
Link: http://lkml.kernel.org/r/20191028194906.26899-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I got some khugepaged spew on a 32bit x86:
BUG: sleeping function called from invalid context at include/linux/mmu_notifier.h:346
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 25, name: khugepaged
INFO: lockdep is turned off.
CPU: 1 PID: 25 Comm: khugepaged Not tainted 5.4.0-rc5-elk+ #206
Hardware name: System manufacturer P5Q-EM/P5Q-EM, BIOS 2203 07/08/2009
Call Trace:
dump_stack+0x66/0x8e
___might_sleep.cold.96+0x95/0xa6
__might_sleep+0x2e/0x80
collapse_huge_page.isra.51+0x5ac/0x1360
khugepaged+0x9a9/0x20f0
kthread+0xf5/0x110
ret_from_fork+0x2e/0x38
Looks like it's due to CONFIG_HIGHPTE=y pte_offset_map()->kmap_atomic()
vs. mmu_notifier_invalidate_range_start(). Let's do the naive approach
and just reorder the two operations.
Link: http://lkml.kernel.org/r/20191029201513.GG1208@intel.com
Fixes: 810e24e009 ("mm/mmu_notifiers: annotate with might_sleep()")
Signed-off-by: Ville Syrjl <ville.syrjala@linux.intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pagetypeinfo_showfree_print is called by zone->lock held in irq mode.
This is not really nice because it blocks both any interrupts on that
cpu and the page allocator. On large machines this might even trigger
the hard lockup detector.
Considering the pagetypeinfo is a debugging tool we do not really need
exact numbers here. The primary reason to look at the outuput is to see
how pageblocks are spread among different migratetypes and low number of
pages is much more interesting therefore putting a bound on the number
of pages on the free_list sounds like a reasonable tradeoff.
The new output will simply tell
[...]
Node 6, zone Normal, type Movable >100000 >100000 >100000 >100000 41019 31560 23996 10054 3229 983 648
instead of
Node 6, zone Normal, type Movable 399568 294127 221558 102119 41019 31560 23996 10054 3229 983 648
The limit has been chosen arbitrary and it is a subject of a future
change should there be a need for that.
While we are at it, also drop the zone lock after each free_list
iteration which will help with the IRQ and page allocator responsiveness
even further as the IRQ lock held time is always bound to those 100k
pages.
[akpm@linux-foundation.org: tweak comment text, per David Hildenbrand]
Link: http://lkml.kernel.org/r/20191025072610.18526-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation. It is not very useful for any
other use so normal users really do not need to read this file.
Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.
Reduce both issues by simply not exporting the file to regular users.
Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes: 467c996c1e ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Waiman Long <longman@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jann Horn <jannh@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The return code from the op callback is actually in _ret, while the
WARN_ON was checking ret which causes it to misfire.
Link: http://lkml.kernel.org/r/20191025175502.GA31127@ziepe.ca
Fixes: 8402ce61be ("mm/mmu_notifiers: check if mmu notifier callbacks are allowed to fail")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the extent tree is modified, it should be protected by inode
cluster lock and ip_alloc_sem.
The extent tree is accessed and modified in the
ocfs2_prepare_inode_for_write, but isn't protected by ip_alloc_sem.
The following is a case. The function ocfs2_fiemap is accessing the
extent tree, which is modified at the same time.
kernel BUG at fs/ocfs2/extent_map.c:475!
invalid opcode: 0000 [#1] SMP
Modules linked in: tun ocfs2 ocfs2_nodemanager configfs ocfs2_stackglue [...]
CPU: 16 PID: 14047 Comm: o2info Not tainted 4.1.12-124.23.1.el6uek.x86_64 #2
Hardware name: Oracle Corporation ORACLE SERVER X7-2L/ASM, MB MECH, X7-2L, BIOS 42040600 10/19/2018
task: ffff88019487e200 ti: ffff88003daa4000 task.ti: ffff88003daa4000
RIP: ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
Call Trace:
ocfs2_fiemap+0x1e3/0x430 [ocfs2]
do_vfs_ioctl+0x155/0x510
SyS_ioctl+0x81/0xa0
system_call_fastpath+0x18/0xd8
Code: 18 48 c7 c6 60 7f 65 a0 31 c0 bb e2 ff ff ff 48 8b 4a 40 48 8b 7a 28 48 c7 c2 78 2d 66 a0 e8 38 4f 05 00 e9 28 fe ff ff 0f 1f 00 <0f> 0b 66 0f 1f 44 00 00 bb 86 ff ff ff e9 13 fe ff ff 66 0f 1f
RIP ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
---[ end trace c8aa0c8180e869dc ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
This issue can be reproduced every week in a production environment.
This issue is related to the usage mode. If others use ocfs2 in this
mode, the kernel will panic frequently.
[akpm@linux-foundation.org: coding style fixes]
[Fix new warning due to unused function by removing said function - Linus ]
Link: http://lkml.kernel.org/r/1568772175-2906-2-git-send-email-sunny.s.zhang@oracle.com
Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have a usecase to use tmpfs as QEMU memory backend and we would like
to take the advantage of THP as well. But, our test shows the EPT is
not PMD mapped even though the underlying THP are PMD mapped on host.
The number showed by /sys/kernel/debug/kvm/largepage is much less than
the number of PMD mapped shmem pages as the below:
7f2778200000-7f2878200000 rw-s 00000000 00:14 262232 /dev/shm/qemu_back_mem.mem.Hz2hSf (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 579584 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
12
And some benchmarks do worse than with anonymous THPs.
By digging into the code we figured out that commit 127393fbe5 ("mm:
thp: kvm: fix memory corruption in KVM with THP enabled") checks if
there is a single PTE mapping on the page for anonymous THP when setting
up EPT map. But the _mapcount < 0 check doesn't work for page cache THP
since every subpage of page cache THP would get _mapcount inc'ed once it
is PMD mapped, so PageTransCompoundMap() always returns false for page
cache THP. This would prevent KVM from setting up PMD mapped EPT entry.
So we need handle page cache THP correctly. However, when page cache
THP's PMD gets split, kernel just remove the map instead of setting up
PTE map like what anonymous THP does. Before KVM calls get_user_pages()
the subpages may get PTE mapped even though it is still a THP since the
page cache THP may be mapped by other processes at the mean time.
Checking its _mapcount and whether the THP has PTE mapped or not.
Although this may report some false negative cases (PTE mapped by other
processes), it looks not trivial to make this accurate.
With this fix /sys/kernel/debug/kvm/largepage would show reasonable
pages are PMD mapped by EPT as the below:
7fbeaee00000-7fbfaee00000 rw-s 00000000 00:14 275464 /dev/shm/qemu_back_mem.mem.SKUvat (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 557056 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
271
And the benchmarks are as same as anonymous THPs.
[yang.shi@linux.alibaba.com: v4]
Link: http://lkml.kernel.org/r/1571865575-42913-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1571769577-89735-1-git-send-email-yang.shi@linux.alibaba.com
Fixes: dd78fedde4 ("rmap: support file thp")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Gang Deng <gavin.dg@linux.alibaba.com>
Tested-by: Gang Deng <gavin.dg@linux.alibaba.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list. As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.
This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone. A private report indicated that kernel build
times were excessive with extremely high system CPU usage. A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.
This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system. It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.
mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.
kernbench
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Amean user-256 13249.50 ( 0.00%) 16401.31 * -23.79%*
Amean syst-256 14760.30 ( 0.00%) 4448.39 * 69.86%*
Amean elsp-256 162.42 ( 0.00%) 119.13 * 26.65%*
Stddev user-256 42.97 ( 0.00%) 19.15 ( 55.43%)
Stddev syst-256 336.87 ( 0.00%) 6.71 ( 98.01%)
Stddev elsp-256 2.46 ( 0.00%) 0.39 ( 84.03%)
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Duration User 39766.24 49221.79
Duration System 44298.10 13361.67
Duration Elapsed 519.11 388.87
The patch reduces system CPU usage by 69.86% and total build time by
26.65%. The variance of system CPU usage is also much reduced.
Before, this was the breakdown of batch and high values over all zones
was:
256 batch: 1
256 batch: 63
512 batch: 7
256 high: 0
256 high: 378
512 high: 42
512 pcpu pagesets had a batch limit of 7 and a high limit of 42. After
the patch:
256 batch: 1
768 batch: 63
256 high: 0
768 high: 378
[mgorman@techsingularity.net: fix merge/linkage snafu]
Link: http://lkml.kernel.org/r/20191023084705.GD3016@techsingularity.netLink: http://lkml.kernel.org/r/20191021094808.28824-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org> [4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The MAP_HUGETLB ("-H" option) of gup_benchmark fails:
$ sudo ./gup_benchmark -H
mmap: Invalid argument
This is because gup_benchmark.c is passing in a file descriptor to
mmap(), but the fd came from opening up the /dev/zero file. This
confuses the mmap syscall implementation, which thinks that, if the
caller did not specify MAP_ANONYMOUS, then the file must be a huge page
file. So it attempts to verify that the file really is a huge page
file, as you can see here:
ksys_mmap_pgoff()
{
if (!(flags & MAP_ANONYMOUS)) {
retval = -EINVAL;
if (unlikely(flags & MAP_HUGETLB && !is_file_hugepages(file)))
goto out_fput; /* THIS IS WHERE WE END UP */
else if (flags & MAP_HUGETLB) {
...proceed normally, /dev/zero is ok here...
...and of course is_file_hugepages() returns "false" for the /dev/zero
file.
The problem is that the user space program, gup_benchmark.c, really just
wants anonymous memory here. The simplest way to get that is to pass
MAP_ANONYMOUS whenever MAP_HUGETLB is specified, so that's what this
patch does.
Link: http://lkml.kernel.org/r/20191021212435.398153-2-jhubbard@nvidia.com
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXcGMxwAKCRCRxhvAZXjc
otEzAP9lHvP97TtRG9gP6dj6YovZ5Djdo3IscmkTqy5Nt8sVNQD+NWg1LZnSMFdJ
ExETgRVlsjF8q2sblswtn/8Ab53O6AM=
=RVGl
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull clone3 stack argument update from Christian Brauner:
"This changes clone3() to do basic stack validation and to set up the
stack depending on whether or not it is growing up or down.
With clone3() the expectation is now very simply that the .stack
argument points to the lowest address of the stack and that
.stack_size specifies the initial stack size. This is diferent from
legacy clone() where the "stack" argument had to point to the lowest
or highest address of the stack depending on the architecture.
clone3() was released with 5.3. Currently, it is not documented and
very unclear to userspace how the stack and stack_size argument have
to be passed. After talking to glibc folks we concluded that changing
clone3() to determine stack direction and doing basic validation is
the right course of action.
Note, this is a potentially user visible change. In the very unlikely
case, that it breaks someone's use-case we will revert. (And then e.g.
place the new behavior under an appropriate flag.)
Note that passing an empty stack will continue working just as before.
Breaking someone's use-case is very unlikely. Neither glibc nor musl
currently expose a wrapper for clone3(). There is currently also no
real motivation for anyone to use clone3() directly. First, because
using clone{3}() with stacks requires some assembly (see glibc and
musl). Second, because it does not provide features that legacy
clone() doesn't. New features for clone3() will first happen in v5.5
which is why v5.4 is still a good time to try and make that change now
and backport it to v5.3.
I did a codesearch on https://codesearch.debian.net, github, and
gitlab and could not find any software currently relying directly on
clone3(). I expect this to change once we land CLONE_CLEAR_SIGHAND
which was a request coming from glibc at which point they'll likely
start using it"
* tag 'for-linus-2019-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
clone3: validate stack arguments
- Fix a build error in the tools used for kselftest.
- A series of reverts to bring the Intel Merrifield back to
working. We will likely unrevert the reverts for v5.5
but we can't have v5.4 broken.
-----BEGIN PGP SIGNATURE-----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=ml6d
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"More GPIO fixes! We found a late regression in the Intel Merrifield
driver. Oh well. We fixed it up.
- Fix a build error in the tools used for kselftest
- A series of reverts to bring the Intel Merrifield back to working.
We will likely unrevert the reverts for v5.5 but we can't have v5.4
broken"
* tag 'gpio-v5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
Revert "gpio: merrifield: Pass irqchip when adding gpiochip"
Revert "gpio: merrifield: Restore use of irq_base"
Revert "gpio: merrifield: Move hardware initialization to callback"
tools: gpio: Use !building_out_of_srctree to determine srctree
Validate the stack arguments and setup the stack depening on whether or not
it is growing down or up.
Legacy clone() required userspace to know in which direction the stack is
growing and pass down the stack pointer appropriately. To make things more
confusing microblaze uses a variant of the clone() syscall selected by
CONFIG_CLONE_BACKWARDS3 that takes an additional stack_size argument.
IA64 has a separate clone2() syscall which also takes an additional
stack_size argument. Finally, parisc has a stack that is growing upwards.
Userspace therefore has a lot nasty code like the following:
#define __STACK_SIZE (8 * 1024 * 1024)
pid_t sys_clone(int (*fn)(void *), void *arg, int flags, int *pidfd)
{
pid_t ret;
void *stack;
stack = malloc(__STACK_SIZE);
if (!stack)
return -ENOMEM;
#ifdef __ia64__
ret = __clone2(fn, stack, __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#elif defined(__parisc__) /* stack grows up */
ret = clone(fn, stack, flags | SIGCHLD, arg, pidfd);
#else
ret = clone(fn, stack + __STACK_SIZE, flags | SIGCHLD, arg, pidfd);
#endif
return ret;
}
or even crazier variants such as [3].
With clone3() we have the ability to validate the stack. We can check that
when stack_size is passed, the stack pointer is valid and the other way
around. We can also check that the memory area userspace gave us is fine to
use via access_ok(). Furthermore, we probably should not require
userspace to know in which direction the stack is growing. It is easy
for us to do this in the kernel and I couldn't find the original
reasoning behind exposing this detail to userspace.
/* Intentional user visible API change */
clone3() was released with 5.3. Currently, it is not documented and very
unclear to userspace how the stack and stack_size argument have to be
passed. After talking to glibc folks we concluded that trying to change
clone3() to setup the stack instead of requiring userspace to do this is
the right course of action.
Note, that this is an explicit change in user visible behavior we introduce
with this patch. If it breaks someone's use-case we will revert! (And then
e.g. place the new behavior under an appropriate flag.)
Breaking someone's use-case is very unlikely though. First, neither glibc
nor musl currently expose a wrapper for clone3(). Second, there is no real
motivation for anyone to use clone3() directly since it does not provide
features that legacy clone doesn't. New features for clone3() will first
happen in v5.5 which is why v5.4 is still a good time to try and make that
change now and backport it to v5.3. Searches on [4] did not reveal any
packages calling clone3().
[1]: https://lore.kernel.org/r/CAG48ez3q=BeNcuVTKBN79kJui4vC6nw0Bfq6xc-i0neheT17TA@mail.gmail.com
[2]: https://lore.kernel.org/r/20191028172143.4vnnjpdljfnexaq5@wittgenstein
[3]: 5238e95759/src/basic/raw-clone.h (L31)
[4]: https://codesearch.debian.net
Fixes: 7f192e3cd3 ("fork: add clone3")
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-api@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 5.3
Cc: GNU C Library <libc-alpha@sourceware.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Link: https://lore.kernel.org/r/20191031113608.20713-1-christian.brauner@ubuntu.com
This reverts commit 8f86a5b4ad.
It has been established that this causes a boot regression on
both Baytrail and Cherrytrail SoCs, and we can't have that in
the final kernel release, so we need to revert it.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit 6658f87f21.
This revert is a prerequisite for the later revert of commit
8f86a5b4ad.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit 4c87540940.
This revert is a prerequisite for the later revert of commit
8f86a5b4ad.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The USB sub-maintainers woke up this past week and sent a bunch of tiny
fixes. Here are a lot of small patches that that resolve a bunch of
reported issues in the USB core, drivers, serial drivers, gadget
drivers, and of course, xhci :)
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXb7SXg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylCyQCgleuRSWwpH3QVRvCXpT/kxqXPkEQAn0ct2ZOi
oInjMIDpRJ+EuEithFOI
=P61y
-----END PGP SIGNATURE-----
Merge tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"The USB sub-maintainers woke up this past week and sent a bunch of
tiny fixes. Here are a lot of small patches that that resolve a bunch
of reported issues in the USB core, drivers, serial drivers, gadget
drivers, and of course, xhci :)
All of these have been in linux-next with no reported issues"
* tag 'usb-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (31 commits)
usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
usb: cdns3: gadget: Fix g_audio use case when connected to Super-Speed host
usb: cdns3: gadget: reset EP_CLAIMED flag while unloading
USB: serial: whiteheat: fix line-speed endianness
USB: serial: whiteheat: fix potential slab corruption
USB: gadget: Reject endpoints with 0 maxpacket value
UAS: Revert commit 3ae62a4209 ("UAS: fix alignment of scatter/gather segments")
usb-storage: Revert commit 747668dbc0 ("usb-storage: Set virt_boundary_mask to avoid SG overflows")
usbip: Fix free of unallocated memory in vhci tx
usbip: tools: Fix read_usb_vudc_device() error path handling
usb: xhci: fix __le32/__le64 accessors in debugfs code
usb: xhci: fix Immediate Data Transfer endianness
xhci: Fix use-after-free regression in xhci clear hub TT implementation
USB: ldusb: fix control-message timeout
USB: ldusb: use unsigned size format specifiers
USB: ldusb: fix ring-buffer locking
USB: Skip endpoints with 0 maxpacket length
usb: cdns3: gadget: Don't manage pullups
usb: dwc3: remove the call trace of USBx_GFLADJ
usb: gadget: configfs: fix concurrent issue between composite APIs
...
-----BEGIN PGP SIGNATURE-----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=Oh9N
-----END PGP SIGNATURE-----
Merge tag '5.4-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"A small smb3 memleak fix"
* tag '5.4-rc6-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
fix memory leak in large read decrypt offload
It turned out that relying solely on drivers storing all the PWM state
in hardware was a little premature and causes a number of subtle (and
some not so subtle) regressions. Revert the offending patch for now.
-----BEGIN PGP SIGNATURE-----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=Hf3E
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm fixes from Thierry Reding:
"It turned out that relying solely on drivers storing all the PWM state
in hardware was a little premature and causes a number of subtle (and
some not so subtle) regressions. Revert the offending patch for now"
* tag 'pwm/for-5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
Revert "pwm: Let pwm_get_state() return the last implemented state"
Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4]
and one core change in sd that fixes an I/O failure on DIF type 3
devices.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXbzO+iYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYOpAP9/BCSY
2TAFlli2rVQe+ZNjhHcE4Gj92HNPO7ZgvDQvWgD9F184tjG+1pntYGFutoso7Ak6
QimtBw4AuYg9eDKJDKU=
=bQRX
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine changes, eight in drivers [ufs, target, lpfc x 2, qla2xxx x 4]
and one core change in sd that fixes an I/O failure on DIF type 3
devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: stop timer in shutdown path
scsi: sd: define variable dif as unsigned int instead of bool
scsi: target: cxgbit: Fix cxgbit_fw4_ack()
scsi: qla2xxx: Fix partial flash write of MBI
scsi: qla2xxx: Initialized mailbox to prevent driver load failure
scsi: lpfc: Honor module parameter lpfc_use_adisc
scsi: ufs-bsg: Wake the device before sending raw upiu commands
scsi: lpfc: Check queue pointer before use
scsi: qla2xxx: fixup incorrect usage of host_byte
Our recent cleanup of EEH led to an oops on bare metal machines when the cxl
(CAPI) driver creates virtual devices for an attached FPGA accelerator.
The "secure virtual machine" support we added in v5.4 had a bug if the kernel
was relocated (moved during boot), in those cases the signature of the kernel
text wouldn't verify and the Ultravisor would refuse to run the VM.
A recent change to disable interrupts before calling arch_cpu_idle_dead() caused
a WARN_ON() in our bare metal CPU offline code to always trigger.
The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the address
range crossed a segment (256MB) boundary which could lead to spurious faults.
Thanks to:
Christophe Leroy, Frederic Barrat, Michael Anderson, Nicholas Piggin, Sam
Bobroff, Thiago Jung Bauermann.
-----BEGIN PGP SIGNATURE-----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=W7+c
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Our recent cleanup of EEH led to an oops on bare metal machines when
the cxl (CAPI) driver creates virtual devices for an attached FPGA
accelerator.
The "secure virtual machine" support we added in v5.4 had a bug if the
kernel was relocated (moved during boot), in those cases the signature
of the kernel text wouldn't verify and the Ultravisor would refuse to
run the VM.
A recent change to disable interrupts before calling
arch_cpu_idle_dead() caused a WARN_ON() in our bare metal CPU offline
code to always trigger.
The KUAP (SMAP) support we added for 32-bit Book3S had a bug if the
address range crossed a segment (256MB) boundary which could lead to
spurious faults.
Thanks to: Christophe Leroy, Frederic Barrat, Michael Anderson,
Nicholas Piggin, Sam Bobroff, Thiago Jung Bauermann"
* tag 'powerpc-5.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv: Fix CPU idle to be called with IRQs disabled
powerpc/prom_init: Undo relocation before entering secure mode
powerpc/powernv/eeh: Fix oops when probing cxl devices
powerpc/32s: fix allow/prevent_user_access() when crossing segment boundaries.
- Fix cpu idle time accounting.
- Fix stack unwinder case when both pt_regs and sp are specified.
- Fix information leak via cmm timeout proc handler.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl29VyIACgkQjYWKoQLX
FBic7wf9Gs0O6ffe5rfcrkRLVIeFGvcIWyYS0ktDrwnhN6uCwJvRbiNSANJgwo9c
okurpJ3vlkst2rn9bwxYSaz+E8QnuWxP9232qXWDn1fWJm1QjSJ8HP0l4IS0smtR
gBTiPKzOQKa/F0Cspmm3xUdOH/frDbgJyE5pPTloz48K99V8Lz9Y+vEJHPRCx5uc
enwaGIDuWvzzRrY9/uC1+MbIaE8VP1X7fUoZ7698gx9q9wc2BrvHPeyJDQZTSYSW
J+sKdeqnmwLGNr22O6Vo/c19lKFwZhFDKSKFRSCfoCnhOxTBryI09Ou+Dtnl/KTK
AcIZ+ET+uS3TqqGCEIlVKKHZmO515A==
=Ktrj
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix cpu idle time accounting
- Fix stack unwinder case when both pt_regs and sp are specified
- Fix information leak via cmm timeout proc handler
* tag 's390-5.4-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/idle: fix cpu idle time calculation
s390/unwind: fix mixing regs and sp
s390/cmm: fix information leak in cmm_timeout_handler()
Pull networking fixes from David Miller:
1) Fix free/alloc races in batmanadv, from Sven Eckelmann.
2) Several leaks and other fixes in kTLS support of mlx5 driver, from
Tariq Toukan.
3) BPF devmap_hash cost calculation can overflow on 32-bit, from Toke
Høiland-Jørgensen.
4) Add an r8152 device ID, from Kazutoshi Noguchi.
5) Missing include in ipv6's addrconf.c, from Ben Dooks.
6) Use siphash in flow dissector, from Eric Dumazet. Attackers can
easily infer the 32-bit secret otherwise etc.
7) Several netdevice nesting depth fixes from Taehee Yoo.
8) Fix several KCSAN reported errors, from Eric Dumazet. For example,
when doing lockless skb_queue_empty() checks, and accessing
sk_napi_id/sk_incoming_cpu lockless as well.
9) Fix jumbo packet handling in RXRPC, from David Howells.
10) Bump SOMAXCONN and tcp_max_syn_backlog values, from Eric Dumazet.
11) Fix DMA synchronization in gve driver, from Yangchun Fu.
12) Several bpf offload fixes, from Jakub Kicinski.
13) Fix sk_page_frag() recursion during memory reclaim, from Tejun Heo.
14) Fix ping latency during high traffic rates in hisilicon driver, from
Jiangfent Xiao.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits)
net: fix installing orphaned programs
net: cls_bpf: fix NULL deref on offload filter removal
selftests: bpf: Skip write only files in debugfs
selftests: net: reuseport_dualstack: fix uninitalized parameter
r8169: fix wrong PHY ID issue with RTL8168dp
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
net: phylink: Fix phylink_dbg() macro
gve: Fixes DMA synchronization.
inet: stop leaking jiffies on the wire
ixgbe: Remove duplicate clear_bit() call
Documentation: networking: device drivers: Remove stray asterisks
e1000: fix memory leaks
i40e: Fix receive buffer starvation for AF_XDP
igb: Fix constant media auto sense switching when no cable is connected
net: ethernet: arc: add the missed clk_disable_unprepare
igb: Enable media autosense for the i350.
igb/igc: Don't warn on fatal read failures when the device is removed
tcp: increase tcp_max_syn_backlog max value
net: increase SOMAXCONN to 4096
netdevsim: Fix use-after-free during device dismantle
...
Stable bugfixes:
- Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
Other fixes:
- The TCP back channel mustn't disappear while requests are outstanding
- The RDMA back channel mustn't disappear while requests are outstanding
- Destroy the back channel when we destroy the host transport
- Don't allow a cached open with a revoked delegation
-----BEGIN PGP SIGNATURE-----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=ttcU
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"This contains two delegation fixes (with the RCU lock leak fix marked
for stable), and three patches to fix destroying the the sunrpc back
channel.
Stable bugfixes:
- Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
Other fixes:
- The TCP back channel mustn't disappear while requests are
outstanding
- The RDMA back channel mustn't disappear while requests are
outstanding
- Destroy the back channel when we destroy the host transport
- Don't allow a cached open with a revoked delegation"
* tag 'nfs-for-5.4-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Fix an RCU lock leak in nfs4_refresh_delegation_stateid()
NFSv4: Don't allow a cached open with a revoked delegation
SUNRPC: Destroy the back channel when we destroy the host transport
SUNRPC: The RDMA back channel mustn't disappear while requests are outstanding
SUNRPC: The TCP back channel mustn't disappear while requests are outstanding
-----BEGIN PGP SIGNATURE-----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=+rar
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20191101' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Two small nvme fixes, one is a fabrics connection fix, the other one
a cleanup made possible by that fix (Anton, via Keith)
- Fix requeue handling in umb ubd (Anton)
- Fix spin_lock_irq() nesting in blk-iocost (Dan)
- Three small io_uring fixes:
- Install io_uring fd after done with ctx (me)
- Clear ->result before every poll issue (me)
- Fix leak of shadow request on error (Pavel)
* tag 'for-linus-20191101' of git://git.kernel.dk/linux-block:
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
One fix for PCIe users:
- Fix legacy PCI I/O port access emulation
One set of cleanups:
- Resolve most of the warnings generated by sparse across arch/riscv.
No functional changes
And one MAINTAINERS update:
- Update Palmer's E-mail address
-----BEGIN PGP SIGNATURE-----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=hkRB
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"One fix for PCIe users:
- Fix legacy PCI I/O port access emulation
One set of cleanups:
- Resolve most of the warnings generated by sparse across arch/riscv.
No functional changes
And one MAINTAINERS update:
- Update Palmer's E-mail address"
* tag 'riscv/for-v5.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Change to my personal email address
RISC-V: Add PCIe I/O BAR memory mapping
riscv: for C functions called only from assembly, mark with __visible
riscv: fp: add missing __user pointer annotations
riscv: add missing header file includes
riscv: mark some code and data as file-static
riscv: init: merge split string literals in preprocessor directive
riscv: add prototypes for assembly language functions from head.S
Pull parisc fix from Helge Deller:
"Fix a parisc kernel crash with ftrace functions when compiled without
frame pointers"
* 'parisc-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix frame pointer in ftrace_regs_caller()
Jakub Kicinski says:
====================
fix BPF offload related bugs
test_offload.py catches some recently added bugs.
First of a bug in test_offload.py itself after recent changes
to netdevsim is fixed.
Second patch fixes a bug in cls_bpf, and last one addresses
a problem with the recently added XDP installation optimization.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When netdevice with offloaded BPF programs is destroyed
the programs are orphaned and removed from the program
IDA - their IDs get released (the programs may remain
accessible via existing open file descriptors and pinned
files). After IDs are released they are set to 0.
This confuses dev_change_xdp_fd() because it compares
the __dev_xdp_query() result where 0 means no program
with prog->aux->id where 0 means orphaned.
dev_change_xdp_fd() would have incorrectly returned success
even though it had not installed the program.
Since drivers already catch this case via bpf_offload_dev_match()
let them handle this case. The error message drivers produce in
this case ("program loaded for a different device") is in fact
correct as the orphaned program must had to be loaded for a
different device.
Fixes: c14a9f633d ("net: Don't call XDP_SETUP_PROG when nothing is changed")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4011921137 ("net: sched: refactor block offloads counter
usage") missed the fact that either new prog or old prog may be
NULL.
Fixes: 4011921137 ("net: sched: refactor block offloads counter usage")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DebugFS for netdevsim now contains some "action trigger" files
which are write only. Don't try to capture the contents of those.
Note that we can't use os.access() because the script requires
root.
Fixes: 4418f862d6 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.
Fixes: d6a61f80b8 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.
[0] https://bbs.archlinux.org/viewtopic.php?id=246508
Fixes: 242cd9b586 ("r8169: use phy_resume/phy_suspend")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes: 9f91484f6f ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG)
and as a result, it spams the kernel log since a PR_DEBUG level is
currently used. Fix it to be defined appropriately whether
CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set.
Fixes: 17091180b1 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: Yangchun Fu <yangchun@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.
RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.
Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.
Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.
Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thiemo Nagel <tnagel@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
