We want to store in persistent meta data what the peer DRBD can handle,
which, due to spreading requests to multiple bios,
may be more than its backing device can handle.
Otherwise, if a disconnected Primary temporarily loses access to its local data
as well, we may accidentally shrink the max-bio setting, portentially causing
already assembled, but not yet processed, application bios to be spuriously
failed due to device limits.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In the drbd make request function, specifically in
drbd_send_and_submit(), we decide whether we want to send the actual
write request, or only a "set this block out of sync" information.
We do so based on the current connection state, while holding the req_lock.
The connection state is not supposed to change while holding the req_lock.
But in drbd_start_resync, we did change that state anyways,
while only holding the global_state_lock, which is enough to change
sync-after dependencies (paused vs active resync), but
not good enough to change the connection state.
Fix: in drbd_start_resync, first grab the req_lock to serialize with
drbd_send_and_submit(), before grabbing the global_state_lock
to be able to evaluate the sync-after dependencies.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Allow the user of REQ_DISCARD.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Note that I do NOT call __drbd_chk_io_error for failed REQ_DISCARD.
That may be wrong, though, or needs to differ between EOPNOTSUPP and
other errors...
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If the receiver needs to serve a discard request on a queue that does
not announce to be discard cabable, it falls back to do synchronous
blkdev_issue_zeroout().
We expect only "reasonably" large (up to one activity log extent?)
discard requests.
We do this to not to not block the receiver for too long in this
fallback code path, and to not set/clear too many bits inside one
spinlock_irq_save() in drbd_set_in_sync/drbd_set_out_of_sync,
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We plan to use genl_family->parallel_ops = true in the future,
but need to review all possible interactions first.
For now, only selectively drop genl_lock() in drbd_set_role(),
instead serializing on our own internal resource->conf_update mutex.
We now can be promoted/demoted on many resources in parallel,
which may significantly improve cluster failover times
when fencing is required.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Because all administrative requests via genetlink have been globally
serialized via genl_lock(), we used to have one static struct
drbd_config_context "admin context".
Move this on-stack to the respective callback functions.
This will allow us to selectively drop the genl_lock()
(or use genl_family->parallel_ops) in the future.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a 'cluster wide' disconnect executes, the result comes back
from the peer, and immediately after that the connection breaks
then _conn_rq_cond() reported back SS_CW_SUCCESS.
Therefore _conn_request_state() calls conn_set_state(), which
has a BUG() in it.
The BUG() is hit because conn_is_valid_transition() does not like
the transaction. Which goes back to is_valid_soft_transition()
returning SS_OUTDATE_WO_CONN.
This fix is to consider an error reported by is_valid_soft_transition()
even when the peer agreed to the transaction.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Before, application IO could pre-empt resync activity
for up to hardcoded 20 seconds per resync request.
A very busy server could throttle the effective resync bandwidth
down to one request per 20 seconds.
Now, we only let application IO pre-empt resync traffic
while the current resync rate estimate is above c-min-rate.
If you disable the c-min-rate throttle feature (set c-min-rate = 0),
application IO will no longer pre-empt resync traffic at all.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If max-buffers and socket buffer sizes are "too small" for the chosen
resync rate, this could lead potentially lead to a distributed deadlock,
which may or may not resolve itself via the "ko-count" and request
timeout mechanism, or could be resolved by forced disconnect.
One option to deal with this is proper configuration:
use larger max-buffer and socket buffers settings,
or reduce the resync rate.
But even with bad configuration we should not deadlock,
but "gracefully" recover.
The issue is avoided by using only up to max-buffers/2 for resync
requests, and by using max-buffers not as a hard limit for data buffer
allocations, but as a throttle threshold only.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
While merging adjacent dirty blocks into resync requests,
the resync rate throttle was disregarded.
For very low resync rates, the effective rate may have exceeded
the intended rate by a larger margin.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If we don't make resync or verify progress for "too long",
we want to flag it as "stalled".
Since 2010, "use rolling marks for resync speed calculation"
this "too long" was wrong by a factor of HZ.
With HZ 250, it would have been flagged as stalled
after 100 minutes.
Hardcode 3 minutes instead.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If a user forces the operation he takes the blame in case
the peer does not have enough space. No reason to dey this...
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Actually we are clearing the susp_fen flag if we are not going
to call a fencing handler.
For setting the susp_fen flag needs to be edge-triggerd, and not
level triggered.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When we need to outdate the peer while being promoted to primary,
and the connection gets established at the same time, we deadlock
in drbd_try_outdate_peer() when trying to clear the susp_fen
bit.
Fix this by setting the STATE_SENT bit while holding the mutex.
Using drbd_change_state(.. , CS_HARD, ..) which does not block
until STATE_SENT is cleared, is only for clearness. It does
not contribute anything to the fix.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A hardware quirk in P320h/P420m interfere with PCIe transactions on some
AMD chipsets, making P320h/P420m unusable. This workaround is to disable
ERO and NoSnoop bits in the parent and root complex for normal
functioning of these devices
NOTE: This workaround is specific to AMD chipset with a PCIe upstream
device with device id 0x5aXX
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
In module exit, dfs_parent and it's subtree were removed before
unregistering with pci. When debugfs entry for each device is attempted
to remove in pci_remove() context, they don't exist, as dfs_parent and
its children were already ripped apart.
Modified to first unregister with pci and then remove dfs_parent.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Cc: stable@kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: iss_storagedev@hp.com
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Function pci_enable_msix_exact() is a variation of
pci_enable_msix_range() that allows a device driver
to request a particular number of MSI-X interrupts,
rather than any number within a specified range.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a new blk_mq_tag_set structure that gets set up before we initialize
the queue. A single blk_mq_tag_set structure can be shared by multiple
queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modular export of blk_mq_{alloc,free}_tagset added by me.
Signed-off-by: Jens Axboe <axboe@fb.com>
The current blk_mq_init_commands/blk_mq_free_commands interface has a
two problems:
1) Because only the constructor is passed to blk_mq_init_commands there
is no easy way to clean up when a comman initialization failed. The
current code simply leaks the allocations done in the constructor.
2) There is no good place to call blk_mq_free_commands: before
blk_cleanup_queue there is no guarantee that all outstanding
commands have completed, so we can't free them yet. After
blk_cleanup_queue the queue has usually been freed. This can be
worked around by grabbing an unconditional reference before calling
blk_cleanup_queue and dropping it after blk_mq_free_commands is
done, although that's not exatly pretty and driver writers are
guaranteed to get it wrong sooner or later.
Both issues are easily fixed by making the request constructor and
destructor normal blk_mq_ops methods.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Drivers can reach their private data easily using the blk_mq_rq_to_pdu
helper and don't need req->special. By not initializing it code can
be simplified nicely, and we also shave off a few more instructions from
the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This was used in the olden days, back when onions were proper
yellow. Basically it mapped to the current buffer to be
transferred. With highmem being added more than a decade ago,
most drivers map pages out of a bio, and rq->buffer isn't
pointing at anything valid.
Convert old style drivers to just use bio_data().
For the discard payload use case, just reference the page
in the bio.
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull vfs updates from Al Viro:
"The first vfs pile, with deep apologies for being very late in this
window.
Assorted cleanups and fixes, plus a large preparatory part of iov_iter
work. There's a lot more of that, but it'll probably go into the next
merge window - it *does* shape up nicely, removes a lot of
boilerplate, gets rid of locking inconsistencie between aio_write and
splice_write and I hope to get Kent's direct-io rewrite merged into
the same queue, but some of the stuff after this point is having
(mostly trivial) conflicts with the things already merged into
mainline and with some I want more testing.
This one passes LTP and xfstests without regressions, in addition to
usual beating. BTW, readahead02 in ltp syscalls testsuite has started
giving failures since "mm/readahead.c: fix readahead failure for
memoryless NUMA nodes and limit readahead pages" - might be a false
positive, might be a real regression..."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
missing bits of "splice: fix racy pipe->buffers uses"
cifs: fix the race in cifs_writev()
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure
kill generic_file_buffered_write()
ocfs2_file_aio_write(): switch to generic_perform_write()
ceph_aio_write(): switch to generic_perform_write()
xfs_file_buffered_aio_write(): switch to generic_perform_write()
export generic_perform_write(), start getting rid of generic_file_buffer_write()
generic_file_direct_write(): get rid of ppos argument
btrfs_file_aio_write(): get rid of ppos
kill the 5th argument of generic_file_buffered_write()
kill the 4th argument of __generic_file_aio_write()
lustre: don't open-code kernel_recvmsg()
ocfs2: don't open-code kernel_recvmsg()
drbd: don't open-code kernel_recvmsg()
constify blk_rq_map_user_iov() and friends
lustre: switch to kernel_sendmsg()
ocfs2: don't open-code kernel_sendmsg()
take iov_iter stuff to mm/iov_iter.c
process_vm_access: tidy up a bit
...
Pull NVMe driver updates from Matthew Wilcox:
"Various updates to the NVMe driver. The most user-visible change is
that drive hotplugging now works and CPU hotplug while an NVMe drive
is installed should also work better"
* git://git.infradead.org/users/willy/linux-nvme:
NVMe: Retry failed commands with non-fatal errors
NVMe: Add getgeo to block ops
NVMe: Start-stop nvme_thread during device add-remove.
NVMe: Make I/O timeout a module parameter
NVMe: CPU hot plug notification
NVMe: per-cpu io queues
NVMe: Replace DEFINE_PCI_DEVICE_TABLE
NVMe: Fix divide-by-zero in nvme_trans_io_get_num_cmds
NVMe: IOCTL path RCU protect queue access
NVMe: RCU protected access to io queues
NVMe: Initialize device reference count earlier
NVMe: Add CONFIG_PM_SLEEP to suspend/resume functions
For commands returned with failed status, queue these for resubmission
and continue retrying them until success or for a limited amount of
time. The final timeout was arbitrarily chosen so requests can't be
retried indefinitely.
Since these are requeued on the nvmeq that submitted the command, the
callbacks have to take an nvmeq instead of an nvme_dev as a parameter
so that we can use the locked queue to append the iod to retry later.
The nvme_iod conviently can be used to track how long we've been trying
to successfully complete an iod request. The nvme_iod also provides the
nvme prp dma mappings, so I had to move a few things around so we can
keep those mappings.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[fixed checkpatch issue with long line]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Some programs require HDIO_GETGEO work, which requires we implement
getgeo.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Done to ensure nvme_thread is not running when there
are no devices to poll.
Signed-off-by: Dan McLeran <daniel.mcleran@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Increase the default timeout to 30 seconds to match SCSI.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[use byte instead of ushort]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Registers with hot cpu notification to rebalance, and potentially allocate
additional, io queues.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
The device's IO queues are associated with CPUs, so we can use a per-cpu
variable to map the a qid to a cpu. This provides a convienient way
to optimally assign queues to multiple cpus when the device supports
fewer queues than the host has cpus. The previous implementation may
have assigned these poorly in these situations. This patch addresses
this by sharing queues among cpus that are "close" together and should
have a lower lock contention penalty.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Pull block layer fixes from Jens Axboe:
"A small collection of fixes that should go in before -rc1. The pull
request contains:
- A two patch fix for a regression with block enabled tagging caused
by a commit in the initial pull request. One patch is from Martin
and ensures that SCSI doesn't truncate 64-bit block flags, the
other one is from me and prevents us from double using struct
request queuelist for both completion and busy tags. This caused
anything from a boot crash for some, to crashes under load.
- A blk-mq fix for a potential soft stall when hot unplugging CPUs
with busy IO.
- percpu_counter fix is listed in here, that caused a suspend issue
with virtio-blk due to percpu counters having an inconsistent state
during CPU removal. Andrew sent this in separately a few days ago,
but it's here. JFYI.
- A few fixes for block integrity from Martin.
- A ratelimit fix for loop from Mike Galbraith, to avoid spewing too
much in error cases"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: fix regression with block enabled tagging
scsi: Make sure cmd_flags are 64-bit
block: Ensure we only enable integrity metadata for reads and writes
block: Fix integrity verification
block: Fix for_each_bvec()
drivers/block/loop.c: ratelimit error messages
blk-mq: fix potential stall during CPU unplug with IO pending
percpu_counter: fix bad counter state during suspend
Merge second patch-bomb from Andrew Morton:
- the rest of MM
- zram updates
- zswap updates
- exit
- procfs
- exec
- wait
- crash dump
- lib/idr
- rapidio
- adfs, affs, bfs, ufs
- cris
- Kconfig things
- initramfs
- small amount of IPC material
- percpu enhancements
- early ioremap support
- various other misc things
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits)
MAINTAINERS: update Intel C600 SAS driver maintainers
fs/ufs: remove unused ufs_super_block_third pointer
fs/ufs: remove unused ufs_super_block_second pointer
fs/ufs: remove unused ufs_super_block_first pointer
fs/ufs/super.c: add __init to init_inodecache()
doc/kernel-parameters.txt: add early_ioremap_debug
arm64: add early_ioremap support
arm64: initialize pgprot info earlier in boot
x86: use generic early_ioremap
mm: create generic early_ioremap() support
x86/mm: sparse warning fix for early_memremap
lglock: map to spinlock when !CONFIG_SMP
percpu: add preemption checks to __this_cpu ops
vmstat: use raw_cpu_ops to avoid false positives on preemption checks
slub: use raw_cpu_inc for incrementing statistics
net: replace __this_cpu_inc in route.c with raw_cpu_inc
modules: use raw_cpu_write for initialization of per cpu refcount.
mm: use raw_cpu ops for determining current NUMA node
percpu: add raw_cpu_ops
slub: fix leak of 'name' in sysfs_slab_add
...
zram is ram based block device and can be used by backend of filesystem.
When filesystem deletes a file, it normally doesn't do anything on data
block of that file. It just marks on metadata of that file. This
behavior has no problem on disk based block device, but has problems on
ram based block device, since we can't free memory used for data block.
To overcome this disadvantage, there is REQ_DISCARD functionality. If
block device support REQ_DISCARD and filesystem is mounted with discard
option, filesystem sends REQ_DISCARD to block device whenever some data
blocks are discarded. All we have to do is to handle this request.
This patch implements to flag up QUEUE_FLAG_DISCARD and handle this
REQ_DISCARD request. With it, we can free memory used by zram if it isn't
used.
[akpm@linux-foundation.org: tweak comments]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sysfs.txt documentation lists the following requirements:
- The buffer will always be PAGE_SIZE bytes in length. On i386, this
is 4096.
- show() methods should return the number of bytes printed into the
buffer. This is the return value of scnprintf().
- show() should always use scnprintf().
Use scnprintf() in show() functions.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we initialized zcomp with single, we couldn't change
max_comp_streams without zram reset but current interface doesn't show
any error to user and even it changes max_comp_streams's value without
any effect so it would make user very confusing.
This patch prevents max_comp_streams's change when zcomp was initialized
as single zcomp and emit the error to user(ex, echo).
[akpm@linux-foundation.org: don't return with the lock held, per Sergey]
[fengguang.wu@intel.com: fix coccinelle warnings]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of returning just NULL, return ERR_PTR from zcomp_create() if
compressing backend creation has failed. ERR_PTR(-EINVAL) for unsupported
compression algorithm request, ERR_PTR(-ENOMEM) for allocation (zcomp or
compression stream) error.
Perform IS_ERR() check of returned from zcomp_create() value in
disksize_store() and set return code to PTR_ERR().
Change suggested by Jerome Marchand.
[akpm@linux-foundation.org: clean up error recovery flow]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While fixing lockdep spew of ->init_lock reported by Sasha Levin [1],
Minchan Kim noted [2] that it's better to move compression backend
allocation (using GPF_KERNEL) out of the ->init_lock lock, same way as
with zram_meta_alloc(), in order to prevent the same lockdep spew.
[1] https://lkml.org/lkml/2014/2/27/337
[2] https://lkml.org/lkml/2014/3/3/32
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Sasha Levin <sasha.levin@oracle.com>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce LZ4 compression backend and make it available for selection.
LZ4 support is optional and requires user to set ZRAM_LZ4_COMPRESS config
option. The default compression backend is LZO.
TEST
(x86_64, core i5, 2 cores + 2 hyperthreading, zram disk size 1G,
ext4 file system, 3 compression streams)
iozone -t 3 -R -r 16K -s 60M -I +Z
Test LZO LZ4
----------------------------------------------
Initial write 1642744.62 1317005.09
Rewrite 2498980.88 1800645.16
Read 3957026.38 5877043.75
Re-read 3950997.38 5861847.00
Reverse Read 2937114.56 5047384.00
Stride read 2948163.19 4929587.38
Random read 3292692.69 4880793.62
Mixed workload 1545602.62 3502940.38
Random write 2448039.75 1758786.25
Pwrite 1670051.03 1338329.69
Pread 2530682.00 5097177.62
Fwrite 3232085.62 3275942.56
Fread 6306880.25 6645271.12
So on my system LZ4 is slower in write-only tests, while it performs
better in read-only and mixed (reads + writes) tests.
Official LZ4 benchmarks available here http://code.google.com/p/lz4/
(linux kernel uses revision r90).
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch allows to change max_comp_streams on initialised zcomp.
Introduce zcomp set_max_streams() knob, zcomp_strm_multi_set_max_streams()
and zcomp_strm_single_set_max_streams() callbacks to change streams limit
for zcomp_strm_multi and zcomp_strm_single, accordingly. set_max_streams
for single steam zcomp does nothing.
If user has lowered the limit, then zcomp_strm_multi_set_max_streams()
attempts to immediately free extra streams (as much as it can, depending
on idle streams availability).
Note, this patch does not allow to change stream 'policy' from single to
multi stream (or vice versa) on already initialised compression backend.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Existing zram (zcomp) implementation has only one compression stream
(buffer and algorithm private part), so in order to prevent data
corruption only one write (compress operation) can use this compression
stream, forcing all concurrent write operations to wait for stream lock
to be released. This patch changes zcomp to keep a compression streams
list of user-defined size (via sysfs device attr). Each write operation
still exclusively holds compression stream, the difference is that we
can have N write operations (depending on size of streams list)
executing in parallel. See TEST section later in commit message for
performance data.
Introduce struct zcomp_strm_multi and a set of functions to manage
zcomp_strm stream access. zcomp_strm_multi has a list of idle
zcomp_strm structs, spinlock to protect idle list and wait queue, making
it possible to perform parallel compressions.
The following set of functions added:
- zcomp_strm_multi_find()/zcomp_strm_multi_release()
find and release a compression stream, implement required locking
- zcomp_strm_multi_create()/zcomp_strm_multi_destroy()
create and destroy zcomp_strm_multi
zcomp ->strm_find() and ->strm_release() callbacks are set during
initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release()
correspondingly.
Each time zcomp issues a zcomp_strm_multi_find() call, the following set
of operations performed:
- spin lock strm_lock
- if idle list is not empty, remove zcomp_strm from idle list, spin
unlock and return zcomp stream pointer to caller
- if idle list is empty, current adds itself to wait queue. it will be
awaken by zcomp_strm_multi_release() caller.
zcomp_strm_multi_release():
- spin lock strm_lock
- add zcomp stream to idle list
- spin unlock, wake up sleeper
Minchan Kim reported that spinlock-based locking scheme has demonstrated
a severe perfomance regression for single compression stream case,
comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16)
base spinlock mutex
==Initial write ==Initial write ==Initial write
records: 5 records: 5 records: 5
avg: 1642424.35 avg: 699610.40 avg: 1655583.71
std: 39890.95(2.43%) std: 232014.19(33.16%) std: 52293.96
max: 1690170.94 max: 1163473.45 max: 1697164.75
min: 1568669.52 min: 573429.88 min: 1553410.23
==Rewrite ==Rewrite ==Rewrite
records: 5 records: 5 records: 5
avg: 1611775.39 avg: 501406.64 avg: 1684419.11
std: 17144.58(1.06%) std: 15354.41(3.06%) std: 18367.42
max: 1641800.95 max: 531356.78 max: 1706445.84
min: 1593515.27 min: 488817.78 min: 1655335.73
When only one compression stream available, mutex with spin on owner
tends to perform much better than frequent wait_event()/wake_up(). This
is why single stream implemented as a special case with mutex locking.
Introduce and document zram device attribute max_comp_streams. This
attr shows and stores current zcomp's max number of zcomp streams
(max_strm). Extend zcomp's zcomp_create() with `max_strm' parameter.
`max_strm' limits the number of zcomp_strm structs in compression
backend's idle list (max_comp_streams).
max_comp_streams used during initialisation as follows:
-- passing to zcomp_create() max_strm equals to 1 will initialise zcomp
using single compression stream zcomp_strm_single (mutex-based locking).
-- passing to zcomp_create() max_strm greater than 1 will initialise zcomp
using multi compression stream zcomp_strm_multi (spinlock-based locking).
default max_comp_streams value is 1, meaning that zram with single stream
will be initialised.
Later patch will introduce configuration knob to change max_comp_streams
on already initialised and used zcomp.
TEST
iozone -t 3 -R -r 16K -s 60M -I +Z
test base 1 strm (mutex) 3 strm (spinlock)
-----------------------------------------------------------------------
Initial write 589286.78 583518.39 718011.05
Rewrite 604837.97 596776.38 1515125.72
Random write 584120.11 595714.58 1388850.25
Pwrite 535731.17 541117.38 739295.27
Fwrite 1418083.88 1478612.72 1484927.06
Usage example:
set max_comp_streams to 4
echo 4 > /sys/block/zram0/max_comp_streams
show current max_comp_streams (default value is 1).
cat /sys/block/zram0/max_comp_streams
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is preparation patch to add multi stream support to zcomp.
Introduce struct zcomp_strm_single and a set of functions to manage
zcomp_strm stream access. zcomp_strm_single implements single compession
stream, same way as current zcomp implementation. This moves zcomp_strm
stream control and locking from zcomp, so compressing backend zcomp is not
aware of required locking.
Single and multi streams require different locking schemes. Minchan Kim
reported that spinlock-based locking scheme (which is used in multi stream
implementation) has demonstrated a severe perfomance regression for single
compression stream case, comparing to mutex-based. see
https://lkml.org/lkml/2014/2/18/16
The following set of functions added:
- zcomp_strm_single_find()/zcomp_strm_single_release()
find and release a compression stream, implement required locking
- zcomp_strm_single_create()/zcomp_strm_single_destroy()
create and destroy zcomp_strm_single
New ->strm_find() and ->strm_release() callbacks added to zcomp, which are
set to zcomp_strm_single_find() and zcomp_strm_single_release() during
initialisation. Instead of direct locking and zcomp_strm access from
zcomp_strm_find() and zcomp_strm_release(), zcomp now calls ->strm_find()
and ->strm_release() correspondingly.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ZRAM performs direct LZO compression algorithm calls, making it the one
and only option. While LZO is generally performs well, LZ4 algorithm
tends to have a faster decompression (see http://code.google.com/p/lz4/
for full report)
Name Ratio C.speed D.speed
MB/s MB/s
LZ4 (r101) 2.084 422 1820
LZO 2.06 2.106 414 600
Thus, users who have mostly read (decompress) usage scenarious or mixed
workflow (writes with relatively high read ops number) will benefit from
using LZ4 compression backend.
Introduce compressing backend abstraction zcomp in order to support
multiple compression algorithms with the following set of operations:
.create
.destroy
.compress
.decompress
Schematically zram write() usually contains the following steps:
0) preparation (decompression of partioal IO, etc.)
1) lock buffer_lock mutex (protects meta compress buffers)
2) compress (using meta compress buffers)
3) alloc and map zs_pool object
4) copy compressed data (from meta compress buffers) to object allocated by 3)
5) free previous pool page, assign a new one
6) unlock buffer_lock mutex
As we can see, compressing buffers must remain untouched from 1) to 4),
because, otherwise, concurrent write() can overwrite data. At the same
time, zram_meta must be aware of a) specific compression algorithm memory
requirements and b) necessary locking to protect compression buffers. To
remove requirement a) new struct zcomp_strm introduced, which contains a
compress/decompress `buffer' and compression algorithm `private' part.
While struct zcomp implements zcomp_strm stream handling and locking and
removes requirement b) from zram meta. zcomp ->create() and ->destroy(),
respectively, allocate and deallocate algorithm specific zcomp_strm
`private' part.
Every zcomp has zcomp stream and mutex to protect its compression stream.
Stream usage semantics remains the same -- only one write can hold stream
lock and use its buffers. zcomp_strm_find() turns caller into exclusive
user of a stream (holding stream mutex until zram release stream), and
zcomp_strm_release() makes zcomp stream available (unlock the stream
mutex). Hence no concurrent write (compression) operations possible at
the moment.
iozone -t 3 -R -r 16K -s 60M -I +Z
test base patched
--------------------------------------------------
Initial write 597992.91 591660.58
Rewrite 609674.34 616054.97
Read 2404771.75 2452909.12
Re-read 2459216.81 2470074.44
Reverse Read 1652769.66 1589128.66
Stride read 2202441.81 2202173.31
Random read 2236311.47 2276565.31
Mixed workload 1423760.41 1709760.06
Random write 579584.08 615933.86
Pwrite 597550.02 594933.70
Pread 1703672.53 1718126.72
Fwrite 1330497.06 1461054.00
Fread 3922851.00 3957242.62
Usage examples:
comp = zcomp_create(NAME) /* NAME e.g. "lzo" */
which initialises compressing backend if requested algorithm is supported.
Compress:
zstrm = zcomp_strm_find(comp)
zcomp_compress(comp, zstrm, src, &dst_len)
[..] /* copy compressed data */
zcomp_strm_release(comp, zstrm)
Decompress:
zcomp_decompress(comp, src, src_len, dst);
Free compessing backend and its zcomp stream:
zcomp_destroy(comp)
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
allocate new `zram_meta' in disksize_store() only for uninitialised zram
device, saving a number of allocations and deallocations in case if
disksize_store() was called on currently used device. at the same time
zram_meta stack variable is not necessary, because we can set ->meta
directly. there is also no need in setting QUEUE_FLAG_NONROT queue on
every disksize_store(), set it once during device creation.
[minchan@kernel.org: handle zram->meta alloc fail case]
[minchan@kernel.org: prevent lockdep spew of init_lock]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Jerome Marchand <jmarchan@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
