- Fix VDSO time-related function behavior for systems where we need to
fall back to syscalls, but were instead returning bogus results.
- A fix to TLB exception handlers for Cavium Octeon systems where they
would inadvertently clobber the $1/$at register.
- A build fix for bcm63xx configurations.
- Switch to using my @kernel.org email address.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXbTEbhYccGF1bGJ1cnRv
bkBrZXJuZWwub3JnAAoJED6nn6y1dQDd+HsBAJ2Zvzlm+CftfNTPbG1SihhyH3s4
edn8VuexsPJp+TjJAP9UZHPQj35tvS5MWYRg0YsNz9HYPTVclYdEsLS9KbSMCw==
=YNU+
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few MIPS fixes:
- Fix VDSO time-related function behavior for systems where we need
to fall back to syscalls, but were instead returning bogus results.
- A fix to TLB exception handlers for Cavium Octeon systems where
they would inadvertently clobber the $1/$at register.
- A build fix for bcm63xx configurations.
- Switch to using my @kernel.org email address"
* tag 'mips_fixes_5.4_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: tlbex: Fix build_restore_pagemask KScratch restore
MIPS: bmips: mark exception vectors as char arrays
mips: vdso: Fix __arch_get_hw_counter()
MAINTAINERS: Use @kernel.org address for Paul Burton
Here is a single tty/serial driver fix for 5.4-rc5 that resolves a
reported issue.
It has been in linux-next for a while with no problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXbSMbA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykz5gCePUE/o1QyvaCVlZO6CkU+Jlq5wm0An31WM2mW
GKNkLU0P/KUINMBvE8sV
=aykN
-----END PGP SIGNATURE-----
Merge tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fix from Greg KH:
"Here is a single tty/serial driver fix for 5.4-rc5 that resolves a
reported issue.
It has been in linux-next for a while with no problems"
* tag 'tty-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
8250-men-mcb: fix error checking when get_num_ports returns -ENODEV
Here is a single staging driver fix, for the wlan-ng driver, that
resolves a reported issue.
It is been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXbSLUQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynO4gCfab1VoWPRVdWZhHyuoujMJzT9Sf8AmwZjjfdq
Dcdt02eKTe18+jvirVeE
=0l6i
-----END PGP SIGNATURE-----
Merge tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix, for the wlan-ng driver, that
resolves a reported issue.
It is been in linux-next for a while with no reported issues"
* tag 'staging-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wlan-ng: fix exit return when sme->key_idx >= NUM_WEPKEYS
Here is a single sysfs fix for 5.4-rc5.
It resolves an error if you actually try to use the __BIN_ATTR_WO()
macro, seems I never tested it properly before :(
This has been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXbSJpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynoggCgt6YYqlZ1N51QSE7Lf57QN83IOOoAnjih4LWX
b1q3d4JxuKEfGXdwgl3V
=CrXh
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single sysfs fix for 5.4-rc5.
It resolves an error if you actually try to use the __BIN_ATTR_WO()
macro, seems I never tested it properly before :(
This has been in linux-next for a while with no reported issues"
* tag 'driver-core-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: Fixes __BIN_ATTR_WO() macro
This is a single char/misc driver fix (well, a binder fix to be
specific) to resolve a reported issue by Jann. It's been in linux-next
for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXbSKbg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk6wwCgwkxF667WQcJ2Eh9nE/9ZvDvrmlwAn3q2VmZM
94K3nJrFLohNgTBJ4SHG
=d8Af
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull binder fix from Greg KH:
"This is a single binder fix to resolve a reported issue by Jann. It's
been in linux-next for a while with no reported issues"
* tag 'char-misc-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: Don't modify VMA bounds in ->mmap handler
Here are a number of small USB driver fixes for 5.4-rc5.
More "fun" with some of the misc USB drivers as found by syzbot, and
there are a number of other small bugfixes in here for reported issues.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXbSNXA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylrbgCfdgF24UtCBMI1P5E+gFOVhuPg+vIAniTEHMRZ
iZqdtEh5mJNPoWzE8wRd
=9utt
-----END PGP SIGNATURE-----
Merge tag 'usb-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes for 5.4-rc5.
More "fun" with some of the misc USB drivers as found by syzbot, and
there are a number of other small bugfixes in here for reported
issues.
All have been in linux-next for a while with no reported issues"
* tag 'usb-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdns3: Error out if USB_DR_MODE_UNKNOWN in cdns3_core_init_role()
USB: ldusb: fix read info leaks
USB: serial: ti_usb_3410_5052: clean up serial data access
USB: serial: ti_usb_3410_5052: fix port-close races
USB: usblp: fix use-after-free on disconnect
usb: udc: lpc32xx: fix bad bit shift operation
usb: cdns3: Fix dequeue implementation.
USB: legousbtower: fix a signedness bug in tower_probe()
USB: legousbtower: fix memleak on disconnect
USB: ldusb: fix memleak on disconnect
Pull i2c fixes from Wolfram Sang:
"A few driver fixes for the I2C subsystem"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: remove warning when compiling with W=1
i2c: stm32f7: fix a race in slave mode with arbitration loss irq
i2c: stm32f7: fix first byte to send in slave mode
i2c: mt65xx: fix NULL ptr dereference
i2c: aspeed: fix master pending state handling
-----BEGIN PGP SIGNATURE-----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=PhEL
-----END PGP SIGNATURE-----
Merge tag 'for-linus-2019-10-26' of git://git.kernel.dk/linux-block
Pull block and io_uring fixes from Jens Axboe:
"A bit bigger than usual at this point in time, mostly due to some good
bug hunting work by Pavel that resulted in three io_uring fixes from
him and two from me. Anyway, this pull request contains:
- Revert of the submit-and-wait optimization for io_uring, it can't
always be done safely. It depends on commands always making
progress on their own, which isn't necessarily the case outside of
strict file IO. (me)
- Series of two patches from me and three from Pavel, fixing issues
with shared data and sequencing for io_uring.
- Lastly, two timeout sequence fixes for io_uring (zhangyi)
- Two nbd patches fixing races (Josef)
- libahci regulator_get_optional() fix (Mark)"
* tag 'for-linus-2019-10-26' of git://git.kernel.dk/linux-block:
nbd: verify socket is supported during setup
ata: libahci_platform: Fix regulator_get_optional() misuse
nbd: handle racing with error'ed out commands
nbd: protect cmd->status with cmd->lock
io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
io_uring: used cached copies of sq->dropped and cq->overflow
io_uring: Fix race for sqes with userspace
io_uring: Fix broken links with offloading
io_uring: Fix corrupted user_data
io_uring: correct timeout req sequence when inserting a new entry
io_uring : correct timeout req sequence when waiting timeout
io_uring: revert "io_uring: optimize submit_and_wait API"
Paolo Abeni says:
====================
ipv4: fix route update on metric change.
This fixes connected route update on some edge cases for ip addr metric
change.
It additionally includes self tests for the covered scenarios. The new tests
fail on unpatched kernels and pass on the patched one.
v1 -> v2:
- add selftests
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds two more tests to ipv4_addr_metric_test() to
explicitly cover the scenarios fixed by the previous patch.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit af4d768ad2 ("net/ipv4: Add support for specifying metric
of connected routes"), when updating an IP address with a different metric,
the associated connected route is updated, too.
Still, the mentioned commit doesn't handle properly some corner cases:
$ ip addr add dev eth0 192.168.1.0/24
$ ip addr add dev eth0 192.168.2.1/32 peer 192.168.2.2
$ ip addr add dev eth0 192.168.3.1/24
$ ip addr change dev eth0 192.168.1.0/24 metric 10
$ ip addr change dev eth0 192.168.2.1/32 peer 192.168.2.2 metric 10
$ ip addr change dev eth0 192.168.3.1/24 metric 10
$ ip -4 route
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.0
192.168.2.2 dev eth0 proto kernel scope link src 192.168.2.1
192.168.3.0/24 dev eth0 proto kernel scope link src 192.168.2.1 metric 10
Only the last route is correctly updated.
The problem is the current test in fib_modify_prefix_metric():
if (!(dev->flags & IFF_UP) ||
ifa->ifa_flags & (IFA_F_SECONDARY | IFA_F_NOPREFIXROUTE) ||
ipv4_is_zeronet(prefix) ||
prefix == ifa->ifa_local || ifa->ifa_prefixlen == 32)
Which should be the logical 'not' of the pre-existing test in
fib_add_ifaddr():
if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) &&
(prefix != addr || ifa->ifa_prefixlen < 32))
To properly negate the original expression, we need to change the last
logical 'or' to a logical 'and'.
Fixes: af4d768ad2 ("net/ipv4: Add support for specifying metric of connected routes")
Reported-and-suggested-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
memset() the structure ethtool_wolinfo that has padded bytes
but the padded bytes have not been zeroed out.
Signed-off-by: zhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman says:
====================
IPVS fixes for v5.4
* Eric Dumazet resolves a race condition in switching the defense level
* Davide Caratti resolves a race condition in module removal
====================
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
- Add R_390_GLOB_DAT relocation type support. This fixes boot problem
on linux-next.
- Fix memory leak in zcrypt.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl20GckACgkQjYWKoQLX
FBjMdAf9Ff/2AOphOTgkhb4rTM4iVBCR89f5XvsDiJsgYjfJJcr/iWlyu5/j83et
3mgAsg4DlsCum3XV6cYJ9hmVfFuSMiO04tWuQ0BOyc+s5LZrytvvqmtI7wkDvj8W
2L7LJ3hPJVDsEJQNKg8aixmGXkA8aa34JiXdDkDKzLIoW0Gs6Zybf5JpXAFZxQtM
fFUYuDSE2qPPOOJYZTQgIvqjGH6EIleyWxWgLTKbIodlnqJIp7kfujxdkn08SbxF
3CRIMxujm4yGn0ETDOXyYYGtZtOSQTiIgDIlEMca4dK50ZEP6eyygXy6kDbMXAyj
1SMvZm+NohO/UmLrafiFriiLnLiMrg==
=wcZ9
-----END PGP SIGNATURE-----
Merge tag 's390-5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Add R_390_GLOB_DAT relocation type support. This fixes boot problem
on linux-next.
- Fix memory leak in zcrypt
* tag 's390-5.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/kaslr: add support for R_390_GLOB_DAT relocation type
s390/zcrypt: fix memleak at release
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCXbQMcQAKCRCAXGG7T9hj
vj3nAP9OLhgxeq1AeGEslLWv2nSEJzmMIQ2/Qv/pyZoQjQeZVgD+Jyl+pt8u0giG
DaL/aw+i8P7aDM/3jnBpXB0PlYIw5go=
=+GfI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixlet from Juergen Gross:
"Just one patch for issuing a deprecation warning for 32-bit Xen pv
guests"
* tag 'for-linus-5.4-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: issue deprecation warning for 32-bit pv guest
- fix a regression in the intel-iommu get_required_mask conversion
(Arvind Sankar)
-----BEGIN PGP SIGNATURE-----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=jbwS
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
"Fix a regression in the intel-iommu get_required_mask conversion
(Arvind Sankar)"
* tag 'dma-mapping-5.4-2' of git://git.infradead.org/users/hch/dma-mapping:
iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU
- Fix a performance regression that followed from a fix to the
conversion of the fsdax implementation to the xarray. v5.3 users
report that they stop seeing huge page mappings on an application +
filesystem layout that was seeing huge pages previously on v5.2.
-----BEGIN PGP SIGNATURE-----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=LioO
-----END PGP SIGNATURE-----
Merge tag 'dax-fix-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull dax fix from Dan Williams:
"Fix a performance regression that followed from a fix to the
conversion of the fsdax implementation to the xarray. v5.3 users
report that they stop seeing huge page mappings on an application +
filesystem layout that was seeing huge pages previously on v5.2"
* tag 'dax-fix-5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
fs/dax: Fix pmd vs pte conflict detection
A helper function of ALSA bebob driver returns negative value in a
function which has a prototype to return unsigned value.
This commit fixes it by changing the prototype.
Fixes: eb7b3a056c ("ALSA: bebob: Add commands and connections/streams management")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191026030620.12077-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For adapters which support the SGE Doorbell Queue Timer facility,
we configured the Ethernet TX Queues to send CIDX Updates to the
Associated Ethernet RX Response Queue with CPL_SGE_EGR_UPDATE
messages to allow us to respond more quickly to the CIDX Updates.
But, this was adding load to PCIe Link RX bandwidth and,
potentially, resulting in higher CPU Interrupt load.
This patch requests the HW to deliver the CIDX updates to the TX
queue status page rather than generating an ingress queue message
(as an interrupt). With this patch, the load on RX bandwidth is
reduced and a substantial improvement in BW is noticed at lower
IO sizes.
Fixes: d429005fdf ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rtnl_net_notifyid(), we certainly can't pass a null GFP flag to
rtnl_notify(). A GFP_KERNEL flag would be fine in most circumstances,
but there are a few paths calling rtnl_net_notifyid() from atomic
context or from RCU critical sections. The later also precludes the use
of gfp_any() as it wouldn't detect the RCU case. Also, the nlmsg_new()
call is wrong too, as it uses GFP_KERNEL unconditionally.
Therefore, we need to pass the GFP flags as parameter and propagate it
through function calls until the proper flags can be determined.
In most cases, GFP_KERNEL is fine. The exceptions are:
* openvswitch: ovs_vport_cmd_get() and ovs_vport_cmd_dump()
indirectly call rtnl_net_notifyid() from RCU critical section,
* rtnetlink: rtmsg_ifinfo_build_skb() already receives GFP flags as
parameter.
Also, in ovs_vport_cmd_build_info(), let's change the GFP flags used
by nlmsg_new(). The function is allowed to sleep, so better make the
flags consistent with the ones used in the following
ovs_vport_cmd_fill_info() call.
Found by code inspection.
Fixes: 9a9634545c ("netns: notify netns id events")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch corrects the SPDX License Identifier style in
header file related to ethernet driver for Cortina Gemini
devices. For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul says:
====================
net/smc: fixes for -net
Fixes for the net tree, covering a memleak when closing
SMC fallback sockets and fix SMC-R connection establishment
when vlan-ids are used.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Creating of an SMC-R connection with vlan-id fails, because
smc_listen_work() determines the vlan_id of the connection,
saves it in struct smc_init_info ini, but clears the ini area
again if SMC-D is not applicable.
This patch just resets the ISM device before investigating
SMC-R availability.
Fixes: bc36d2fc93 ("net/smc: consolidate function parameters")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For SMC sockets forced to fallback to TCP, the file is propagated
from the outer SMC to the internal TCP socket. When closing the SMC
socket, the internal TCP socket file pointer must be restored to the
original NULL value, otherwise memory leaks may show up (found with
CONFIG_DEBUG_KMEMLEAK).
The internal TCP socket is released in smc_clcsock_release(), which
calls __sock_release() function in net/socket.c. This calls the
needed iput(SOCK_INODE(sock)) only, if the file pointer has been reset
to the original NULL-value.
Fixes: 07603b2308 ("net/smc: propagate file from SMC to TCP socket")
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch,
53c710[x2], target) and one core change that tries to close a race
between sysfs delete and module removal.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXbN1gSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWUzAP4tB9Z+
X5zfnMLmeAtSCnVwIgFX3/GVSFfzEmi+3VxfBQEA3nfs5AAJCPsaTk9z+jLtAKPk
6uYoHwsyTHal19Ojt9g=
=IOPn
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Nine changes, eight to drivers (qla2xxx, hpsa, lpfc, alua, ch,
53c710[x2], target) and one core change that tries to close a race
between sysfs delete and module removal"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: remove left-over BUILD_NVME defines
scsi: core: try to get module before removing device
scsi: hpsa: add missing hunks in reset-patch
scsi: target: core: Do not overwrite CDB byte 1
scsi: ch: Make it possible to open a ch device multiple times again
scsi: fix kconfig dependency warning related to 53C700_LE_ON_BE
scsi: sni_53c710: fix compilation error
scsi: scsi_dh_alua: handle RTPG sense code correctly during state transitions
scsi: qla2xxx: fix a potential NULL pointer dereference
If we always compile the get_break_insn_length inline function we can
remove the ifdefs and let dead code elimination take care of the warn
branch that is now unreadable because the report_bug stub always
returns BUG_TRAP_TYPE_BUG.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
If CONFIG_NET_HWBM is not set, then these stub functions in
<net/hwbm.h> should be declared static to avoid trying to
export them from any driver that includes this.
Fixes the following sparse warnings:
./include/net/hwbm.h:24:6: warning: symbol 'hwbm_buf_free' was not declared. Should it be static?
./include/net/hwbm.h:25:5: warning: symbol 'hwbm_pool_refill' was not declared. Should it be static?
./include/net/hwbm.h:26:5: warning: symbol 'hwbm_pool_add' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the CONFIG_MVNET_BA is not set, then make the stub functions
static inline to avoid trying to export them, and remove hte
following sparse warnings:
drivers/net/ethernet/marvell/mvneta_bm.h:163:6: warning: symbol 'mvneta_bm_pool_destroy' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:165:6: warning: symbol 'mvneta_bm_bufs_free' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:167:5: warning: symbol 'mvneta_bm_construct' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:168:5: warning: symbol 'mvneta_bm_pool_refill' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:170:23: warning: symbol 'mvneta_bm_pool_use' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:181:18: warning: symbol 'mvneta_bm_get' was not declared. Should it be static?
drivers/net/ethernet/marvell/mvneta_bm.h:182:6: warning: symbol 'mvneta_bm_put' was not declared. Should it be static?
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is networking hardware that isn't based on Ethernet for layers 1 and 2.
For example CAN.
CAN is a multi-master serial bus standard for connecting Electronic Control
Units [ECUs] also known as nodes. A frame on the CAN bus carries up to 8 bytes
of payload. Frame corruption is detected by a CRC. However frame loss due to
corruption is possible, but a quite unusual phenomenon.
While fq_codel works great for TCP/IP, it doesn't for CAN. There are a lot of
legacy protocols on top of CAN, which are not build with flow control or high
CAN frame drop rates in mind.
When using fq_codel, as soon as the queue reaches a certain delay based length,
skbs from the head of the queue are silently dropped. Silently meaning that the
user space using a send() or similar syscall doesn't get an error. However
TCP's flow control algorithm will detect dropped packages and adjust the
bandwidth accordingly.
When using fq_codel and sending raw frames over CAN, which is the common use
case, the user space thinks the package has been sent without problems, because
send() returned without an error. pfifo_fast will drop skbs, if the queue
length exceeds the maximum. But with this scheduler the skbs at the tail are
dropped, an error (-ENOBUFS) is propagated to user space. So that the user
space can slow down the package generation.
On distributions, where fq_codel is made default via CONFIG_DEFAULT_NET_SCH
during compile time, or set default during runtime with sysctl
net.core.default_qdisc (see [1]), we get a bad user experience. In my test case
with pfifo_fast, I can transfer thousands of million CAN frames without a frame
drop. On the other hand with fq_codel there is more then one lost CAN frame per
thousand frames.
As pointed out fq_codel is not suited for CAN hardware, so this patch changes
attach_one_default_qdisc() to use pfifo_fast for "ARPHRD_CAN" network devices.
During transition of a netdev from down to up state the default queuing
discipline is attached by attach_default_qdiscs() with the help of
attach_one_default_qdisc(). This patch modifies attach_one_default_qdisc() to
attach the pfifo_fast (pfifo_fast_ops) if the network device type is
"ARPHRD_CAN".
[1] https://github.com/systemd/systemd/issues/9194
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull input fix from Dmitry Torokhov:
"A fix for st1232 driver to properly report coordinates for 2nd and
subsequent fingers when more than one is on the surface"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: st1232 - fix reporting multitouch coordinates
nbd requires socket families to support the shutdown method so the nbd
recv workqueue can be woken up from its sock_recvmsg call. If the socket
does not support the callout we will leave recv works running or get hangs
later when the device or module is removed.
This adds a check during socket connection/reconnection to make sure the
socket being passed in supports the needed callout.
Reported-by: syzbot+24c12fa8d218ed26011a@syzkaller.appspotmail.com
Fixes: e9e006f5fc ("nbd: fix max number of supported devs")
Tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This driver is using regulator_get_optional() to handle all the supplies
that it handles, and only ever enables and disables all supplies en masse
without ever doing any other configuration of the device to handle missing
power. These are clear signs that the API is being misused - it should only
be used for supplies that may be physically absent from the system and in
these cases the hardware usually needs different configuration if the
supply is missing. Instead use normal regualtor_get(), if the supply is
not described in DT then the framework will substitute a dummy regulator in
so no special handling is needed by the consumer driver.
In the case of the PHY regulator the handling in the driver is a hack to
deal with integrated PHYs; the supplies are only optional in the sense
that that there's some confusion in the code about where they're bound to.
From a code point of view they function exactly as normal supplies so can
be treated as such. It'd probably be better to model this by instantiating
a PHY object for integrated PHYs.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hit the following warning in production
print_req_error: I/O error, dev nbd0, sector 7213934408 flags 80700
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
Workqueue: knbd-recv recv_work [nbd]
RIP: 0010:refcount_sub_and_test_checked+0x53/0x60
Call Trace:
blk_mq_free_request+0xb7/0xf0
blk_mq_complete_request+0x62/0xf0
recv_work+0x29/0xa1 [nbd]
process_one_work+0x1f5/0x3f0
worker_thread+0x2d/0x3d0
? rescuer_thread+0x340/0x340
kthread+0x111/0x130
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
---[ end trace b079c3c67f98bb7c ]---
This was preceded by us timing out everything and shutting down the
sockets for the device. The problem is we had a request in the queue at
the same time, so we completed the request twice. This can actually
happen in a lot of cases, we fail to get a ref on our config, we only
have one connection and just error out the command, etc.
Fix this by checking cmd->status in nbd_read_stat. We only change this
under the cmd->lock, so we are safe to check this here and see if we've
already error'ed this command out, which would indicate that we've
completed it as well.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already do this for the most part, except in timeout and clear_req.
For the timeout case we take the lock after we grab a ref on the config,
but that isn't really necessary because we're safe to touch the cmd at
this point, so just move the order around.
For the clear_req cause this is initiated by the user, so again is safe.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod. Instead,
have modpost extract a symbol's namespace from __kstrtabns and
__ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused by
unescaped '/'. Use a different sed delimiter to avoid this problem.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ge3Z
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fixes from Jessica Yu:
- Revert __ksymtab_$namespace.$symbol naming scheme back to
__ksymtab_$symbol, as it was causing issues with depmod.
Instead, have modpost extract a symbol's namespace from __kstrtabns
and __ksymtab_strings.
- Fix `make nsdeps` for out of tree kernel builds (make O=...) caused
by unescaped '/'.
Use a different sed delimiter to avoid this problem.
* tag 'modules-for-v5.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
scripts/nsdeps: use alternative sed delimiter
symbol namespaces: revert to previous __ksymtab name scheme
modpost: make updating the symbol namespace explicit
modpost: delegate updating namespaces to separate function
A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc no-watchdog
regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA), Allwinner
(phy regulators, PMU removal on A64, etc).
-----BEGIN PGP SIGNATURE-----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=Jy/6
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A slightly larger set of fixes have accrued in the last two weeks.
Mostly a collection of the usual smaller fixes:
- Marvell Armada: USB phy setup issues on Turris Mox
- Broadcom: GPIO/pinmux DT mapping corrections for Stingray, MMC bus
width fix for RPi Zero W, GPIO LED removal for RPI CM3. Also some
maintainer updates.
- OMAP: Fixlets for display config, interrupt settings for wifi, some
clock/PM pieces. Also IOMMU regression fix and a ti-sysc
no-watchdog regression fix.
- i.MX: A few fixes around PM/settings, some devicetree fixlets and
catching up with config option changes in DRM
- Rockchip: RockRro64 misc DT fixups, Hugsun X99 USB-C, Kevin display
panel settings
... and some smaller fixes for Davinci (backlight, McBSP DMA),
Allwinner (phy regulators, PMU removal on A64, etc)"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits)
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
MAINTAINERS: Update the Spreadtrum SoC maintainer
MAINTAINERS: Remove Gregory and Brian for ARCH_BRCMSTB
ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue
bus: ti-sysc: Fix watchdog quirk handling
ARM: OMAP2+: Add pdata for OMAP3 ISP IOMMU
ARM: OMAP2+: Plug in device_enable/idle ops for IOMMUs
ARM: davinci_all_defconfig: enable GPIO backlight
ARM: davinci: dm365: Fix McBSP dma_slave_map entry
ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
ARM: imx_v6_v7_defconfig: Enable CONFIG_DRM_MSM
arm64: dts: imx8mn: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mm: Use correct clock for usdhc's ipg clk
arm64: dts: imx8mq: Use correct clock for usdhc's ipg clk
ARM: dts: imx7s: Correct GPT's ipg clock source
ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect'
ARM: dts: imx6q-logicpd: Re-Enable SNVS power key
arm64: dts: lx2160a: Correct CPU core idle state name
mailmap: Add Simon Arlott (replacement for expired email address)
arm64: dts: rockchip: Fix override mode for rk3399-kevin panel
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJdst7mAAoJEL/70l94x66DZmgIAJJK+LdYja4NljoOd9gCt43g
lGlRJpmfaDUNQHrfuG1ESC+tD73ndaehFfBPSTnpUmgGyq11NCtuMVjVR6ZgIcsh
gUOzgk5PmJIUcb7bgOVkXHXTsqSmC7X8JQqrHmTESY7nEUOGO3GqVdviC/tIdM0Z
lS8F7b21OektJO7PPRgCsgOKwCXKL9SRMClBc7+7AaiShF7WJaKFHbu0iXsENv5D
8QOQDSDWAVWCdNy4Wrv40lJ2DYUydUFh579ekuKkvvus3dBdK+il0epu7kl+HCaU
OpTVQtWmLbgYs++IL4iLj0YIAxoTT19gz5pxOBtMXcPAppGrbfbgKqtpsLYne60=
=PwUK
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes for ARM, PPC and x86, plus selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: Don't leak L1 MMIO regions to L2
KVM: SVM: Fix potential wrong physical id in avic_handle_ldr_update
kvm: clear kvmclock MSR on reset
KVM: x86: fix bugon.cocci warnings
KVM: VMX: Remove specialized handling of unexpected exit-reasons
selftests: kvm: fix sync_regs_test with newer gccs
selftests: kvm: vmx_dirty_log_test: skip the test when VMX is not supported
selftests: kvm: consolidate VMX support checks
selftests: kvm: vmx_set_nested_state_test: don't check for VMX support twice
KVM: Don't shrink/grow vCPU halt_poll_ns if host side polling is disabled
selftests: kvm: synchronize .gitignore to Makefile
kvm: x86: Expose RDPID in KVM_GET_SUPPORTED_CPUID
KVM: arm64: pmu: Reset sample period on overflow handling
KVM: arm64: pmu: Set the CHAINED attribute before creating the in-kernel event
arm64: KVM: Handle PMCR_EL0.LC as RES1 on pure AArch64 systems
KVM: arm64: pmu: Fix cycle counter truncation
KVM: PPC: Book3S HV: XIVE: Ensure VP isn't already in use
komeda:
- typo fixes
- flushing pipes fix
amdgpu:
- Fix suspend/resume issue related to multi-media engines
- Fix memory leak in user ptr code related to hmm conversion
- Fix possible VM faults when allocating page table memory
- Fix error handling in bo list ioctl
-----BEGIN PGP SIGNATURE-----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=k3rD
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-10-25' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Quiet week this week, which I suspect means some people just didn't
get around to sending me fixes pulls in time. This has 2 komeda and a
bunch of amdgpu fixes in it:
komeda:
- typo fixes
- flushing pipes fix
amdgpu:
- Fix suspend/resume issue related to multi-media engines
- Fix memory leak in user ptr code related to hmm conversion
- Fix possible VM faults when allocating page table memory
- Fix error handling in bo list ioctl"
* tag 'drm-fixes-2019-10-25' of git://anongit.freedesktop.org/drm/drm:
drm/komeda: Fix typos in komeda_splitter_validate
drm/komeda: Don't flush inactive pipes
drm/amdgpu/vce: fix allocation size in enc ring test
drm/amdgpu: fix error handling in amdgpu_bo_list_create
drm/amdgpu: fix potential VM faults
drm/amdgpu: user pages array memory leak fix
drm/amdgpu/vcn: fix allocation size in enc ring test
drm/amdgpu/uvd7: fix allocation size in enc ring test (v2)
drm/amdgpu/uvd6: fix allocation size in enc ring test (v2)
We currently assume that submissions from the sqthread are successful,
and if IO polling is enabled, we use that value for knowing how many
completions to look for. But if we overflowed the CQ ring or some
requests simply got errored and already completed, they won't be
available for polling.
For the case of IO polling and SQTHREAD usage, look at the pending
poll list. If it ever hits empty then we know that we don't have
anymore pollable requests inflight. For that case, simply reset
the inflight count to zero.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently use the ring values directly, but that can lead to issues
if the application is malicious and changes these values on our behalf.
Created in-kernel cached versions of them, and just overwrite the user
side when we update them. This is similar to how we treat the sq/cq
ring tail/head updates.
Reported-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_ring_submit() finalises with
1. io_commit_sqring(), which releases sqes to the userspace
2. Then calls to io_queue_link_head(), accessing released head's sqe
Reorder them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sq_thread() processes sqes by 8 without considering links. As a
result, links will be randomely subdivided.
The easiest way to fix it is to call io_get_sqring() inside
io_submit_sqes() as do io_ring_submit().
Downsides:
1. This removes optimisation of not grabbing mm_struct for fixed files
2. It submitting all sqes in one go, without finer-grained sheduling
with cq processing.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a bug, where failed linked requests are returned not with
specified @user_data, but with garbage from a kernel stack.
The reason is that io_fail_links() uses req->user_data, which is
uninitialised when called from io_queue_sqe() on fail path.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support for the kernel as Xen 32-bit PV guest will soon be removed.
Issue a warning when booted as such.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
- Sifive PLIC: force driver to skip non-relevant contexts
- GICv4: Don't send VMOVP commands to ITSs that don't have
this vPE mapped
-----BEGIN PGP SIGNATURE-----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=9wMN
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull the second lot of irqchip updates for 5.4 from Marc Zyngier:
- Sifive PLIC: force driver to skip non-relevant contexts
- GICv4: Don't send VMOVP commands to ITSs that don't have
this vPE mapped
This reorganization will allow us to call kvm_arch_destroy_vm in the
event that kvm_create_vm fails after calling kvm_arch_init_vm.
Suggested-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent cleanup in the way EEH support is added to a device causes a
kernel oops when the cxl driver probes a device and creates virtual
devices discovered on the FPGA:
BUG: Kernel NULL pointer dereference at 0x000000a0
Faulting instruction address: 0xc000000000048070
Oops: Kernel access of bad area, sig: 7 [#1]
...
NIP eeh_add_device_late.part.9+0x50/0x1e0
LR eeh_add_device_late.part.9+0x3c/0x1e0
Call Trace:
_dev_info+0x5c/0x6c (unreliable)
pnv_pcibios_bus_add_device+0x60/0xb0
pcibios_bus_add_device+0x40/0x60
pci_bus_add_device+0x30/0x100
pci_bus_add_devices+0x64/0xd0
cxl_pci_vphb_add+0xe0/0x130 [cxl]
cxl_probe+0x504/0x5b0 [cxl]
local_pci_probe+0x6c/0x110
work_for_cpu_fn+0x38/0x60
The root cause is that those cxl virtual devices don't have a
representation in the device tree and therefore no associated pci_dn
structure. In eeh_add_device_late(), pdn is NULL, so edev is NULL and
we oops.
We never had explicit support for EEH for those virtual devices.
Instead, EEH events are reported to the (real) pci device and handled
by the cxl driver. Which can then forward to the virtual devices and
handle dependencies. The fact that we try adding EEH support for the
virtual devices is new and a side-effect of the recent cleanup.
This patch fixes it by skipping adding EEH support on powernv for
devices which don't have a pci_dn structure.
The cxl driver doesn't create virtual devices on pseries so this patch
doesn't fix it there intentionally.
Fixes: b905f8cdca ("powerpc/eeh: EEH for pSeries hot plug")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016162833.22509-1-fbarrat@linux.ibm.com
Modify plic_init() to skip .dts interrupt contexts other
than supervisor external interrupt.
The .dts entry for plic may specify multiple interrupt contexts.
For example, it may assign two entries IRQ_M_EXT and IRQ_S_EXT,
in that order, to the same interrupt controller. This patch
modifies plic_init() to skip the IRQ_M_EXT context since
IRQ_S_EXT is currently the only supported context.
If IRQ_M_EXT is not skipped, plic_init() will report "handler
already present for context" when it comes across the IRQ_S_EXT
context in the next iteration of its loop.
Without this patch, .dts would have to be edited to replace the
value of IRQ_M_EXT with -1 for it to be skipped.
Signed-off-by: Alan Mikhak <alan.mikhak@sifive.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com> # arch/riscv
Link: https://lkml.kernel.org/r/1571933503-21504-1-git-send-email-alan.mikhak@sifive.com
