Remove the fi_inode field in struct nfs4_file in order to remove the
possibility of struct nfs4_file pinning the inode when it does not have
any open state.
The only place we still need to get to an inode is in check_for_locks,
so change it to use find_any_file and use the inode from any that it
finds. If it doesn't find one, then just assume there aren't any.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...instead of just checking the inode that corresponds to it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This makes more sense anyway since an inode pointer value can change
even when the filehandle doesn't.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
For use when we may not have a struct inode.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Replace a comma between expression statements by a semicolon. This changes
the semantics of the code, but given the current indentation appears to be
what is intended.
A simplified version of the Coccinelle semantic patch that performs this
transformation is as follows:
// <smpl>
@r@
expression e1,e2;
@@
e1
-,
+;
e2;
// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Open stateids must be initialized with the st_access_bmap and
st_deny_bmap set to 0, so that nfs4_get_vfs_file can properly record
their state in old_access_bmap and old_deny_bmap.
This bug was introduced in commit baeb4ff0e5 (nfsd: make deny mode
enforcement more efficient and close races in it) and was causing the
refcounts to end up incorrect when nfs4_get_vfs_file returned an error
after bumping the refcounts. This made it impossible to unmount the
underlying filesystem after running pynfs tests that involve deny modes.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's a potential race between a lease break and DELEGRETURN call.
Suppose a lease break comes in and queues the workqueue job for a
delegation, but it doesn't run just yet. Then, a DELEGRETURN comes in
finds the delegation and calls destroy_delegation on it to unhash it and
put its primary reference.
Next, the workqueue job runs and queues the delegation back onto the
del_recall_lru list, issues the CB_RECALL and puts the final reference.
With that, the final reference to the delegation is put, but it's still
on the LRU list.
When we go to unhash a delegation, it's because we intend to get rid of
it soon afterward, so we don't want lease breaks to mess with it once
that occurs. Fix this by bumping the dl_time whenever we unhash a
delegation, to ensure that lease breaks don't monkey with it.
I believe this is a regression due to commit 02e1215f9f (nfsd: Avoid
taking state_lock while holding inode lock in nfsd_break_one_deleg).
Prior to that, the state_lock was held in the lm_break callback itself,
and that would have prevented this race.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We will want to add reference counting to the lock stateid and open
stateids too in later patches.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If nfs4_setlease succesfully acquires a new delegation, then another
task breaks the delegation before we reach hash_delegation_locked, then
the breaking task will see an empty fi_delegations list and do nothing.
The client will receive an open reply incorrectly granting a delegation
and will never receive a recall.
Move more of the delegation fields to be protected by the fi_lock. It's
more granular than the state_lock and in later patches we'll want to
be able to rely on it in addition to the state_lock.
Attempt to acquire a delegation. If that succeeds, take the spinlocks
and then check to see if the file has had a conflict show up since then.
If it has, then we assume that the lease is no longer valid and that
we shouldn't hand out a delegation.
There's also one more potential (but very unlikely) problem. If the
lease is broken before the delegation is hashed, then it could leak.
In the event that the fi_delegations list is empty, reset the
fl_break_time to jiffies so that it's cleaned up ASAP by
the normal lease handling code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_probe_callback kicks off some work that will eventually run
nfsd4_process_cb_update and update the session flags. In theory we
could process a following SEQUENCE call before that update happens
resulting in flags that don't accurately represent, for example, the
lack of a backchannel.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current code always selects XPRT_TRANSPORT_BC_TCP for the back
channel, even when the forward channel was not TCP (eg, RDMA). When
a 4.1 mount is attempted with RDMA, the server panics in the TCP BC
code when trying to send CB_NULL.
Instead, construct the transport protocol number from the forward
channel transport or'd with XPRT_TRANSPORT_BC. Transports that do
not support bi-directional RPC will not have registered a "BC"
transport, causing create_backchannel_client() to fail immediately.
Fixes: https://bugzilla.linux-nfs.org/show_bug.cgi?id=265
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The first 8 ops of the compound are zeroed since they're a part of the
argument that's zeroed by the
memset(rqstp->rq_argp, 0, procp->pc_argsize);
in svc_process_common(). But we handle larger compounds by allocating
the memory on the fly in nfsd4_decode_compound(). Other than code
recently fixed by 01529e3f81 "NFSD: Fix memory leak in encoding denied
lock", I don't know of any examples of code depending on this
initialization. But it definitely seems possible, and I'd rather be
safe.
Compounds this long are unusual so I'm much more worried about failure
in this poorly tested cases than about an insignificant performance hit.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
sparse says:
fs/nfsd/auth.c:31:38: warning: incorrect type in argument 1 (different address spaces)
fs/nfsd/auth.c:31:38: expected struct cred const *cred
fs/nfsd/auth.c:31:38: got struct cred const [noderef] <asn:4>*real_cred
Add a new accessor for the ->real_cred and use that to fetch the
pointer. Accessing current->real_cred directly is actually quite safe
since we know that they can't go away so this is mostly a cosmetic fixup
to silence sparse.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Add an extra delegation state to allow the stateid to remain in the idr
tree until the last reference has been released. This will be necessary
to ensure uniqueness once the client_mutex is removed.
[jlayton: reset the sc_type under the state_lock in unhash_delegation]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to pass the delegation pointer in here as it's only used to get
the nfs4_file pointer.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
state_lock is a heavily contended global lock. We don't want to grab
that while simultaneously holding the inode->i_lock.
Add a new per-nfs4_file lock that we can use to protect the
per-nfs4_file delegation list. Hold that while walking the list in the
break_deleg callback and queue the workqueue job for each one.
The workqueue job can then take the state_lock and do the list
manipulations without the i_lock being held prior to starting the
rpc call.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's just an obfuscated INIT_WORK call. Just make the work_func_t a
non-static symbol and use a normal INIT_WORK call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Note that the caller has already reserved space for count and eof, so
xdr->p has already moved past them, only the padding remains.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Fixes dc97618ddd (nfsd4: separate splice and readv cases)
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 4ac7249ea5 (nfsd: use get_acl and ->set_acl)
don't check the acl returned from get_acl()/posix_acl_from_mode().
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Rename it to better describe what it does, and have it just return the
stateid instead of a __be32 (which is now always nfs_ok). Also, do the
search for an existing stateid after the delegation check, to reduce
cleanup if the delegation check returns error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The current enforcement of deny modes is both inefficient and scattered
across several places, which makes it hard to guarantee atomicity. The
inefficiency is a problem now, and the lack of atomicity will mean races
once the client_mutex is removed.
First, we address the inefficiency. We have to track deny modes on a
per-stateid basis to ensure that open downgrades are sane, but when the
server goes to enforce them it has to walk the entire list of stateids
and check against each one.
Instead of doing that, maintain a per-nfs4_file deny mode. When a file
is opened, we simply set any deny bits in that mode that were specified
in the OPEN call. We can then use that unified deny mode to do a simple
check to see whether there are any conflicts without needing to walk the
entire stateid list.
The only time we'll need to walk the entire list of stateids is when a
stateid that has a deny mode on it is being released, or one is having
its deny mode downgraded. In that case, we must walk the entire list and
recalculate the fi_share_deny field. Since deny modes are pretty rare
today, this should be very rare under normal workloads.
To address the potential for races once the client_mutex is removed,
protect fi_share_deny with the fi_lock. In nfs4_get_vfs_file, check to
make sure that any deny mode we want to apply won't conflict with
existing access. If that's ok, then have nfs4_file_get_access check that
new access to the file won't conflict with existing deny modes.
If that also passes, then get file access references, set the correct
access and deny bits in the stateid, and update the fi_share_deny field.
If opening the file or truncating it fails, then unwind the whole mess
and return the appropriate error.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Once we remove the client_mutex, there's an unlikely but possible race
that could occur. It will be possible for nfs4_file_put_access to race
with nfs4_file_get_access. The refcount will go to zero (briefly) and
then bumped back to one. If that happens we set ourselves up for a
use-after-free and the potential for a lock to race onto the i_flock
list as a filp is being torn down.
Ensure that we can safely bump the refcount on the file by holding the
fi_lock whenever that's done. The only place it currently isn't is in
get_lock_access.
In order to ensure atomicity with finding the file, use the
find_*_file_locked variants and then call get_lock_access to get new
access references on the nfs4_file under the same lock.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Fix the "deny" argument type, and start the loop at 1. The 0 iteration
is always a noop.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Cleanup -- ensure that the stateid bits are set at the same time that
the file access refcounts are incremented. Keeping them coherent like
this makes it easier to ensure that we account for all of the
references.
Since the initialization of the st_*_bmap fields is done when it's
hashed, we go ahead and hash the stateid before getting access to the
file and unhash it if that function returns error. This will be
necessary anyway in a follow-on patch that will overhaul deny mode
handling.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We never use anything above bit #3, so an unsigned long for each is
wasteful. Shrink them to a char each, and add some WARN_ON_ONCE calls if
we try to set or clear bits that would go outside those sizes.
Note too that because atomic bitops work on unsigned longs, we have to
abandon their use here. That shouldn't be a problem though since we
don't really care about the atomicity in this code anyway. Using them
was just a convenient way to flip bits.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and replace it with a simple swap call.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Have them take NFS4_SHARE_ACCESS_* flags instead of an open mode. This
spares the callers from having to convert it themselves.
This also allows us to simplify these functions as we no longer need
to do the access_to_omode conversion in either one.
Note too that this patch eliminates the WARN_ON in
__nfs4_file_get_access. It's valid for now, but in a later patch we'll
be bumping the refcounts prior to opening the file in order to close
some races, at which point we'll need to remove it anyway.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Use filp_close instead of open coding. filp_close does a bit more than
just release the locks and put the filp. It also calls ->flush and
dnotify_flush, both of which should be done here anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex, which currently protects
this array. While we don't actually need the find_*_file_locked variants
just yet, a later patch will. So go ahead and add them now to reduce
future churn in this code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Access to this list is currently serialized by the client_mutex. Add
finer grained locking around this list in preparation for its removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
No need to take the lock unless the count goes to 0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bruce says:
There's also a preexisting expire_client/laundromat vs break race:
- expire_client/laundromat adds a delegation to its local
reaplist using the same dl_recall_lru field that a delegation
uses to track its position on the recall lru and drops the
state lock.
- a concurrent break_lease adds the delegation to the lru.
- expire/client/laundromat then walks it reaplist and sees the
lru head as just another delegation on the list....
Fix this race by checking the dl_time under the state_lock. If we find
that it's not 0, then we know that it has already been queued to the LRU
list and that we shouldn't queue it again.
In the case of destroy_client, we must also ensure that we don't hit
similar races by ensuring that we don't move any delegations to the
reaplist with a dl_time of 0. Just bump the dl_time by one before we
drop the state_lock. We're destroying the delegations anyway, so a 1s
difference there won't matter.
The fault injection code also requires a bit of surgery here:
First, in the case of nfsd_forget_client_delegations, we must prevent
the same sort of race vs. the delegation break callback. For that, we
just increment the dl_time to ensure that a delegation callback can't
race in while we're working on it.
We can't do that for nfsd_recall_client_delegations, as we need to have
it actually queue the delegation, and that won't happen if we increment
the dl_time. The state lock is held over that function, so we don't need
to worry about these sorts of races there.
There is one other potential bug nfsd_recall_client_delegations though.
Entries on the victims list are not dequeued before calling
nfsd_break_one_deleg. That's a potential list corruptor, so ensure that
we do that there.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 8c7424cff6 (nfsd4: don't try to encode conflicting owner if low on space)
forgot free conf->data in nfsd4_encode_lockt and before sign conf->data to NULL
in nfsd4_encode_lock_denied.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
lookup_clientid is preferable to find_confirmed_client since it's able
to use the cached client in the compound state.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In later patches, we'll be moving the stateowner table into the
nfs4_client, and by doing this we ensure that we have a cached
nfs4_client pointer.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
...and have alloc_init_open_stateowner just use the cstate->clp pointer
instead of passing in a clp separately. This allows us to use the
cached nfs4_client pointer in the cstate instead of having to look it
up again.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We want to use the nfsd4_compound_state to cache the nfs4_client in
order to optimise away extra lookups of the clid.
In the v4.0 case, we use this to ensure that we only have to look up the
client at most once per compound for each call into lookup_clientid. For
v4.1+ we set the pointer in the cstate during SEQUENCE processing so we
should never need to do a search for it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
I saw this pop up with some pynfs testing:
[ 123.609992] nfsd: non-standard errno: -7
...and -7 is -E2BIG. I think what happened is that XFS returned -E2BIG
due to some xattr operations with the ACL10 pynfs TEST (I guess it has
limited xattr size?).
Add a better mapping for that error since it's possible that we'll need
it. How about we convert it to NFSERR_FBIG? As Bruce points out, they
both have "BIG" in the name so it must be good.
Also, turn the printk in this function into a WARN() so that we can get
a bit more information about situations that don't have proper mappings.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit 2a7420c03e504 (nfsd: Ensure that nfsd_create_setattr commits
files to stable storage), added a couple of calls to commit_metadata,
but doesn't convert their return codes to __be32 in the appropriate
places.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The cstate already holds information about the session, and hence
the client id, so it makes more sense to pass that information
rather than the current practice of passing a 'minor version' number.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
If the client were to disappear from underneath us while we're holding
a session reference, things would be bad. This cleanup helps ensure
that it cannot, which will be a possibility when the client_mutex is
removed.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Now that we know that we won't have several lockowners with the same,
owner->data, we can simplify nfsd4_release_lockowner and get rid of
the lo_list in the process.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Just like open-owners, lock-owners are associated with a name, a clientid
and, in the case of minor version 0, a sequence id. There is no association
to a file.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
A lockowner can have more than one lock stateid. For instance, if a
process has more than one file open and has locks on both, then the same
lockowner has more than one stateid associated with it. Change it so
that this reality is better reflected by the objects that nfsd uses.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the NFSv4 spec, lock stateids are per-file objects. Lockowners are not.
This patch replaces the current list of lock owners in the open stateids
with a list of lock stateids.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Minor cleanup that should introduce no behavioral changes.
Currently this function just unhashes the stateid and leaves the caller
to do the work of the CLOSE processing.
Change nfsd4_close_open_stateid so that it handles doing all of the work
of closing a stateid. Move the handling of the unhashed stateid into it
instead of doing that work in nfsd4_close. This will help isolate some
coming changes to stateid handling from nfsd4_close.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to confirm an openowner in v4.1 and above, so we can
go ahead and set NFS4_OO_CONFIRMED when we create openowners in
those versions. This will also be necessary when we remove the
client_mutex, as it'll be possible for two concurrent opens to race
in versions >4.0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the slot return, put session etc into a helper in fs/nfsd/nfs4state.c
instead of open coding in nfs4svc_encode_compoundres.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Not technically a bugfix, since nothing tries to use the return pointer
if this function doesn't return success, but it could be a problem
with some coming changes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the maximum number of connections that nfsd will allow
is based on the number of threads spawned. While this is fine for a
default, there really isn't a clear relationship between the two.
The number of threads corresponds to the number of concurrent requests
that we want to allow the server to process at any given time. The
connection limit corresponds to the maximum number of clients that we
want to allow the server to handle. These are two entirely different
quantities.
Break the dependency on increasing threads in order to allow for more
connections, by adding a new per-net parameter that can be set to a
non-zero value. The default is still to base it on the number of threads,
so there should be no behavior change for anyone who doesn't use it.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
