It's possible to get multiple events in a single frame/flip, so add an
option to print them all.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-6-mihail.atanassov@arm.com
It's potentially useful information when diagnosing error/warn IRQs, so
dump it to dmesg with a drm_info_printer. Hide this extra debug dumping
behind another komeda_dev->err_verbosity bit.
Note that there's not much sense in dumping it for INFO events,
since the VSYNC event will swamp the log.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-4-mihail.atanassov@arm.com
Named 'err_verbosity', currently with only 1 active bit in that
replicates the existing level - print error events once per flip.
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107114155.54307-2-mihail.atanassov@arm.com
Disabling the display using MCDE currently results in a warning
together with a delay caused by some timeouts:
mcde a0350000.mcde: MCDE display is disabled
------------[ cut here ]------------
WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
Workqueue: events drm_mode_rmfb_work_fn
[<c010f468>] (unwind_backtrace) from [<c010b54c>] (show_stack+0x10/0x14)
[<c010b54c>] (show_stack) from [<c079dd90>] (dump_stack+0x84/0x98)
[<c079dd90>] (dump_stack) from [<c011d1b0>] (__warn+0xb8/0xd4)
[<c011d1b0>] (__warn) from [<c011d230>] (warn_slowpath_fmt+0x64/0xc4)
[<c011d230>] (warn_slowpath_fmt) from [<c0413048>] (drm_atomic_helper_commit_hw_done+0xe0/0xe4)
[<c0413048>] (drm_atomic_helper_commit_hw_done) from [<c04159cc>] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c)
[<c04159cc>] (drm_atomic_helper_commit_tail_rpm) from [<c0415f5c>] (commit_tail+0x50/0x10c)
[<c0415f5c>] (commit_tail) from [<c04160dc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c04160dc>] (drm_atomic_helper_commit) from [<c0430790>] (drm_framebuffer_remove+0x390/0x428)
[<c0430790>] (drm_framebuffer_remove) from [<c0430860>] (drm_mode_rmfb_work_fn+0x38/0x48)
[<c0430860>] (drm_mode_rmfb_work_fn) from [<c01368a8>] (process_one_work+0x1f0/0x43c)
[<c01368a8>] (process_one_work) from [<c0136d48>] (worker_thread+0x254/0x55c)
[<c0136d48>] (worker_thread) from [<c013c014>] (kthread+0x124/0x150)
[<c013c014>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xeb14dfb0 to 0xeb14dff8)
dfa0: 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 314909bcd4c7d50c ]---
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out
The reason for this is that there is a vblank event pending, but we
never handle it after disabling the vblank interrupts.
Check if there is an vblank event pending when disabling the display,
and clear it by sending a fake vblank event in that case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-8-stephan@gerhold.net
The DSI initialization sequence incorrectly assumes that the mode_set()
function of the DRM bridge is always called when (re-)enabling the display.
This is not necessarily the case.
Keeping the device idle in the framebuffer console for a while results
in the display being turned off using the disable() function. However,
as soon as any key is pressed only (pre_)enable() are called.
mode_set() is skipped because the mode has not been changed.
In this case, the DSI HS/LP clocks are never turned back on,
preventing the display from working.
Fix this by moving a part of the initialization sequence from
mode_set() to pre_enable(). Keep most of the video mode setup in
mode_set() since most of the registers are only dependent on the mode
that is set for the panel - there is no need to write them again each
time we re-enable the display.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-7-stephan@gerhold.net
Using a (single) DSI display with MCDE currently results in
two "connected" connectors:
Connector: DSI-1
id : 34
encoder id : 0
conn : connected
size : 0x0 (mm)
count_modes : 0
count_props : 5
props : 1 2 5 6 4
count_encoders : 1
encoders : 33
Connector: DSI-2
id : 35
encoder id : 33
conn : connected
size : 53x89 (mm)
count_modes : 1
count_props : 5
props : 1 2 5 6 4
count_encoders : 1
encoders : 33
Mode: "480x800" 480x800 60
Although both show up as connected, the first one does not have
any size and no available modes. This confuses userspace tools
(e.g. kmscube) who look for available modes for the first connector.
The reason for the duplicated connector is that mcde_dsi.c and the
DRM panel bridge helper both set up a DSI connector, with more or less
the same code. The connector set up by the DRM panel bridge is the
one that is correctly set up in the example above.
Therefore we can just remove the connector setup from mcde_dsi.c
and let the DRM core handle all the hard work.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-6-stephan@gerhold.net
The initialization order for DSI video mode is important - if we
enable the video stream generator (VSG) before the MCDE DSI formatter
starts sending pixel data, it will immediately run into an error and
disable itself again.
Avoid this problem by delaying the activation of the VSG
until the MCDE DSI formatter is properly set up and running
(i.e. when mcde_dsi_bridge_enable() is called).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-5-stephan@gerhold.net
Triggering an error conditions in DSI video mode only results in
a very generic "some video mode error status" error message
at the moment.
Make this more clear by adding separate error messages for each bit.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-4-stephan@gerhold.net
The MCDE driver differentiates only between "te_sync"
(for hardware TE0 sync) and software sync
(i.e. manually triggered updates) at the moment.
However, none of these options work correctly for video mode panels.
Therefore, we need to make some changes to make them work correctly:
- Select hardware sync coming from the (DSI) formatter.
- Keep the FIFO permanently enabled (otherwise MCDE will stop
feeding data to the panel).
- Skip manual software sync (this is not necessary in video mode).
Automatically detect if the connected panel is using video mode
and enable the necessary changes in that case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-3-stephan@gerhold.net
At the moment, vblank handling is only enabled together with
TE synchronization. However, the vblank IRQ is also working with
on displays without TE synchronization (e.g. DSI video mode panels).
It seems like the vblank IRQ is actually generated by the
MCDE hardware for the channel.
Therefore, the vblank handling should be working correctly in
all the cases and we can enable it unconditionally.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-2-stephan@gerhold.net
Replace the use of the dev_err macro with the DRM_DEV_ERROR
DRM helper macro. rockchip driver uses almost exclusively DRM_* logging
(aside from 2 dev_* instances, one of which is converted in this patch),
so this makes things more consistent.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
[seanpaul expanded on the commit message]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107092945.15513-1-wambui.karugax@gmail.com
Udl's GEM code and the generic SHMEM are almost identical. Replace
the former with SHMEM. The dmabuf support in udl is being replaced
with generic GEM PRIME functions.
The main difference is in the caching flags for mmap pages. By
default, SHMEM always sets (uncached) write combining. In udl's
memory management code, only imported buffers use write combining.
Memory pages of locally created buffer objects are mmap'ed with
caching enabled. To keep the optimization, udl provides its own
mmap function for GEM objects where it fixes up the mapping flags.
v3:
- restore udl vmap that enables caching
v2:
- remove obsolete code in a separate patch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-4-tzimmermann@suse.de
In preparation of a switch to SHMEM, udl now allocates its GEM
objects via struct drm_driver.gem_create_object. No functional
changes are made.
For SHMEM GEM objects, udl will require the use of a special mmap
function, which we set though the create-object function.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-3-tzimmermann@suse.de
The flags field in struct udl_gem controls mapping parameters: cached
access for local buffers, write-combined access for imported buffers.
We can drop the field and distinguish both cases by testing whether
struct drm_gem_object.import_attach is NULL.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107094307.19870-2-tzimmermann@suse.de
Finally clean up the VMA setup for radeon now that TTM exports the
necessary functions.
No functional change, but only compile tested.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339354/
That is needed by at least a cleanup in radeon.
v2: also export ttm_bo_vm_access
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/339353/
This commit sets the remaining atomic-modesetting helpers and the flag
DRIVER_ATOMIC. Legacy cursor functions are removed in favor of the cursor
plane. For power management, atomic helpers replace the indvidual
operations that the driver currently runs.
Atomic modesetting is enabled with this commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-10-tzimmermann@suse.de
The cursor plane uses an internal format of ARGB4444. To userspace, we
announce ARGB8888 and do the transformation internally.
v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-9-tzimmermann@suse.de
As the CRTC code has already been prepared for a split between mode
setting and plane handling, most of the CRTC's atomic modesetting is
build upon primitives of the non-atomic implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-8-tzimmermann@suse.de
Like the original mode-setting code, the primary plane supports XRGB888,
RGB565 and C8. The plane itself only pins BOs and sets the base address
and scanline offset. The mode-setting code will be located in the CRTC's
atomic helpers.
v2:
* don't set plane call-back functions to NULL explicitly
* define plane format array in global scope
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-7-tzimmermann@suse.de
The implementation of ast_set_vbios_mode() converts a DRM display mode
and framebuffer into an adjusted mode and stores information for the
video BIOS to several scratch regsiters.
Here we split the function into individual functions that do the
conversion, set the VBIOS mode information and format information.
This makes it compatible with support for primary planes and atomic
modesetting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-6-tzimmermann@suse.de
In ast_set_ext_reg() sets several framebuffer options and CRT threshold
parameters. The former is mostly state of the primary plane; the latter
is constant. Hence, split the function in two and make it work with
atomic modesetting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-5-tzimmermann@suse.de
The content of the base-address and offset registers are state of
the primary plane. Clearing it to default values will interfere with
plane functions for atomic mode setting.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-4-tzimmermann@suse.de
Each video mode's primary plane requires a minimum amount of video
memory. For double buffering, this is at most half the available
VRAM. Check this constraint.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107083404.6852-3-tzimmermann@suse.de
The ANX6345 is an ultra-low power DisplayPower/eDP transmitter designed
for portable devices. This driver adds initial support for RGB to eDP
mode, without HPD and interrupts.
This is a configuration usually seen in eDP applications.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135220.590D968BFE@verein.lst.de
Add bit definitions required for the anx6345 and add a
sanity check in anx_dp_aux_transfer.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135218.01C2168C4E@verein.lst.de
Some code can be shared within different DP bridges by Analogix.
Extract them to analogix_dp.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135214.966BD68BFE@verein.lst.de
Some definitions currently in analogix-anx78xx.h are not restricted to
the ANX78xx series, but also applicable to other DisplayPort
transmitters by Analogix.
Split out them to dedicated headers, and make analogix-anx78xx.h include
them.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135212.4D41E68BE1@verein.lst.de
As ANA78xx chips are designed and produced by Analogix Semiconductor,
Inc, move their driver codes into analogix subdirectory.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Torsten Duwe <duwe@suse.de>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20191107135202.2089C68BE1@verein.lst.de
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <b8faad34102a91698b55dfc1ce02b1a90fda5e44.1564591626.git.andrzej.p@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/ <db323a3cdfd643cef65d796e959c16a14f105920.1564591626.git.andrzej.p@collabora.com
Link: https://patchwork.freedesktop.org/patch/msgid/ <b8faad34102a91698b55dfc1ce02b1a90fda5e44.1564591626.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <db323a3cdfd643cef65d796e959c16a14f105920.1564591626.git.andrzej.p@collabora.com
Switch to using the ddc provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <613c1c09ff7db5be60ef86f930b45b3f56b4838d.1564591626.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/ <1e343b02195757bfbf60ca8999cadeb376db204e.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <a1f778d328328f15300338600bb2400850717300.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/ <4cad24dde4508cec17483f983da08226ba7e48b0.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <40293fa4e619d1d1af213a076b1d03440e50c56c.1566845537.git.andrzej.p@collabora.com
Use the ddc pointer provided by the generic connector.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <3c8b030bb89ec5aeafdb3c294cb6b3403d8c0601.1566845537.git.andrzej.p@collabora.com
Few for_each macro set variables that are never used later which led
to generate unused-but-set-variable warnings.
Add (void)(foo) inside the macros to remove these warnings
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008124254.2144-1-benjamin.gaignard@st.com
Legacy (non-atomic) page flip support is added to the driver by using the
mode_set_base CRTC function, that allows configuring a new framebuffer for
display. Since the function requires the primary plane's fb to be set
already, this is done prior to calling the function in the page flip helper
and reverted if the flip fails.
The vblank interrupt handler is also refactored to support passing an event.
The PIPE_TE_STATUS bit is also considered to indicate vblank on medfield
only, as explained in psb_enable_vblank.
It was tested by running weston on both poulsbo and cedartrail.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-3-paul.kocialkowski@bootlin.com
This adds a missing call to drm_crtc_vblank_on to the common DPMS helper
(used by poulsbo and cedartrail), which is called in the CRTC enable path.
With that call, it becomes possible to enable vblank when needed.
It is already balanced by a drm_crtc_vblank_off call in the helper.
Other platforms (oaktrail and medfield) use a dedicated DPMS helper that
does not have the proper vblank on/off hooks. They are not added in this
commit due to lack of hardware to test it with.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106094400.445834-2-paul.kocialkowski@bootlin.com
This replaces the original TODO item for drm_fb_helper_fbdev_setup()
and _teardown(), which are deprecated.
v2:
* remove driver-specific comments
* list some basic requirements
* keep a TODO item on drm_fb_helper_init()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106124727.11641-2-tzimmermann@suse.de
Simplify this function implementation by using a known wrapper function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64a6ea39-3e4b-2ebe-74f7-98720e581e3e@web.de
With nouveau fixed all ttm-using drives have the correct nesting of
mmap_sem vs dma_resv, and we can just lock the buffer.
Assuming I didn't screw up anything with my audit of course.
v2:
- Dont forget wu_mutex (Christian König)
- Keep the mmap_sem-less wait optimization (Thomas)
- Use _lock_interruptible to be good citizens (Thomas)
v3: Rebase over fault handler helperification.
Reviewed-by: Christian König <christian.koenig@amd.com> (v2)
Reviewed-by: Thomas Hellström <thellstrom@vmware.com> (v2)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-3-daniel.vetter@ffwll.ch
We can't copy_*_user while holding reservations, that will (soon even
for nouveau) lead to deadlocks. And it breaks the cross-driver
contract around dma_resv.
Fix this by adding a slowpath for when we need relocations, and by
pushing the writeback of the new presumed offsets to the very end.
Aside from "it compiles" entirely untested unfortunately.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-2-daniel.vetter@ffwll.ch
Full audit of everyone:
- i915, radeon, amdgpu should be clean per their maintainers.
- vram helpers should be fine, they don't do command submission, so
really no business holding struct_mutex while doing copy_*_user. But
I haven't checked them all.
- panfrost seems to dma_resv_lock only in panfrost_job_push, which
looks clean.
- v3d holds dma_resv locks in the tail of its v3d_submit_cl_ioctl(),
copying from/to userspace happens all in v3d_lookup_bos which is
outside of the critical section.
- vmwgfx has a bunch of ioctls that do their own copy_*_user:
- vmw_execbuf_process: First this does some copies in
vmw_execbuf_cmdbuf() and also in the vmw_execbuf_process() itself.
Then comes the usual ttm reserve/validate sequence, then actual
submission/fencing, then unreserving, and finally some more
copy_to_user in vmw_execbuf_copy_fence_user. Glossing over tons of
details, but looks all safe.
- vmw_fence_event_ioctl: No ttm_reserve/dma_resv_lock anywhere to be
seen, seems to only create a fence and copy it out.
- a pile of smaller ioctl in vmwgfx_ioctl.c, no reservations to be
found there.
Summary: vmwgfx seems to be fine too.
- virtio: There's virtio_gpu_execbuffer_ioctl, which does all the
copying from userspace before even looking up objects through their
handles, so safe. Plus the getparam/getcaps ioctl, also both safe.
- qxl only has qxl_execbuffer_ioctl, which calls into
qxl_process_single_command. There's a lovely comment before the
__copy_from_user_inatomic that the slowpath should be copied from
i915, but I guess that never happened. Try not to be unlucky and get
your CS data evicted between when it's written and the kernel tries
to read it. The only other copy_from_user is for relocs, but those
are done before qxl_release_reserve_list(), which seems to be the
only thing reserving buffers (in the ttm/dma_resv sense) in that
code. So looks safe.
- A debugfs file in nouveau_debugfs_pstate_set() and the usif ioctl in
usif_ioctl() look safe. nouveau_gem_ioctl_pushbuf() otoh breaks this
everywhere and needs to be fixed up.
v2: Thomas pointed at that vmwgfx calls dma_resv_init while it holds a
dma_resv lock of a different object already. Christian mentioned that
ttm core does this too for ghost objects. intel-gfx-ci highlighted
that i915 has similar issues.
Unfortunately we can't do this in the usual module init functions,
because kernel threads don't have an ->mm - we have to wait around for
some user thread to do this.
Solution is to spawn a worker (but only once). It's horrible, but it
works.
v3: We can allocate mm! (Chris). Horrible worker hack out, clean
initcall solution in.
v4: Annotate with __init (Rob Herring)
Cc: Rob Herring <robh@kernel.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: "VMware Graphics" <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104173801.2972-1-daniel.vetter@ffwll.ch
