This series is based on v5.10-rc1.
The patchsets add support for MediaTek hardware module named DVFSRC
(dynamic voltage and frequency scaling resource collector). The DVFSRC is
a HW module which is used to collect all the requests from both software
and hardware and turn into the decision of minimum operating voltage and
minimum DRAM frequency to fulfill those requests.
So, This series is to implement the dvfsrc driver to collect all the
requests of operating voltage or DRAM bandwidth from other device drivers
likes GPU/Camera through 3 frameworks basically:
1. interconnect framework: to aggregate the bandwidth
requirements from different clients
[1] https://patchwork.kernel.org/cover/10766329/
There has a hw module "DRAM scheduler", which used to control the throughput.
The DVFSRC will collect forecast data of dram bandwidth from
SW consumers(camera/gpu...), and according the forecast to change the DRAM
frequency
2. Regualtor framework: to handle the operating voltage requirement from user or
cosumer which not belong any power domain
Changes in V6:
* Remove the performace state support, because the request from consumer can be
replaced by using interconnect and regulator framework.
* Update the DT patches and convert them to DT schema. (Georgi)
* Modify the comment format and coding style. (Mark)
Changes in V5:
* Support more platform mt6873/mt8192
* Drop the compatible and interconnect provider node and make the parent node an
interconnect provider. (Rob/Georgi)
* Make modification of interconnect driver from coding suggestion. (Georgi)
* Move interconnect diagram into the commit text of patch. (Georgi)
* Register the interconnect provider as a platform sub-device. (Georgi)
Changes in V4:
* Add acked TAG on dt-bindings patches. (Rob)
* Declaration of emi_icc_aggregate since the prototype of aggregate function
has changed meanwhile. (Georgi)
* Used emi_icc_remove instead of icc_provider_del on probe. (Georgi)
* Add dvfsrc regulator driver into series.
* Bug fixed of mt8183_get_current_level.
* Add mutex protection for pstate operation on dvfsrc_set_performance.
Changes in V3:
* Remove RFC from the subject prefix of the series
* Combine dt-binding patch and move interconnect dt-binding document into
dvfsrc. (Rob)
* Remove unused header, add unit descirption to the bandwidth, rename compatible
name on interconnect driver. (Georgi)
* Fixed some coding style: check flow, naming, used readx_poll_timeout
on dvfsrc driver. (Ryan)
* Rename interconnect driver mt8183.c to mtk-emi.c
* Rename interconnect header mtk,mt8183.h to mtk,emi.h
* mtk-scpsys.c: Add opp table check first to avoid OF runtime parse failed
Changes in RFC V2:
* Remove the DT property dram_type. (Rob)
* Used generic dts property 'opp-level' to get the performace state. (Stephen)
* Remove unecessary dependency config on Kconfig. (Stephen)
* Remove unused header file, fixed some coding style issue, typo,
error handling on dvfsrc driver. (Nicolas/Stephen)
* Remove irq handler on dvfsrc driver. (Stephen)
* Remove init table on dvfsrc driver, combine hw init on trustzone.
* Add interconnect support of mt8183 to aggregate the emi bandwidth.
(Georgi)
V5: https://patchwork.kernel.org/project/linux-mediatek/list/?series=348065
V4: https://lore.kernel.org/patchwork/cover/1209284/
V3: https://patchwork.kernel.org/cover/11118867/
RFC V2: https://lore.kernel.org/patchwork/patch/1068113/
RFC V1: https://lore.kernel.org/patchwork/cover/1028535/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
The ROHM PMIC regulator drivers only need the regmap pointer from
the parent device. Regmap can be obtained via dev_get_regmap()
so do not require parent to populate driver data for that.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/20210105130221.GA3438042@localhost.localdomain
Signed-off-by: Mark Brown <broonie@kernel.org>
Driver for regulators exposed by the DVFSRC (dynamic voltage and
frequency scaling resource collector) found in devices based on
mt8183 and newer platforms.
Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
Link: https://lore.kernel.org/r/1608790134-27425-12-git-send-email-henryc.chen@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
PM8009 has special revision (P=1), which is to be used for sm8250
platform. The major difference is the S2 regulator which supplies 0.95 V
instead of 2.848V. Declare regulators data to be used for this chip
revision. The datasheet calls the chip just pm8009-1, so use the same
name.
base-commit: 5c8fe583cc
The function regulator_set_device_supply() is referenced a few times in
comments in regulator/core.c; however this function was removed a long
time ago by commit a5766f11cf ("regulator: core - Rework machine API to
remove string based functions."). Update those references to point to
set_consumer_device_supply(), which replaced the old function.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Link: https://lore.kernel.org/r/20210103165541.784360-1-djrscally@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A built-in regulator driver cannot link against a modular cmd_db driver:
qcom-rpmh-regulator.c:(.text+0x174): undefined reference to `cmd_db_read_addr'
There is already a dependency for RPMh, so add another one of this
type for cmd_db.
Fixes: 34c5aa2666 ("regulator: Kconfig: Fix REGULATOR_QCOM_RPMH dependencies to avoid build error")
Fixes: 46fc033eba ("regulator: add QCOM RPMh regulator driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201230145712.3133110-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
PM8009 has special revision (P=1), which is to be used for sm8250
platform. The major difference is the S2 regulator which supplies 0.95 V
instead of 2.848V. Declare regulators data to be used for this chip
revision. The datasheet calls the chip just pm8009-1, so use the same
name.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-4-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the datasheet pm8009's HFS515 regulators have 16mV
resolution rather than declared 1.6 mV. Correct the resolution.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 06369bcc15 ("regulator: qcom-rpmh: Add support for SM8150")
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20201231122348.637917-3-dmitry.baryshkov@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for the DC-DC converters and LDO regulators found in
the ATC2603C and ATC2609A chip variants of the Actions Semi ATC260x
family of PMICs.
Co-developed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Link: https://lore.kernel.org/r/1117b1a01b3948446cb3cc407e52de3a5d4212b0.1609258905.git.cristian.ciocaltea@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Restrict REGULATOR_QCOM_RPMH to QCOM_COMMAND_DB it the latter is enabled.
Fixes this build error:
microblaze-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_probe':
(.text+0x354): undefined reference to `cmd_db_read_addr'
Fixes: 778279f4f5 ("soc: qcom: cmd-db: allow loading as a module")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Reviewed-by: Lina Iyer <ilina@codeaurora.org>
Link: https://lore.kernel.org/r/20201225185004.20747-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the typical startup times from the data sheet so boards get a
reasonable default. Not setting any enable time can lead to board hangs
when e.g. clocks are enabled too soon afterwards.
This fixes gpu power domain resume on the Librem 5.
[Moved #defines into driver, seems to be general agreement and avoids any
cross tree issues -- broonie]
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/41fb2ed19f584f138336344e2297ae7301f72b75.1608316658.git.agx@sigxcpu.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The pf8x00 driver supports three devices, the DT compatible strings
and I2C IDs should enumerate these specifically rather than using a
wildcard so that we don't collide with anything incompatible in the
same ID range in the future and so that we can handle any software
visible differences between the variants we find.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20201215132024.13356-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201210212748.5849-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add proper modalias structures to let this driver load automatically if
compiled as module, because max14577 MFD driver creates MFD cells with
such compatible strings.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210112139.5370-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes a couple of bugs in the DA9121 driver.
One in an uninialised string I forgot to remove when changing to of_parse_cb()
The other is an index for an optional DT property which overflows
Adam Ward (2):
regulator: da9121: Remove uninitialised string variable
regulator: da9121: Fix index used for DT property
drivers/regulator/da9121-regulator.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--
1.9.1
There is a missing "return ret;" on this error path so we call
"da9121_check_device_type(i2c, chip);" which will end up dereferencing
"chip->regmap" and lead to an Oops.
Fixes: c860476b9e ("regulator: da9121: Add device variant regmaps")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/X85soGKnWAjPUA7a@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
When I use the axp20x chip to power my SDIO device on the 5.4 kernel,
the output voltage of DLDO2 is wrong. After comparing the register
manual and source code of the chip, I found that the mask bit of the
driver register of the port was wrong. I fixed this error by modifying
the mask register of the source code. This error seems to be a copy
error of the macro when writing the code. Now the voltage output of
the DLDO2 port of axp20x is correct. My development environment is
Allwinner A40I of arm architecture, and the kernel version is 5.4.
Signed-off-by: DingHua Ma <dinghua.ma.sz@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Cc: <stable@vger.kernel.org>
Fixes: db4a555f7c ("regulator: axp20x: use defines for masks")
Link: https://lore.kernel.org/r/20201201001000.22302-1-dinghua.ma.sz@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support from RPMH regulators found in PM8350 and PM8350c PMICs
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201203071244.2652297-2-vkoul@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_GPIOLIB is disabled, the declarations from linux/gpio/consumer.h
are not visible:
drivers/regulator/da9121-regulator.c:371:14: error: implicit declaration of function 'fwnode_gpiod_get_index' [-Werror,-Wimplicit-function-declaration]
ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), "enable", 0,
^
drivers/regulator/da9121-regulator.c:372:7: error: use of undeclared identifier 'GPIOD_OUT_HIGH'
GPIOD_OUT_HIGH |
^
drivers/regulator/da9121-regulator.c:373:7: error: use of undeclared identifier 'GPIOD_FLAGS_BIT_NONEXCLUSIVE'
GPIOD_FLAGS_BIT_NONEXCLUSIVE,
Include this explicitly to help compile testing.
Fixes: 46c413d5bb ("regulator: da9121: Add support for device variants via devicetree")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201204165229.3754763-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the following sparse warnings:
drivers/regulator/da9121-regulator.c:55:21: warning: symbol 'da9121_10A_2phase_current' was not declared. Should it be static?
drivers/regulator/da9121-regulator.c:63:21: warning: symbol 'da9121_6A_2phase_current' was not declared. Should it be static?
drivers/regulator/da9121-regulator.c:71:21: warning: symbol 'da9121_5A_1phase_current' was not declared. Should it be static?
drivers/regulator/da9121-regulator.c:79:21: warning: symbol 'da9121_3A_1phase_current' was not declared. Should it be static?
drivers/regulator/da9121-regulator.c:151:32: warning: symbol 'status_event_handling' was not declared. Should it be static?
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Acked-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/1606994795-36182-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds interrupt handler for variants, and notifications for events; over
temperature/voltage/current. Because the IRQs are triggered by persisting
status, they must be masked and the status polled until clear, before the
IRQ can be enabled again.
Signed-off-by: Adam Ward <Adam.Ward.opensource@diasemi.com>
Link: https://lore.kernel.org/r/fe21796bbcbadff84a472a4cc581ae8fafc7f8f5.1606755367.git.Adam.Ward.opensource@diasemi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add NXP PF8100/PF8121A/PF8200 regulator driver.
PF8100/PF8121A/PF8200 is PMIC designed for highperformance
consumer applications. It features seven high efficiency buck,
four linear and one vsnvs regulators.
Tested in Engicam i.Core MX8M Mini SOM platform boards.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20201130112329.104614-2-jagan@amarulasolutions.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Selectors lower than linear_min_sel should not be considered invalid.
Thus return zero in case _regulator_list_voltage(),
regulator_list_hardware_vsel() or regulator_list_voltage_table()
receives such selectors as argument.
Fixes: bdcd117757 ("regulator: core: validate selector against linear_min_sel")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1606325147-606-1-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The kernel test robot reported the following build error:
All errors (new ones prefixed by >>):
xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_vrm_get_voltage_sel':
qcom-rpmh-regulator.c:(.text+0x270): undefined reference to `rpmh_write'
xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_send_request':
qcom-rpmh-regulator.c:(.text+0x2f2): undefined reference to `rpmh_write'
xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_vrm_get_voltage_sel':
>> qcom-rpmh-regulator.c:(.text+0x274): undefined reference to `rpmh_write_async'
xtensa-linux-ld: drivers/regulator/qcom-rpmh-regulator.o: in function `rpmh_regulator_send_request':
qcom-rpmh-regulator.c:(.text+0x2fc): undefined reference to `rpmh_write_async'
Which is due to REGULATOR_QCOM_RPMH depending on
QCOM_RPMH || COMPILE_TEST. The problem is that QOM_RPMH can now
be a module, which in that case requires REGULATOR_QCOM_RPMH=m
to build.
However, if COMPILE_TEST is enabled, REGULATOR_QCOM_RPMH can be
set to =y while QCOM_RPMH=m which will cause build failures.
The fix here is to add (QCOM_RPMH=n && COMPILE_TEST) to the
dependency.
Feedback would be appreciated!
Cc: Todd Kjos <tkjos@google.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Maulik Shah <mkshah@codeaurora.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201123222359.103822-1-john.stultz@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a simple regulator based on SCMI Voltage Domain Protocol.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
----
v6 --> v7
- add proper blank lines between semantic blocks
- fix return value on error path of scmi_reg_is_enabled()
- use generic Failure message on err path of info_get()
- fix comment containing apostrophe
v3 --> v4
- using of_match_full_name core regulator flag
- avoid coccinelle falde complaints about pointer-sized allocations
v2 --> v3
- remove multiple linear mappings support
- removed duplicated voltage name printout
- added a few comments
- simplified return path in scmi_reg_set_voltage_sel()
v1 --> v2
- removed duplicate regulator naming
- removed redundant .get/set_voltage ops: only _sel variants implemented
- removed condexpr on fail path to increase readability
v0 --> v1
- fixed init_data constraint parsing
- fixes for v5.8 (linear_range.h)
- fixed commit message content and subject line format
- factored out SCMI core specific changes to distinct patch
- reworked Kconfig and Makefile to keep proper alphabetic order
- fixed SPDX comment style
- removed unneeded inline functions
- reworked conditionals for legibility
- fixed some return paths to properly report SCMI original errors codes
- added some more descriptive error messages when fw returns invalid ranges
- removed unneeded explicit devm_regulator_unregister from .remove()
Link: https://lore.kernel.org/r/20201123202336.46701-4-cristian.marussi@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
this series introduces the support for the new SCMI Voltage Domain Protocol
defined by the upcoming SCMIv3.0 specification, whose BETA release is
available at [1].
Afterwards, a new generic SCMI Regulator driver is developed on top of the
new SCMI VD Protocol.
In V4 Patch 3/5 introduced a needed fix in Regulator framework to cope with
generic named nodes.
The series is currently based on for-next/scmi [2] on top of:
commit b141fca08207 ("firmware: arm_scmi: Fix missing destroy_workqueue()")
Any feedback welcome,
Thanks,
Cristian
---
v5 --> v6
- reordered dt bindings patch
- removed single field struct
- reviewed args to scmi_init_voltage_levels()
- allocating scmi_voltage_info_array contiguously
v4 --> v5
- rebased
- VD Protocol
- removed inline
- moved segmented intervals defines
- fixed some macros complaints by checkpatch
v3 --> v4
- DT bindings
- using generic node names
- listing explicitly subset of supported regulators bindings
- SCMI Regulator
- using of_match_full_name core regulator flag
- avoid coccinelle false flag complaints
- VD Protocol
- avoid coccinelle false flag complaints
- avoiding fixed size typing
v2 --> v3
- DT bindings
- avoid awkard examples based on _cpu/_gpu regulators
- SCMI Regulator
- remove multiple linear mappings support
- removed duplicated voltage name printout
- added a few comments
- simplified return path in scmi_reg_set_voltage_sel()
- VD Protocol
- restrict segmented voltage domain descriptors to one triplet
- removed unneeded inline
- free allocated resources for invalid voltage domain
- added __must_check to info_get voltage operations
- added a few comments
- removed fixed size typing from struct voltage_info
v1 --> v2
- rebased on for-next/scmi v5.10
- DT bindings
- removed any reference to negative voltages
- SCMI Regulator
- removed duplicate regulator naming
- removed redundant .get/set_voltage ops: only _sel variants implemented
- removed condexpr on fail path to increase readability
- VD Protocol
- fix voltage levels query loop to reload full cmd description
between iterations as reported by Etienne Carriere
- ensure transport rx buffer is properly sized calli scmi_reset_rx_to_maxsz
between transfers
[1]:https://developer.arm.com/documentation/den0056/c/
[2]:https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux.git/log/?h=for-next/scmi
Cristian Marussi (5):
firmware: arm_scmi: Add Voltage Domain Support
firmware: arm_scmi: add SCMI Voltage Domain devname
regulator: core: add of_match_full_name boolean flag
dt-bindings: arm: add support for SCMI Regulators
regulator: add SCMI driver
.../devicetree/bindings/arm/arm,scmi.txt | 43 ++
drivers/firmware/arm_scmi/Makefile | 2 +-
drivers/firmware/arm_scmi/common.h | 1 +
drivers/firmware/arm_scmi/driver.c | 3 +
drivers/firmware/arm_scmi/voltage.c | 380 ++++++++++++++++
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/of_regulator.c | 8 +-
drivers/regulator/scmi-regulator.c | 409 ++++++++++++++++++
include/linux/regulator/driver.h | 3 +
include/linux/scmi_protocol.h | 64 +++
11 files changed, 920 insertions(+), 3 deletions(-)
create mode 100644 drivers/firmware/arm_scmi/voltage.c
create mode 100644 drivers/regulator/scmi-regulator.c
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
During regulators registration, if .of_match and .regulators_node are
defined as non-null strings in struct regulator_desc the core searches the
DT subtree rooted at .regulators_node trying to match, at first, .of_match
against the 'regulator-compatible' property and, then, falling back to use
the name of the node itself to determine a good match.
Property 'regulator-compatible', though, is now deprecated and falling back
to match against the node name, works fine only as long as the involved
nodes are named in an unique way across the searched subtree; if that's not
the case, like when using <common-name>@<unit> style naming for properties
indexed via 'reg' property (as advised by the standard), the above matching
mechanism based on the simple common name will lead to multiple matches and
the only viable alternative would be to properly define the now deprecated
'regulator-compatible' as the node full name, i.e. <common-name>@<unit>.
In order to address this case without using such deprecated binding, define
a new boolean flag .of_match_full_name in struct regulator_desc to force
the core to match against the node full-name instead of the plain name.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20201119191051.46363-4-cristian.marussi@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the start of driver initialization, we do not know what bias
setting the bootloader has configured the system for and we only know
for certain the very first time we do a transition.
However, since the initial value of the comparison index is -EINVAL,
this negative value results in an array out of bound access on the
very first transition.
Since we don't know what the setting is, we just set the bias
configuration as there is nothing to compare against. This prevents
the array out of bound access.
NOTE: Even though we could use a more relaxed check of "< 0" the only
valid values(ignoring cosmic ray induced bitflips) are -EINVAL, 0+.
Fixes: 40b1936efe ("regulator: Introduce TI Adaptive Body Bias(ABB) on-chip LDO driver")
Link: https://lore.kernel.org/linux-mm/CA+G9fYuk4imvhyCN7D7T6PMDH6oNp6HDCRiTUKMQ6QXXjBa4ag@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20201118145009.10492-1-nm@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
This series adds support for ramp delay on mcp16502. It also adds
some cleanup on mcp16502.
Apart from that patches 1/6 fixes the selector validation in case
the regulator::desc::linear_min_sel is not zero.
Thank you,
Claudiu Beznea
Changes in v3:
- fix compilation error in patch 5/6
Reported-by: kernel test robot <lkp@intel.com>
Changes in v2:
- rebase on top of regulator/for-next
- checked 1/6 and 3/6 applies on top of regulator/for-5.10
Claudiu Beznea (6):
regulator: core: validate selector against linear_min_sel
regulator: core: do not continue if selector match
regulator: mcp16502: add linear_min_sel
regulator: mcp16502: adapt for get/set on other registers
regulator: mcp16502: add support for ramp delay
regulator: mcp16502: remove void documentation of struct mcp16502
drivers/regulator/core.c | 12 +++-
drivers/regulator/helpers.c | 3 +-
drivers/regulator/mcp16502.c | 135 ++++++++++++++++++++++++++++++++++++-------
3 files changed, 127 insertions(+), 23 deletions(-)
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.orghttp://lists.infradead.org/mailman/listinfo/linux-arm-kernel
