Pull uaccess.h prepwork from Al Viro:
"Preparations to tree-wide switch to use of linux/uaccess.h (which,
obviously, will allow to start unifying stuff for real). The last step
there, ie
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
`git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`
is not taken here - I would prefer to do it once just before or just
after -rc1. However, everything should be ready for it"
* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove a stray reference to asm/uaccess.h in docs
sparc64: separate extable_64.h, switch elf_64.h to it
score: separate extable.h, switch module.h to it
mips: separate extable.h, switch module.h to it
x86: separate extable.h, switch sections.h to it
remove stray include of asm/uaccess.h from cacheflush.h
mn10300: remove a bogus processor.h->uaccess.h include
xtensa: split uaccess.h into C and asm sides
bonding: quit messing with IOCTL
kill __kernel_ds_p off
mn10300: finish verify_area() off
frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
exceptions: detritus removal
Pull protection keys syscall interface from Thomas Gleixner:
"This is the final step of Protection Keys support which adds the
syscalls so user space can actually allocate keys and protect memory
areas with them. Details and usage examples can be found in the
documentation.
The mm side of this has been acked by Mel"
* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkeys: Update documentation
x86/mm/pkeys: Do not skip PKRU register if debug registers are not used
x86/pkeys: Fix pkeys build breakage for some non-x86 arches
x86/pkeys: Add self-tests
x86/pkeys: Allow configuration of init_pkru
x86/pkeys: Default to a restrictive init PKRU
pkeys: Add details of system call use to Documentation/
generic syscalls: Wire up memory protection keys syscalls
x86: Wire up protection keys system calls
x86/pkeys: Allocation/free syscalls
x86/pkeys: Make mprotect_key() mask off additional vm_flags
mm: Implement new pkey_mprotect() system call
x86/pkeys: Add fault handling for PF_PK page fault bit
When doing an nmi backtrace of many cores, most of which are idle, the
output is a little overwhelming and very uninformative. Suppress
messages for cpus that are idling when they are interrupted and just
emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN".
We do this by grouping all the cpuidle code together into a new
.cpuidle.text section, and then checking the address of the interrupted
PC to see if it lies within that section.
This commit suitably tags x86 and tile idle routines, and only adds in
the minimal framework for other architectures.
Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Thompson <daniel.thompson@linaro.org> [arm]
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Aaron Tomlin <atomlin@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0;
- make kernel load address configurable;
- clean up kernel memory layout macros;
- drop sysmem early allocator and switch to memblock;
- enable kmemleak and memory reservation from the device tree;
- wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range,
preadv2 and pwritev2;
- add new platform: Cadence Configurable System Platform (CSP) and new
core variant for it: xt_lnx;
- rearrange CCOUNT calibration code, make most of it generic;
- improve machine reset code (XTFPGA now reboots reliably with MMUv3
cores);
- provide default memmap command line option for configurations without
device tree support;
- ISS fixes: simdisk is now capable of using highmem pages, panic
correctly terminates simulator.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8HqU
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
"Updates for the xtensa architecture. It is a combined set of patches
for 4.8 that never got to the mainline and new patches for 4.9.
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0
- make kernel load address configurable
- clean up kernel memory layout macros
- drop sysmem early allocator and switch to memblock
- enable kmemleak and memory reservation from the device tree
- wire up new syscalls: userfaultfd, membarrier, mlock2,
copy_file_range, preadv2 and pwritev2
- add new platform: Cadence Configurable System Platform (CSP) and
new core variant for it: xt_lnx
- rearrange CCOUNT calibration code, make most of it generic
- improve machine reset code (XTFPGA now reboots reliably with MMUv3
cores)
- provide default memmap command line option for configurations
without device tree support
- ISS fixes: simdisk is now capable of using highmem pages, panic
correctly terminates simulator"
* tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits)
xtensa: disable MMU initialization option on MMUv2 cores
xtensa: add default memmap and mmio32native options to defconfigs
xtensa: add default memmap option to common_defconfig
xtensa: add default memmap option to iss_defconfig
xtensa: ISS: allow simdisk to use high memory buffers
xtensa: ISS: define simc_exit and use it instead of inline asm
xtensa: xtfpga: group platform_* functions together
xtensa: rearrange CCOUNT calibration
xtensa: xtfpga: use clock provider, don't update DT
xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.
xtensa: initialize MMU before jumping to reset vector
xtensa: fix icountlevel setting in cpu_reset
xtensa: extract common CPU reset code into separate function
xtensa: Added Cadence CSP kernel configuration for Xtensa
xtensa: fix default kernel load address
xtensa: wire up new syscalls
xtensa: support reserved-memory DT node
xtensa: drop sysmem and switch to memblock
xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}
xtensa: cleanup MMU setup and kernel layout macros
...
MMU initialization option is currently ignored on MMUv2 cores, but it is
used in Kconfig to select kernel load and start addresses. This choice
is not available for MMUv2 cores as they have hardwired TLB entries.
Disable MMU initialization option for known MMUv2 cores so that they get
correct kernel load/start address by default.
This fixes the default allmodconfig build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that memory initialization doesn't add default memory region
specify it explicitly in the memmap command line option in case somebody
wants to boot in non-DT-enabled configuration.
While at it update earlycon access mode to mmio32native to support both
LE and BE cores transparently.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that memory initialization doesn't add default memory region specify
it explicitly in the memmap command line option.
Save common_defconfig as defconfig so that it doesn't have all option
settings in it, only those that are different from the Kconfig defaults.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that memory initialization doesn't add default memory region specify
it explicitly in the memmap command line option.
Save iss_defconfig as defconfig so that it doesn't have all option
settings in it, only those that are different from the Kconfig defaults.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
ISS kernel by default has only low memory. But it may be configured to
support high memory and started in a simulator with more than 128M of
RAM. Simdisk driver in such configuration can get IO request with a
high memory page. There may be no TLB entry for that page, only page
table entry. However simulators don't do pagewalking, so such IO request
will fail. Touch IO buffer in the buffer read/write loop so that a TLB
entry is likely there when read or write simcall is invoked.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
A number of ISS platform functions use inline assembly to invoke
simulator exit, not all correctly. Define simc_exit(exit_code) and use
it instead of inline assembly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Group platform_* functions together and turn two separate #ifdef/#ifndef
blocks into single #ifdef/#else. No functional changes.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
DT-enabled kernel should have a CPU node connected to a clock. This clock
is the CCOUNT clock. Use old platform_calibrate_ccount call as a fallback
when CPU node cannot be found or has no clock and in non-DT-enabled
configurations.
Drop no longer needed code that updates CPU clock-frequency property in
the DT; drop DT-related code from the platform_calibrate_ccount too.
Move of_clk_init to the top of time_init, so that clocks are initialized
before CCOUNT calibration is attempted.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Instead of querying hardcoded FPGA frequency register and then updating
clock-frequency property in specificly named DT nodes in machine setup
code register a clock provider that returns fixed-rate clock, configured
by register specified in DT. This way we have less magic/hardcoded names
and use more existing common clock framework code.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Add module parameter xilinx_uartps.rx_trigger_level=32 to command line
options for CSP to set Rx watermark for xuartps driver lower than the
default value, to avoid UART overruns at 115200 bps.
Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
When reset is simulated MMU need to be brought into its initial state,
because that's what bootloaders/OS kernels assume. This is especially
important for MMUv3 because TLB state when the kernel is running is
significatly different from its reset state.
With this change it is possible to boot linux and get back to U-Boot
repeatedly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
icountlevel SR value specifies lowest intlevel that does not do
instruction counting, so to disable instruction counting completely it
must be set to 0, not to 15.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
platform_restart implementatations do the same thing to reset CPU.
Don't duplicate that code, move it to a function and call it from
platform_restart.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Added defconfig, device tree and Xtensa variant header files for the
Cadence Configurable System Platform "xt_lnx" processor configuration.
Signed-off-by: Scott Telford <stelford@cadence.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make default kernel load address 0xd0003000 for MMUv2 cores and
0x60003000 for noMMU cores. Don't initialize MMU inside vmlinux for
predefined MMUv2 cores (it's noop anyway).
This fixes the following defconfig build error:
arch/xtensa/kernel/built-in.o: In function `fast_alloca':
(.text+0x99a): dangerous relocation: j: cannot encode: _WindowUnderflow12
arch/xtensa/kernel/built-in.o: In function `fast_alloca':
(.text+0x99d): dangerous relocation: j: cannot encode: _WindowUnderflow8
arch/xtensa/kernel/built-in.o: In function `fast_alloca':
(.text+0x9a0): dangerous relocation: j: cannot encode: _WindowUnderflow4
arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup':
(.text+0x23a3): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104)
arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup':
(.text+0x23c1): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104)
arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup':
(.text+0x23dd): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104)
With this change all xtensa defconfigs build correctly.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This patch adds two new system calls:
int pkey_alloc(unsigned long flags, unsigned long init_access_rights)
int pkey_free(int pkey);
These implement an "allocator" for the protection keys
themselves, which can be thought of as analogous to the allocator
that the kernel has for file descriptors. The kernel tracks
which numbers are in use, and only allows operations on keys that
are valid. A key which was not obtained by pkey_alloc() may not,
for instance, be passed to pkey_mprotect().
These system calls are also very important given the kernel's use
of pkeys to implement execute-only support. These help ensure
that userspace can never assume that it has control of a key
unless it first asks the kernel. The kernel does not promise to
preserve PKRU (right register) contents except for allocated
pkeys.
The 'init_access_rights' argument to pkey_alloc() specifies the
rights that will be established for the returned pkey. For
instance:
pkey = pkey_alloc(flags, PKEY_DENY_WRITE);
will allocate 'pkey', but also sets the bits in PKRU[1] such that
writing to 'pkey' is already denied.
The kernel does not prevent pkey_free() from successfully freeing
in-use pkeys (those still assigned to a memory range by
pkey_mprotect()). It would be expensive to implement the checks
for this, so we instead say, "Just don't do it" since sane
software will never do it anyway.
Any piece of userspace calling pkey_alloc() needs to be prepared
for it to fail. Why? pkey_alloc() returns the same error code
(ENOSPC) when there are no pkeys and when pkeys are unsupported.
They can be unsupported for a whole host of reasons, so apps must
be prepared for this. Also, libraries or LD_PRELOADs might steal
keys before an application gets access to them.
This allocation mechanism could be implemented in userspace.
Even if we did it in userspace, we would still need additional
user/kernel interfaces to tell userspace which keys are being
used by the kernel internally (such as for execute-only
mappings). Having the kernel provide this facility completely
removes the need for these additional interfaces, or having an
implementation of this in userspace at all.
Note that we have to make changes to all of the architectures
that do not use mman-common.h because we use the new
PKEY_DENY_ACCESS/WRITE macros in arch-independent code.
1. PKRU is the Protection Key Rights User register. It is a
usermode-accessible register that controls whether writes
and/or access to each individual pkey is allowed or denied.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-arch@vger.kernel.org
Cc: Dave Hansen <dave@sr71.net>
Cc: arnd@arndb.de
Cc: linux-api@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: luto@kernel.org
Cc: akpm@linux-foundation.org
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/20160729163015.444FE75F@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer. Thus the pointer can point to const data.
However the attributes do not have to be a bitfield. Instead unsigned
long will do fine:
1. This is just simpler. Both in terms of reading the code and setting
attributes. Instead of initializing local attributes on the stack
and passing pointer to it to dma_set_attr(), just set the bits.
2. It brings safeness and checking for const correctness because the
attributes are passed by value.
Semantic patches for this change (at least most of them):
virtual patch
virtual context
@r@
identifier f, attrs;
@@
f(...,
- struct dma_attrs *attrs
+ unsigned long attrs
, ...)
{
...
}
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
and
// Options: --all-includes
virtual patch
virtual context
@r@
identifier f, attrs;
type t;
@@
t f(..., struct dma_attrs *attrs);
@@
identifier r.f;
@@
f(...,
- NULL
+ 0
)
Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0;
- make kernel load address configurable;
- clean up kernel memory layout macros;
- drop sysmem early allocator and switch to memblock;
- enable kmemleak and memory reservation from the device tree;
- wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range,
preadv2 and pwritev2.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJXnX9MAAoJEFH5zJH4P6BEq40P/3oAbO64xMyHG9iOBlCi2xkz
c1P5f5Y0ZogVn2ItlIZgNbRCQd7U0UyUX6fcKpBA288zSgBWVVCh0PeEamA6MWgg
PY4qXIwa7UxAF0iH5YIj++PAdcxAuv0ZjkGty7i68Ve4Ah2oRK5hCqDMo69VCGO4
yEIUn7Z/Yg6k3NuccUYWJKIuv6NUc7ZOBhxXxoEGe9ARKmsE2Ci2yZ7AEfxzK9EA
74fKzlhbOxnKdCqe2/CJ8Mh7/dlHMtzGgUq+PAQETc9hMKYZcyWlKHItsc2ISToX
cvRk7z+8wNZvRVU/6ilL8dro85KbrMNch+n0DRD8BmjDB++3AO0TnR+5EZNAmXKO
/XRDyAmqtMHN/JwuKbs4ABWATdlM9ccha1HPo+ft2Ww0sfqMoIQLlgznluXOpDh5
1KhV9EGKISGd+M67eG1ab6nkqntddW4M6OYeUPJzNCHzyc0r9azinurm9s09T11R
9onr2ChQfbAUhKI1xex9MWwk+JJj6Z7ADKpIYNNz7lpvWf3tuL34pdw6cx0V5eFX
Khw94DBonzKMMrnsEaCT1u4Iu3Wi6TBGJIKu8YO+oLemauFOUoOmU4HgoW4gnVgt
4N0k4rFiA/6lhBRH/wlDDmEDbmNbetfIK8DjtFNPruxG0sbRsE+OqJAWxS3DFywv
YUmqpsAJgC2VfnUaihyU
=HUkh
-----END PGP SIGNATURE-----
Merge tag 'xtensa-for-next-20160731' of git://github.com/jcmvbkbc/linux-xtensa into for_next
Xtensa improvements for 4.8:
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0;
- make kernel load address configurable;
- clean up kernel memory layout macros;
- drop sysmem early allocator and switch to memblock;
- enable kmemleak and memory reservation from the device tree;
- wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range,
preadv2 and pwritev2.
- Removal of most of_platform_populate() calls in arch code. Now the DT
core code calls it in the default case and platforms only need to call
it if they have special needs.
- Use pr_fmt on all the DT core print statements.
- CoreSight binding doc improvements to block name descriptions.
- Add dt_to_config script which can parse dts files and list
corresponding kernel config options.
- Fix memory leak hit with a PowerMac DT.
- Correct a bunch of STMicro compatible strings to use the correct
vendor prefix.
- Fix DA9052 PMIC binding doc to match what is actually used in dts
files.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wLMr
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull DeviceTree updates from Rob Herring:
- remove most of_platform_populate() calls in arch code. Now the DT
core code calls it in the default case and platforms only need to
call it if they have special needs
- use pr_fmt on all the DT core print statements
- CoreSight binding doc improvements to block name descriptions
- add dt_to_config script which can parse dts files and list
corresponding kernel config options
- fix memory leak hit with a PowerMac DT
- correct a bunch of STMicro compatible strings to use the correct
vendor prefix
- fix DA9052 PMIC binding doc to match what is actually used in dts
files
* tag 'devicetree-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits)
documentation: da9052: Update regulator bindings names to match DA9052/53 DTS expectations
xtensa: Partially Revert "xtensa: Remove unnecessary of_platform_populate with default match table"
xtensa: Fix build error due to missing include file
MIPS: ath79: Add missing include file
Fix spelling errors in Documentation/devicetree
ARM: dts: fix STMicroelectronics compatible strings
powerpc/dts: fix STMicroelectronics compatible strings
Documentation: dt: i2c: use correct STMicroelectronics vendor prefix
scripts/dtc: dt_to_config - kernel config options for a devicetree
of: fdt: mark unflattened tree as detached
of: overlay: add resolver error prints
coresight: document binding acronyms
Documentation/devicetree: document cavium-pip rx-delay/tx-delay properties
of: use pr_fmt prefix for all console printing
of/irq: Mark initialised interrupt controllers as populated
of: fix memory leak related to safe_name()
Revert "of/platform: export of_default_bus_match_table"
of: unittest: use of_platform_default_populate() to populate default bus
memory: omap-gpmc: use of_platform_default_populate() to populate default bus
bus: uniphier-system-bus: use of_platform_default_populate() to populate default bus
...
Pull smp hotplug updates from Thomas Gleixner:
"This is the next part of the hotplug rework.
- Convert all notifiers with a priority assigned
- Convert all CPU_STARTING/DYING notifiers
The final removal of the STARTING/DYING infrastructure will happen
when the merge window closes.
Another 700 hundred line of unpenetrable maze gone :)"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
timers/core: Correct callback order during CPU hot plug
leds/trigger/cpu: Move from CPU_STARTING to ONLINE level
powerpc/numa: Convert to hotplug state machine
arm/perf: Fix hotplug state machine conversion
irqchip/armada: Avoid unused function warnings
ARC/time: Convert to hotplug state machine
clocksource/atlas7: Convert to hotplug state machine
clocksource/armada-370-xp: Convert to hotplug state machine
clocksource/exynos_mct: Convert to hotplug state machine
clocksource/arm_global_timer: Convert to hotplug state machine
rcu: Convert rcutree to hotplug state machine
KVM/arm/arm64/vgic-new: Convert to hotplug state machine
smp/cfd: Convert core to hotplug state machine
x86/x2apic: Convert to CPU hotplug state machine
profile: Convert to hotplug state machine
timers/core: Convert to hotplug state machine
hrtimer: Convert to hotplug state machine
x86/tboot: Convert to hotplug state machine
arm64/armv8 deprecated: Convert to hotplug state machine
hwtracing/coresight-etm4x: Convert to hotplug state machine
...
This partially reverts commit 69d99e6c0d keeping only the main
purpose of the original commit which is the removal of
of_platform_populate() call. The moving of of_clk_init() caused changes
in the initialization order breaking booting.
Fixes: 69d99e6c0d ("xtensa: Remove unnecessary of_platform_populate with default match table")
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 69d99e6c0d ("xtensa: Remove unnecessary of_platform_populate
with default match table") dropped various include files from
arch/xtensa/kernel/setup.c. This results in the following build error.
arch/xtensa/kernel/setup.c: In function ‘xtensa_dt_io_area’:
arch/xtensa/kernel/setup.c:213:2: error:
implicit declaration of function ‘of_read_ulong’
Fixes: 69d99e6c0d ("xtensa: Remove unnecessary of_platform_populate with default match table")
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull locking updates from Ingo Molnar:
"The locking tree was busier in this cycle than the usual pattern - a
couple of major projects happened to coincide.
The main changes are:
- implement the atomic_fetch_{add,sub,and,or,xor}() API natively
across all SMP architectures (Peter Zijlstra)
- add atomic_fetch_{inc/dec}() as well, using the generic primitives
(Davidlohr Bueso)
- optimize various aspects of rwsems (Jason Low, Davidlohr Bueso,
Waiman Long)
- optimize smp_cond_load_acquire() on arm64 and implement LSE based
atomic{,64}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
on arm64 (Will Deacon)
- introduce smp_acquire__after_ctrl_dep() and fix various barrier
mis-uses and bugs (Peter Zijlstra)
- after discovering ancient spin_unlock_wait() barrier bugs in its
implementation and usage, strengthen its semantics and update/fix
usage sites (Peter Zijlstra)
- optimize mutex_trylock() fastpath (Peter Zijlstra)
- ... misc fixes and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
locking/atomic: Introduce inc/dec variants for the atomic_fetch_$op() API
locking/barriers, arch/arm64: Implement LDXR+WFE based smp_cond_load_acquire()
locking/static_keys: Fix non static symbol Sparse warning
locking/qspinlock: Use __this_cpu_dec() instead of full-blown this_cpu_dec()
locking/atomic, arch/tile: Fix tilepro build
locking/atomic, arch/m68k: Remove comment
locking/atomic, arch/arc: Fix build
locking/Documentation: Clarify limited control-dependency scope
locking/atomic, arch/rwsem: Employ atomic_long_fetch_add()
locking/atomic, arch/qrwlock: Employ atomic_fetch_add_acquire()
locking/atomic, arch/mips: Convert to _relaxed atomics
locking/atomic, arch/alpha: Convert to _relaxed atomics
locking/atomic: Remove the deprecated atomic_{set,clear}_mask() functions
locking/atomic: Remove linux/atomic.h:atomic_fetch_or()
locking/atomic: Implement atomic{,64,_long}_fetch_{add,sub,and,andnot,or,xor}{,_relaxed,_acquire,_release}()
locking/atomic: Fix atomic64_relaxed() bits
locking/atomic, arch/xtensa: Implement atomic_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/x86: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/tile: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
locking/atomic, arch/sparc: Implement atomic{,64}_fetch_{add,sub,and,or,xor}()
...
This allows reserving regions of physical memory from the device tree.
See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Memblock is the standard kernel boot-time memory tracker/allocator. Use
it instead of the custom sysmem allocator. This allows using kmemleak,
CMA and device tree memory reservation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Now that the kernel load address and KSEG physical base address have
their own Kconfig symbols PLATFORM_DEFAULT_MEM seems redundant. It makes
little sense to use it in MMU configurations instead of KSEG_PADDR.
In noMMU configurations there's no explicit KSEG, so it's still useful
for the early cache initialization and definition of ARCH_PFN_OFFSET,
which affects mem_map size.
- limit it to noMMU; MMU variants have XCHAL_KSEG_PADDR and
XCHAL_KSEG_SIZE;
- don't use it to define TASK_SIZE or MAX_LOW_PFN: first doesn't make
any difference in noMMU, second is meaningless as there's no high
memory;
- don't add default physical memory region: memory layout should come
from the DT, bootloader tags, or memmap= command line parameter.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make kernel load address explicit, independent of the selected MMU
configuration and configurable from Kconfig. Do not restrict it to the
first 512MB of the physical address space.
Cleanup kernel memory layout macros:
- rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR;
- drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS;
- introduce PHYS_OFFSET and use it in __va and __pa definitions;
- synchronize MMU/noMMU vectors, drop unused NMI vector;
- replace hardcoded vectors offset of 0x3000 with Kconfig symbol.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
MMUv3 is able to support low memory bigger than 128MB.
Implement 256MB and 512MB KSEG layouts:
- add Kconfig selector for KSEG layout;
- add KSEG base address, size and alignment definitions to
arch/xtensa/include/asm/kmem_layout.h;
- use new definitions in TLB initialization;
- add build time memory map consistency checks.
See Documentation/xtensa/mmu.txt for the details of new memory layouts.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Create a header dedicated to memory layout definitions. Include it from
places where these definitions are needed.
Express vmalloc area address, VIRTUAL_MEMORY_ADDRESS and KERNELOFFSET
through KSEG address.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Make __ffs result type unsigned long to match generic asm
implementation. This fixes the following build warning:
mm/nobootmem.c: In function '__free_pages_memory':
include/linux/kernel.h:742:17: warning: comparison of distinct pointer
types lacks a cast
(void) (&_min1 == &_min2); \
^
mm/nobootmem.c💯11: note: in expansion of macro 'min'
order = min(MAX_ORDER - 1UL, __ffs(start));
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-xtensa@linux-xtensa.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160713153334.852575891@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Provide macro definitions regardless of whether caches are lockable or
not, make definitions empty in latter case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
STD_COM_FLAGS is mostly a bad name for what the drivers thinks it is.
Stop using it and pass the flags directly.
cyclades defines it as 0, so we do not assign anything to freshly
tty_port_init'ed structure.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is the third version of the patchset previously sent [1]. I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree. I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2. I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.
Motivation:
While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree. It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often. It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.
I think it makes some sense to get rid of them because they are just
making the semantic more unclear. Please note that GFP_REPEAT is
documented as
* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt
* _might_ fail. This depends upon the particular VM implementation.
while !costly requests have basically nofail semantic. So one could
reasonably expect that order-0 request with __GFP_REPEAT will not loop
for ever. This is not implemented right now though.
I would like to move on with __GFP_REPEAT and define a better semantic
for it.
$ git grep __GFP_REPEAT origin/master | wc -l
111
$ git grep __GFP_REPEAT | wc -l
36
So we are down to the third after this patch series. The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests. This still needs some double checking which I will do later
after all the simple ones are sorted out.
I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them. Patches should be quite trivial to
review for stupid compile mistakes though. The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.
[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org
This patch (of 19):
__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations. Yet we
have the full kernel tree with its usage for apparently order-0
allocations. This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).
Let's simply drop __GFP_REPEAT from those places. This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.
Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After patch "of/platform: Add common method to populate default bus",
it is possible for arch code to remove unnecessary callers of
of_platform_populate with default match table.
Move of_clk_init() into time_init(), then drop xtensa_device_probe() fully.
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Since all architectures have this implemented now natively, remove this
dead code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Implement FETCH-OP atomic primitives, these are very similar to the
existing OP-RETURN primitives we already have, except they return the
value of the atomic variable _before_ modification.
This is especially useful for irreversible operations -- such as
bitops (because it becomes impossible to reconstruct the state prior
to modification).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch updates/fixes all spin_unlock_wait() implementations.
The update is in semantics; where it previously was only a control
dependency, we now upgrade to a full load-acquire to match the
store-release from the spin_unlock() we waited on. This ensures that
when spin_unlock_wait() returns, we're guaranteed to observe the full
critical section we waited on.
This fixes a number of spin_unlock_wait() users that (not
unreasonably) rely on this.
I also fixed a number of ticket lock versions to only wait on the
current lock holder, instead of for a full unlock, as this is
sufficient.
Furthermore; again for ticket locks; I added an smp_rmb() in between
the initial ticket load and the spin loop testing the current value
because I could not convince myself the address dependency is
sufficient, esp. if the loads are of different sizes.
I'm more than happy to remove this smp_rmb() again if people are
certain the address dependency does indeed work as expected.
Note: PPC32 will be fixed independently
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: chris@zankel.net
Cc: cmetcalf@mellanox.com
Cc: davem@davemloft.net
Cc: dhowells@redhat.com
Cc: james.hogan@imgtec.com
Cc: jejb@parisc-linux.org
Cc: linux@armlinux.org.uk
Cc: mpe@ellerman.id.au
Cc: ralf@linux-mips.org
Cc: realmz6@gmail.com
Cc: rkuo@codeaurora.org
Cc: rth@twiddle.net
Cc: schwidefsky@de.ibm.com
Cc: tony.luck@intel.com
Cc: vgupta@synopsys.com
Cc: ysato@users.sourceforge.jp
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull perf updates from Ingo Molnar:
"Mostly tooling and PMU driver fixes, but also a number of late updates
such as the reworking of the call-chain size limiting logic to make
call-graph recording more robust, plus tooling side changes for the
new 'backwards ring-buffer' extension to the perf ring-buffer"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
perf record: Read from backward ring buffer
perf record: Rename variable to make code clear
perf record: Prevent reading invalid data in record__mmap_read
perf evlist: Add API to pause/resume
perf trace: Use the ptr->name beautifier as default for "filename" args
perf trace: Use the fd->name beautifier as default for "fd" args
perf report: Add srcline_from/to branch sort keys
perf evsel: Record fd into perf_mmap
perf evsel: Add overwrite attribute and check write_backward
perf tools: Set buildid dir under symfs when --symfs is provided
perf trace: Only auto set call-graph to "dwarf" when syscalls are being traced
perf annotate: Sort list of recognised instructions
perf annotate: Fix identification of ARM blt and bls instructions
perf tools: Fix usage of max_stack sysctl
perf callchain: Stop validating callchains by the max_stack sysctl
perf trace: Fix exit_group() formatting
perf top: Use machine->kptr_restrict_warned
perf trace: Warn when trying to resolve kernel addresses with kptr_restrict=1
perf machine: Do not bail out if not managing to read ref reloc symbol
perf/x86/intel/p4: Trival indentation fix, remove space
...
This option was replaced by PAGE_COUNTER which is selected by MEMCG.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to call exit_thread from copy_process in a fail path. So make it
accept task_struct as a parameter.
[v2]
* s390: exit_thread_runtime_instr doesn't make sense to be called for
non-current tasks.
* arm: fix the comment in vfp_thread_copy
* change 'me' to 'tsk' for task_struct
* now we can change only archs that actually have exit_thread
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
