Move logic of hist_entry__sort_on_period to __hpp__sort() in order to
support event group report.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-5-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Those function pointers will be used to sort report output based on
the selected fields. This is a preparation of later change.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1400480762-22852-2-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding libdw DWARF post unwind support, which is part
of elfutils-devel/libdw-dev package from version 0.158.
The new code is contained in unwin-libdw.c object, and
implements unwind__get_entries unwind interface function.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-4-git-send-email-jean.pihet@linaro.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding dwarf unwind test, that setups live machine data over
the perf test thread and does the remote unwind.
Need to use -fno-optimize-sibling-calls for test compilation,
otherwise 'krava_*' function calls are optimized into jumps
and omitted from the stack unwind.
So far it was enabled only for x86.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-3-git-send-email-jean.pihet@linaro.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Introducing perf_regs_load function, which is going
to be used for dwarf unwind test in following patches.
It takes single argument as a pointer to the regs dump
buffer and populates it with current registers values.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1400229672-16104-2-git-send-email-jean.pihet@linaro.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
cppcheck detected following warning:
[tools/perf/util/session.c:1628] -> [tools/perf/util/session.c:1632]:
(warning) Possible null pointer dereference: session - otherwise it
is redundant to check it against null.
In order to avoide null pointer, check the pointer before use.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Link: http://lkml.kernel.org/r/1400087618-13628-1-git-send-email-standby24x7@gmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
As we do not use .success in sched_wakeup event any more, then
we can not guarantee that the task when wakeup event happen is
out of run queue. So the message of nr_state_machine_bugs is
not correct.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/1399945101-21736-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
trace_sched_wakeup(.success) is a dead argument and has been for ages,
the only reason its still there is because of brain dead software, which
apparently includes perf tools
There's a few more instances in pearly snake shit, but that's not
supported as far as I care anyhow, so let that bitrot.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20140512181946.GG13467@laptop.programming.kicks-ass.net
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
. Propagate exit status of a command line workload for
record command (Namhyung Kim)
. Use tid for finding thread (Namhyung Kim)
. Clarify the output of perf sched map plus small sched
command fixies (Dongsheng Yang)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=felX
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core
Pull perf/core improvements and fixes from Jiri Olsa:
* Propagate exit status of a command line workload for
record command (Namhyung Kim)
* Use tid for finding thread (Namhyung Kim)
* Clarify the output of perf sched map plus small sched
command fixies (Dongsheng Yang)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I believe that passing pid (instead of tid) as the 3rd arg of the
machine__find*_thread() was to find a main thread so that it can
search proper map group for symbols. However with the map sharing
patch applied, it now can do it in any thread.
It fixes a bug when each thread has different name, it only reports a
main thread for samples in other threads.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Acked-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1399856202-26221-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The on_exit() function was only used in perf record but it's gone in
previous patch.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Bernhard Rosenkraenzer <Bernhard.Rosenkranzer@linaro.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Link: http://lkml.kernel.org/r/1399855645-25815-2-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Currently perf record doesn't propagate the exit status of a workload
given by the command line. But sometimes it'd useful if it's
propagated so that a monitoring script can handle errors
appropriately.
To do that, it moves most of logic out of the exit handlers and run
them directly in the __cmd_record(). The only thing needs to be done
in the handler is propagating terminating signal so that the shell can
terminate its loop properly when Ctrl-C was pressed. Also it cleaned
up the resource management code in record__exit().
With this change, perf record returns the child exit status in case of
normal termination and send signal to itself when terminated by signal.
Example run of Stephane's case:
$ perf record true && echo yes || echo no
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ]
yes
$ perf record false && echo yes || echo no
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.013 MB perf.data (~589 samples) ]
no
Jiri's case (error in parent):
$ perf record -m 10G true && echo yes || echo no
rounding mmap pages size to 17179869184 bytes (4194304 pages)
failed to mmap with 12 (Cannot allocate memory)
no
$ ulimit -n 6
$ perf record sleep 1 && echo yes || echo no
failed to create 'go' pipe: Too many open files
Couldn't run the workload!
no
And Peter's case (interrupted by signal):
$ while :; do perf record sleep 1; done
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.014 MB perf.data (~593 samples) ]
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1399855645-25815-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
In output of perf sched map, any shortname of thread will be explained
at the first time when it appear.
Example:
*A0 228836.978985 secs A0 => perf:23032
*. A0 228836.979016 secs B0 => swapper:0
. *C0 228836.979099 secs C0 => migration/3:22
*A0 . C0 228836.979115 secs
A0 . *. 228836.979115 secs
But B0, which is explained as swapper:0 did not appear in the
left part of output. Instead, we use '.' as the shortname of
swapper:0. So the comment of "B0 => swapper:0" is not easy to
understand.
This patch clarify the output of perf sched map with not allocating
one letter-number shortname for swapper:0 and print ". => swapper:0"
as the explanation for swapper:0.
Example:
*A0 228836.978985 secs A0 => perf:23032
* . A0 228836.979016 secs . => swapper:0
. *B0 228836.979099 secs B0 => migration/3:22
*A0 . B0 228836.979115 secs
A0 . * . 228836.979115 secs
A0 *C0 . 228836.979225 secs C0 => ksoftirqd/2:18
A0 *D0 . 228836.979236 secs D0 => rcu_sched:7
Signed-off-by: Dongsheng <yangds.fnst@cn.fujitsu.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1399354741-19522-1-git-send-email-yangds.fnst@cn.fujitsu.com
[ small style fixes to make checkpatch happy ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
We should record and process sched:sched_wakeup_new event in
perf sched tool, but currently, there is the process function
for it, without recording it in record subcommand.
This patch add -e sched:sched_wakeup_new to perf sched record.
Signed-off-by: Dongsheng <yangds.fnst@cn.fujitsu.com>
Link: http://lkml.kernel.org/r/710c6edd2162b2cea1711443f54de47c0210d9fd.1399273302.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Pull networking fixes from David Miller:
1) e1000e computes header length incorrectly wrt vlans, fix from Vlad
Yasevich.
2) ns_capable() check in sock_diag netlink code, from Andrew
Lutomirski.
3) Fix invalid queue pairs handling in virtio_net, from Amos Kong.
4) Checksum offloading busted in sxgbe driver due to incorrect
descriptor layout, fix from Byungho An.
5) Fix build failure with SMC_DEBUG set to 2 or larger, from Zi Shen
Lim.
6) Fix uninitialized A and X registers in BPF interpreter, from Alexei
Starovoitov.
7) Fix arch dependencies of candence driver.
8) Fix netlink capabilities checking tree-wide, from Eric W Biederman.
9) Don't dump IFLA_VF_PORTS if netlink request didn't ask for it in
IFLA_EXT_MASK, from David Gibson.
10) IPV6 FIB dump restart doesn't handle table changes that happen
meanwhile, causing the code to loop forever or emit dups, fix from
Kumar Sandararajan.
11) Memory leak on VF removal in bnx2x, from Yuval Mintz.
12) Bug fixes for new Altera TSE driver from Vince Bridgers.
13) Fix route lookup key in SCTP, from Xugeng Zhang.
14) Use BH blocking spinlocks in SLIP, as per a similar fix to CAN/SLCAN
driver. From Oliver Hartkopp.
15) TCP doesn't bump retransmit counters in some code paths, fix from
Eric Dumazet.
16) Clamp delayed_ack in tcp_cubic to prevent theoretical divides by
zero. Fix from Liu Yu.
17) Fix locking imbalance in error paths of HHF packet scheduler, from
John Fastabend.
18) Properly reference the transport module when vsock_core_init() runs,
from Andy King.
19) Fix buffer overflow in cdc_ncm driver, from Bjørn Mork.
20) IP_ECN_decapsulate() doesn't see a correct SKB network header in
ip_tunnel_rcv(), fix from Ying Cai.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
net: macb: Fix race between HW and driver
net: macb: Remove 'unlikely' optimization
net: macb: Re-enable RX interrupt only when RX is done
net: macb: Clear interrupt flags
net: macb: Pass same size to DMA_UNMAP as used for DMA_MAP
ip_tunnel: Set network header properly for IP_ECN_decapsulate()
e1000e: Restrict MDIO Slow Mode workaround to relevant parts
e1000e: Fix issue with link flap on 82579
e1000e: Expand workaround for 10Mb HD throughput bug
e1000e: Workaround for dropped packets in Gig/100 speeds on 82579
net/mlx4_core: Don't issue PCIe speed/width checks for VFs
net/mlx4_core: Load the Eth driver first
net/mlx4_core: Fix slave id computation for single port VF
net/mlx4_core: Adjust port number in qp_attach wrapper when detaching
net: cdc_ncm: fix buffer overflow
Altera TSE: ALTERA_TSE should depend on HAS_DMA
vsock: Make transport the proto owner
net: sched: lock imbalance in hhf qdisc
net: mvmdio: Check for a valid interrupt instead of an error
net phy: Check for aneg completion before setting state to PHY_RUNNING
...
Into perf-sys.h header, as requested by Peter:
http://lkml.kernel.org/r/20140502115201.GI30445@twins.programming.kicks-ass.net
Adding HAVE_ATTR_TEST define to turn off/on the attribute
test code in the sys_perf_event_open function.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-10-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into new perf-sys.h header.
The main reason is to separate system specific perf data
from perf tool stuff, so it could be used in small test
programs, as requested Peter:
http://lkml.kernel.org/r/20140502115201.GI30445@twins.programming.kicks-ass.net
This separation makes the perf.h header more clear.
Requested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-9-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into util/callchain.h header where all callchain related
structures should be.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-8-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Into util/event.h header where all sample data structures
are defined.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-7-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
It's defined in include/uapi/linux/prctl.h header.
Also it was never used in perf tool.
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1399293219-8732-6-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Combine all definitions into a common tools/include/linux/types.h and
kill the wild growth elsewhere. Move DECLARE_BITMAP to its proper
bitmap.h header.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/n/tip-azczs7qcv6h9xek9od10hiv2@git.kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
So tools/ has been growing three, at a different stage of their
development export.h headers and so we should unite into one. Add
tools/include/ to the include path of virtio and liblockdep to pick the
shared header now.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sasha Levin <sasha.levin@oracle.com>
Cc: virtio-dev@lists.oasis-open.org
Cc: virtualization@lists.linux-foundation.org
Link: http://lkml.kernel.org/r/1397493185-19521-2-git-send-email-bp@alien8.de
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus an Intel RAPL PMU driver fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tests x86: Fix stack map lookup in dwarf unwind test
perf x86: Fix perf to use non-executable stack, again
perf tools: Remove extra '/' character in events file path
perf machine: Search for modules in %s/lib/modules/%s
perf tests: Add static build make test
perf tools: Fix bfd dependency libraries detection
perf tools: Use LDFLAGS instead of ALL_LDFLAGS
perf/x86: Fix RAPL rdmsrl_safe() usage
tools lib traceevent: Fix memory leak in pretty_print()
tools lib traceevent: Fix backward compatibility macros for pevent filter enums
perf tools: Disable libdw unwind for all but x86 arch
perf tests x86: Fix memory leak in sample_ustack()
. Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
. Move u64_swap union to its single user's header, evsel.h (Borislav Petkov)
. Fix for s390 to properly parse tracepoints plus test code (Alexander Yarygin)
. Handle EINTR error for readn/writen (Namhyung Kim)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=z16U
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/core
Pull perf/core improvements and fixes from Jiri Olsa:
* Wire up perf_regs and unwind support for ARM64 (Jean Pihet)
* Move u64_swap union to its single user's header, evsel.h (Borislav Petkov)
* Fix for s390 to properly parse tracepoints plus test code (Alexander Yarygin)
* Handle EINTR error for readn/writen (Namhyung Kim)
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The AND instruction is erroneously using the X register instead
of the K register.
Signed-off-by: Brendan Hickey <bhickey@google.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
arch/x86/tests/regs_load.S is missing the linker note about the stack
requirements, therefore making the linker fall back to an executable
stack. As this object gets linked against the final perf binary, it'll
needlessly end up with an executable stack. Fix this by adding the
appropriate linker note.
Also add a global linker flag to prevent future regressions, as
suggested by Jiri. This way perf won't get an executable stack even if
we fail to add the .GNU-stack linker note to future assembler files.
Though, doing so might create regressions the other way around, when
(statically) linking against libraries needing an executable stack.
But, apparently, regressing in that direction is wanted as it is an
indicator of poor code quality -- or just missing linker notes.
Fixes: 3c8b06f981 ("perf tests x86: Introduce perf_regs_load function")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398617466-22749-1-git-send-email-minipli@googlemail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
The array debugfs_known_mountpoints[] will cause extra '/'
character output.
Remove it.
pre:
$ perf probe -l
/sys/kernel/debug//tracing/uprobe_events file does not exist -
please rebuild kernel with CONFIG_UPROBE_EVENTS.
post:
$ perf probe -l
/sys/kernel/debug/tracing/uprobe_events file does not exist -
please rebuild kernel with CONFIG_UPROBE_EVENTS.
Signed-off-by: Xia Kaixu <xiakaixu@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/535B6660.2060001@huawei.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Modules installed outside of the kernel's build system should go into
"%s/lib/modules/%s/extra", but at present, perf will only look at them
when they are in "%s/lib/modules/%s/kernel". Lets encourage good
citizenship by relaxing this requirement to "%s/lib/modules/%s". This
way open source modules that are out-of-tree have no incentive to start
populating a directory reserved for in-kernel modules and I can stop
hex-editing my system's perf binary when profiling OSS out-of-tree
modules.
Feedback from Namhyung Kim correctly revealed that the hex-edits that I
had been doing meant that perf was also traversing the build and source
symlinks in %s/lib/modules/%s. That is undesireable, so we explicitly
exclude them from traversal with a minor tweak to the traversal routine.
Signed-off-by: Richard Yao <ryao@gentoo.org>
Acked-by: Namhyung kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398532675-13684-1-git-send-email-ryao@gentoo.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Adding test for building static perf build into the automated
suite. Also available via following commands:
$ make -f tests/make make_static
- make_static: cd . && make -f Makefile DESTDIR=/tmp/tmp.7u5MlB4njo LDFLAGS=-static
$ make -f tests/make make_static_O
- make_static_O: cd . && make -f Makefile O=/tmp/tmp.Ay6r3wEmtX DESTDIR=/tmp/tmp.vK0KQwO0Vi LDFLAGS=-static
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398760413-7574-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
There's false assumption in the library detection code
assuming -liberty and -lz are always present once bfd
is detected. The fails on Ubuntu (14.04) as reported
by Ingo.
Forcing the bdf dependency libraries detection any
time bfd library is detected.
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398676935-6615-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
We no longer use ALL_LDFLAGS, Replacing with LDFLAGS.
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1398675770-3109-1-git-send-email-jolsa@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
This patch hooks in the perf_regs and libunwind code for ARM64.
The tools/perf/arch/arm64 is created; it contains the arch specific
code for DWARF unwinding.
Signed-off-by: Jean Pihet <jean.pihet@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1398688353-3737-1-git-send-email-jean.pihet@linaro.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
In tests/parse-events.c test cases are declared in evlist_test[]
arrays. Elements of arrays are initialized in following pattern:
[i] = {
.name = ...,
.check = ...,
},
When perf-test is running with '-v' option, 'i' variable will be
printed for every existing test.
However, we can't add any arch specific tests inside #ifdefs, because it
will create collision between the element number inside #ifdef and the
next one outside.
This patch adds 'id' field in evlist_test, uses it as a test
identifier and removes explicit numbering of array elements. This helps
to number tests with gaps.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1398440047-6641-3-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Trace events potentially can have a '-' in their trace system name,
e.g. kvm on s390 defines kvm-s390:* tracepoints.
We could not parse them, because there was no rule for this:
$ sudo ./perf top -e "kvm-s390:*"
invalid or unsupported event: 'kvm-s390:*'
This patch adds an extra rule to event_legacy_tracepoint which handles
those cases. Without the patch, perf will not accept such tracepoints in
the -e option.
Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: http://lkml.kernel.org/r/1398440047-6641-2-git-send-email-yarygin@linux.vnet.ibm.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Those readn/writen functions are to ensure read/write does I/O for
a given size exactly. But ion() - its implementation - does not
handle in case it returns prematurely due to a signal. As it's not
an error itself so just retry the operation.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1398346054-3322-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
