A couple bits are used by OPA for link physical state that are not present
as part of InfiniBand. Add a short blurb what those states mean and removed
an unused state.
Cc: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Todd Rimmer <todd.rimmer@intel.com>
Reviewed-by: Brent Rothermel <brent.r.rothermel@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check xchg returned value for queuing link down entry
to guarantee proper atomic value reads.
Fixes: 626c077c02 ("IB/hfi1: Prevent link down request double queuing")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in pr_warn_ratelimited warning message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enabling this bit helps core components query for extended address
support using the rdma_cap_opa_ah interface.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
PIO/SDMA send logic now uses the hdr_type field to determine
the type of packet that has been constructed. Based on the hdr_type,
certain things such as PBC flags, padding count and the LT extra
trailing bytes are determined.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Increase lid used in hfi1 driver to 32 bits. qib continues
to use 16 bit lids.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add 16B bypass packet support for UD traffic types.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When address handle attributes are initialized, the LIDs are
transformed to be in the 32 bit LID space.
When constructing the header, hfi1 driver will look at the LID
to determine the packet header to be created.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enhance hdr_rcverr() to also handle errors during
16B bypass packet receive.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We introduce struct hfi1_opa_header as a union
of ib (9B) and 16B headers.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We introduce a struct hfi1_16b_header to support 16B headers.
16B bypass packets are received by the driver and processed
similar to 9B packets. Add basic support to handle 16B packets.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rvt_check_ah() delegates lid verification to underlying
driver. Underlying driver uses different conditions to
check for dlid depending on whether the device supports
extended LIDs
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a mixture of mutex and spinlocks to protect receive context
(rcd/uctxt) information. This is not used consistently.
Use the mutex to protect device receive context information only.
Use the spinlock to protect sub context information only.
Protect access to items in the rcd array with a spinlock and
reference count.
Remove spinlock around dd->rcd array cleanup. Since interrupts are
disabled and cleaned up before this point, this lock is not useful.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The rcd array can be accessed from user context or during interrupts.
Protecting this with a mutex isn't a good idea because the mutex should
not be used from an IRQ.
Protect the allocation and freeing of rcd array elements with a
spinlock.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When DC is shut down (by e.g. disconnecting the cable), the
driver should use host_link_state to get port's current
physical state. This is due to the fact that physical state
is read from DC's CSRs and when DC is shut down and state is
changed, its registers are not impacted.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Do not track logical state separately from host_link_state. Deduce
logical state from host_link_state when required. Transitions in
set_link_state and goto_offline already make sure host_link_state
reflects hardware's logical state properly.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The pmtu field doens't have be stored in the QP structure
as it can easily be calculated when needed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current code has some serious flaws. Disarm the flag
pending an appropriate patch.
Fixes: 53526500f3 ("IB/hfi1: Permanently enable P_Key checking in HFI")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Most user verbs pass user data to the kernel with the inclusion of the
ib_uverbs_cmd_hdr structure. This is problematic because the vendor has
no ideas if the verb was called by a legacy verb or an extended verb.
Also, the incosistency between the verbs is confusing.
Fixes: 565197dd8f ("IB/core: Extend ib_uverbs_create_cq")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The PCI pool API is deprecated. This commit replaces the PCI pool old
API by the appropriate function with the DMA pool API.
Signed-off-by: Romain Perier <romain.perier@collabora.com>
Acked-by: Peter Senna Tschudin <peter.senna@collabora.com>
Tested-by: Peter Senna Tschudin <peter.senna@collabora.com>
Acked-by: Doug Ledford <dledford@redhat.com>
Tested-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Initializing cq_context with ev_queue in create_cq(), leads to NULL pointer
dereference in ib_uverbs_comp_handler(), if application doesnot use completion
channel. This patch fixes the cq_context initialization.
Fixes: 1e7710f3f6 ("IB/core: Change completion channel to use the reworked")
Cc: stable@vger.kernel.org # 4.12
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
(cherry picked from commit 699a2d5b1b)
Enables multiple Interrupt vectors. Driver is requesting the max
MSIX vectors based on the number of online cpus and creates upto
9 MSIx vectors (1 for control path and 8 for data path).
A tasklet is created for each of these vectors. NQs are assigned
to CQs in round robin fashion.
This patch also adds IRQ affinity hint for the MSIX vector of each NQ.
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch series primarily increases sizes of variables that hold
lid values from 16 to 32 bits. Additionally, it adds a check in
the IB mad stack to verify a properly formatted MAD when OPA
extended LIDs are used.
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging our (hopefully) final -rc pull branch into our for-next branch
because some of our pending patches won't apply cleanly without having
the -rc patches in our tree.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/infiniband/core/iwcm.c - The rdma_netlink patches in
HEAD and the iwarp cm workqueue fix (don't use WQ_MEM_RECLAIM,
we aren't safe for that context) touched the same code.
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.
Done using Coccinelle.
@m disable optional_qualifier@
identifier s;
position p;
@@
static struct bin_attribute s@p={...};
@okay1@
position p;
identifier m.s;
@@
(
sysfs_create_bin_file(...,&s@p,...)
|
sysfs_remove_bin_file(...,&s@p,...)
)
@bad@
position p!={m.p,okay1.p};
identifier m.s;
@@
s@p
@change depends on !bad disable optional_qualifier@
identifier m.s;
@@
static
+const
struct bin_attribute s={...};
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.
Done using Coccinelle.
@m disable optional_qualifier@
identifier s;
position p;
@@
static struct bin_attribute s@p={...};
@okay1@
position p;
identifier m.s;
@@
(
sysfs_create_bin_file(...,&s@p,...)
|
sysfs_remove_bin_file(...,&s@p,...)
)
@bad@
position p!={m.p,okay1.p};
identifier m.s;
@@
s@p
@change depends on !bad disable optional_qualifier@
identifier m.s;
@@
static
+const
struct bin_attribute s={...};
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Initializing cq_context with ev_queue in create_cq(), leads to NULL pointer
dereference in ib_uverbs_comp_handler(), if application doesnot use completion
channel. This patch fixes the cq_context initialization.
Fixes: 1e7710f3f6 ("IB/core: Change completion channel to use the reworked")
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in i40iw_debug message and
also split up a couple of lines that are too long and cause
checkpatch warnings
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Port validation is performed in ib_core, no need to duplicate it here.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This message is warning so let's print it accordingly.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove NULL check for cm_node->listener in i40iw_accept
as listener is always present at this point.
Remove the check for cm_node->accept_pend and related code
in i40iw_cm_event_connected as the cm_node in this context
is only pertinent to active node and cm_node->accept_pend
is always 0.
This fixes the following smatch warnings,
drivers/infiniband/hw/i40iw/i40iw_cm.c:3691 i40iw_accept()
error: we previously assumed 'cm_node->listener' could be null
drivers/infiniband/hw/i40iw/i40iw_cm.c:4061 i40iw_cm_event_connected()
error: we previously assumed 'cm_node->listener' could be null
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
10774 1872 8 12654 316e infiniband/hw/vmw_pvrdma/pvrdma_main.o
File size After adding 'const':
text data bss dec hex filename
10838 1808 8 12654 316e infiniband/hw/vmw_pvrdma/pvrdma_main.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
10429 780 33 11242 2bea drivers/infiniband/hw/nes/nes.o
File size After adding 'const':
text data bss dec hex filename
10541 668 33 11242 2bea drivers/infiniband/hw/nes/nes.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
13067 805 4 13876 3634 infiniband/hw/mthca/mthca_main.o
File size After adding 'const':
text data bss dec hex filename
13419 453 4 13876 3634 infiniband/hw/mthca/mthca_main.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some drivers (specifically the nes IB driver), want to create a lot of
sysfs driver attributes. Instead of open-coding the creation and
removal of these files (and getting it wrong btw), it's a better idea to
let the driver core handle all of this logic for us.
So add a new field to the pci driver structure, **groups, that allows
pci drivers to specify an attribute group list it wishes to have created
when it is registered with the driver core.
Big bonus is now the driver doesn't race with userspace when the sysfs
files are created vs. when the kobject is announced, so any script/tool
that actually wanted to use these files will not have to poll waiting
for them to show up.
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake, rename variable 'continious'
to the correct spelling 'continuous'
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in qib_dev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Its very likely that iwcm work execution will yield memory
allocations (for example cm connection request).
Reported-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
create_workqueue always creates the workqueue with WQ_MEM_RECLAIM
and silences a flush dependency warn for WQ_LEGACY. Instead, we
want to keep the warn in case the allocator tries to flush the
cm workqueue because its very likely that cm work execution will
yield memory allocations (for example cm connection requests).
Reported-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
ib_clients can indeed fill .add to NULL, but then they will not see
any device removal notifications. The reason is that that
ib_register_client and ib_register_device checked existence of .add
before adding the creating a corresponding client_data and adding
it to the list. Simple condition reverse fixes the issue.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This 'BUG_ON(!ep)' can never trigger because we have:
if (!ep)
return 0;
just a few lines above. So it can be removed safely.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
As part of ib_uverbs_remove_one which might be triggered upon
reset flow, we trigger IB_EVENT_DEVICE_FATAL event to userspace
application.
If device was removed after uverbs fd was opened but before
ib_uverbs_get_context was called, the event file will be accessed
before it was allocated, result in NULL pointer dereference:
[ 72.325873] BUG: unable to handle kernel NULL pointer dereference at (null)
...
[ 72.325984] IP: _raw_spin_lock_irqsave+0x22/0x40
[ 72.327123] Call Trace:
[ 72.327168] ib_uverbs_async_handler.isra.8+0x2e/0x160 [ib_uverbs]
[ 72.327216] ? synchronize_srcu_expedited+0x27/0x30
[ 72.327269] ib_uverbs_remove_one+0x120/0x2c0 [ib_uverbs]
[ 72.327330] ib_unregister_device+0xd0/0x180 [ib_core]
[ 72.327373] mlx5_ib_remove+0x74/0x140 [mlx5_ib]
[ 72.327422] mlx5_remove_device+0xfb/0x110 [mlx5_core]
[ 72.327466] mlx5_unregister_interface+0x3c/0xa0 [mlx5_core]
[ 72.327509] mlx5_ib_cleanup+0x10/0x962 [mlx5_ib]
[ 72.327546] SyS_delete_module+0x155/0x230
[ 72.328472] ? exit_to_usermode_loop+0x70/0xa6
[ 72.329370] do_syscall_64+0x54/0xc0
[ 72.330262] entry_SYSCALL64_slow_path+0x25/0x25
Fix it by checking that user context was allocated before
trigger the event.
Fixes: 036b106357 ('IB/uverbs: Enable device removal when there are active user space applications')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When dmac is NULL, ah is not being freed on the error return path. Fix
this by kfree'ing it.
Detected by CoverityScan, CID#1452636 ("Resource Leak")
Fixes: d8966fcd4c ("IB/core: Use rdma_ah_attr accessor functions")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid out of bounds error by utilizing I40IW_MAX_STATS_COUNT
instead of I40IW_INVALID_FCN_ID.
Signed-off-by: Christopher N Bednarz <christoper.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Utilize correct alignment variable when allocating
DMA memory for CQ0.
Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The typecast of tcp_seq_num incorrectly uses u8. Fix by
casting to u32.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix incorrect naming of status code and struct. Use inline
instead of immediate.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Parsing of commit/query Host Memory Cache Function Private Memory
is not skipping over reserved fields and incorrectly assigning
those values into object's base/cnt/max_cnt fields. Skip over
reserved fields and set correct values. Also correct memory
alignment requirement for commit/query FPM buffers.
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Christopher N Bednarz <christopher.n.bednarz@intel.com>
Signed-off-by: Henry Orosco <henry.orosco@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a chance of a race between arming the CQ and receiving
completions. By reporting CQ missed events any ULPs should poll
again to get the completions.
Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Acked-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hns driver uses __raw_writeq which is only defined in 64BIT
environments. Trying to compile the driver in a 32BIT environment
results in errors. Only COMPILE_TEST when 64BIT is defined.
Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
include/rdma/ib_verbs.h - Modified a function signature adjacent
to a newly added function signature from a previous merge
Signed-off-by: Doug Ledford <dledford@redhat.com>
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Both add new code
include/rdma/ib_verbs.h - Both add new code
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to the IB specification, the LID and SM_LID
are 16-bit wide, but to support OmniPath users, export
it as 32-bit value from the beginning.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add Node GUID and system image GUID to the device properties
exported by RDMA netlink, to be used by RDMAtool.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is a need to forward FW version to user space
application through RDMA netlink. In order to make it safe, there
is need to declare nla_policy and limit the size of FW string.
The new define IB_FW_VERSION_NAME_MAX will limit the size of
FW version string. That define was chosen to be equal to
ETHTOOL_FWVERS_LEN, because many drivers anyway are limited
by that value indirectly.
The introduction of this define allows us to remove the string size
from get_fw_str function signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The port capability mask is exposed to user space via sysfs interface,
while device capabilities are available for verbs only.
This patch provides those capabilities through netlink interface.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Provide ability to get specific to device and port information.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
This patch implements the query interface to get all
ports data for the specific device.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
This patch adds the ability to return all available devices
together with their properties.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Add nldev init and exit flows to the RDMA/core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Introduce new defines to rdma_netlink.h, so the RDMA configuration tool
will be able to communicate with RDMA subsystem by using the shared defines.
The addition of new client (NLDEV) revealed the fact that we exposed by
mistake the RDMA_NL_I40IW define which is not backed by any RDMA netlink
by now and it won't be exposed in the future too. So this patch reuses
the value and deletes the old defines.
The NLDEV operates with objects. The struct ib_device has two straightforward
objects: device itself and ports of that device.
This brings us to propose the following commands to work on those objects:
* RDMA_NLDEV_CMD_{GET,SET,NEW,DEL} - works on ib_device itself
* RDMA_NLDEV_CMD_PORT_{GET,SET,NEW,DEL} - works on ports of specific ib_device
Those commands receive/return the device index (RDMA_NLDEV_ATTR_DEV_INDEX)
and port index (RDMA_NLDEV_ATTR_PORT_INDEX). For device object accesses,
the RDMA_NLDEV_ATTR_PORT_INDEX will return the maximum number of ports
for specific ib_device and for port access the actual port index.
The port index starts from 1 to follow RDMA/core internal semantics and
the sysfs exposed knobs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
RDMA_NL_LS protocol is actually does not dump anything,
but sets data and it should be handled by doit callback.
This patch actually converts RDMA_NL_LS to doit callback, while
preserving IWCM and RDMA_CM flows through netlink_dump_start().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Introduce intermediate variable to store access to fields
of cb_table.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
The .doit callback is used by netlink core to differentiate
between get and set operations. Common convention is to use
that call for command operations like (SET, ADD, e.t.c.) and/or
access without NLF_M_DUMP flag.
This commit adds proper declaration and implementation
to RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
This patch adds static device index in similar fashion to
already available in netdev world (struct net->ifindex).
In downstream patches, the RDMA nelink will use this idx-to-ib_device
conversion, so as part of this commit, we are exposing the translation
function to be visible for IB/core users.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The coming nldev needs to iterate over all IB devices in the system
and in order to not expose the ib_devices list outside the devices.c,
it is necessary to provide function iterator.
Current version is written explicitly for nldev callback to avoid
over-engineering at this stage, but it can be easily extended for
other types.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
The RDMA netlink client infrastructure was removed and made obsolete.
The old infrastructure defined struct ibnl_client_cbs. Now that all
uses of this have been updated to the new infrastructure, rename the
struct to be compliant with the current stack naming standards:
struct rdma_nl_cbs.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Make ibnl_chk_listeners function to be one line by removing
unneeded comparison.
Rename that function to be complaint to other functions in RDMA netlink.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
The pointer to netlink header was not used in the ibnl_multicast
function, so let's remove it and simplify the function
signature.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Netlink message header is not needed for unicast reply, hence remove it.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Reuse standard macros to cancel the netlink message
in case of error.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Add ability to provide flags to control RDMA netlink callbacks
and convert addr.c and sa_query.c to be first users of such
infrastructure. It allows to move their CAP_NET_ADMIN checks
into netlink core.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
The iwcm exports functions which are not used outside of ib_core.
This patch simply removes these EXPORT_SYMBOLS.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
RDMA netlink implementation guarantees that supplied
client number is in allowed range.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
The standard netlink_rcv_skb function skips messages without
NLM_F_REQUEST flag in it, while SA netlink client issues them.
In commit bc10ed7d3d ("IB/core: Add rdma netlink helper functions")
the local function was introduced to allow such messages.
This led to double pass for every incoming message.
In this patch, we unify that local implementation and netlink_rcv_skb
functions, so there will be no need for double pass anymore.
As a outcome, this combined function gained more strict check
for NLM_F_REQUEST flag and it is now allowed for SA pathquery
client only.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Owner field is not needed to be set because netlink is part of ib_core
which will be unloaded last after all other modules are unloaded.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
RDMA netlink has a complicated infrastructure for dynamically
registering and de-registering netlink clients to the NETLINK_RDMA
group. The complicated portion of this code is not widely used because
2 of the 3 current clients are statically compiled together with
netlink.c. The infrastructure, therefore, is deemed overkill.
Refactor the code to eliminate the dynamically added clients. Now all
clients are pre-registered in a client array at compile time, and at run
time they merely check-in with the infrastructure to pass their callback
table for inclusion in the pre-sized client array.
This also allows for future cleanups and removal of unneeded code in the
iwcm* netlink handler.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Chien Tin Tung <chien.tin.tung@intel.com>
The UDP offload conflict is dealt with by simply taking what is
in net-next where we have removed all of the UFO handling code
entirely.
The TCP conflict was a case of local variables in a function
being removed from both net and net-next.
In netvsc we had an assignment right next to where a missing
set of u64 stats sync object inits were added.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a wait/retry version of ibnl_unicast, ibnl_unicast_wait,
and modify ibnl_unicast to not wait/retry. This eliminates
the undesirable wait for future users of ibnl_unicast.
Change Portmapper calls originating from kernel to user-space
to use ibnl_unicast_wait and take advantage of the wait/retry
logic in netlink_unicast.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Chien Tin Tung <chien.tin.tung@intel.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If extended LIDs are being used, a connection request contains
OPA GIDs in them. Extract the lids from the OPA gids and populate
slid/dlid fields in the path records that are created when handling
a connection request.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When handling an incoming conection request, ib_cm creates
either an IB or an OPA path record based on the gid field
in the request.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add OPA path record support to the Connection Manager.
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
slid field in struct ib_wc is increased to 32 bits.
This enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
sm_lid field in struct ib_port_attr is increased to 32 bits. This
enables core components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
lid field in struct ib_port_attr is increased to 32 bits. This enables core
components to use larger LIDs if needed.
The user ABI is unchanged and return 16 bit values when queried.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
MAD RMPP contains slid field which is 16 bits in
length, increase it to 32 bits.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IPoIB contains local_lid field which is 16 bits in
length, increase it to 32 bits.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
srpt contains lid and sm_lid fields which are 16 bits in
length, increase them to 32 bits.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPA address handle atttibutes that have 32 bit LIDs would have to
be converted to IB address handle attribute with the LID field
programmed in the GID before copying to user space.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The patchset provides various fixes for IPoIB. It is combination of
fixes to various issues discovered during verification along with
static checkers cleanup patches.
Most of the patches are from pre-git era and hence lack of Fixes lines.
There is one exception in this IPoIB group - addition of patch revert:
Revert "IB/core: Allow QP state transition from reset to error", but
it followed by proper fix to the annoying print, so I thought it is
appropriate to include it.
-----BEGIN PGP SIGNATURE-----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=UbC8
-----END PGP SIGNATURE-----
Merge tag 'rdma-rc-2017-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/leon/linux-rdma into leon-ipoib
IPoIB fixes for 4.13
The patchset provides various fixes for IPoIB. It is combination of
fixes to various issues discovered during verification along with
static checkers cleanup patches.
Most of the patches are from pre-git era and hence lack of Fixes lines.
There is one exception in this IPoIB group - addition of patch revert:
Revert "IB/core: Allow QP state transition from reset to error", but
it followed by proper fix to the annoying print, so I thought it is
appropriate to include it.
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hns_roce_v1_create_lp_qp() returns NULL on error, not error pointers.
Fixes: bfcc681bd0 ("IB/hns: Fix the bug when free mr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The extended address vector is the highest bit in be32 variable,
but it was compared with the lowest. This patch fixes the endianness
of that check and removes already declared define.
Fixes: 17d2f88f92 ("IB/mlx5: Add ODP atomics support")
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Uverbs device should be cleaned up only when there is no
potential usage of.
As part of ib_uverbs_remove_one which might be triggered upon reset flow
the device reference count is decreased as expected and leave the final
cleanup to the FDs that were opened.
Current code increases reference count upon opening a new command FD and
decreases it upon closing the file. The event FD is opened internally
and rely on the command FD by taking on it a reference count.
In case that the command FD was closed and just later the event FD we
may ensure that the device resources as of srcu are still alive as they
are still in use.
Fixing the above by moving the reference count decreasing to the place
where the command FD is really freed instead of doing that when it was
just closed.
fixes: 036b106357 ("IB/uverbs: Enable device removal when there are active user space applications")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
initialize to zero the response structure to prevent
the leakage of "resp.reserved" field.
drivers/infiniband/core/uverbs_cmd.c:1178 ib_uverbs_resize_cq() warn:
check that 'resp.reserved' doesn't leak information
Fixes: 33b9b3ee97 ("IB: Add userspace support for resizing CQs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently while resolving IP address to MAC address single delayed work
is used for resolving multiple such resolve requests. This singled work
is essentially performs two tasks.
(a) any retry needed to resolve and
(b) it executes the callback function for all completed requests
While work is executing callbacks, any new work scheduled on for this
workqueue is lost because workqueue has completed looking at all pending
requests and now looking at callbacks, but work is still under
execution. Any further retry to look at pending requests in
process_req() after executing callbacks would lead to similar race
condition (may be reduce the probably further but doesn't eliminate it).
Retrying to enqueue work that from queue_req() context is not something
rest of the kernel modules have followed.
Therefore fix in this patch utilizes kernel facility to enqueue multiple
work items to a workqueue. This ensures that no such requests
gets lost in synchronization. Request list is still maintained so that
rdma_cancel_addr() can unlink the request and get the completion with
error sooner. Neighbour update event handling continues to be handled in
same way as before.
Additionally process_req() work entry cancels any pending work for a
request that gets completed while processing those requests.
Originally ib_addr was ST workqueue, but it became MT work queue with
patch of [1]. This patch again makes it similar to ST so that
neighbour update events handler work item doesn't race with
other work items.
In one such below trace, (though on 4.5 based kernel) it can be seen
that process_req() never executed the callback, which is likely for an
event that was schedule by queue_req() when previous callback was
getting executed by workqueue.
[<ffffffff816b0dde>] schedule+0x3e/0x90
[<ffffffff816b3c45>] schedule_timeout+0x1b5/0x210
[<ffffffff81618c37>] ? ip_route_output_flow+0x27/0x70
[<ffffffffa027f9c9>] ? addr_resolve+0x149/0x1b0 [ib_addr]
[<ffffffff816b228f>] wait_for_completion+0x10f/0x170
[<ffffffff810b6140>] ? try_to_wake_up+0x210/0x210
[<ffffffffa027f220>] ? rdma_copy_addr+0xa0/0xa0 [ib_addr]
[<ffffffffa0280120>] rdma_addr_find_l2_eth_by_grh+0x1d0/0x278 [ib_addr]
[<ffffffff81321297>] ? sub_alloc+0x77/0x1c0
[<ffffffffa02943b7>] ib_init_ah_from_wc+0x3a7/0x5a0 [ib_core]
[<ffffffffa0457aba>] cm_req_handler+0xea/0x580 [ib_cm]
[<ffffffff81015982>] ? __switch_to+0x212/0x5e0
[<ffffffffa04582fd>] cm_work_handler+0x6d/0x150 [ib_cm]
[<ffffffff810a14c1>] process_one_work+0x151/0x4b0
[<ffffffff810a1940>] worker_thread+0x120/0x480
[<ffffffff816b074b>] ? __schedule+0x30b/0x890
[<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
[<ffffffff810a1820>] ? process_one_work+0x4b0/0x4b0
[<ffffffff810a6b1e>] kthread+0xce/0xf0
[<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
[<ffffffff816b53a2>] ret_from_fork+0x42/0x70
[<ffffffff810a6a50>] ? kthread_freezable_should_stop+0x70/0x70
INFO: task kworker/u144:1:156520 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
message.
kworker/u144:1 D ffff883ffe1d7600 0 156520 2 0x00000080
Workqueue: ib_addr process_req [ib_addr]
ffff883f446fbbd8 0000000000000046 ffff881f95280000 ffff881ff24de200
ffff883f66120000 ffff883f446f8008 ffff881f95280000 ffff883f6f9208c4
ffff883f6f9208c8 00000000ffffffff ffff883f446fbbf8 ffffffff816b0dde
[1] http://lkml.iu.edu/hypermail/linux/kernel/1608.1/05834.html
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Two minor conflicts in virtio_net driver (bug fix overlapping addition
of a helper) and MAINTAINERS (new driver edit overlapping revamp of
PHY entry).
Signed-off-by: David S. Miller <davem@davemloft.net>
Always initiate an offline transition request
when a link down occurs. The firmware will
use this request to confirm that the driver
has seen the link down message. A host version
is set to indicate this driver behavior to the
firmware.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When link interrupts occur, multiple link down requests
could be queued up when only one is needed. This could get
the hfi1 out of sync with its link partner during LNI.
Only allow one link down request to be queued at any one time.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, link down interrupts queue link entries
on a workqueue intended for sending events only.
Create a workqueue for queuing link events.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The error messages when checksum validation of the platform
configuration fields populated into the ASIC scratch registers fails are
ambiguous. Disambiguate them.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The allocate_ctxt() function adds the context to the fd data structure.
Since the context is not completely initialized, this can cause confusion
as to whether the context is valid or not.
Move the fd reference from allocate_ctxt() to setup_base_ctxt().
Update the necessary functions to be aware of this move.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix issue where a disabled port can be enabled by
inserting a cable. The port should be explicitly
enabled instead.
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a window that allows other threads to read state of
'host_link_state' as a new, before the hardware actual state is set.
This patch closes the window by indicating a new state only after
hardware transition is complete.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A copy_to_user() call assumes that two members of a data structure
are sequential. Since this may not always be true, separate the copies
to ensure a safe copy.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is a window where the FM can read the buffer control table
and decide not to program buffers. When a port goes down, the code
clears the table and if it is not programmed, posted SDMA descriptors
will never complete due to no buffer credits.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During PCIe initialization some registers' values from
PCI config space are saved in order to restore them later
(i.e. after reset). Restoring those value is done by a
function called restore_pci_variables, while saving them
is put directly into function hfi1_pcie_ddinit.
Move saving values to a separate function in the image
of restoring functionality.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Loading debug signed firmware fails if started immediately after
failed attempt to load production firmware. A short delay is
required so add about a 100us delay after RSA check failure.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Code structure is not consistent for if/else blocks and break
instructions in set_link_state for case HLS_UP_INIT. Physical
state uses break in case of an error and if/else blocks for
logical use cases. These blocks should be implemented consistently.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A trap should be sent to the FM until the FM sends a repress message.
This is in line with the IBTA 13.4.9.
Add the ability to resend traps until a repress message is received.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael N. Henry <michael.n.henry@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hfi1_rcvctrl() function receives an index which it then converts
to an rcd. Since most functions have the rcd, use that instead.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The hfi1_<set|clear>_ctxt_<j|p>key functions take a context index and
look up the context based on that index.
Since the context index is being retrieved from the context, this
doesn't seem optimal.
Pass the context pointer for use, rather than the context index.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The array index for the rcd array is sized several different ways
throughout the code.
Use the user interface size (u16) as the standard size and update the
necessary code to reflect this.
u16 is large enough for the largest amount of supported contexts.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Several data members of the user context have become unused over time.
Cleaning them up.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the error path for context allocation, the file descriptor pointer
should not point to a context when an error occurs.
Clean up the appropriate references on error.
Fixes: Commit 62239fc6e5 ("IB/hfi1: Clean up on context initialization failure")
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When an egress resource(SDMA descriptors, pio credits) is not available,
a sending thread will be put on the resource's wait queue. When the
resource becomes available again, up to a fixed number of sending threads
can be awakened sequentially and removed from the wait queue, depending
on the number of waiting threads and the number of free resources. Since
each awakened sending thread will send as many packets as possible, it
is highly likely that the first sending thread will consume all the
egress resources. Subsequently, it will be put back to the end of the wait
queue. Depending on the timing when the later sending threads wake up,
they may not be able to send any packet and be again put back to the end
of the wait queue sequentially, right behind the first sending thread.
This starvation cycle continues until some sending threads exceed their
retry limit and consequently fail.
This patch fixes the issue by two simple approaches:
(1) Any starved sending thread will be put to the head of the wait queue
while a served sending thread will be put to the tail;
(2) The most starved sending thread will be served first.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the debugpat kernel boot flag is turned on the following
traces are printed:
[ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000
[ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff],
track uncached-minus, req write-combining, ret uncached-minus
[ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray:
ffffc9000a980000
The ioremap_wc() clearly is not returning a write combining mapping due
to an overlap where the RcvArray is mapped in a uncached mapping prior
to creating the proposed write combining mapping.
The patch replaces the single base register for uncached CSRs that
used to overlap the RcvArray with two mappings. One, kregbase1, from the
bar0 up to the RcvArray and another, kregbase2, from the end of the
RcvArray to the pio send buffer space. A new dd field, base2_start,
is used to convert the zero-based offset in the CSR routines to the
correct kregbase1/kregbase2 mapping. A single direct write of the
RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access
using the new disjoint mapping.
Additionally, the kregend field is deleted since it is only ever written.
patdebug now shows the RcvArray as write combining:
[ 35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff],
track write-combining, req write-combining, ret write-combining
To insulate from any potential issues with write combining, all
writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill().
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Ensure that return values from kernel PCI config access
API calls in HFI driver are checked and react properly if
they are not expected (i.e. not successful).
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Bartlomiej Dudek <bartlomiej.dudek@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
I ran into this build error on linux-next:
drivers/infiniband/hw/hns/hns_roce_eq.c:477:8: error: unknown type name 'irqreturn_t'
static irqreturn_t hns_roce_msi_x_interrupt(int irq, void *eq_ptr)
^~~~~~~~~~~
drivers/infiniband/hw/hns/hns_roce_eq.c: In function 'hns_roce_msi_x_interrupt':
drivers/infiniband/hw/hns/hns_roce_eq.c:485:9: error: implicit declaration of function 'IRQ_RETVAL'; did you mean 'BPF_RVAL'? [-Werror=implicit-function-declaration]
return IRQ_RETVAL(int_work);
I have bisected this to a seemingly unrelated change that happened
to remove some indirect header inclusions. Simply including the
required header explicitly fixes the build failure.
Fixes: 09c7570480 ("xfrm: remove flow cache")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
bnxt_en depends on MAY_USE_DEVLINK; this is used to force bnxt_en
to be =m when DEVLINK is =m.
Now, bnxt_re selects bnxt_en. Unless bnxt_re also explicitly calls
out dependency on MAY_USE_DEVLINK, Kconfig does not force bnxt_re
to be =m when DEVLINK is =m, causing the following error:
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.o: In function
`bnxt_dl_register':
bnxt_vfr.c:(.text+0x1440): undefined reference to `devlink_alloc'
bnxt_vfr.c:(.text+0x14c0): undefined reference to `devlink_register'
bnxt_vfr.c:(.text+0x14e0): undefined reference to `devlink_free'
drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.o: In function
`bnxt_dl_unregister':
bnxt_vfr.c:(.text+0x1534): undefined reference to `devlink_unregister'
bnxt_vfr.c:(.text+0x153c): undefined reference to `devlink_free'
Fix this by adding MAY_USE_DEVLINK dependency in bnxt_re.
Fixes: 4ab0c6a8ff ("bnxt_en: add support to enable VF-representors")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 0day build system flags implicit includes as errors. A patch from
Matan Barak to allow hns_roce, an aarch64 specific RDMA driver, to be
built on other arches, but it resulted in build regressions. The
problem is that hns_roce_device.h needs a definition for __raw_writeq
but did not have an include to provide it. Add <linux/io.h> as an
include to resolve the issue.
Signed-off-by: Doug Ledford <dledford@redhat.com>
drivers/infiniband/hw/hns/hns_roce_hw_v1.c:2026:5-8: Unneeded variable: "ret". Return "0" on line 2046
Remove unneeded variable used to store return value.
Generated by: scripts/coccinelle/misc/returnvar.cocci
Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver")
CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
drivers/infiniband/hw/hns/hns_roce_qp.c:802:9-10: WARNING: return of 0/1 in function 'hns_roce_wq_overflow' with return type bool
Return statements in functions returning bool should use
true/false instead of 1/0.
Generated by: scripts/coccinelle/misc/boolreturn.cocci
Fixes: 7d1b6a678e0b ("IB/hns: Support compile test for hns RoCE driver")
CC: Matan Barak <matanb@mellanox.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Compiling the hns RoCE driver requires ARM architecture.
In order to simplify development of IB/core, support
compile test. Add the necessary includes for that too.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The initial patch for changing the stack to use RoCEv2 GIDs by default
set the CMA_PREFERRED_ROCE_GID_TYPE to an incorrect value. Instead of
an absolute value, we needed to set the right bit in a bitmask. Correct
the default setting so we use RoCEv2 by default.
Fixes: 63a5f483af (IB/cma: Set default gid type to RoCEv2)
Signed-off-by: Doug Ledford <dledford@redhat.com>
The number of supported WIDs, if they are supported at all, can be
limited due to resources. Notifying the user space application the
number of available WIDs allows it to utilize them correctly.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Direct Packet Mode support may be disabled, e.g, due to limited
resources. Notifying the user application prevents wasting cycles
on attempting to send these kind of packets.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in mlx5_ib_dbg message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds qp->s_ack_queue indices and size to qp_stats printout.
This information will provide information about the receiving side.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
As a final step to support RSS feature, expose the RSS capabilities in
query device verb.
It includes:
- Max rwq indirection tables.
- Max rwq indirection table size.
- Supported qp types.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to work with a RSS QP by using an indirection table object
upon QP creation. Other related QP verbs (e.g. modify/destroy/query) were
updated as well for that QP mode.
Notes:
- The RX hash properties are supplied as driver private data.
- The RSS QP port is used on the associated WQs in its indirection
table. Applying different ports during WQ life time is not allowed.
- The expected RSS QP flow is: create, modify(RST->INIT),
modify(RST->RTR), destroy.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To enable RSS functionality the IB indirection table object (i.e.
ib_rwq_ind_table) should be used.
This patch implements the related verbs as of create and destroy an
indirection table.
In downstream patches the indirection table will be used as part of RSS
QP creation.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Support create/modify/destroy WQ related verbs.
The base IB object to enable RSS functionality is a WQ (i.e. ib_wq).
This patch implements the related WQ verbs as of create, modify and
destroy.
In downstream patches the WQ will be used as part of an indirection
table (i.e. ib_rwq_ind_table) to enable RSS QP creation.
Notes:
ConnectX-3 hardware requires consecutive WQNs list as receive descriptor
queues for the RSS QP. Hence, the driver manages consecutive ranges lists
per context which the user must respect.
Destroying the WQ does not return its WQN back to its range for
reusing. However, destroying all WQs from the same range releases the
range and in turn releases its WQNs for reusing.
Since the WQ object is not a natural object in the hardware, the driver
implements the WQ by the hardware QP.
As such, the WQ inherits its port from its RSS QP parent upon its
RST->INIT transition and by that time its state is applied to the
hardware.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding visibility of resource usage of QPs, CQs and counters used by
virtual functions. This feature will be used to give the PF administrator
more data while debugging VF status. Usage info was added to ALLOC_RES
command, to notify the PF if the resource which is being reserved or
allocated for the VF will be used by kernel driver or by user verbs.
Updated reservation and allocation functions of QP, CQ and counter with
additional usage parameter.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When inline-receive is enabled, the HCA may write received
data into the receive WQE.
Inline-receive is enabled by setting its matching bit in
the QP context and each single-packet message with payload
not exceeding the receive WQE size will be delivered to
the WQE.
The completion report will indicate that the payload was placed to the WQE.
It includes:
1) Return maximum supported size of inline-receive by the hardware
in query_device vendor's data part.
2) Enable the feature when requested by the vendor data input.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds below requester and responder side error counters,
which will be exposed by hardware counters interface and are supported
as part of query Q counters command extension.
+---------------------------+-------------------------------------+
| Name | Description |
|---------------------------+-------------------------------------|
|resp_local_length_error | Number of times responder detected |
| | local length errors |
|---------------------------+-------------------------------------|
|resp_cqe_error | Number of CQEs completed with error |
| | at responder |
|---------------------------+-------------------------------------|
|req_cqe_error | Number of CQEs completed with error |
| | at requester |
|---------------------------+-------------------------------------|
|req_remote_invalid_request | Number of times requester detected |
| | remote invalid request error |
|---------------------------+-------------------------------------|
|req_remote_access_error | Number of times requester detected |
| | remote access error |
|---------------------------+-------------------------------------|
|resp_remote_access_error | Number of times responder detected |
| | remote access error |
|---------------------------+-------------------------------------|
|resp_cqe_flush_error | Number of CQEs completed with |
| | flushed with error at responder |
|---------------------------+-------------------------------------|
|req_cqe_flush_error | Number of CQEs completed with |
| | flushed with error at requester |
+---------------------------+-------------------------------------+
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The extended address vector is the highest bit in be32 variable,
but it was compared with the lowest. This patch fixes the endianness
of that check and removes already declared define.
Fixes: 17d2f88f92 ("IB/mlx5: Add ODP atomics support")
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When we have a miss in one order of the mkey cache, we try to get
an mkey from a higher order.
We still need to check that the higher order can be used with UMR
before using it. Otherwise, we will get an mkey with 0 entries and
the post send operation that is used to fill it will complete with
the following error:
mlx5_0:dump_cqe:275:(pid 0): dump error cqe
00000000 00000000 00000000 00000000
00000000 00000000 00000000 00000000
00000000 0f007806 25000025 49ce59d2
Fixes: 49780d42df ("IB/mlx5: Expose MR cache for mlx5_ib")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Report RX checksum capabilities when 'ipoib_enhanced_offloads'
capabilities are set and support checksum.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to add multicast flow steering support, there is need
to block the attaching of mcg flow for underlay QP, recognize
multicast IB_FLOW_SPEC_IPV4 based on its IP and enable
creating/destroying flow for IB layer.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Allow user space applications to accelerate send and receive
traffic which is typically handled by IPoIB ULP by creating
a UD QP with a given source QPN of the IPoIB UD QP.
UD QP with a given source QPN should basically be similar to
RAW QP from point of view of its created resources.
However,
- Its TIS should point to the source QPN.
- Modify can be done only on its state as the transport attributes
are managed by its source QP.
This patch manages below:
- Creating/destroying/modifying UD QP with a given source QPN.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Enable QP creation with a given source QP number, the created QP will
use the source QPN as its wire QP number.
To create such a QP, root privileges (i.e. CAP_NET_RAW) are required
from the user application.
This comes as a pre-patch for downstream patches in this series to
allow user space applications to accelerate traffic which is typically
handled by IPoIB ULP.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When creating address handle from multicast GID, set MAC according to
the appropriate formula instead of searching for it in the GID table:
- For IPv4 multicast GID use ip_eth_mc_map().
- For IPv6 multicast GID use ipv6_eth_mc_map().
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RoCEv2 Annex states that for RoCEv2 over IPv4, the corresponding
IPv4 address is encoded into the GID according to the following rule:
GID= :ffff:<IPv4 address>
Remove the 0xff0e prefix for RoCEv2 packets with IPv4 and leave it
zeroed and change rdma_is_multicast_addr() to consider the new logic.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RoCE Annex (A16.9.10/11) declares that during attach (detach) QP to a
multicast group, if the QP is associated with a RoCE port, the
multicast group MLID is unused and is ignored.
During attach or detach multicast, when the QP is associated with a
port, it is enough to check the port's link layer and validate the
LID only if it is Infiniband. Otherwise, avoid validating the
multicast LID.
Fixes: 8561eae60f ("IB/core: For multicast functions, verify that LIDs are multicast LIDs")
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add debugfs interface for monitor the number of delay drop timeout
events and the number of existing dropless RQs in the system.
In addition add debugfs interface for configuring the global timeout value
which is used in the SET_DELAY_DROP command.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RQs that were configured for "delay drop" will prevent packet drops
when their WQEs are depleted.
Marking an RQ to be drop-less is done by setting delay_drop_en in RQ
context using CREATE_RQ command.
Since this feature is globally activated/deactivated by using the
SET_DELAY_DROP command on all the marked RQs, we activated/deactivated
it according to the number of RQs with 'delay_drop' enabled.
When timeout is expired, then the feature is deactivated. Therefore
the driver handles the delay drop timeout event and reactivate it.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When a user sets port_guid, node_guid or policy of an IB virtual
function, save this information in "struct mlx5_vf_context".
This information will be restored later when pci_resume is called.
To make sure this works, one can use aer-inject to generate PCI
errors on mlx5 devices and verify if relevant fields are restored
after PCI resume.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds debug control parameters for congestion control which
can be read or written through debugfs. They are for reaction point and
notification point nodes.
These control parameters are as below:
+------------------------------+-----------------------------------------+
| Name | Description |
|------------------------------+-----------------------------------------|
|rp_clamp_tgt_rate | When set target rate is updated to |
| | current rate |
|------------------------------+-----------------------------------------|
|rp_clamp_tgt_rate_ati | When set update target rate based on |
| | timer as well |
|------------------------------+-----------------------------------------|
|rp_time_reset | time between rate increase if no |
| | CNP is received unit in usec |
|------------------------------+-----------------------------------------|
|rp_byte_reset | Number of bytes between rate inease if |
| | no CNP is received |
|------------------------------+-----------------------------------------|
|rp_threshold | Threshold for reaction point rate |
| | control |
|------------------------------+-----------------------------------------|
|rp_ai_rate | Rate for target rate, unit in Mbps |
|------------------------------+-----------------------------------------|
|rp_hai_rate | Rate for hyper increase state |
| | unit in Mbps |
|------------------------------+-----------------------------------------|
|rp_min_dec_fac | Minimum factor by which the current |
| | transmit rate can be changed when |
| | processing a CNP, unit is percerntage |
|------------------------------+-----------------------------------------|
|rp_min_rate | Minimum value for rate limit, |
| | unit in Mbps |
|------------------------------+-----------------------------------------|
|rp_rate_to_set_on_first_cnp | Rate that is set when first CNP is |
| | received, unit is Mbps |
|------------------------------+-----------------------------------------|
|rp_dce_tcp_g | Used to calculate alpha |
|------------------------------+-----------------------------------------|
|rp_dce_tcp_rtt | Time between updates of alpha value, |
| | unit is usec |
|------------------------------+-----------------------------------------|
|rp_rate_reduce_monitor_period | Minimum time between consecutive rate |
| | reductions |
|------------------------------+-----------------------------------------|
|rp_initial_alpha_value | Initial value of alpha |
|------------------------------+-----------------------------------------|
|rp_gd | When CNP is received, flow rate is |
| | reduced based on gd, rp_gd is given as |
| | log2(rp_gd) |
|------------------------------+-----------------------------------------|
|np_cnp_dscp | dscp code point for generated cnp |
|------------------------------+-----------------------------------------|
|np_cnp_prio_mode | 802.1p priority for generated cnp |
|------------------------------+-----------------------------------------|
|np_cnp_prio | cnp priority mode |
+------------------------------+-----------------------------------------+
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The old logic ignored link state. This led to missing IB events like
when link goes down on the switch while admin state is up or to redundant
events like when admin state goes up while link is down.
To fix that, probe the port state on NETDEV events and compare to last
known state to decide if IB events needs to be dispatched.
FIxes: 5ec8c83e3a ("IB/mlx5: Port events in RoCE now rely on netdev events")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently, unicast/multicast loopback raw ethernet
(non-RDMA) packets are sent back to the vport.
A unicast loopback packet is the packet with destination
MAC address the same as the source MAC address.
For multicast, the destination MAC address is in the
vport's multicast filter list.
Moreover, the local loopback is not needed if
there is one or none user space context.
After this patch, the raw ethernet unicast and multicast
local loopback are disabled by default. When there is more
than one user space context, the local loopback is enabled.
Note that when local loopback is disabled, raw ethernet
packets are not looped back to the vport and are forwarded
to the next routing level (eswitch, or multihost switch,
or out to the wire depending on the configuration).
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch allows driver to post send and receive
requests on QPs which are in error state.
Instead of flushing the QP in the context of polling
error CQEs, the QPs will be added to a flush list
maintained per CQ. QP state is moved to error.
QP is added to flush list if the user moves it
to error state using modify_qp also. After polling the HW
CQ in poll_cq routine, this flush list is traversed
and driver completes work requests on each QP in the flush
list, till the budget expires. The QP is moved out of
flush list during QP destroy or during modify_QP to RESET.
When ULPs post Work Requests while QP is in error state,
driver will store the ULP data and then increment the
QP producer s/w index, without ringing doorbell. It then
schedules a worker to invoke the CQ handler since the
interrupts wont be generated from the HW for this request.
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current implementation does not program vlan header insertion
in RoCE packet if no vlan is configured. Firmware does not add
prority when there is no vlan tag in the packet. Modify the code
to insert vlan header when PFC is enabled on the interface.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All modules in drivers/infiniband defined and used MODULE_VERSION, which
was pointless because the kernel version describes their state more accurate
then those arbitrary numbers.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Sagi Grimbrg <sagi@grimberg.me>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Ram Amrani <Ram.Amrani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Adit Ranadive <aditr@vmware.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Logic of retrieving netdev speed from net_device and translating it to
IB speed is implemented in rxe, in usnic and in bnxt drivers.
Define new function which merges all.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Christian Benvenuti <benve@cisco.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is no need to return always zero for function which is not
supported. The IB stack treats uninitialized ib_device->functions as
not implemented.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
RoCEv2 is the preferred RDMA protocol for Ethernet link layer because
of its advantages over RoCEv1. For better user experience make it the
default choice for RDMA_CM connections if device/port support it.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Constify static rxe_vm_ops that is never modified.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Its better to use __func__ to print functions name instead of writing
the name in the print statement.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Use DEVICE_ATTR RO() macro and rename the show function accordingly.
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify QP can fail and it can be acceptable, like when moving from RST to
ERR state, all the rest are not acceptable and a message to the log
should be printed.
The current code prints on all failures and many messages like:
"Failed to modify QP to ERROR state" appear, even when supported by the
state machine of the QP object.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The commit ebc9ca43e1 ("IB/core: Allow QP state transition from reset to error")
allowed transition from Reset to Error state for the QPs. This behavior
doesn't follow the IBTA specification 1.3, which in 10.3.1 QUEUE PAIR AND
EE CONTEXT STATES section.
The quote from the spec:
"An error can be forced from any state, except Reset, with
the Modify QP/EE Verb."
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
There is no need to assign "p" pointer twice.
This patch fixes the following smatch warning:
drivers/infiniband/ulp/ipoib/ipoib_cm.c:517 ipoib_cm_rx_handler() warn:
missing break? reassigning 'p->id'
Fixes: 839fcaba35 ("IPoIB: Connected mode experimental support")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Refactor error paths in ipoib_add_port() function. The code flow
ensures that the function terminates on every error flow and it makes
redundant all "else" cases.
The functions are called during the flow are returning "result < 0", in
case of error, so there is no need to check it explicitly.
Fixes: 58e9cc90cd ("IB/IPoIB: Fix bad error flow in ipoib_add_port()")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Update the multicast counter when multicast packets are received and
provide this information through ethtool support.
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Set IPOIB_NEIGH_TBL_FLUSH bit after initializing the neighbor
flushed completion, otherwise the garbage collector may signal
a completion while it is not initialized yet.
Fixes: b63b70d877 ("IPoIB: Use a private hash table for path lookup in xmit path")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Don't allow negative values to max_nonsrq_conn_qp. There is no functional
impact on a negative value but it is logicically incorrect.
Fixes: 68e995a295 ("IPoIB/cm: Add connected mode support for devices without SRQs")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
While cleaning neighs and there is a send-only mcast neigh, the driver
should wait to finish its join process before trying to remove it.
Without this patch, we will see messages like: "ipoib_mcast_leave on an
in-flight join" and unexpected results in the join_complete.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The work mcast_task can re-queue itself, so instead of doing
cancel && flush_workqueue, that still can leave a queued task
on the air, use cancel_delayed_work_sync.
Also, no need to use lock over the cancel, the original lock was
due to bit assignment setting (IPOIB_MCAST_RUN) that is not in use
anymore.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
A potential race between light_event and interface restart
may attach multicast group to an already attached QP.
Scenario:
light_event flow goes through ipoib_mcast_dev_flush function,
if a context switch occurs before calling ipoib_mcast_remove_list,
then we may face a situation where the broadcast of the priv is null
and the corresponding QP is not detached yet.
If an "interface restart" runs during the previous context switch,
the following scenario occurs:
When the device goes up, ipoib_ib_dev_up function will be called,
it will send a new registration request to the broadcast group and then
attach the group to the QP that was not detached before.
IPOIB_FLUSH_LIGHT INTERFACE RESTART
__ipoib_ib_dev_flush |
| |
| |
| |
ipoib_mcast_dev_flush |
Move mcast list and broadcast to remove_list |
| |
| |
Context Switch--> |
| ipoib_ib_dev_down
| |
| |
| ipoib_ib_dev_up
| |
| |
| ipoib_mcast_join_task
| allocate new broadcast
| |
| |
| Attach QP to multicast group
| |
| |
| <--Context Switch
ipoib_mcast_leave
Detach QP from multicast group
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Initialize the port_num for iWARP in rdma_init_qp_attr.
Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds")
Cc: <stable@vger.kernel.org> # v2.6.14+
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The port number is only valid if IB_QP_PORT is set in the mask.
So only check port number if it is valid to prevent modify_qp from
failing due to an invalid port number.
Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds")
Cc: <stable@vger.kernel.org> # v2.6.14+
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We might get some bogus error completions in case the target will
remotely invalidate the rkey and the HCA will need to retransmit
from this buffer.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
