noc/axi/ahb are bus clk, not peripheral clk.
Since peripheral clk has a limitation that for peripheral clock slice,
IP clock slices must be stopped to change the clock source.
However if the bus clk is marked as critical clk peripheral, the
assigned clock parent operation will fail.
So we added CLK_SET_PARENT_GATE flag to avoid glitch.
And add imx8m_clk_hw_composite_bus_critical for bus critical clock usage
Fixes: 936c383673 ("clk: imx: fix composite peripheral flags")
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1604229834-25594-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Nesting container_of() causes warnings with W=2, which is
annoying if it happens in headers and fills the build log
like:
In file included from drivers/clk/qcom/clk-alpha-pll.c:6:
drivers/clk/qcom/clk-alpha-pll.c: In function 'clk_alpha_pll_hwfsm_enable':
include/linux/kernel.h:852:8: warning: declaration of '__mptr' shadows a previous local [-Wshadow]
852 | void *__mptr = (void *)(ptr); \
| ^~~~~~
drivers/clk/qcom/clk-alpha-pll.c:155:31: note: in expansion of macro 'container_of'
155 | #define to_clk_alpha_pll(_hw) container_of(to_clk_regmap(_hw), \
| ^~~~~~~~~~~~
drivers/clk/qcom/clk-regmap.h:27:28: note: in expansion of macro 'container_of'
27 | #define to_clk_regmap(_hw) container_of(_hw, struct clk_regmap, hw)
| ^~~~~~~~~~~~
drivers/clk/qcom/clk-alpha-pll.c:155:44: note: in expansion of macro 'to_clk_regmap'
155 | #define to_clk_alpha_pll(_hw) container_of(to_clk_regmap(_hw), \
| ^~~~~~~~~~~~~
drivers/clk/qcom/clk-alpha-pll.c:254:30: note: in expansion of macro 'to_clk_alpha_pll'
254 | struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
| ^~~~~~~~~~~~~~~~
include/linux/kernel.h:852:8: note: shadowed declaration is here
852 | void *__mptr = (void *)(ptr); \
| ^~~~~~
Redefine two copies of the to_clk_regmap() macro as inline functions
to avoid a lot of these.
Fixes: ea11dda9e0 ("clk: meson: add regmap clocks")
Fixes: 085d7a4554 ("clk: qcom: Add a regmap type clock struct")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201026161411.3708639-1-arnd@kernel.org
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use a more generic form for __section that requires quotes to avoid
complications with clang and gcc differences.
Remove the quote operator # from compiler_attributes.h __section macro.
Convert all unquoted __section(foo) uses to quoted __section("foo").
Also convert __attribute__((section("foo"))) uses to __section("foo")
even if the __attribute__ has multiple list entry forms.
Conversion done using the script at:
https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SoC changes, a substantial part of this is cleanup of some of the older
platforms that used to have a bunch of board files. In particular:
- Removal of non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP platforms,
moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
THere are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones re:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP
-----BEGIN PGP SIGNATURE-----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=0+Ee
-----END PGP SIGNATURE-----
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
of various clk driver updates. The biggest driver updates in terms of lines of
code is the Allwinner driver, closely followed by the Qualcomm and Mediatek
drivers. All of those hit high because we add so many lines of clk data. Coming
in fourth place is i.MX which also adds a bunch of clk data. This accounts for
the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for various clk
drivers that have baked in linux-next for a while. I suppose one highlight or
theme is that more clk drivers are being updated to work as modules, which is
interesting to see such critical SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory
-----BEGIN PGP SIGNATURE-----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=sKI8
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This contains no changes to the core framework. It is a collection of
various clk driver updates.
The biggest driver updates in terms of lines of code is the Allwinner
driver, closely followed by the Qualcomm and Mediatek drivers. All of
those hit high because we add so many lines of clk data. Coming in
fourth place is i.MX which also adds a bunch of clk data. This
accounts for the new driver additions this time around.
Otherwise the patches are lots of little cleanups and fixes for
various clk drivers that have baked in linux-next for a while. I
suppose one highlight or theme is that more clk drivers are being
updated to work as modules, which is interesting to see such critical
SoC infrastructure work as a loadable module.
New Drivers:
- Support qcom SM8150/SM8250 video and display clks
- Support Mediatek MT8167 clks
- Add clock for CRC block found on vf610 SoCs
- Add support for the Renesas R-Car V3U (R8A779A0) SoC
- Add support for the VSP for Resizing clock on Renesas RZ/G1H
- Support Allwinner A100 SoC clks
Removed Drivers:
- Remove i.MX21 clock driver, as i.MX21 platform support is being
dropped
Updates:
- Change how qcom's display port clks work
- Small non-critical fixes for TI clk driver
- Remove various unused variables in clk drivers
- Allow Rockchip clk driver to be a module
- Remove most __clk_lookup() calls in Samsung drivers (yay!)
- Support building i.MX ARMv8 platforms clock driver as module
- Some kerneldoc fixes here and there
- A couple of minor i.MX clk data corrections
- Update audio clock inverter and fdiv2 flag on Amlogic g12
- Make amlogic clk drivers configurable in Kconfig
- Fix Renesas VSP clock names to match corrected hardware
documentation
- Sigma-delta modulation on Allwinner R40
- Various fixes for at91 clk driver
- Use semicolons instead of commas in some places
- Mark some variables const so they can move to RO memory"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (102 commits)
clk: imx8mq: Fix usdhc parents order
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
clk: at91: sam9x60: support only two programmable clocks
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
clk: clk-prima2: fix return value check in prima2_clk_init()
clk: mmp2: Fix the display clock divider base
clk: pxa: Constify static struct clk_ops
clk: baikal-t1: Mark Ethernet PLL as critical
clk: qoriq: modify MAX_PLL_DIV to 32
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
...
- Support qcom SM8150/SM8250 video and display clks
- Change how qcom's display port clks work
* clk-ingenic:
clk: ingenic: Respect CLK_SET_RATE_PARENT in .round_rate
clk: ingenic: Don't tag custom clocks with CLK_SET_RATE_PARENT
clk: ingenic: Don't use CLK_SET_RATE_GATE for PLL
clk: ingenic: Use readl_poll_timeout instead of custom loop
clk: ingenic: Use to_clk_info() macro for all clocks
* clk-at91:
clk: at91: sam9x60: support only two programmable clocks
clk: at91: clk-sam9x60-pll: remove unused variable
clk: at91: clk-main: update key before writing AT91_CKGR_MOR
clk: at91: remove the checking of parent_name
* clk-kconfig:
clk: Restrict CLK_HSDK to ARC_SOC_HSDK
* clk-imx:
clk: imx8mq: Fix usdhc parents order
clk: imx: imx21: Remove clock driver
clk: imx: gate2: Fix a few typos
clk: imx: Fix and update kerneldoc
clk: imx: fix i.MX7D peripheral clk mux flags
clk: imx: fix composite peripheral flags
clk: imx: Correct the memrepair clock on imx8mp
clk: imx: Correct the root clk of media ldb on imx8mp
clk: imx: vf610: Add CRC clock
clk: imx: Explicitly include bits.h
clk: imx8qxp: Support building i.MX8QXP clock driver as module
clk: imx8m: Support module build
clk: imx: Add clock configuration for ARMv7 platforms
clk: imx: Support building i.MX common clock driver as module
clk: composite: Export clk_hw_register_composite()
clk: imx6sl: Use BIT(x) to avoid shifting signed 32-bit value by 31 bits
* clk-qcom:
clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on
clk: qcom: Add display clock controller driver for SM8150 and SM8250
dt-bindings: clock: add QCOM SM8150 and SM8250 display clock bindings
clk: qcom: add video clock controller driver for SM8250
clk: qcom: add video clock controller driver for SM8150
dt-bindings: clock: add SM8250 QCOM video clock bindings
dt-bindings: clock: add SM8150 QCOM video clock bindings
dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc
clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs
clk/qcom: fix spelling typo
clk: qcom: gcc-sdm660: Fix wrong parent_map
clk: qcom: dispcc: Update DP clk ops for phy design
clk: qcom: gcc-msm8939: remove defined but not used variables
clk: qcom: ipq8074: make pcie0_rchng_clk_src static
* clk-prima2:
clk: clk-prima2: fix return value check in prima2_clk_init()
* clk-bcm:
clk: bcm2835: add missing release if devm_clk_hw_register fails
clk: bcm: rpi: Add register to control pixel bvb clk
* clk-semicolon:
clk: meson: use semicolons rather than commas to separate statements
clk: mvebu: ap80x-cpu: use semicolons rather than commas to separate statements
clk: uniphier: use semicolons rather than commas to separate statements
* clk-axi-clkgen:
clk: axi-clkgen: Set power bits for fractional mode
clk: axi-clkgen: Add support for fractional dividers
* clk-qoriq:
clk: qoriq: modify MAX_PLL_DIV to 32
* clk-baikal:
clk: baikal-t1: Mark Ethernet PLL as critical
* clk-const:
clk: pxa: Constify static struct clk_ops
* clk-mmp2:
clk: mmp2: Fix the display clock divider base
According to the latest RM (see Table 5-1. Clock Root Table),
both usdhc root clocks have the parent order as follows:
000 - 25M_REF_CLK
001 - SYSTEM_PLL1_DIV2
010 - SYSTEM_PLL1_CLK
011 - SYSTEM_PLL2_DIV2
100 - SYSTEM_PLL3_CLK
101 - SYSTEM_PLL1_DIV3
110 - AUDIO_PLL2_CLK
111 - SYSTEM_PLL1_DIV8
So the audio_pll2_out and sys3_pll_out have to be swapped.
Fixes: b80522040c ("clk: imx: Add clock driver for i.MX8MQ CCM")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reported-by: Cosmin Stefan Stoica <cosmin.stoica@nxp.com>
Link: https://lore.kernel.org/r/1602753944-30757-1-git-send-email-abel.vesa@nxp.com
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If the GDSC is enabled out of boot but doesn't have the retain ff bit
set we will get confusing results where the registers that are powered
by the GDSC lose their contents on the first power off of the GDSC but
thereafter they retain their contents. This is because gdsc_init() fails
to make sure the RETAIN_FF bit is set when it probes the GDSC the first
time and thus powering off the GDSC causes the register contents to be
reset. We do set the RETAIN_FF bit the next time we power on the GDSC,
see gdsc_enable(), so that subsequent GDSC power off's don't lose
register contents state.
Forcibly set the bit at device probe time so that the kernel's assumed
view of the GDSC is consistent with the state of the hardware. This
fixes a problem where the audio PLL doesn't work on sc7180 when the
bootloader leaves the lpass_core_hm GDSC enabled at boot (e.g. to make a
noise) but critically doesn't set the RETAIN_FF bit.
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Taniya Das <tdas@codeaurora.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Fixes: 173722995c ("clk: qcom: gdsc: Add support to enable retention of GSDCR")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20201017020137.1251319-1-sboyd@kernel.org
Reviewed-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org>
The HSDK PLL driver is only useful when building for an ARC HSDK
platform.
As ARC selects OF, the dependency on OF can just be replaced by a
dependency on ARC_SOC_HSDK.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200807094351.1046-1-geert+renesas@glider.be
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
According to datasheet (Chapter 29.16.13, PMC Programmable Clock Register)
there are only two programmable clocks on SAM9X60.
Fixes: 01e2113de9 ("clk: at91: add sam9x60 pmc driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1602686072-28296-1-git-send-email-claudiu.beznea@microchip.com
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Clocks that don't have a divider are in our case all marked with the
CLK_SET_RATE_PARENT flag. In this case, the .round_rate implementation
should modify the value pointed to by parent_rate, in order to propagate
the rate change to the parent, as explained in the documentation of
clk_set_rate().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-5-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The custom clocks have custom functions to round, get or set their rate.
Therefore, we can't assume that they need the CLK_SET_RATE_PARENT flag.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-4-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
CLK_SET_RATE_GATE means that the clock must be gated when being
reclocked. This is not the case for the PLLs in Ingenic SoCs.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-3-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Use the readl_poll_timeout() function instead of rolling our own
busy-wait loops. This makes the code simpler.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-2-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The to_clk_info() previously had a BUG_ON() to check that it was only
called for PLL clocks. Yet, all the other clocks were doing the exact
same thing the macro does, in-line.
Move the to_clk_info() macro to the top of the file, remove the
hardcoded BUG_ON(), and use it everywhere it makes sense.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20200903015048.3091523-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In the implementation of bcm2835_register_pll(), the allocated pll is
leaked if devm_clk_hw_register() fails to register hw. Release pll if
devm_clk_hw_register() fails.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20200809231202.15811-1-navid.emamdoost@gmail.com
Fixes: 41691b8862 ("clk: bcm2835: Add support for programming the audio domain clocks")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Fix variable set but not used compilation warning.
Fixes: 43b1bb4a9b ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/1598338751-20607-4-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SAMA5D2 datasheet specifies on chapter 33.22.8 (PMC Clock Generator
Main Oscillator Register) that writing any value other than
0x37 on KEY field aborts the write operation. Use the key when
selecting main clock parent.
Fixes: 27cb1c2083 ("clk: at91: rework main clk implementation")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1598338751-20607-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is no need to check parent_name variable while assigning it to
init.parent_names. parent_name variable is already checked at
the beginning of at91_clk_register_peripheral() function.
Fixes: 6114067e43 ("clk: at91: add PMC peripheral clocks")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1598338751-20607-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In case of error, the function clk_register() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200921034522.9077-1-vulab@iscas.ac.cn
Acked-by: Barry Song <baohua@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Constify a couple of static struct clk_ops that are not modified. Their
only usage is inside the macros and their address is passed to
clk_register_composite() which takes pointers to const struct clk_ops.
This allows the compiler to put them in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Link: https://lore.kernel.org/r/20200922184715.1854-1-rikard.falkeborn@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We've discovered that disabling the so called Ethernet PLL causes reset of
the devices consuming its outgoing clock. The resets happen automatically
even if each underlying clock gate is turned off. Due to that we can't
disable the Ethernet PLL until the kernel is prepared for the corresponding
resets. So for now just mark the PLL clock provider as critical.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: linux-mips@vger.kernel.org
Link: https://lore.kernel.org/r/20200920110335.18034-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Using the fractional dividers requires some additional power bits to be
set.
The fractional power bits are not documented and the current heuristic
for setting them seems be insufficient for some cases. Just always set all
the fractional power bits when in fractional mode.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001085948.21412-2-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The axi-clkgen has (optional) fractional dividers on the output clock
divider and feedback clock divider path. Utilizing the fractional dividers
allows for a better resolution of the output clock, being able to
synthesize more frequencies.
Rework the driver support to support the fractional register fields, both
for setting a new rate as well as reading back the current rate from the
hardware.
For setting the rate if no perfect divider settings were found in
non-fractional mode try again in fractional mode and see if better settings
can be found. This appears to be the recommended mode of operation.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001085948.21412-1-alexandru.ardelean@analog.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the display clock controller found on SM8150 and SM8250.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> (SM8250)
Link: https://lore.kernel.org/r/20200927190653.13876-3-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the video clock controller found on SM8250 based devices.
Derived from the downstream driver.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200923160635.28370-6-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the video clock controller found on SM8150 based devices.
Derived from the downstream driver.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20200923160635.28370-5-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This change adds GDSCs, resets and most of the missing
clocks to the msm8994 GCC driver. The remaining ones
are of local_vote_clk and gate_clk type, which are not
yet supported upstream. Also reorder them to match the
original downstream driver.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20201005145855.149206-1-konradybcio@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the following clock support for MT8167 SoC: topckgen, apmixedsys,
infracfg, audsys, imgsys, mfgcfg, vdecsys.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/20200918132303.2831815-2-fparent@baylibre.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We can get down to this return value from ERR_CAST() without
initializing hw. Set it to -ENOMEM so that we always return something
sane.
Fixes the following smatch warning:
drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() error: uninitialized symbol 'hw'.
drivers/clk/rockchip/clk-half-divider.c:228 rockchip_clk_register_halfdiv() warn: passing zero to 'ERR_CAST'
Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Fixes: 956060a527 ("clk: rockchip: add support for half divider")
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- A series from Fabio Estevam to remove legacy non-DT i.MX platforms
support and related board files. This is a natural move, as the
platforms had been converted to DT for years, and we have not seen
any users around these legacy non-DT support for a while.
- Enable cpufreq support for i.MX7ULP platform.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl9qmaAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6OUAgAtFkBiF4YeAh7AoHbCHnecot5Ywbv
cvv9dktXBJNjzZSIO8RbvDterNHuamQm433CDz9GYBb2hMWM0ZvlARn2lj+ixX0e
vbQs2DUu7XNvxpGxsKCDbs9DNJmjsnfTLKjXd6D/OYD0+QRgYJJAqLt0rbzSqY3k
2R5yy3yLqJRQ5kGKDde+QQj2uFc1flfSsTXugbmYpsu3xPYXKmIwTqy4wgVUgXWg
CUEZDXFi5Wny+uKMnVtojm0Xyj2+R8HutHWBmEgkhtItgjrf9+OamnIBtvCWUtXe
+7PQswaZsdmbtzB0P9nHRsMjAEJhBxUmUb0X2piOI0vPfkGIBygDzs2nxQ==
=QAok
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc
i.MX SoC update for 5.10:
- A series from Fabio Estevam to remove legacy non-DT i.MX platforms
support and related board files. This is a natural move, as the
platforms had been converted to DT for years, and we have not seen
any users around these legacy non-DT support for a while.
- Enable cpufreq support for i.MX7ULP platform.
* tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: imx: Remove remnant board file support pieces
ARM: imx: Remove imx device directory
ARM: imx: Remove iomux-v3 board code
ARM: imx3: Remove imx3 soc_init()
ARM: imx31: Remove remaining i.MX31 board code
ARM: imx27: Retrieve AVIC base address from devicetree
ARM: imx27: Get rid of mm-imx27.c
ARM: imx27: Remove iomux-v1 board code
ARM: imx27: Remove imx27_soc_init()
ARM: imx7ulp: enable cpufreq
...
Link: https://lore.kernel.org/r/20200923073009.23678-2-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
The provider variable is already dereferenced earlier in this function.
Drop the check for NULL as it is impossible.
Found with smatch
drivers/clk/tegra/clk-tegra210-emc.c:131 tegra210_clk_emc_set_rate() warn: variable dereferenced before check 'provider' (see line 124)
Cc: Joseph Lo <josephl@nvidia.com>
Cc: Thierry Reding <treding@nvidia.com>
Fixes: 0ac65fc946 ("clk: tegra: Implement Tegra210 EMC clock")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200922191641.2305144-1-sboyd@kernel.org
Acked-by: Thierry Reding <treding@nvidia.com>
Fix a memory leak induced by not calling clk_put after doing of_clk_get.
Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907082600.454-3-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk pointer passed to omap2_clk_(deny|allow)_idle can be NULL, so
add checks for this.
Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907082600.454-2-t-kristo@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Currently, we request exact clock rates from the firmware to be set with
set_rate. Due to some rounding errors and internal functionality of the
firmware itself, this can fail. Thus, add some slack to the set_rate
functionality so that we are always guaranteed to pass. The firmware
always attempts to use frequency as close to the target freq as
possible despite the slack given here.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907085740.1083-4-t-kristo@ti.com
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Cache results of the latest query rate operation. This optimizes the
firmware interface a bit, avoiding unnecessary calls to firmware if we
know the result already; the firmware interface is pretty expensive
to use for query rate functionality.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907085740.1083-3-t-kristo@ti.com
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The DT clock probe loop incorrectly terminates after processing "clocks"
only, fix this by re-starting the loop when all entries for current
DT property have been parsed.
Fixes: 8e48b33f9d ("clk: keystone: sci-clk: probe clocks from DT instead of firmware")
Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Link: https://lore.kernel.org/r/20200907085740.1083-2-t-kristo@ti.com
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
./drivers/clk/mediatek/clk-mt6765.c:912:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Fixes: 1aca9939bf ("clk: mediatek: Add MT6765 clock support")
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1600761065-71353-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
