I knew already when rewriting the sacktag that this condition
was too conservative, change it now since it prevent lot of
useless work (especially in the sack shifter decision code
that is being added by a later patch). This shouldn't change
anything really, just save some processing regardless of the
shifter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
I always had thought that collapsing up to two at a time was
intentional decision to avoid excessive processing if 1 byte
sized skbs are to be combined for a full mtu, and consecutive
retransmissions would make the size of the retransmittee
double each round anyway, but some recent discussion made me
to understand that was not the case. Thus make collapse work
more and wait less.
It would be possible to take advantage of the shifting
machinery (added in the later patch) in the case of paged
data but that can be implemented on top of this change.
tcp_skb_is_last check is now provided by the loop.
I tested a bit (ss-after-idle-off, fill 4096x4096B xfer,
10s sleep + 4096 x 1byte writes while dropping them for
some a while with netem):
. 16774097:16775545(1448) ack 1 win 46
. 16775545:16776993(1448) ack 1 win 46
. ack 16759617 win 2399
P 16776993:16777217(224) ack 1 win 46
. ack 16762513 win 2399
. ack 16765409 win 2399
. ack 16768305 win 2399
. ack 16771201 win 2399
. ack 16774097 win 2399
. ack 16776993 win 2399
. ack 16777217 win 2399
P 16777217:16777257(40) ack 1 win 46
. ack 16777257 win 2399
P 16777257:16778705(1448) ack 1 win 46
P 16778705:16780153(1448) ack 1 win 46
FP 16780153:16781313(1160) ack 1 win 46
. ack 16778705 win 2399
. ack 16780153 win 2399
F 1:1(0) ack 16781314 win 2399
While without drop-all period I get this:
. 16773585:16775033(1448) ack 1 win 46
. ack 16764897 win 9367
. ack 16767793 win 9367
. ack 16770689 win 9367
. ack 16773585 win 9367
. 16775033:16776481(1448) ack 1 win 46
P 16776481:16777217(736) ack 1 win 46
. ack 16776481 win 9367
. ack 16777217 win 9367
P 16777217:16777218(1) ack 1 win 46
P 16777218:16777219(1) ack 1 win 46
P 16777219:16777220(1) ack 1 win 46
...
P 16777247:16777248(1) ack 1 win 46
. ack 16777218 win 9367
. ack 16777219 win 9367
...
. ack 16777233 win 9367
. ack 16777248 win 9367
P 16777248:16778696(1448) ack 1 win 46
P 16778696:16780144(1448) ack 1 win 46
FP 16780144:16781313(1169) ack 1 win 46
. ack 16780144 win 9367
F 1:1(0) ack 16781314 win 9367
The window seems to be 30-40 segments, which were successfully
combined into: P 16777217:16777257(40) ack 1 win 46
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can reduce pressure on dst entry refcount that slowdown UDP transmit
path on SMP machines. This pressure is visible on RTP servers when
delivering content to mediagateways, especially big ones, handling
thousand of streams. Several cpus send UDP frames to the same
destination, hence use the same dst entry.
This patch makes ip_push_pending_frames() steal the refcount its
callers had to take when filling inet->cork.dst.
This doesnt avoid all refcounting, but still gives speedups on SMP,
on UDP/RAW transmit path.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can reduce pressure on dst entry refcount that slowdown UDP transmit
path on SMP machines. This pressure is visible on RTP servers when
delivering content to mediagateways, especially big ones, handling
thousand of streams. Several cpus send UDP frames to the same
destination, hence use the same dst entry.
This patch makes ip_append_data() eventually steal the refcount its
callers had to take on the dst entry.
This doesnt avoid all refcounting, but still gives speedups on SMP,
on UDP/RAW transmit path
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gen_kill_estimator() linear lists lookups are very slow, and e.g. while
deleting a large number of HTB classes soft lockups were reported. Here
is another try to fix this problem: this time internally, with rbtree,
so similarly to Jamal's hashing idea IIRC. (Looking for next hits could
be still optimized, but it's really fast as it is.)
Reported-by: Badalian Vyacheslav <slavon@bigtelecom.ru>
Reported-by: Denys Fedoryshchenko <denys@visp.net.lb>
Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Acked-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jarek Poplawski points out:
If all child qdiscs of sch_drr are non-work-conserving (e.g. sch_tbf)
drr_dequeue() will busy-loop waiting for skbs instead of leaving the
job for a watchdog. Checking for list_empty() in each loop isn't
necessary either, because this can never be true except the first time.
Using non-work-conserving qdiscs as children of DRR makes no sense,
simply bail out in that case.
Reported-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This use of netdev->priv is wrong.
The right way is:
alloc_netdev() with no memory for private data.
make netdev->ml_priv to point to c2_dev.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Acked-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. convert netdev->priv to netdev_priv().
2. make sbni_pci_probe() be static.
Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Freeing previously allocated buffers in case of error.
Signed-off-by: Jirka Pirko <jirka@pirko.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointed out by Joe Perches. Error message after tx_ring allocation check was
wrong.
Signed-off-by: Jirka Pirko <jirka@jirka.pirko.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixed typo when allocating rx_ring, tx_ring was checked for null instead.
Signed-off-by: Jirka Pirko <jirka@pirko.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using call by reference use the PTR_ERR macros to handle
return value with error case. Compile tested only.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is still a call to sock_prot_inuse_add() in af_netlink
while in a preemptable section. Add explicit BH disable around
this call.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rule of calling sock_prot_inuse_add() is that BHs must
be disabled. Some new calls were added where this was not
true and this tiggers warnings as reported by Ilpo.
Fix this by adding explicit BH disabling around those call sites,
or moving sock_prot_inuse_add() call inside an existing BH disabled
section.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus mentioned we could try to perform long word operations, even
on potentially unaligned addresses, on x86 at least. David mentioned
the HAVE_EFFICIENT_UNALIGNED_ACCESS test to handle this on all
arches that have efficient unailgned accesses.
I tried this idea and got nice assembly on 32 bits:
158: 33 82 38 01 00 00 xor 0x138(%edx),%eax
15e: 33 8a 34 01 00 00 xor 0x134(%edx),%ecx
164: c1 e0 10 shl $0x10,%eax
167: 09 c1 or %eax,%ecx
169: 74 0b je 176 <eth_type_trans+0x87>
And very nice assembly on 64 bits of course (one xor, one shl)
Nice oprofile improvement in eth_type_trans(), 0.17 % instead of 0.41 %,
expected since we remove 8 instructions on a fast path.
This patch implements a compare_ether_addr_64bits() function, that
uses the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS ifdef to efficiently
perform the 6 bytes comparison on all capable arches.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4e4fd4e485 ("ne2k: convert to
net_device_ops") exported some ei_* symbols from the 8390 library,
but the axnet_cs driver defines local static versions of the same
functions.
Rename them to avoid the namespace conflict.
Reported by Stephen Rothwell.
Signed-off-by: David S. Miller <davem@davemloft.net>
The rule of calling sock_prot_inuse_add() is that BHs must
be disabled. Some new calls were added where this was not
true and this tiggers warnings as reported by Ilpo.
Fix this by adding explicit BH disabling around those call sites.
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the last step to be able to perform full RCU lookups
in __inet_lookup() : After established/timewait tables, we
add RCU lookups to listening hash table.
The only trick here is that a socket of a given type (TCP ipv4,
TCP ipv6, ...) can now flight between two different tables
(established and listening) during a RCU grace period, so we
must use different 'nulls' end-of-chain values for two tables.
We define a large value :
#define LISTENING_NULLS_BASE (1U << 29)
So that slots in listening table are guaranteed to have different
end-of-chain values than slots in established table. A reader can
still detect it finished its lookup in the right chain.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch extends existing code:
* Confirm options divide into the confirmed value plus an optional preference
list for SP values. Previously only the preference list was echoed for SP
values, now the confirmed value is added as per RFC 4340, 6.1;
* length and sanity checks are added to avoid illegal memory (or NULL) access.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support for Mandatory options is provided by this patch, which will
be used by subsequent feature-negotiation patches.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This extends the scope of two available functions,
encode|decode_value_var, to work up to 6 (8) bytes, to match maximum
requirements in the RFC.
These functions are going to be used both by general option processing
and feature negotiation code, hence declarations have been put into
feat.h.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides function to query the current TX/RX CCID dynamically,
without reliance on the minisock value, using dynamic information
available in the currently loaded CCID module.
This query function is then used to
(a) provide the getsockopt part for getting/setting CCIDs via sockopts;
(b) replace the current test for "which CCID is in use" in probe.c.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
With this patch, TX/RX CCIDs can now be changed on a per-connection
basis, which overrides the defaults set by the global sysctl variables
for TX/RX CCIDs.
To make full use of this facility, the remaining patches of this patch
set are needed, which track dependencies and activate negotiated
feature values.
Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to have relevant information for NETLINK protocol, in
/proc/net/protocols, we should use sock_prot_inuse_add() to
update a (percpu and pernamespace) counter of inuse sockets.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Use eq_net() in inet_netns_ok() to speedup socket creation if
!CONFIG_NET_NS
2) Reorder the tests about inet_ehash_secret generation (once only)
Use the unlikely() macro when testing if inet_ehash_secret already
generated.
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the igb driver is experiencing a panic due to a null function
pointer being used during the cleanup of the ethtool looback test on
fiber/serdes parts. This patch prevents that and adds a check prior to
calling any phy function.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clarrify reading PBA has no side-effect (clearing).
Add missing GPL license text.
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add driver/firmware compatibility check.
Update firmware notify cmd to honor notify area size.
Add new version of init cmd.
Add link_down_cnt to notify area to track link down count.
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable ethtool support for get/set_flags so LRO can be turned on/off
by fwding drivers such as the bridge driver. LRO is not compatible
with fwding drivers.
Signed-off-by: Scott Feldman <scofeldm@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
