2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Commit Graph

152 Commits

Author SHA1 Message Date
Greg Kroah-Hartman
e8014d83f6 Merge 5.7-rc3 into staging-next
We need the staging fixes in here too, and this resolves a merge issue
with the vt6656 driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 12:20:40 +02:00
Greg Kroah-Hartman
4e1d96306d First set of new IIO device support, features and cleanup for the 5.8 cycle
Usual mix of new drivers, new support in old drivers and lots of minor
 cleanup. Yaml conversions also continue to trickle in (plenty more to go!)
 
 New device support
 * ad7476
   - Add ad7091 support (ID only)
 * ad9467
   - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
 * adi-axi-adc
   - New driver to support ADIs generic AXI ADC IP core, used to provide
     high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
     paired with a device using a slow configuration interface (spi etc)
     Includes DT bindings and some fixes for fpga headers.
 * bmg160
   - Add support for BMI088 (ID only)
 * max1241
   - New driver for this ADC.
 * st_sensors
   - Add support for LIS2HH12 accelerometer
 * sx9310
   - New driver supporting sx9310 and sx9311 proximity sensors.
 
 Yaml DT binding conversions
 * rockchip-saradc (including adding some missing parts)
 * stm32-dac
 * tsl2563
 * vcnl4000
 
 Features
 * st_lsm6dsx
   - Add LIS3MDL as a possible sensor hub device.
 * vcnl4000
   - Add new concept of near level (from DT) to provide to userspace which
     often needs to have some calibrated concept of 'near'.
 
 Cleanups, minor fixes etc.
 * core
   - Use snprintf for functions where strings are built and there is
     potential for overflow.
   - Correct docs to indicate mlock should not be used directly by drivers.
   - Fix up accidental dropping of a patch to use bitmap_zalloc.
   - Stop allowing enabling of buffers with no channels enabled.
   - Drop unused 'stufftoread' from iio_buffer.
   - Drop scan_el_attrs form iio_buffer as unused.
   - Reorder sanity checks in __iio_device_register to fail earlier.
   - Drop all the devm_ runregister / free functions from IIO as they
     were never used and encourage poor design.
 * dma-buffer
   - Tidy up includes.
 * dma-engine-buffer
   - Provide dev-managed allocator.
   - Fix an issue with printing a size_t
 * cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
   - Replace some unnecessary casts of error ptrs and whilst there.
     use the %pe printf parameter to print them in a more useful fashion.
 * cross subsystem
   - Drop casts in calls to regmap_bulk_read as they make no sense.
   - Use devm_platform_ioremap_resource to reduce boilerplate.
   - Fix typos in Analog Devices.
 * counters/104-quad
   - Add Syed Nayyar Waris as an additional maintainer.
 * ad7476
   - Generate CONVST signal internally rather than requiring external
     trigger.  Add sysfs read back as can now do so.
   - use devm_add_action_or_reset to tidy up error and remove handling.
 * ad7793
   - Switch to read_avail from explicit attribute. Mostly done to avoid
     confusing people with a - sign (without surounding spaces) that
     was correct but checkpatch didn't like.
 * adis library
   - Add missing newlines at end of error messages.
 * adis16400
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * adis16460
   - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
 * ad_sigma_delta
   - Move some channel definitions into individual drivers to avoid
     having to deal with complex options.
 * ak8974
   - Silence an error on deffered probe.
 * bmp280
   - Harden against IRQ before registration.
   - Convert to read_avail instead of opencoding the equivalent.
   - Explicitly mark GPIO as optional.
   - Cleanup casts.
   - Remove line breaks from strings.
 * htts221
   - Replace direct access to platform_data with dev_get_platdata().
   - Use device properties rather than device tree ones to allow ACPI
     probing.
   - Casting cleanups.
 * intel_mrfld_adc
   - Don't use unaligned accessor for aligned data.
 * isl29125
   - Reorder buer pre and post hooks to allow for coming core rework.
 * ltc2983
   - Remove comp to bool.
 * max1363
   - Stop using mlock from the iio_dev directly in favour of a local lock
     with clearly defined scope.
 * max30100
   - Use generic device properties to allow ACPI probe.
 * mpu6050
   - Convert to i2c_new_client_device.
   - Add debugfs register access.
 * st_lsm6dsx
   - Provide means of configuring full scale on slave device if supported.
   - Drop include of st_sensors header to get one value. Its not otherwise
     used by this driver.
 * st-sensors
   - Replace direct access to platform_data with dev_get_platdata().
   - Casting cleanups.
   - Avoid splitting strings.
 * st_uvis25
   - Casting cleanups.
 * tsl2563
   - Typo fix.
 * tsl2772
   - scnprintf in a non obvious string building usecase. Note also 'fixes'
     a wrong calculation of remaining space that couldn't actually cause
     any trouble as there was lots of room.
 * xilinx-xadc
   - Fix Lars-Peter spelling his own name wrong :) + additional typos.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6gicARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj3ig//XRAAHRSfzXFpvYxITVKDIGwP/giYdp91
 OflGw/0aOZFExr72ENLmCArXZPOT2qAZyNNoDNvuJ9SkcVDf4bT3w9gYwWtJ1sd7
 Hhh+1JpPspSo6vS85FMjm37UDfSbmYqB6wC57cZ5pKQIiJwi6W2hGsyOoOXmfLLc
 57d3mlg4g3KLl9Hl4UTU84gE1ushKQgNxVH21Y71pOTa8p+xbWWcspWjR2Jf+kVZ
 qPr2+2rP/AjeAVLu9SKfdBiczYQCNR3uFWKkOKsBE9fq3sbcN6NT5DktrSJUH+qU
 zfUGmShCEP908/9fARazXQZcTOX1tIUOnrpHG9l54GNPh3S2Qk9xGaZxvQy5sguC
 AmC4p+MaIMrMcgWMk9po+nE5INJq7HBV/0jnADG307wEhFrKrjh/2PtP4f9k/Mcv
 sHB7K1+dcJAUwFb5gccdDBfmKMnwfnGS8OFGLXZZKBIDqSvptmIs/pmavjEPgqhV
 GwGTDPyZKeyDnyhTXGafxii03Q2I62Zte5l4jcZ+q8Q4UMxQovEkX6IvUpXwA0Kk
 eoxedbgdvzxrDNiNrXa0k6CLzqSQW+aVHgJG+HEig4IXQse8zXb11HCs35zq5r4j
 JI2UjLk3zUHLiNR/Ir9fKAbPwWSWv3IWkfmFEEUWvUFjM+Xot1Hg+61vBTFKo4iK
 EIqqPZmd5Mk=
 =DyTF
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new IIO device support, features and cleanup for the 5.8 cycle

Usual mix of new drivers, new support in old drivers and lots of minor
cleanup. Yaml conversions also continue to trickle in (plenty more to go!)

New device support
* ad7476
  - Add ad7091 support (ID only)
* ad9467
  - New driver for this 200/250 MSPS adi-axi-adc and SPI attached ADC.
* adi-axi-adc
  - New driver to support ADIs generic AXI ADC IP core, used to provide
    high speed interfaces to ADCs (JESD204B/C or parallel interfaces). Usually
    paired with a device using a slow configuration interface (spi etc)
    Includes DT bindings and some fixes for fpga headers.
* bmg160
  - Add support for BMI088 (ID only)
* max1241
  - New driver for this ADC.
* st_sensors
  - Add support for LIS2HH12 accelerometer
* sx9310
  - New driver supporting sx9310 and sx9311 proximity sensors.

Yaml DT binding conversions
* rockchip-saradc (including adding some missing parts)
* stm32-dac
* tsl2563
* vcnl4000

Features
* st_lsm6dsx
  - Add LIS3MDL as a possible sensor hub device.
* vcnl4000
  - Add new concept of near level (from DT) to provide to userspace which
    often needs to have some calibrated concept of 'near'.

Cleanups, minor fixes etc.
* core
  - Use snprintf for functions where strings are built and there is
    potential for overflow.
  - Correct docs to indicate mlock should not be used directly by drivers.
  - Fix up accidental dropping of a patch to use bitmap_zalloc.
  - Stop allowing enabling of buffers with no channels enabled.
  - Drop unused 'stufftoread' from iio_buffer.
  - Drop scan_el_attrs form iio_buffer as unused.
  - Reorder sanity checks in __iio_device_register to fail earlier.
  - Drop all the devm_ runregister / free functions from IIO as they
    were never used and encourage poor design.
* dma-buffer
  - Tidy up includes.
* dma-engine-buffer
  - Provide dev-managed allocator.
  - Fix an issue with printing a size_t
* cross subsystem (kxsd9, bmg160, mpu3050, bmi160, mpu6050, bmc150)
  - Replace some unnecessary casts of error ptrs and whilst there.
    use the %pe printf parameter to print them in a more useful fashion.
* cross subsystem
  - Drop casts in calls to regmap_bulk_read as they make no sense.
  - Use devm_platform_ioremap_resource to reduce boilerplate.
  - Fix typos in Analog Devices.
* counters/104-quad
  - Add Syed Nayyar Waris as an additional maintainer.
* ad7476
  - Generate CONVST signal internally rather than requiring external
    trigger.  Add sysfs read back as can now do so.
  - use devm_add_action_or_reset to tidy up error and remove handling.
* ad7793
  - Switch to read_avail from explicit attribute. Mostly done to avoid
    confusing people with a - sign (without surounding spaces) that
    was correct but checkpatch didn't like.
* adis library
  - Add missing newlines at end of error messages.
* adis16400
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* adis16460
  - Use DEFINE_DEBUGS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTR.
* ad_sigma_delta
  - Move some channel definitions into individual drivers to avoid
    having to deal with complex options.
* ak8974
  - Silence an error on deffered probe.
* bmp280
  - Harden against IRQ before registration.
  - Convert to read_avail instead of opencoding the equivalent.
  - Explicitly mark GPIO as optional.
  - Cleanup casts.
  - Remove line breaks from strings.
* htts221
  - Replace direct access to platform_data with dev_get_platdata().
  - Use device properties rather than device tree ones to allow ACPI
    probing.
  - Casting cleanups.
* intel_mrfld_adc
  - Don't use unaligned accessor for aligned data.
* isl29125
  - Reorder buer pre and post hooks to allow for coming core rework.
* ltc2983
  - Remove comp to bool.
* max1363
  - Stop using mlock from the iio_dev directly in favour of a local lock
    with clearly defined scope.
* max30100
  - Use generic device properties to allow ACPI probe.
* mpu6050
  - Convert to i2c_new_client_device.
  - Add debugfs register access.
* st_lsm6dsx
  - Provide means of configuring full scale on slave device if supported.
  - Drop include of st_sensors header to get one value. Its not otherwise
    used by this driver.
* st-sensors
  - Replace direct access to platform_data with dev_get_platdata().
  - Casting cleanups.
  - Avoid splitting strings.
* st_uvis25
  - Casting cleanups.
* tsl2563
  - Typo fix.
* tsl2772
  - scnprintf in a non obvious string building usecase. Note also 'fixes'
    a wrong calculation of remaining space that couldn't actually cause
    any trouble as there was lots of room.
* xilinx-xadc
  - Fix Lars-Peter spelling his own name wrong :) + additional typos.

* tag 'iio-for-5.8a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (101 commits)
  iio: magnetometer: ak8974: Silence deferred-probe error
  Documentation: ABI: document IIO in_proximity_nearlevel file
  iio: vcnl4000: Export near level property for proximity sensor
  dt-bindings: iio: light: vcnl4000: Add proximity-near-level
  dt-bindings: iio: Introduce common properties for iio sensors
  dt-bindings: iio: vcnl4000: convert bindings to YAML format
  iio: Fix misspellings of "Analog Devices"
  iio: light: isl29125: fix iio_triggered_buffer_{predisable,postenable} positions
  iio: adc: fsl-imx25-gcq: Use devm_platform_ioremap_resource
  iio: adc: at91-adc: Use devm_platform_ioremap_resource
  iio: adc: sun4i-gpadc-iio: Use devm_platform_ioremap_resource
  iio:light:ltr501: Drop unnecessary cast of parameter in regmap_bulk_read
  iio:magn:mmc35240: Drop unnecessary casts of val parameter in regmap_bulk*
  iio:imu:mpu6050: Tidy up parameters to regmap_bulk functions.
  iio:chemical:bme680: Tidy up parameters to regmap_bulk_read
  iio:chemical:atlas-sensor: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio:accel:mxc4005: Drop unnecessary explicit casts in regmap_bulk_read calls
  iio: imu: st_lsm6dsx: drop huge include in sensor-hub driver
  iio: buffer: drop devm_iio_kfifo_free() API call
  iio: buffer: drop devm_iio_hw_consumer_free() API call
  ...
2020-04-23 11:06:48 +02:00
Greg Kroah-Hartman
c532cc617e First set of IIO fixes for the 5.7 cycle.
Includes one MAINTAINERS update to avoid people getting a lot of bounce
 messages and complaining about it.
 
 * MAINTAINERS
   - Drop Stefan Popa's Analog Devices email address in favour of
     Michael Hennerich.
 * core
   - Fix handling of dB sysfs inputs.
   - Drop a stray semi colon in macro definition.
 * ad5770r
   - Fix an off by one in chec on maximum number of channels.
 * ad7192
   - Fix a null pointer de-reference due to the name previously being
     retrieved from the spi_get_device_id call which no longer works as
     the relevant table was removed.
 * ad7797
   - Use correct attribute group.
 * counter/104-quad-8
   - Add locks to prevent some race conditions.
 * inv-mpu6050
   - Fix issues around suspend / resume clashing with runtime PM.
 * stm32-adc
   - Fix sleep in invalid context
   - Fix id relative path error in device tree binding doc.
 * st_lsm6dsx
   - Fix a read alignment issue on an untagged FIFO.
   - Handle odr for slave to properly compute the FIFO data layout / pattern.
   - Flush the HW FIFO before resettting the device to avoid a race on
     interrupt line 1.
 * st_sensors
   - Rely on ODR mask not ODR address to identify if the ODR can be set.
     Some devices have an ODR address of 0.
 * ti-ads8344
   - Byte ordering was wrong - fix it.
 * xilinx-xadc
   - Fix inverted logic in powering down the second ADC.
   - Fix clearing interrupt when enabling the trigger.
   - Fix configuration of sequencer when in simultaneous sampling mode.
   - Limit initial sampling rate as done for runtime configured ones.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6cgbkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj/qg//c1TF2fhXEuGNua2M9PzaO+UgEkymF5lD
 R9bQPOPLXesTxmIZDIPWuIYaoFOIBrB6Kc9DvE8+7apVc0I/JFYmuXSjY1LGoBj5
 6WSrbtfAHYD5HBY/ZQq92iw+feFlctWtpp7H6Ngy2c7lQy8OKMhrHOA1NgbC++HH
 5OA5uoMD7Fo0mvAGY7/74DiJFEKG/PUUrGWSbH792Mh0EmvXgyFkWyHEXCUrS6Qo
 gbaLk8mZsTac3iwYoLk7AdYyQpEdQD/tnCHpBzHHdTdDcQuKHbknP9t/zFuEkM/e
 hAH6H/cOr+IMOkMvYe1HDRQsOwkPQppz2GnxtWAUwCV8Shkn7khOExnV17zqUfJx
 NSzX60/iZWj53cAJkp4ZW4Uf6dqEEeCvV9jzWngXsCTRz96tpwJoLDilTEStSp1r
 0d17OpFSkrPoJQR6miK+wCeoA4CcLLfGJXG1BcDpsT0qgHq/TNx7P7AX55Ip//IL
 uu7qCDzFHAct8C50r1725pthsX/69PI34F8wHQ+bSt8eBlEMc/+iDavXO7MPvNNi
 Xd/Je0c+6pV15X9lCN7RqujDjBb2yMzX9f3Omq0txc4ughYGYb3QLwAfBidjW6Wy
 fI6AgBXOdqUOlFgq0ncDUVmS73AMfb2ilvstfY+cfhLrtGIzZNwin1znSIxcesaS
 tUGD9Xk/bPc=
 =SmJy
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.7 cycle.

Includes one MAINTAINERS update to avoid people getting a lot of bounce
messages and complaining about it.

* MAINTAINERS
  - Drop Stefan Popa's Analog Devices email address in favour of
    Michael Hennerich.
* core
  - Fix handling of dB sysfs inputs.
  - Drop a stray semi colon in macro definition.
* ad5770r
  - Fix an off by one in chec on maximum number of channels.
* ad7192
  - Fix a null pointer de-reference due to the name previously being
    retrieved from the spi_get_device_id call which no longer works as
    the relevant table was removed.
* ad7797
  - Use correct attribute group.
* counter/104-quad-8
  - Add locks to prevent some race conditions.
* inv-mpu6050
  - Fix issues around suspend / resume clashing with runtime PM.
* stm32-adc
  - Fix sleep in invalid context
  - Fix id relative path error in device tree binding doc.
* st_lsm6dsx
  - Fix a read alignment issue on an untagged FIFO.
  - Handle odr for slave to properly compute the FIFO data layout / pattern.
  - Flush the HW FIFO before resettting the device to avoid a race on
    interrupt line 1.
* st_sensors
  - Rely on ODR mask not ODR address to identify if the ODR can be set.
    Some devices have an ODR address of 0.
* ti-ads8344
  - Byte ordering was wrong - fix it.
* xilinx-xadc
  - Fix inverted logic in powering down the second ADC.
  - Fix clearing interrupt when enabling the trigger.
  - Fix configuration of sequencer when in simultaneous sampling mode.
  - Limit initial sampling rate as done for runtime configured ones.

* tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  MAINTAINERS: remove Stefan Popa's email
  iio: adc: ad7192: fix null pointer de-reference crash during probe
  iio: core: remove extra semi-colon from devm_iio_device_register() macro
  iio: adc: ti-ads8344: properly byte swap value
  iio: imu: inv_mpu6050: fix suspend/resume with runtime power
  iio: st_sensors: rely on odr mask to know if odr can be set
  iio: xilinx-xadc: Make sure not exceed maximum samplerate
  iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
  iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
  iio: xilinx-xadc: Fix ADC-B powerdown
  iio: dac: ad5770r: fix off-by-one check on maximum number of channels
  iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
  iio: core: Fix handling of 'dB'
  dt-bindings: iio: adc: stm32-adc: fix id relative path
  counter: 104-quad-8: Add lock guards - generic interface
  iio: imu: st_lsm6dsx: specify slave odr in slv_odr
  iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO
  iio: adc: stm32-adc: fix sleep in atomic context
  iio:ad7797: Use correct attribute_group
2020-04-20 14:07:00 +02:00
Mircea Caprioru
5403f28076 iio: core: Fix handling of 'dB'
This patch fixes the call to iio_str_to_fixpoint when using 'dB' sufix.
Before this the scale_db was not used when parsing the string written to
the attribute and it failed with invalid value.

Fixes: b852822474 ("iio: core: Handle 'dB' suffix in core")
Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19 17:50:01 +01:00
Alexandru Ardelean
66be392a48 iio: core: drop devm_iio_device_free() API call
It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

This is the last user of 'devm_iio_device_match()', so it can be removed as
well in this patch.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19 16:56:36 +01:00
Alexandru Ardelean
83af573e98 iio: core: drop devm_iio_device_unregister() API call
It's unused so far, so it can be removed. Also makes sense to remove it
to discourage weird uses of this call during review.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19 16:56:35 +01:00
Alexandru Ardelean
a17cb784fc iio: move 'indio_dev->info' null check first in __iio_device_register()
Moves this to be the first check, as it's very simple and fails the
registration earlier, instead of potentially initializing the
'indio_dev->label' and checking for duplicate indexes, and then failing
with this simple-check.

This is a minor optimization, since '__iio_device_register()' will waste
fewer validation cycles in case 'indio_dev->info' is NULL.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-19 16:56:34 +01:00
Linus Torvalds
413a103cf6 chrome platform changes for 5.7
* cros-usbpd-notify and cros_ec_typec
 - Add a new notification driver that handles and dispatches USB PD
  related events to other drivers.
 - Add a Type C connector class driver for cros_ec
 
 * CrOS EC
 - Introduce a new cros_ec_cmd_xfer_status helper
 
 * Sensors/iio:
 - A series from Gwendal that adds Cros EC sensor hub FIFO support
 
 * Wilco EC
 - Fix a build warning.
 - Platform data shouldn't include kernel.h
 
 * Misc
 - i2c api conversion complete, with i2c_new_client_device instead of
  i2c_new_device in chromeos_laptop.
 - Replace zero-length array with flexible-array member in cros_ec_chardev
  and wilco_ec
 - Update new structure for SPI transfer delays in cros_ec_spi
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCXo1lfQAKCRBzbaomhzOw
 wo6TAQCKHOcrqq5Y9HYXs1QBx8e/0vVwe5Jh76Qi6hUVqXu56QEA65lBZ2ni8Udp
 f6jQDFkaeYaF2tkghvuNoAkFRI6/rAk=
 =j4Tt
 -----END PGP SIGNATURE-----

Merge tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Benson Leung:

  cros-usbpd-notify and cros_ec_typec:
   - Add a new notification driver that handles and dispatches USB PD
     related events to other drivers.
   - Add a Type C connector class driver for cros_ec

  CrOS EC:
   - Introduce a new cros_ec_cmd_xfer_status helper

  Sensors/iio:
   - A series from Gwendal that adds Cros EC sensor hub FIFO support

  Wilco EC:
   - Fix a build warning.
   - Platform data shouldn't include kernel.h

  Misc:
   - i2c api conversion complete, with i2c_new_client_device instead of
     i2c_new_device in chromeos_laptop.
   - Replace zero-length array with flexible-array member in
     cros_ec_chardev and wilco_ec
   - Update new structure for SPI transfer delays in cros_ec_spi

* tag 'tag-chrome-platform-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: (34 commits)
  platform/chrome: cros_ec_spi: Wait for USECS, not NSECS
  iio: cros_ec: Use Hertz as unit for sampling frequency
  iio: cros_ec: Report hwfifo_watermark_max
  iio: cros_ec: Expose hwfifo_timeout
  iio: cros_ec: Remove pm function
  iio: cros_ec: Register to cros_ec_sensorhub when EC supports FIFO
  iio: expose iio_device_set_clock
  iio: cros_ec: Move function description to .c file
  platform/chrome: cros_ec_sensorhub: Add median filter
  platform/chrome: cros_ec_sensorhub: Add code to spread timestmap
  platform/chrome: cros_ec_sensorhub: Add FIFO support
  platform/chrome: cros_ec_sensorhub: Add the number of sensors in sensorhub
  platform/chrome: chromeos_laptop: make I2C API conversion complete
  platform/chrome: wilco_ec: event: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_chardev: Replace zero-length array with flexible-array member
  platform/chrome: cros_ec_typec: Update port info from EC
  platform/chrome: Add Type C connector class driver
  platform/chrome: cros_usbpd_notify: Pull PD_HOST_EVENT status
  platform/chrome: cros_usbpd_notify: Amend ACPI driver to plat
  platform/chrome: cros_usbpd_notify: Add driver data struct
  ...
2020-04-08 21:25:49 -07:00
Gwendal Grignou
69f0793eb6 iio: expose iio_device_set_clock
Some IIO devices may want to override the default (realtime) to another
clock source by default.

It can beneficial when timestamps coming from the hardware or underlying
drivers are already in that format.

It can always be overridden by attribute current_timestamp_clock.

Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
2020-03-28 22:04:32 +01:00
Takashi Iwai
35a4eeb055 iio: core: Use scnprintf() for avoiding potential buffer overflow
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit.  Fix it by replacing with scnprintf().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-21 10:25:45 +00:00
Alexandru Tachici
2ddc982a6c iio: industrialio-core: Fix debugfs read
Currently iio_debugfs_read_reg calls debugfs_reg_access
every time it is ran. Reading the same hardware register
multiple times during the same reading of a debugfs file
can cause unintended effects.

For example for each: cat iio:device0/direct_reg_access
the file_operations.read function will be called at least
twice. First will return the full length of the string in
bytes  and the second will return 0.

This patch makes iio_debugfs_read_reg to call debugfs_reg_access
only when the user's buffer position (*ppos) is 0. (meaning
it is the beginning of a new reading of the debugfs file).

Fixes: e553f182d5 ("staging: iio: core: Introduce debugfs support, add support for direct register access")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08 17:28:51 +00:00
Beniamin Bia
b852822474 iio: core: Handle 'dB' suffix in core
This patch handles the db suffix used for writing micro db values.

Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-21 10:02:16 +00:00
Greg Kroah-Hartman
821f7ce79f First set of new device support, features and cleanups for IIO in the 5.6 cycle
New device support
 
 * ad7091r5 ADC
   - New driver with follow up patch adding scale and vref support.
   - DT bindings
 * ad7923
   - Support for ad7908, ad7918 and ad7928 added to driver.
 * bma180
   - Support the BMA254 accelerometer. Required fairly substantial rework
     to allow for small differences between this an existing parts.
 * bma400 accelerometer
   - New driver with follow up patch for regulator support.
   - DT bindings.
 * asc dlhl60d
   - New driver support this range of pressure and temperature sensors.
   - DT bindings.
 * ltc2496 ADC
   - New driver to support this ADC.
   - Split the existing LTC2497 driver generic component out and reuse.
   - DT bindings.
 * parallax ping
   - New driver supporting ultrasonic and laser tof distance sensors.
   - Bindings for these sensors.
 
 New features
 
 * core
   - New char type for read_raw returns, used for thermocouple types.
   - Rename read_first_n callback to read.   The reasons behind the original
     naming are lost to the mists of time.
 * ad799x
   - Allow pm_ops to disable device completely allowing regulator power down.
 * bma180
   - Enable basic regulator support.
 * dmaengine buffer
   - Report platform data alignment requirements via new ABI.
 * max31856
   - Add option to set mains filter rejection frequency and document
     new in_temp_filter_notch_center_frequency ABI.
   - Add support for configuring HW averaging (oversampling ratio)
   - Add runtime configuration of thermocouple type and document new ABI.
 * maxim-thermocouple
   - Add read only access to thermocouple type using new ABI, includes
     adding more specific compatibles to reflect which variant of the
     chip is being used.
 * mpu6050
   - Provide option to support the PMU9150 in package magnetometer directly
     rather than via auxiliary bus.
 * stm32_adc
   - Add overrun interrupt checks to detect if this happens.
 * st_lsm6dsx
   - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
     allow this.
 
 Cleanups and minor fixes
 
 * Subsystem wide
   - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
   - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
 * ad7266
   - Convert to GPIO descriptors.
 * ad7303
   - Avoid a dance with checking if the regulator is supplied by just
     using the optional request interface.
 * ad7887
   - Simplify channel specification assignment to enable adding more devices.
 * ad7923
   - Drop some unused and largely pointless defines of BOB_N==N variety.
   - Tidy up checkpatch warnings.
   - Add missing of_device_id table.
 * adf4350
   - Convert to GPIO descriptors.
 * ak8975
   - Convert to GPIO descriptors.
 * ADIS library and drivers
   - Expand scope of txrx_lock to cover all state and rename as state_lock
   - Add unlocked read / write to allow grouping of consecutive calls under
     single lock / unlock.
   - Add unlocked check_status, reset to allow grouping under single
     lock / unlock.
   - Remove remaining uses of core mlock for local state protection.
     mlock should never be used directly as it protects tightly defined
     core IIO device management state.
 * adis16240
   - Enforce only supported SPI mode on driver load + add DT binding doc.
 * atlas-ph-sensor
   - Rename to atlas-sensor given it now covers things beyond ph sensors.
 * bma180
   - Use local dev variable to tidy up code.
   - Use c99 style explicity .member assignment to make driver more readable.
 * bmp280
   - Drop ACPI support. No evidence this was used and appropriate ID is not
     registered.
   - Allow ACPI to bind device via PRP0001
 * dmaengine buffer
   - Use dma_request_chan instead of dma_request_slave_channel_reason as that
     ABI is going away.
   - Add module info to avoid tainting the kernel.
 * hts221
   - Avoid magic number defines when only used to fill structure elements
     that are self describing.
 * lm3533
   - Drop a stray semicolon.
 * max9611
   - Cleanup enum handling to be more resilient to future changes.
 * mpu6050
   - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
   - Select I2C_MUX again after kbuild issue fixed elsewhere.
 * stm32-timer
   - Drop an unnecessary register update.
 * ssp_sensors
   - Convert to GPIO descriptors.
 * st_sensors
   - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
     anyway.
   - Make default platform data structures __maybe_unsued.
   - Fill in some missing kernel-doc function parameters.
 * st_lsm6dsx
   - white space fixes.
   - Mark some constants that aren't always used as __maybe_unused.
   - Drop of ID table guards as they just pervent use under ACPI.
   - Switch to device properties to allow ACPI usage.
 * st_uvis25
   - Drop acpi.h include as no ACPI APIs used.
 * ti-ads1015
   - Drop legacy platform data as no one seems to be using it.
   - Use the device property API instead of OF specific.
 * ti-ads7950
   - typo fix in error message.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl4R2mwRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Fogfow//Rfsrd2oiAwy4ypm70ZWGnr84C3O/Vpic
 Agwdd2/lHiCA2Gjg+n7ZT6XkKQmKiojuBMT05PuskEm5onJVQuSAKMVppXwU6UDP
 uOUS5MAbo87GLogzXJnAR/eCrx/VkC4UqFRBSi7IUIj+lTpjiOhmoqm78VTMxkgT
 hvp5PVN/mLNxNV3eVrR9uILjZLpbBjKjWil00IS2zj0o78sGtd2QtMIdTbn3iBLp
 m0ngCDww1KDH+idwbOIn8YX8GSK8mTjNV5q4r9+xnjoAk8RPk+H317idyRHCKfCM
 wWFSFB6u/oqtHXRgQVi3ndRrZnPLTycA/R20f3ezzhVYZzf3RpH8Upcx0lqqCmrB
 +ZTbYW1L7KL6zCSR4ZYIEmw2TeQngfCGy0yDoEDXm9V8/B2nGWFc3Iknq+fK415V
 7OgJCWAw6ybF2LZfJHpcuJTb0EPxCKnInHbRsaxCsSAPRyERSdAz8RLn3lpH/k2D
 X32Q9hz/6sXKzIAD1Y0jv8ll28D5S7d2FgaWufy1tpB+CMb0Mp0RQn+Ho8lNMh70
 Zh9SF8RvknAiCT9iHeVIdbJxoYEtMuCaDwScliukVcg12gVViY5VzXMbSV/4jCnZ
 bAVZDpcM3LVLxCGbWqCNxjQ9wle99LsVHRld/KDpOfI6VIYDb8Y900Nf6efkQkAs
 a6z6rhpVdDg=
 =8FmM
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.6 cycle

New device support

* ad7091r5 ADC
  - New driver with follow up patch adding scale and vref support.
  - DT bindings
* ad7923
  - Support for ad7908, ad7918 and ad7928 added to driver.
* bma180
  - Support the BMA254 accelerometer. Required fairly substantial rework
    to allow for small differences between this an existing parts.
* bma400 accelerometer
  - New driver with follow up patch for regulator support.
  - DT bindings.
* asc dlhl60d
  - New driver support this range of pressure and temperature sensors.
  - DT bindings.
* ltc2496 ADC
  - New driver to support this ADC.
  - Split the existing LTC2497 driver generic component out and reuse.
  - DT bindings.
* parallax ping
  - New driver supporting ultrasonic and laser tof distance sensors.
  - Bindings for these sensors.

New features

* core
  - New char type for read_raw returns, used for thermocouple types.
  - Rename read_first_n callback to read.   The reasons behind the original
    naming are lost to the mists of time.
* ad799x
  - Allow pm_ops to disable device completely allowing regulator power down.
* bma180
  - Enable basic regulator support.
* dmaengine buffer
  - Report platform data alignment requirements via new ABI.
* max31856
  - Add option to set mains filter rejection frequency and document
    new in_temp_filter_notch_center_frequency ABI.
  - Add support for configuring HW averaging (oversampling ratio)
  - Add runtime configuration of thermocouple type and document new ABI.
* maxim-thermocouple
  - Add read only access to thermocouple type using new ABI, includes
    adding more specific compatibles to reflect which variant of the
    chip is being used.
* mpu6050
  - Provide option to support the PMU9150 in package magnetometer directly
    rather than via auxiliary bus.
* stm32_adc
  - Add overrun interrupt checks to detect if this happens.
* st_lsm6dsx
  - Enable the sensor-hub support for lsm6dsm. Includes various reworks to
    allow this.

Cleanups and minor fixes

* Subsystem wide
  - Tidy up indentation in Kconfig and fix alphabetical order of AD7091R5.
  - Drop linux/gpio.h and linux/of_gpio.h from drivers that don't use them.
* ad7266
  - Convert to GPIO descriptors.
* ad7303
  - Avoid a dance with checking if the regulator is supplied by just
    using the optional request interface.
* ad7887
  - Simplify channel specification assignment to enable adding more devices.
* ad7923
  - Drop some unused and largely pointless defines of BOB_N==N variety.
  - Tidy up checkpatch warnings.
  - Add missing of_device_id table.
* adf4350
  - Convert to GPIO descriptors.
* ak8975
  - Convert to GPIO descriptors.
* ADIS library and drivers
  - Expand scope of txrx_lock to cover all state and rename as state_lock
  - Add unlocked read / write to allow grouping of consecutive calls under
    single lock / unlock.
  - Add unlocked check_status, reset to allow grouping under single
    lock / unlock.
  - Remove remaining uses of core mlock for local state protection.
    mlock should never be used directly as it protects tightly defined
    core IIO device management state.
* adis16240
  - Enforce only supported SPI mode on driver load + add DT binding doc.
* atlas-ph-sensor
  - Rename to atlas-sensor given it now covers things beyond ph sensors.
* bma180
  - Use local dev variable to tidy up code.
  - Use c99 style explicity .member assignment to make driver more readable.
* bmp280
  - Drop ACPI support. No evidence this was used and appropriate ID is not
    registered.
  - Allow ACPI to bind device via PRP0001
* dmaengine buffer
  - Use dma_request_chan instead of dma_request_slave_channel_reason as that
    ABI is going away.
  - Add module info to avoid tainting the kernel.
* hts221
  - Avoid magic number defines when only used to fill structure elements
    that are self describing.
* lm3533
  - Drop a stray semicolon.
* max9611
  - Cleanup enum handling to be more resilient to future changes.
* mpu6050
  - Delete MPU9150 from supported SPI devices as doesn't provide SPI.
  - Select I2C_MUX again after kbuild issue fixed elsewhere.
* stm32-timer
  - Drop an unnecessary register update.
* ssp_sensors
  - Convert to GPIO descriptors.
* st_sensors
  - drop !CONFIG_ACPI defines as ACPI_PTR() will stop them being used
    anyway.
  - Make default platform data structures __maybe_unsued.
  - Fill in some missing kernel-doc function parameters.
* st_lsm6dsx
  - white space fixes.
  - Mark some constants that aren't always used as __maybe_unused.
  - Drop of ID table guards as they just pervent use under ACPI.
  - Switch to device properties to allow ACPI usage.
* st_uvis25
  - Drop acpi.h include as no ACPI APIs used.
* ti-ads1015
  - Drop legacy platform data as no one seems to be using it.
  - Use the device property API instead of OF specific.
* ti-ads7950
  - typo fix in error message.

* tag 'iio-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (99 commits)
  iio: accel: bma180: BMA254 support
  iio: pressure: bmp280: Allow device to be enumerated from ACPI
  iio: pressure: bmp280: Drop ACPI support
  dt-bindings: iio: adc: convert sd modulator to json-schema
  iio: buffer: rename 'read_first_n' callback to 'read'
  iio: buffer-dmaengine: Report buffer length requirements
  bindings: iio: pressure: Add documentation for dlh driver
  dt-bindings: Add asc vendor
  iio: pressure: Add driver for DLH pressure sensors
  iio: buffer-dmaengine: Add module information
  iio: accel: bma180: Use explicit member assignment
  iio: accel: bma180: Basic regulator support
  iio: accel: bma180: Add dev helper variable
  iio: imu: st_lsm6dsx: enable sensor-hub support for lsm6dsm
  iio: imu: st_lsm6dsx: rename st_lsm6dsx_shub_read_reg in st_lsm6dsx_shub_read_output
  iio: imu: st_lsm6dsx: check if shub_output reg is located in primary page
  iio: imu: st_lsm6dsx: check if pull_up is located in primary page
  iio: imu: st_lsm6dsx: check if master_enable is located in primary page
  iio: imu: st_lsm6dsx: export max num of slave devices in st_lsm6dsx_shub_settings
  iio: light: remove unneeded semicolon
  ...
2020-01-10 10:44:00 +01:00
Lars-Peter Clausen
f6d4033d2a iio: buffer: rename 'read_first_n' callback to 'read'
It is implied that 'read' will read the first n bytes and not e.g. bytes
only from offsets within the buffer that are a prime number.

This change is non-functional, mostly just a rename.
A secondary intent with this patch is to make room later to add a write
callback.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-12-29 15:20:09 +00:00
Linus Torvalds
0da522107e compat_ioctl: remove most of fs/compat_ioctl.c
As part of the cleanup of some remaining y2038 issues, I came to
 fs/compat_ioctl.c, which still has a couple of commands that need support
 for time64_t.
 
 In completely unrelated work, I spent time on cleaning up parts of this
 file in the past, moving things out into drivers instead.
 
 After Al Viro reviewed an earlier version of this series and did a lot
 more of that cleanup, I decided to try to completely eliminate the rest
 of it and move it all into drivers.
 
 This series incorporates some of Al's work and many patches of my own,
 but in the end stops short of actually removing the last part, which is
 the scsi ioctl handlers. I have patches for those as well, but they need
 more testing or possibly a rewrite.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJdsHCdAAoJEJpsee/mABjZtYkP/1JGl3jFv3Iq/5BCdPkaePP1
 RtMJRNfURgK3GeuHUui330PvVjI/pLWXU/VXMK2MPTASpJLzYz3uCaZrpVWEMpDZ
 +ImzGmgJkITlW1uWU3zOcQhOxTyb1hCZ0Ci+2xn9QAmyOL7prXoXCXDWv3h6iyiF
 lwG+nW+HNtyx41YG+9bRfKNoG0ZJ+nkJ70BV6u0acQHXWn7Xuupa9YUmBL87hxAL
 6dlJfLTJg6q8QSv/Q6LxslfWk2Ti8OOJZOwtFM5R8Bgl0iUcvshiRCKfv/3t9jXD
 dJNvF1uq8z+gracWK49Qsfq5dnZ2ZxHFUo9u0NjbCrxNvWH/sdvhbaUBuJI75seH
 VIznCkdxFhrqitJJ8KmxANxG08u+9zSKjSlxG2SmlA4qFx/AoStoHwQXcogJscNb
 YIXYKmWBvwPzYu09QFAXdHFPmZvp/3HhMWU6o92lvDhsDwzkSGt3XKhCJea4DCaT
 m+oCcoACqSWhMwdbJOEFofSub4bY43s5iaYuKes+c8O261/Dwg6v/pgIVez9mxXm
 TBnvCsotq5m8wbwzv99eFqGeJH8zpDHrXxEtRR5KQqMqjLq/OQVaEzmpHZTEuK7n
 e/V/PAKo2/V63g4k6GApQXDxnjwT+m0aWToWoeEzPYXS6KmtWC91r4bWtslu3rdl
 bN65armTm7bFFR32Avnu
 =lgCl
 -----END PGP SIGNATURE-----

Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann:
 "As part of the cleanup of some remaining y2038 issues, I came to
  fs/compat_ioctl.c, which still has a couple of commands that need
  support for time64_t.

  In completely unrelated work, I spent time on cleaning up parts of
  this file in the past, moving things out into drivers instead.

  After Al Viro reviewed an earlier version of this series and did a lot
  more of that cleanup, I decided to try to completely eliminate the
  rest of it and move it all into drivers.

  This series incorporates some of Al's work and many patches of my own,
  but in the end stops short of actually removing the last part, which
  is the scsi ioctl handlers. I have patches for those as well, but they
  need more testing or possibly a rewrite"

* tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits)
  scsi: sd: enable compat ioctls for sed-opal
  pktcdvd: add compat_ioctl handler
  compat_ioctl: move SG_GET_REQUEST_TABLE handling
  compat_ioctl: ppp: move simple commands into ppp_generic.c
  compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t
  compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic
  compat_ioctl: unify copy-in of ppp filters
  tty: handle compat PPP ioctls
  compat_ioctl: move SIOCOUTQ out of compat_ioctl.c
  compat_ioctl: handle SIOCOUTQNSD
  af_unix: add compat_ioctl support
  compat_ioctl: reimplement SG_IO handling
  compat_ioctl: move WDIOC handling into wdt drivers
  fs: compat_ioctl: move FITRIM emulation into file systems
  gfs2: add compat_ioctl support
  compat_ioctl: remove unused convert_in_user macro
  compat_ioctl: remove last RAID handling code
  compat_ioctl: remove /dev/raw ioctl translation
  compat_ioctl: remove PCI ioctl translation
  compat_ioctl: remove joystick ioctl translation
  ...
2019-12-01 13:46:15 -08:00
Andrea Merello
ddfb97d8f0 iio: core: add thermocouple_type standard attribute
We have a couple of thermocouple IIO drivers, supporting several chips.
Some of them support only one specific thermocouple type (e.g. "K", "J"),
one of them can be configured to work with several different thermocouple
types.

In certain applications thermocouples could be externally connected to the
chip by the user.

This patch introduces a new IIO standard attribute to report the supported
thermocouple type and, where applicable, to allow it to be dynamically set
using sysfs.

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Daniel Gomez <dagmcr@gmail.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-11-23 12:35:19 +00:00
Andrea Merello
8cb3403633 iio: core: add char type for sysfs attributes
This patch introduces IIO_VAL_CHAR type for standard IIO attributes to
allow for attributes that needs to be represented by character rather
than a number. This is preparatory for introducing a new attribute whose
purpose is to describe thermocouple type, that can be i.e. "J", "K", etc..

The char-type value is stored in the first "value" integer that is passed
to the .[read/write]_raw() callbacks.

Note that in order to make it possible for the IIO core to correctly parse
this type (actually, to avoid integer parsing), it became mandatory for
any driver that wish to use IIO_VAL_CHAR on a writable attribute to
implement .write_raw_get_fmt().

Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Patrick Havelange <patrick.havelange@essensium.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: Matt Ranostay <matt.ranostay@konsulko.com>
Cc: Chuhong Yuan <hslester96@gmail.com>
Cc: Daniel Gomez <dagmcr@gmail.com>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-11-23 12:33:07 +00:00
Arnd Bergmann
1832f2d8ff compat_ioctl: move more drivers to compat_ptr_ioctl
The .ioctl and .compat_ioctl file operations have the same prototype so
they can both point to the same function, which works great almost all
the time when all the commands are compatible.

One exception is the s390 architecture, where a compat pointer is only
31 bit wide, and converting it into a 64-bit pointer requires calling
compat_ptr(). Most drivers here will never run in s390, but since we now
have a generic helper for it, it's easy enough to use it consistently.

I double-checked all these drivers to ensure that all ioctl arguments
are used as pointers or are ignored, but are not interpreted as integer
values.

Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-10-23 17:23:44 +02:00
Phil Reid
2c3d0c9ffd iio: core: Add optional symbolic label to device attributes
If a label is defined in the device tree for this device add that
to the device specific attributes. This is useful for userspace to
be able to identify an individual device when multiple identical
chips are present in the system.

Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-07 21:31:18 +01:00
Linus Torvalds
e786741ff1 Staging / IIO driver update for 5.3-rc1
Here is the big Staging and IIO driver update for 5.3-rc1.
 
 Lots of new IIO drivers are in here, along with loads of tiny staging
 driver cleanups and fixes.  Overall we almost break even with the same
 lines added as removed.
 
 Full details are in the shortlog, they are too large to list here.
 
 All of these changes have been in linux-next for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXlWA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ym5lgCgwNVvum2lwWzAVPkVEMqpGYLZPLgAoJqegC9o
 JsdX6tFoAC8q8+FXWgZ4
 =di3h
 -----END PGP SIGNATURE-----

Merge tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging and IIO driver updates from Greg KH:
 "Here is the big Staging and IIO driver update for 5.3-rc1.

  Lots of new IIO drivers are in here, along with loads of tiny staging
  driver cleanups and fixes. Overall we almost break even with the same
  lines added as removed.

  Full details are in the shortlog, they are too large to list here.

  All of these changes have been in linux-next for a while with no
  reported issues"

* tag 'staging-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (608 commits)
  staging: kpc2000: simplify comparison to NULL in fileops.c
  staging: kpc2000: simplify comparison to NULL in dma.c
  staging: kpc2000: simplify comparison to NULL in kpc2000_spi.c
  staging: rtl8723bs: hal: remove redundant assignment to packetType
  staging: rtl8723bs: Change return type of hal_btcoex_IsBtDisabled()
  staging: rtl8723bs: Remove rtw_btcoex_DisplayBtCoexInfo()
  staging: rtl8723bs: Remove function rtw_btcoex_GetDBG()
  staging: rtl8723bs: Remove function rtw_btcoex_SetDBG()
  staging: rtl8723bs: Remove rtw_btcoex_IsBTCoexCtrlAMPDUSize()
  staging: rtl8723bs: Remove rtw_btcoex_BtInfoNotify()
  staging: rtl8723bs: Remove rtw_btcoex_ScanNotify()
  staging: rtl8723bs: Remove rtw_btcoex_SetSingleAntPath()
  staging: rtl8723bs: Remove rtw_btcoex_SetPGAntNum()
  staging: rtl8192e: remove redundant initialization of rtstatus
  staging: rtl8723bs: Remove rtw_btcoex_GetRaMask()
  staging: rtl8723bs: Remove rtw_btcoex_SetChipType()
  staging: rtl8723bs: Remove rtw_btcoex_ConnectNotify()
  staging: rtl8723bs: Remove rtw_btcoex_SetBTCoexist()
  staging: rtl8723bs: Remove rtw_btcoex_IsBtDisabled()
  staging: rtl8723bs: Remove rtw_btcoex_IsBtControlLps()
  ...
2019-07-11 15:36:02 -07:00
Thomas Gleixner
3419240495 Merge branch 'timers/vdso' into timers/core
so the hyper-v clocksource update can be applied.
2019-07-03 10:50:21 +02:00
Greg Kroah-Hartman
c55cc97a25 Second set of IIO device support, features, cleanups and minor fixes for 5.3.
A few bits for the counters subsystem mixed in here as well.
 There are some late breaking fixes as well, which aren't so urgent
 they can't wait for the merge window.
 
 New Device Support
 * adf4371
   - New driver + bindings.
   - Support the adf4372 PLL. Mostly ID and bindings.
 * ad8366 (note includes rework of driver needed to allow support for these).
   - Support the ADL5240 variable gain amplifier (VGA).
   - Support the ADA4961 digital gain amplifier (DGA).
 * dps310
   - New driver, in several parts from different authors for this temp
     and pressure sensor.
   - Includes errata workaround for a temperature reading issue.
 * stk3310
   - Support the stk3335, mostly ID.
 
 Features and cleanups
 * core
   - drop error handling on debugfs registration.
   - harden by making sure we don't overrun iio_chan_info_postfix.
 * docs
   - convert remaining docs to rst. At somepoint we'll fit these few
     into the main IIO docs.
   - improve sampling_frequency_available docs but explaining the
     range form.
 * ad_sigma_delta
   - Drop a pointless goto.
 * ad2s1210
   - Drop pointless platform data null check seeing as we don't actually
     use platform data anymore.
 * ad7124
   - Relax limitation on channel numbers to allow pseudo different channels.
   - Support control of whether the input is buffered via DT.
   - Use dynamic allocation for channel configuration to make it easier
     to support new devices.
   - YAML binding conversion.
 * ad7150
   - Comment tidy up.
   - Consistent and simple if (ret) handling of i2c errors.
   - FIELD_GET and GENMASK.
   - Ternary rather than !!(condition) for readability.
   - Use macros to avoid repetition of channel definitions.
 * ad7606
   - Add software channel config (rather that pin controlled)
   - Refactor to simplify addition of new part in future.
 * ad7746
   - of_deivce_id table.
 * ad7780
   - MAINTAINERS entry
   - YAML DT bindings.
 * ad8366
   - Stop using core mlock in favour of well scoped local lock.
   - SPDX + copyright date update.
 * ad9834
   - of_device_id table
 * adf4371
   - Add support for output stage muting before lock on has occured.
 * adis library
   - MAINTAINERS entry to reflect that this now Alexandru's problem ;)
 * adis162xx:
   - Fix a slightly incorrect set of comments and print statements on
     minimum supported voltage.
 * adis16203
   - of_device_id table.
 * adis16240
   - Add of_device_id table (in two parts as first patch only used it for
     MODULE_DEVICE_TABLE.)
 * adt7316-spi
   - of_device_id table
 * adxl372
   - YAML DT binding conversion.
   - Cleanup use of buffer callback functions (precursor to core rework).
 * bh1710
   - Simplify getting the i2c adapter from the client.
 * dht11
   - Mote to newer GPIO consumer interface.
 * kxcjk-1013.c
   - Add binding for sensor in display of some ultrabooks after userspace
     tools updated for it not be a problem to report two similar sensors.
 * imx7d
   - drop unused variables.
   - white space
   - define instead of variable for clock frequency that is fixed.
   - drop pointless error message.
 * messon_saradc
   - SPDX
 * sps30
   - MAINTAINERS entry
   - YAML binding conversion.
 * st_accel
   - Tidy up ordering in various buffer related callbacks. This is
     part of a long running effort to simplify the core code.
 * stm32-dfsdm:
   - Manage the resolution cleanly in triggerd modes.
   - Add fast mode support which allows more flexible filter choices.
   - Add a comment on the reason for a 16 bit record when technically
     not 'required'.
 * st_lsm6dsx
   - Embed device name in the sensor_settings struct as i3c doesn't
     have a convenient name field to use for this.
 * xilinx-adc
   - Relax constraints on supported platforms to reflect that this
     can used with FPGAs on PCIe cards and hence many architectures.
 * counters/ftm-quaddec
   - Fix some formatting io MODULE_AUTHOR
   - MAINTAINERS entry
 
 Fixes
 * tools
   - fix incorrect handling of 32 bit channels.
 * sca3000
   - Potential endian bug that is unlikely to bite anyone (be64 host
     seems unlikely for this old part).
 * stm32-adc
   - Add vdda-supply. On some boards it needs to be turned on to supply
     the ADC.  DT bindings included.
 * stm32-dfsdm
   - Fix output resolution to work with filter orders other than 3.
   - Fix output datatype as it's signed and previously claimed not to be.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl0VHIkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojyxhAAgrLRy2wlHjQCAh0S6J22LKs02uPX1qvY
 nm1aI/av2DGcMCV2NF6J1sW2Mocvtt5a79/1f/wRqDzOHBrTpFr0Q0Ngwijv9bzc
 fv6NwfHlWolmXynKx8wK4b6Sa3KVCkltojEVpEVbhkuMkafSQ+pQzYF1Uf7enOrX
 j3Gq6NYaCks4YtFZsBphgzo3DC0mh7CfunlPiOdVcgcg4Pj/KZY9QCX86fJx972x
 YI3BRFHnDSMDOxOTjeqeKvMiqU2zLPlqLSEOCUw2XCrh6HI9qFiU+LVsYx6SP0tx
 aJ2q+qYc9raOTANHk7O2JZYWv/52JXvtKcFSLiuQdABjaAI20xEr1QAZYVYUiXmg
 dFH6lBsWvQyAy5F/SyZ5tavZvTfGsNDB5LhlpEggeO2W6cIIL4CLfHimB2EcxFSH
 utqEA72HQZosEUKut1jbmG6iYMiRnHS72pLOqkJ6HC/2/pZfoEWlEH9x/S3xbBsW
 918ISs9852VwjebQwck96+Dh0LwiKOl8Aii5ONzfNObJB6/JbULPoKKArsMdENQA
 mqDXLOMz6GspY3JgiVDCXAwg2x2Ht/ictR6svRJtOTLiBU2Iybpm/HRkPePhoePF
 HLw8fhwE+mOSWr22KhzjUJBHEAkoejo/14XOgKSTkO9V6amLlOWRDV3uK2PksmdI
 7DQyYhX9Tos=
 =a3vh
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of IIO device support, features, cleanups and minor fixes for 5.3.

A few bits for the counters subsystem mixed in here as well.
There are some late breaking fixes as well, which aren't so urgent
they can't wait for the merge window.

New Device Support
* adf4371
  - New driver + bindings.
  - Support the adf4372 PLL. Mostly ID and bindings.
* ad8366 (note includes rework of driver needed to allow support for these).
  - Support the ADL5240 variable gain amplifier (VGA).
  - Support the ADA4961 digital gain amplifier (DGA).
* dps310
  - New driver, in several parts from different authors for this temp
    and pressure sensor.
  - Includes errata workaround for a temperature reading issue.
* stk3310
  - Support the stk3335, mostly ID.

Features and cleanups
* core
  - drop error handling on debugfs registration.
  - harden by making sure we don't overrun iio_chan_info_postfix.
* docs
  - convert remaining docs to rst. At somepoint we'll fit these few
    into the main IIO docs.
  - improve sampling_frequency_available docs but explaining the
    range form.
* ad_sigma_delta
  - Drop a pointless goto.
* ad2s1210
  - Drop pointless platform data null check seeing as we don't actually
    use platform data anymore.
* ad7124
  - Relax limitation on channel numbers to allow pseudo different channels.
  - Support control of whether the input is buffered via DT.
  - Use dynamic allocation for channel configuration to make it easier
    to support new devices.
  - YAML binding conversion.
* ad7150
  - Comment tidy up.
  - Consistent and simple if (ret) handling of i2c errors.
  - FIELD_GET and GENMASK.
  - Ternary rather than !!(condition) for readability.
  - Use macros to avoid repetition of channel definitions.
* ad7606
  - Add software channel config (rather that pin controlled)
  - Refactor to simplify addition of new part in future.
* ad7746
  - of_deivce_id table.
* ad7780
  - MAINTAINERS entry
  - YAML DT bindings.
* ad8366
  - Stop using core mlock in favour of well scoped local lock.
  - SPDX + copyright date update.
* ad9834
  - of_device_id table
* adf4371
  - Add support for output stage muting before lock on has occured.
* adis library
  - MAINTAINERS entry to reflect that this now Alexandru's problem ;)
* adis162xx:
  - Fix a slightly incorrect set of comments and print statements on
    minimum supported voltage.
* adis16203
  - of_device_id table.
* adis16240
  - Add of_device_id table (in two parts as first patch only used it for
    MODULE_DEVICE_TABLE.)
* adt7316-spi
  - of_device_id table
* adxl372
  - YAML DT binding conversion.
  - Cleanup use of buffer callback functions (precursor to core rework).
* bh1710
  - Simplify getting the i2c adapter from the client.
* dht11
  - Mote to newer GPIO consumer interface.
* kxcjk-1013.c
  - Add binding for sensor in display of some ultrabooks after userspace
    tools updated for it not be a problem to report two similar sensors.
* imx7d
  - drop unused variables.
  - white space
  - define instead of variable for clock frequency that is fixed.
  - drop pointless error message.
* messon_saradc
  - SPDX
* sps30
  - MAINTAINERS entry
  - YAML binding conversion.
* st_accel
  - Tidy up ordering in various buffer related callbacks. This is
    part of a long running effort to simplify the core code.
* stm32-dfsdm:
  - Manage the resolution cleanly in triggerd modes.
  - Add fast mode support which allows more flexible filter choices.
  - Add a comment on the reason for a 16 bit record when technically
    not 'required'.
* st_lsm6dsx
  - Embed device name in the sensor_settings struct as i3c doesn't
    have a convenient name field to use for this.
* xilinx-adc
  - Relax constraints on supported platforms to reflect that this
    can used with FPGAs on PCIe cards and hence many architectures.
* counters/ftm-quaddec
  - Fix some formatting io MODULE_AUTHOR
  - MAINTAINERS entry

Fixes
* tools
  - fix incorrect handling of 32 bit channels.
* sca3000
  - Potential endian bug that is unlikely to bite anyone (be64 host
    seems unlikely for this old part).
* stm32-adc
  - Add vdda-supply. On some boards it needs to be turned on to supply
    the ADC.  DT bindings included.
* stm32-dfsdm
  - Fix output resolution to work with filter orders other than 3.
  - Fix output datatype as it's signed and previously claimed not to be.

* tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits)
  iio: iio-utils: Fix possible incorrect mask calculation
  iio: frequency: adf4371: Add support for output stage mute
  dt-bindings: iio: frequency: Add ADF4372 PLL documentation
  iio: frequency: adf4371: Add support for ADF4372 PLL
  dt-bindings: iio: adc: Add buffered input property
  Convert AD7124 bindings documentation to YAML format.
  iio: adc: ad7124: Shift to dynamic allocation for channel configuration
  iio: adc: ad7124: Add buffered input support
  iio: adc: ad7124: Remove input number limitation
  MAINTAINERS: add ADIS IMU driver library entry
  iio: adis162xx: fix low-power docs & reports
  counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR
  iio: core: no need to check return value of debugfs_create functions
  docs: iio: convert to ReST
  iio: adc: stm32-adc: add missing vdda-supply
  dt-bindings: iio: adc: stm32: add missing vdda supply
  iio: adc: stm32-dfsdm: add comment for 16 bits record
  iio: adc: stm32-dfsdm: add fast mode support
  iio: adc: stm32-dfsdm: manage data resolution in trigger mode
  iio: adc: stm32-dfsdm: fix data type
  ...
2019-07-01 10:58:13 +02:00
Jason A. Donenfeld
9285ec4c8b timekeeping: Use proper clock specifier names in functions
This makes boot uniformly boottime and tai uniformly clocktai, to
address the remaining oversights.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20190621203249.3909-2-Jason@zx2c4.com
2019-06-22 12:11:27 +02:00
Greg Kroah-Hartman
8915aacac4 iio: core: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-iio@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-22 10:44:00 +01:00
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Young Xiao
936d3e536d iio:core: Fix bug in length of event info_mask and catch unhandled bits set in masks.
The incorrect limit for the for_each_set_bit loop was noticed whilst fixing
this other case.  Note that as we only have 3 possible entries a the moment
and the value was set to 4, the bug would not have any effect currently.
It will bite fairly soon though, so best fix it now.

See commit ef4b485659 ("iio:core: Fix bug in length of event info_mask and
catch unhandled bits set in masks.") for details.

Signed-off-by: Young Xiao <92siuyang@gmail.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-17 21:06:44 +01:00
Greg Kroah-Hartman
817de6b859 Merge 5.1-rc6 into staging-next
We want the fixes in here as well as this resolves an iio driver merge
issue.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-21 23:18:44 +02:00
Andy Shevchenko
fb1589710e iio: Allow to read mount matrix from ACPI
Currently mount matrix is allowed in Device Tree, though there is
no technical issue to extend it to support ACPI.

Convert the function to use device_property_read_string_array() and
thus allow to read mount matrix from ACPI if available.

Example of use in _DSD method:

  Name (_DSD, Package ()
  {
     ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
     Package ()
     {
        Package () { "mount-matrix", Package() {
                "1", "0",     "0",
                "0", "0.866", "0.5",
                "0", "-0.5",  "0.866",
        } },
     }
  })

At the same time drop the "of" prefix from its name and
convert current users.

No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04 20:19:46 +01:00
Fabrice Gasnier
7f75591fc5 iio: core: fix a possible circular locking dependency
This fixes a possible circular locking dependency detected warning seen
with:
- CONFIG_PROVE_LOCKING=y
- consumer/provider IIO devices (ex: "voltage-divider" consumer of "adc")

When using the IIO consumer interface, e.g. iio_channel_get(), the consumer
device will likely call iio_read_channel_raw() or similar that rely on
'info_exist_lock' mutex.

typically:
...
	mutex_lock(&chan->indio_dev->info_exist_lock);
	if (chan->indio_dev->info == NULL) {
		ret = -ENODEV;
		goto err_unlock;
	}
	ret = do_some_ops()
err_unlock:
	mutex_unlock(&chan->indio_dev->info_exist_lock);
	return ret;
...

Same mutex is also hold in iio_device_unregister().

The following deadlock warning happens when:
- the consumer device has called an API like iio_read_channel_raw()
  at least once.
- the consumer driver is unregistered, removed (unbind from sysfs)

======================================================
WARNING: possible circular locking dependency detected
4.19.24 #577 Not tainted
------------------------------------------------------
sh/372 is trying to acquire lock:
(kn->count#30){++++}, at: kernfs_remove_by_name_ns+0x3c/0x84

but task is already holding lock:
(&dev->info_exist_lock){+.+.}, at: iio_device_unregister+0x18/0x60

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&dev->info_exist_lock){+.+.}:
       __mutex_lock+0x70/0xa3c
       mutex_lock_nested+0x1c/0x24
       iio_read_channel_raw+0x1c/0x60
       iio_read_channel_info+0xa8/0xb0
       dev_attr_show+0x1c/0x48
       sysfs_kf_seq_show+0x84/0xec
       seq_read+0x154/0x528
       __vfs_read+0x2c/0x15c
       vfs_read+0x8c/0x110
       ksys_read+0x4c/0xac
       ret_fast_syscall+0x0/0x28
       0xbedefb60

-> #0 (kn->count#30){++++}:
       lock_acquire+0xd8/0x268
       __kernfs_remove+0x288/0x374
       kernfs_remove_by_name_ns+0x3c/0x84
       remove_files+0x34/0x78
       sysfs_remove_group+0x40/0x9c
       sysfs_remove_groups+0x24/0x34
       device_remove_attrs+0x38/0x64
       device_del+0x11c/0x360
       cdev_device_del+0x14/0x2c
       iio_device_unregister+0x24/0x60
       release_nodes+0x1bc/0x200
       device_release_driver_internal+0x1a0/0x230
       unbind_store+0x80/0x130
       kernfs_fop_write+0x100/0x1e4
       __vfs_write+0x2c/0x160
       vfs_write+0xa4/0x17c
       ksys_write+0x4c/0xac
       ret_fast_syscall+0x0/0x28
       0xbe906840

other info that might help us debug this:

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&dev->info_exist_lock);
                               lock(kn->count#30);
                               lock(&dev->info_exist_lock);
  lock(kn->count#30);

 *** DEADLOCK ***
...

cdev_device_del() can be called without holding the lock. It should be safe
as info_exist_lock prevents kernelspace consumers to use the exported
routines during/after provider removal. cdev_device_del() is for userspace.

Help to reproduce:
See example: Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
sysv {
	compatible = "voltage-divider";
	io-channels = <&adc 0>;
	output-ohms = <22>;
	full-ohms = <222>;
};

First, go to iio:deviceX for the "voltage-divider", do one read:
$ cd /sys/bus/iio/devices/iio:deviceX
$ cat in_voltage0_raw

Then, unbind the consumer driver. It triggers above deadlock warning.
$ cd /sys/bus/platform/drivers/iio-rescale/
$ echo sysv > unbind

Note I don't actually expect stable will pick this up all the
way back into IIO being in staging, but if's probably valid that
far back.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Fixes: ac917a8111 ("staging:iio:core set the iio_dev.info pointer to null on unregister")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-03-31 11:11:31 +01:00
Tomasz Duszynski
17abc9ec68 iio: add IIO_MASSCONCENTRATION channel type
Measuring particulate matter in ug / m3 (micro-grams per cubic meter)
is de facto standard. Existing air quality sensors usually follow
this convention and are capable of returning measurements using
this unit.

IIO currently does not offer suitable channel type for this
type of measurements hence this patch adds this.

In addition, extra modifiers are introduced used for distinguishing
between fine pm1, pm2p5 and coarse pm4, pm10 particle measurements, i.e
IIO_MOD_PM1, IIO_MOD_PM25 and IIO_MOD_PM4, IIO_MOD_PM10.

pmX consists of particles with aerodynamic diameter less or equal to
X micrometers.

Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-16 14:05:57 +00:00
Andi Shyti
d45ebf1f98 iio: core: check 'info' value before registering the device
When the 'info' structure inside indio_dev is left uninitialized,
a segmentation fault occurs.

Check the 'info' value before using it and if it is equal to
NULL, return with -EINVAL.

Signed-off-by: Andi Shyti <andi@etezian.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-12-08 11:06:41 +00:00
Maxime Roussin-Bélanger
c0e4e0fd95 iio: Add modifier for DUV light
Signed-off-by: Maxime Roussin-Bélanger <maxime.roussinbelanger@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-23 19:18:10 +01:00
Mathieu Othacehe
c73314e6eb iio: Add channel for Phase
Add new channel type support for phase.

This channel may be used by Time-of-flight sensors to express the
phase difference between emitted and received signals. Those sensor
will then use the phase shift of return signals to approximate the
distance to objects.

Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-21 15:28:14 +01:00
Arnd Bergmann
45e7f5d288 iio: use timespec64 based interfaces for iio_get_time_ns()
We have replacements for all the deprecated timespec based interfaces now,
so this can finally convert iio_get_time_ns() to consistently use the
nanosecond or timespec64 based interfaces instead, avoiding the y2038
overflow.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24 14:45:06 +01:00
Eugen Hristev
3055a6cfa0 iio: Add channel for Position Relative
Add new channel type for relative position on a pad.

These type of analog sensor offers the position of a pen
on a touchpad, and is represented as a voltage, which can be
converted to a position on X and Y axis on the pad.
The channel will hand the relative position on the pad in both directions.

The channel can then be consumed by a touchscreen driver or
read as-is for a raw indication of the touchpen on a touchpad.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-10 11:55:15 +01:00
Greg Kroah-Hartman
e8cd29b774 Merge Linus's staging merge point into staging-next
This resolves the merge issue pointed out by Stephen in
drivers/iio/adc/meson_saradc.c.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-06 15:27:17 +01:00
Randy Dunlap
c175cb7cd9 iio: fix kernel-doc build errors
Fix build errors in kernel-doc notation. Symbols that end in '_'
have a special meaning, but adding a '*' makes them OK.

../drivers/iio/industrialio-core.c:635: ERROR: Unknown target name: "iio_val".
../drivers/iio/industrialio-core.c:642: ERROR: Unknown target name: "iio_val".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 11:15:14 +00:00
Gustavo A. R. Silva
9d793c1a7f iio: core: Mark expected switch fall-through
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1397962
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-12-02 10:39:45 +00:00
Greg Kroah-Hartman
1236d6bb6e Merge 4.14-rc4 into staging-next
We want the staging/iio fixes in here as well to handle merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-09 09:02:35 +02:00
Matt Fornero
3d62c78a6e iio: core: Return error for failed read_reg
If an IIO device returns an error code for a read access via debugfs, it
is currently ignored by the IIO core (other than emitting an error
message). Instead, return this error code to user space, so upper layers
can detect it correctly.

Signed-off-by: Matt Fornero <matt.fornero@mathworks.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-24 16:58:32 +01:00
Jonathan Cameron
63b19547cc iio: Use macro magic to avoid manual assign of driver_module
Starting point in boiler plate reduction similar to that done for
many similar cases elsewhere in the kernel.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-08-22 20:03:14 +01:00
Benjamin Gaignard
d89e119a08 iio: add hardware triggered operating mode
Devices, like stm32 timer, could be triggered by hardware events which
are not buffer or software events. However it could be necessary to
validate the triggers like it is done for buffer or event triggered modes.
This patch add a new INDIO_HARDWARE_TRIGGERED operating mode for this
kind of devices and allow this mode to register trigger consumer.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:58:41 +01:00
Andy Shevchenko
02e9a0ff0d iio: core: Use __sysfs_match_string() helper
Use __sysfs_match_string() helper instead of open coded variant.

Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-11 15:07:34 +01:00
Greg Kroah-Hartman
ca9280d1f8 First set of new device support, features and cleanups for IIO in the 4.13 cycle
Two entirely new drivers in here plus the usual range of cleanups and features.
 
 New device support
 * ad5064
   - add ltc2631, ltc2633 and ltc2635 support.
 * bma180
   - trivial support for bma250e (new id)
 * hid-sensor-rotation
   - add relative orientation and geometric orientation support.
 * isl29028
   - add isl29030 support (its effectively the same part from a driver point of
   view)
 * maxim_thermocouple
   - add max31856 id.
 * meson-saradc
   - add meson8b SoC adc support.
 * ti-adc084s021
   - new driver and bindings.
 * ti-adc108s102
   - new driver and bindings.
 
 Staging graduations
 * isl29028
 
 Features
 * bma180
   - ACPI enumeration for BMA250E which is used in various x86 tablets.
 * hi8453
   - add raw access rather than only events.
 * hid-sensor-hub
   - Implement batch mode in which we can set a threshold on the amount of time
   between data coming from the fifos.  This is the first device to do this
   rather than use a watershed on the number of samples.
 * hts221
   - power management support
 * lsm6dsx
   - add system power management support.
 * rpr0521
   - sampling frequency read / write
 * stm32-trigger
   - add support for TRG02 triggers.
 * tsl2583
   - runtime power management support.
 
 Cleanups
 * core
   - inkern: fix a double unlock in iio_read_available_channel_raw when raw
   value doesn't appear to be raw (error path).
   - fixup accidental sizeof pointer in iio_device_add_mask_type.
 * docs
   - fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
 * tools
   - use local include/uapi headers to ensure always up to date.
   - increase length of allowed trigger names.
 * ad9834
   - symbolic to octal permissions.
 * ade7753
   - symbolic to octal permissions.
   - fix indentation
 * ade7754
   - symbolic to octal permissions.
 * ade7758
   - symbolic to octal permissions.
 - ade7854
   - symbolic to octal permissions.
 * as3935
   - move out of storm check to given consistent results for raw and processed
   values.
 * bmp280
   - fix bme280 naming in Kconfig help.
 * hi8435
   - avoid garbage on event after enable.
   - add missing in_voltage_sensing_mode_available to list possible enum options.
   - handle the reset gpio with the obvious polarity rather than relying on
   DT to provide it correctly.
 * hid-sensors
   - fix a wrong error path scrubbing of return values.
 * hid-sensors-accel
   - drop static on a local variable
 * hid-sensors-rotation
   - Add missing scale and offset property parsing support.
 * ina2xx
   - Fix a bad use of GENMASK and some typos and whitespace issues.
 * isl29018
   - only declare the ACPI table when ACPI is enabled.
 * isl29028
   - fix proximity sleep times.
 * lsm6dsx
   - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
   dealing with the various PM config variables.
 * meson-saradc
   - mark meson_sar_adc_data static and const.
 * rcar-gyroadc
   - derive the interface clock speed from the fck clock on the basis they are
   the same actual clock.
   - drop the now unused if clock from the bindings.
 * rpr0521
   - disable sensor when marked as such rather than always enabling it.
   - poweroff if probe fails and we can talk to device.
   - make sure device powered off when it doesn't need to be on.
   - use sizeof rather than hardcoded size on value read.
   - whitespace fixup.
   - reorder channel numbers ready for buffered support which didn't quite
   make this pull request.
 * st-accel
   - fix platform data initialization to allow remove and reprobe.
 * st-pressure
   - fix platform data initialization to allow remove and reprobe.
 * tsl2x7x
   - S_IRUGO, S_IWUSR to octal values
   - rename driver for consistency with more recent drivers
   - drop FSF mailing address
   - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
   relevant function renames.
 * zpa2326
   - report an error for consistency with other error paths.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlkjSHkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojDqQ//TVibBBZ0GgA+MwjIMDCpYL6CW4l+Et5v
 bD1EThc+qf3jv9kWbBz6WgySj9koZeF/hc0GN7x8XF57TeF/8sXhtbZKQ0za0Ouf
 uKAfYNi7jtdA4UEFawYrFUGIZtgQlbll/DKj7x2yDZtwIge9QF61fzPehGpq0u3b
 IiNlNFQSTKXOHi5tobMXXdBFL90m6kqDZM5ZwAWtQoSu1xQTjCsxu/LMJAJ3H7rU
 KEptEhc80kAvGqflOvw/HMaU7O7SXAhW3sQnXM2ksnDScGZ+zNzLcoca1YfM73rv
 x3vM/XL93A6CcRQkzFUC5vbtVVl00BMI7G3PQTGDOWWPgUPksLVIzfJR9GOqNmIJ
 W3HVwQbDZPvAbubvFHlUBa9ys4cbcmwU9214S57DvzVEt+cvpdujjIZ2Ulw3sVqN
 3xB1P9kNlcYvmBBu6LbP5GTDEu+VEETTjwj3osyimi56Zt44pJhoT68D46SD34Zw
 i3LCMFbbdJzEK4UWsvoBKFsTPipXgOntYDXaMZbULjtmJ6PEw0feubQIpMwtF5iw
 4fGk/1Q6l//rItJlXZE9PPiEBbXZ856lk/KQn+9vRABCrFni+7HWf6aDvkjf14o0
 8W+P/kAcXOPrToN2+NnAbIh7c9PLYmFWJa7DvDnQ5Guy0GStlxG18QEMNAhf39/0
 j/xopB1g8MI=
 =XLVY
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-4.13a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 4.13 cycle

Two entirely new drivers in here plus the usual range of cleanups and features.

New device support
* ad5064
  - add ltc2631, ltc2633 and ltc2635 support.
* bma180
  - trivial support for bma250e (new id)
* hid-sensor-rotation
  - add relative orientation and geometric orientation support.
* isl29028
  - add isl29030 support (its effectively the same part from a driver point of
  view)
* maxim_thermocouple
  - add max31856 id.
* meson-saradc
  - add meson8b SoC adc support.
* ti-adc084s021
  - new driver and bindings.
* ti-adc108s102
  - new driver and bindings.

Staging graduations
* isl29028

Features
* bma180
  - ACPI enumeration for BMA250E which is used in various x86 tablets.
* hi8453
  - add raw access rather than only events.
* hid-sensor-hub
  - Implement batch mode in which we can set a threshold on the amount of time
  between data coming from the fifos.  This is the first device to do this
  rather than use a watershed on the number of samples.
* hts221
  - power management support
* lsm6dsx
  - add system power management support.
* rpr0521
  - sampling frequency read / write
* stm32-trigger
  - add support for TRG02 triggers.
* tsl2583
  - runtime power management support.

Cleanups
* core
  - inkern: fix a double unlock in iio_read_available_channel_raw when raw
  value doesn't appear to be raw (error path).
  - fixup accidental sizeof pointer in iio_device_add_mask_type.
* docs
  - fix an accidental duplicated line in sysfs-bus-iio-meas-spec.
* tools
  - use local include/uapi headers to ensure always up to date.
  - increase length of allowed trigger names.
* ad9834
  - symbolic to octal permissions.
* ade7753
  - symbolic to octal permissions.
  - fix indentation
* ade7754
  - symbolic to octal permissions.
* ade7758
  - symbolic to octal permissions.
- ade7854
  - symbolic to octal permissions.
* as3935
  - move out of storm check to given consistent results for raw and processed
  values.
* bmp280
  - fix bme280 naming in Kconfig help.
* hi8435
  - avoid garbage on event after enable.
  - add missing in_voltage_sensing_mode_available to list possible enum options.
  - handle the reset gpio with the obvious polarity rather than relying on
  DT to provide it correctly.
* hid-sensors
  - fix a wrong error path scrubbing of return values.
* hid-sensors-accel
  - drop static on a local variable
* hid-sensors-rotation
  - Add missing scale and offset property parsing support.
* ina2xx
  - Fix a bad use of GENMASK and some typos and whitespace issues.
* isl29018
  - only declare the ACPI table when ACPI is enabled.
* isl29028
  - fix proximity sleep times.
* lsm6dsx
  - replace ifdef CONFIG_PM with __maybe_unused to avoid the complexity of
  dealing with the various PM config variables.
* meson-saradc
  - mark meson_sar_adc_data static and const.
* rcar-gyroadc
  - derive the interface clock speed from the fck clock on the basis they are
  the same actual clock.
  - drop the now unused if clock from the bindings.
* rpr0521
  - disable sensor when marked as such rather than always enabling it.
  - poweroff if probe fails and we can talk to device.
  - make sure device powered off when it doesn't need to be on.
  - use sizeof rather than hardcoded size on value read.
  - whitespace fixup.
  - reorder channel numbers ready for buffered support which didn't quite
  make this pull request.
* st-accel
  - fix platform data initialization to allow remove and reprobe.
* st-pressure
  - fix platform data initialization to allow remove and reprobe.
* tsl2x7x
  - S_IRUGO, S_IWUSR to octal values
  - rename driver for consistency with more recent drivers
  - drop FSF mailing address
  - replace DEVICE_ATTR macros with the shorter DEVICE_ATTR_RW form and
  relevant function renames.
* zpa2326
  - report an error for consistency with other error paths.
2017-05-29 15:53:42 +02:00
Linus Torvalds
af82455f7d char/misc patches for 4.12-rc1
Here is the big set of new char/misc driver drivers and features for
 4.12-rc1.
 
 There's lots of new drivers added this time around, new firmware drivers
 from Google, more auxdisplay drivers, extcon drivers, fpga drivers, and
 a bunch of other driver updates.  Nothing major, except if you happen to
 have the hardware for these drivers, and then you will be happy :)
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQvAgg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+yknsACgzkAeyz16Z97J3UTaeejbR7nKUCAAoKY4WEHY
 8O9f9pr9gj8GMBwxeZQa
 =OIfB
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the big set of new char/misc driver drivers and features for
  4.12-rc1.

  There's lots of new drivers added this time around, new firmware
  drivers from Google, more auxdisplay drivers, extcon drivers, fpga
  drivers, and a bunch of other driver updates. Nothing major, except if
  you happen to have the hardware for these drivers, and then you will
  be happy :)

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (136 commits)
  firmware: google memconsole: Fix return value check in platform_memconsole_init()
  firmware: Google VPD: Fix return value check in vpd_platform_init()
  goldfish_pipe: fix build warning about using too much stack.
  goldfish_pipe: An implementation of more parallel pipe
  fpga fr br: update supported version numbers
  fpga: region: release FPGA region reference in error path
  fpga altera-hps2fpga: disable/unprepare clock on error in alt_fpga_bridge_probe()
  mei: drop the TODO from samples
  firmware: Google VPD sysfs driver
  firmware: Google VPD: import lib_vpd source files
  misc: lkdtm: Add volatile to intentional NULL pointer reference
  eeprom: idt_89hpesx: Add OF device ID table
  misc: ds1682: Add OF device ID table
  misc: tsl2550: Add OF device ID table
  w1: Remove unneeded use of assert() and remove w1_log.h
  w1: Use kernel common min() implementation
  uio_mf624: Align memory regions to page size and set correct offsets
  uio_mf624: Refactor memory info initialization
  uio: Allow handling of non page-aligned memory regions
  hangcheck-timer: Fix typo in comment
  ...
2017-05-04 19:15:35 -07:00
Orson Zhai
1016d56765 iio: core: Fix suspicious sizeof usage
Pointer size is variours in different system, say 32bit for 4 and 64bit
for 8. The 'sizeof(infomask)' may lead to wrong bit numbers.

Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-27 06:30:52 +01:00
Nikolaus Schulz
7fd6592d12 iio: core: Fix IIO_VAL_FRACTIONAL_LOG2 for negative values
Fix formatting of negative values of type IIO_VAL_FRACTIONAL_LOG2 by
switching from do_div(), which can't handle negative numbers, to
div_s64_rem().  Also use shift_right for shifting, which is safe with
negative values.

Signed-off-by: Nikolaus Schulz <nikolaus.schulz@avionic-design.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-02 11:14:49 +01:00
Logan Gunthorpe
38923911dc iio:core: utilize new cdev_device_add helper function
Replace the open coded registration of the cdev and dev with the
new device_add_cdev() helper. The helper replaces a common pattern by
taking the proper reference against the parent device and adding both
the cdev and the device.

In doing so we have to remove a guard statement from cdev_del,
but this doesn't appear to be required in any way.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-21 06:44:33 +01:00
Jonathan Cameron
33dd94cb97 iio:buffer.h - split into buffer.h and buffer_impl.h
buffer.h supplies everything needed for devices using buffers.
buffer_impl.h supplies access to the internals as needed to write
a buffer implementation.

This was really motivated by the mess that turned up in the
kernel-doc documentation pulled in by the new sphinx docs.
It made it clear that our logical separations in headers were
generally terrible.  The buffer case was easy to sort out without
greatly effecting drivers so here it is.

Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
2017-01-10 19:54:55 +00:00
Song Hongyan
571299d099 iio: Add channel for Gravity
Add new channel types support for gravity sensor.

Gravity sensor provides an application-level or physical collection that
identifies a device that measures exclusively the force of Earth's
gravity along any number of axes.

More information can be found in:
http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf

Signed-off-by: Song Hongyan <hongyan.song@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-05 13:02:25 +00:00