This patch moves the call to ceph_osdc_build_request() out of
ceph_osdc_new_request() and into its caller.
This is in order to defer formatting osd operation information into
the request message until just before request is started.
The only unusual (ab)user of ceph_osdc_build_request() is
ceph_writepages_start(), where the final length of write request may
change (downward) based on the current inode size or the oldest
snapshot context with dirty data for the inode.
The remaining callers don't change anything in the request after has
been built.
This means the ops array is now supplied by the caller. It also
means there is no need to pass the mtime to ceph_osdc_new_request()
(it gets provided to ceph_osdc_build_request()). And rather than
passing a do_sync flag, have the number of ops in the ops array
supplied imply adding a second STARTSYNC operation after the READ or
WRITE requested.
This and some of the patches that follow are related to having the
messenger (only) be responsible for filling the content of the
message header, as described here:
http://tracker.ceph.com/issues/4589
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Keep track of the length of the data portion for a message in a
separate field in the ceph_msg structure. This information has
been maintained in wire byte order in the message header, but
that's going to change soon.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A field in an osd request keeps track of whether a connection is
currently filling the request's reply message. This patch gets rid
of that field.
An osd request includes two messages--a request and a reply--and
they're both associated with the connection that existed to its
the target osd at the time the request was created.
An osd request can be dropped early, even when it's in flight.
And at that time both messages are released. It's possible the
reply message has been supplied to its connection to receive
an incoming response message at the time the osd request gets
dropped. So ceph_osdc_release_request() revokes that message
from the connection before releasing it so things get cleaned up
properly.
Previously this may have caused a problem, because the connection
that a message was associated with might have gone away before the
revoke request. And to avoid any problems using that connection,
the osd client held a reference to it when it supplies its response
message.
However since this commit:
38941f80 libceph: have messages point to their connection
all messages hold a reference to the connection they are associated
with whenever the connection is actively operating on the message
(i.e. while the message is queued to send or sending, and when it
data is being received into it). And if a message has no connection
associated with it, ceph_msg_revoke_incoming() won't do anything
when asked to revoke it.
As a result, there is no need to keep an additional reference to the
connection associated with a message when we hand the message to the
messenger when it calls our alloc_msg() method to receive something.
If the connection *were* operating on it, it would have its own
reference, and if not, there's no work to be done when we need to
revoke it.
So get rid of the osd request's r_con_filling_msg field.
This resolves:
http://tracker.ceph.com/issues/4647
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are two basically identical definitions of __decode_pgid()
in libceph, one in "net/ceph/osdmap.c" and the other in
"net/ceph/osd_client.c". Get rid of both, and instead define
a single inline version in "include/linux/ceph/osdmap.h".
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The osd client mutex is acquired just before getting a reference to
a request in handle_reply(). However the error paths after that
don't drop the mutex before returning as they should.
Drop the mutex after dropping the request reference. Also add a
bad_mutex label at that point and use it so the failed request
lookup case can be handled with the rest.
This resolves:
http://tracker.ceph.com/issues/4615
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Use osd_req_op_extent_init() in ceph_osdc_new_request() to
initialize the one or two ops built in that function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All callers of ceph_osd_new_request() pass either CEPH_OSD_OP_READ
or CEPH_OSD_OP_WRITE as the opcode value. The function assumes it
by filling in the extent fields in the ops array it builds. So just
assert that is the case, and don't bother calling op_has_extent()
before filling in the first osd operation in the array.
Define some local variables to gather the information to fill into
the first op, and then fill in the op array all in one place.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The ceph_osdc_new_request() an array of osd operations is built up
and filled in partially within that function and partially in the
called function calc_layout(). Move the latter part back out to
ceph_osdc_new_request() so it's all done in one place. This makes
it unnecessary to pass the op pointer to calc_layout(), so get rid
of that parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The purpose of calc_layout() is to determine, given a file offset
and length and a layout describing the placement of file data across
objects, where in "object space" that data resides.
Specifically, it determines which object should hold the first part
of the specified range of file data, and the offset and length of
data within that object. The length will not exceed the bounds
of the object, and the caller is informed of that maximum length.
Add two parameters to calc_layout() to allow the object-relative
offset and length to be passed back to the caller.
This is the first steps toward having ceph_osdc_new_request() build
its osd op structure using osd_req_op_extent_init().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The rbd code has a function that allocates and populates a
ceph_osd_req_op structure (the in-core version of an osd request
operation). When reviewed, Josh suggested two things: that the
big varargs function might be better split into type-specific
functions; and that this functionality really belongs in the osd
client rather than rbd.
This patch implements both of Josh's suggestions. It breaks
up the rbd function into separate functions and defines them
in the osd client module as exported interfaces. Unlike the
rbd version, however, the functions don't allocate an osd_req_op
structure; they are provided the address of one and that is
initialized instead.
The rbd function has been eliminated and calls to it have been
replaced by calls to the new routines. The rbd code now now use a
stack (struct) variable to hold the op rather than allocating and
freeing it each time.
For now only the capabilities used by rbd are implemented.
Implementing all the other osd op types, and making the rest of the
code use it will be done separately, in the next few patches.
Note that only the extent, cls, and watch portions of the
ceph_osd_req_op structure are currently used. Delete the others
(xattr, pgls, and snap) from its definition so nobody thinks it's
actually implemented or needed. We can add it back again later
if needed, when we know it's been tested.
This (and a few follow-on patches) resolves:
http://tracker.ceph.com/issues/3861
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a separate function to determine the validity of an opcode,
and use it inside osd_req_encode_op() in order to unclutter that
function.
Don't update the destination op at all--and return zero--if an
unsupported or unrecognized opcode is seen in osd_req_encode_op().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In ceph_osdc_build_request() there is a call to cpu_to_le16() which
provides a 64-bit value as its argument. Because of the implied
byte swapping going on it looked pretty suspect to me.
At the moment it turns out the behavior is well defined, but masking
off those bottom bits explicitly eliminates this distraction, and is
in fact more directly related to the purpose of the message header's
data_off field.
This resolves:
http://tracker.ceph.com/issues/4125
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When a cursor for a page array data message is initialized it needs
to determine the initial value for cursor->last_piece. Currently it
just checks if length is less than a page, but that's not correct.
The data in the first page in the array will be offset by a page
offset based on the alignment recorded for the data. (All pages
thereafter will be aligned at the base of the page, so there's
no need to account for this except for the first page.)
Because this was wrong, there was a case where the length of a piece
would be calculated as all of the residual bytes in the message and
that plus the page offset could exceed the length of a page.
So fix this case. Make sure the sum won't wrap.
This resolves a third issue described in:
http://tracker.ceph.com/issues/4598
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Currently ceph_msg_data_pages_advance() allows the page offset value
to be PAGE_SIZE, apparently assuming ceph_msg_data_pages_next() will
treat it as 0. But that doesn't happen, and the result led to a
helpful assertion failure.
Change ceph_msg_data_pages_advance() to truncate the offset to 0
before returning if it reaches PAGE_SIZE.
Make a few other minor adjustments in this area (comments and a
better assertion) while modifying it.
This resolves a second issue described in:
http://tracker.ceph.com/issues/4598
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
It's OK for the result of a read to come back with fewer bytes than
were requested. So don't trigger a BUG() in that case when
initializing the data cursor.
This resolves the first problem described in:
http://tracker.ceph.com/issues/4598
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Begin the transition from a single message data item to a list of
them by replacing the "data" structure in a message with a pointer
to a ceph_msg_data structure.
A null pointer will indicate the message has no data; replace the
use of ceph_msg_has_data() with a simple check for a null pointer.
Create functions ceph_msg_data_create() and ceph_msg_data_destroy()
to dynamically allocate and free a data item structure of a given type.
When a message has its data item "set," allocate one of these to
hold the data description, and free it when the last reference to
the message is dropped.
This partially resolves:
http://tracker.ceph.com/issues/4429
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The *_msg_pos_next() functions do little more than call
ceph_msg_data_advance(). Replace those wrapper functions with
a simple call to ceph_msg_data_advance().
This cleanup is related to:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In write_partial_message_data() we aggregate the crc for the data
portion of the message as each new piece of the data item is
encountered. Because it was computed *before* sending the data, if
an attempt to send a new piece resulted in 0 bytes being sent, the
crc crc across that piece would erroneously get computed again and
added to the aggregate result. This would occasionally happen in
the evnet of a connection failure.
The crc value isn't really needed until the complete value is known
after sending all data, so there's no need to compute it before
sending.
So don't calculate the crc for a piece until *after* we know at
least one byte of it has been sent. That will avoid this problem.
This resolves:
http://tracker.ceph.com/issues/4450
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
The only remaining field in the ceph_msg_pos structure is
did_page_crc. In the new cursor model of things that flag (or
something like it) belongs in the cursor.
Define a new field "need_crc" in the cursor (which applies to all
types of data) and initialize it to true whenever a cursor is
initialized.
In write_partial_message_data(), the data CRC still will be computed
as before, but it will check the cursor->need_crc field to determine
whether it's needed. Any time the cursor is advanced to a new piece
of a data item, need_crc will be set, and this will cause the crc
for that entire piece to be accumulated into the data crc.
In write_partial_message_data() the intermediate crc value is now
held in a local variable so it doesn't have to be byte-swapped so
many times. In read_partial_msg_data() we do something similar
(but mainly for consistency there).
With that, the ceph_msg_pos structure can go away, and it no longer
needs to be passed as an argument to prepare_message_data().
This cleanup is related to:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All but one of the fields in the ceph_msg_pos structure are now
never used (only assigned), so get rid of them. This allows
several small blocks of code to go away.
This is cleanup of old code related to:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Use the "resid" field of a cursor rather than finding when the
message data position has moved up to meet the data length to
determine when all data has been sent or received in
write_partial_message_data() and read_partial_msg_data().
This is cleanup of old code related to:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
It turns out that only one of the data item types is ever used at
any one time in a single message (currently).
- A page array is used by the osd client (on behalf of the file
system) and by rbd. Only one osd op (and therefore at most
one data item) is ever used at a time by rbd. And the only
time the file system sends two, the second op contains no
data.
- A bio is only used by the rbd client (and again, only one
data item per message)
- A page list is used by the file system and by rbd for outgoing
data, but only one op (and one data item) at a time.
We can therefore collapse all three of our data item fields into a
single field "data", and depend on the messenger code to properly
handle it based on its type.
This allows us to eliminate quite a bit of duplicated code.
This is related to:
http://tracker.ceph.com/issues/4429
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Now that read_partial_message_pages() and read_partial_message_bio()
are literally identical functions we can factor them out. They're
pretty simple as well, so just move their relevant content into
read_partial_msg_data().
This is and previous patches together resolve:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is handling in write_partial_message_data() for the case where
only the length of--and no other information about--the data to be
sent has been specified. It uses the zero page as the source of
data to send in this case.
This case doesn't occur. All message senders set up a page array,
pagelist, or bio describing the data to be sent. So eliminate the
block of code that handles this (but check and issue a warning for
now, just in case it happens for some reason).
This resolves:
http://tracker.ceph.com/issues/4426
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The cursor code for a page array selects the right page, page
offset, and length to use for a ceph_tcp_recvpage() call, so
we can use it to replace a block in read_partial_message_pages().
This partially resolves:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The bio_iter and bio_seg fields in a message are no longer used, we
use the cursor instead. So get rid of them and the functions that
operate on them them.
This is related to:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Replace the use of the information in con->in_msg_pos for incoming
bio data. The old in_msg_pos and the new cursor mechanism do
basically the same thing, just slightly differently.
The main functional difference is that in_msg_pos keeps track of the
length of the complete bio list, and assumed it was fully consumed
when that many bytes had been transferred. The cursor does not assume
a length, it simply consumes all bytes in the bio list. Because the
only user of bio data is the rbd client, and because the length of a
bio list provided by rbd client always matches the number of bytes
in the list, both ways of tracking length are equivalent.
In addition, for in_msg_pos the initial bio vector is selected as
the initial value of the bio->bi_idx, while the cursor assumes this
is zero. Again, the rbd client always passes 0 as the initial index
so the effect is the same.
Other than that, they basically match:
in_msg_pos cursor
---------- ------
bio_iter bio
bio_seg vec_index
page_pos page_offset
The in_msg_pos field is initialized by a call to init_bio_iter().
The bio cursor is initialized by ceph_msg_data_cursor_init().
Both now happen in the same spot, in prepare_message_data().
The in_msg_pos field is advanced by a call to in_msg_pos_next(),
which updates page_pos and calls iter_bio_next() to move to the next
bio vector, or to the next bio in the list. The cursor is advanced
by ceph_msg_data_advance(). That isn't currently happening so
add a call to that in in_msg_pos_next().
Finally, the next piece of data to use for a read is determined
by a bunch of lines in read_partial_message_bio(). Those can be
replaced by an equivalent ceph_msg_data_bio_next() call.
This partially resolves:
http://tracker.ceph.com/issues/4428
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
All of the data types can use this, not just the page array. Until
now, only the bio type doesn't have it available, and only the
initiator of the request (the rbd client) is able to supply the
length of the full request without re-scanning the bio list. Change
the cursor init routines so the length is supplied based on the
message header "data_len" field, and use that length to intiialize
the "resid" field of the cursor.
In addition, change the way "last_piece" is defined so it is based
on the residual number of bytes in the original request. This is
necessary (at least for bio messages) because it is possible for
a read request to succeed without consuming all of the space
available in the data buffer.
This resolves:
http://tracker.ceph.com/issues/4427
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The value passed for "pages" in read_partial_message_pages() is
always the pages pointer from the incoming message, which can be
derived inside that function. So just get rid of the parameter.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When the last reference to a ceph message is dropped,
ceph_msg_last_put() is called to clean things up.
For "normal" messages (allocated via ceph_msg_new() rather than
being allocated from a memory pool) it's sufficient to just release
resources. But for a mempool-allocated message we actually have to
re-initialize the data fields in the message back to initial state
so they're ready to go in the event the message gets reused.
Some of this was already done; this fleshes it out so it's done
more completely.
This resolves:
http://tracker.ceph.com/issues/4540
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd expects the transaction ids of arriving request messages from
a given client to a given osd to increase monotonically. So the osd
client needs to send its requests in ascending tid order.
The transaction id for a request is set at the time it is
registered, in __register_request(). This is also where the request
gets placed at the end of the osd client's unsent messages list.
At the end of ceph_osdc_start_request(), the request message for a
newly-mapped osd request is supplied to the messenger to be sent
(via __send_request()). If any other messages were present in the
osd client's unsent list at that point they would be sent *after*
this new request message.
Because those unsent messages have already been registered, their
tids would be lower than the newly-mapped request message, and
sending that message first can violate the tid ordering rule.
Rather than sending the new request only, send all queued requests
(including the new one) at that point in ceph_osdc_start_request().
This ensures the tid ordering property is preserved.
With this in place, all messages should now be sent in tid order
regardless of whether they're being sent for the first time or
re-sent as a result of a call to osd_reset().
This resolves:
http://tracker.ceph.com/issues/4392
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>
In __map_request(), when adding a request to an osd client's unsent
list, add it to the tail rather than the head. That way the newest
entries (with the highest tid value) will be last.
Maintain an osd's request list in order of increasing tid also.
Finally--to be consistent--maintain an osd client's "notarget" list
in that order as well.
This partially resolves:
http://tracker.ceph.com/issues/4392
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>
The osd expects incoming requests for a given object from a given
client to arrive in order, with the tid for each request being
greater than the tid for requests that have already arrived. This
patch fixes two places the osd client might not maintain that
ordering.
For the osd client, the connection fault method is osd_reset().
That function calls __reset_osd() to close and re-open the
connection, then calls __kick_osd_requests() to cause all
outstanding requests for the affected osd to be re-sent after
the connection has been re-established.
When an osd is reset, any in-flight messages will need to be
re-sent. An osd client maintains distinct lists for unsent and
in-flight messages. Meanwhile, an osd maintains a single list of
all its requests (both sent and un-sent). (Each message is linked
into two lists--one for the osd client and one list for the osd.)
To process an osd "kick" operation, the request list for the *osd*
is traversed, and each request is moved off whichever osd *client*
list it was on (unsent or sent) and placed onto the osd client's
unsent list. (It remains where it is on the osd's request list.)
When that is done, osd_reset() calls __send_queued() to cause each
of the osd client's unsent messages to be sent.
OK, with that background...
As the osd request list is traversed each request is prepended to
the osd client's unsent list in the order they're seen. The effect
of this is to reverse the order of these requests as they are put
(back) onto the unsent list.
Instead, build up a list of only the requests for an osd that have
already been sent (by checking their r_sent flag values). Once an
unsent request is found, stop examining requests and prepend the
requests that need re-sending to the osd client's unsent list.
Preserve the original order of requests in the process (previously
re-queued requests were reversed in this process). Because they
have already been sent, they will have lower tids than any request
already present on the unsent list.
Just below that, traverse the linger list in forward order as
before, but add them to the *tail* of the list rather than the head.
These requests get re-registered, and in the process are give a new
(higher) tid, so the should go at the end.
This partially resolves:
http://tracker.ceph.com/issues/4392
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>
Since we no longer drop the request mutex between registering and
mapping an osd request in ceph_osdc_start_request(), there is no
chance of a race with kick_requests().
We can now therefore map and send the new request unconditionally
(but we'll issue a warning should it ever occur).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>
One of the first things ceph_osdc_start_request() does is register
the request. It then acquires the osd client's map semaphore and
request mutex and proceeds to map and send the request.
There is no reason the request has to be registered before acquiring
the map semaphore. So hold off doing so until after the map
semaphore is held.
Since register_request() is nothing more than a wrapper around
__register_request(), call the latter function instead, after
acquiring the request mutex.
That leaves register_request() unused, so get rid of it.
This partially resolves:
http://tracker.ceph.com/issues/4392
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-off-by: Sage Weil <sage@inktank.com>
The auth code is called from a variety of contexts, include the mon_client
(protected by the monc's mutex) and the messenger callbacks (currently
protected by nothing). Avoid chaos by protecting all auth state with a
mutex. Nothing is blocking, so this should be simple and lightweight.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Use wrapper functions that check whether the auth op exists so that callers
do not need a bunch of conditional checks. Simplifies the external
interface.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Currently the messenger calls out to a get_authorizer con op, which will
create a new authorizer if it doesn't yet have one. In the meantime, when
we rotate our service keys, the authorizer doesn't get updated. Eventually
it will be rejected by the server on a new connection attempt and get
invalidated, and we will then rebuild a new authorizer, but this is not
ideal.
Instead, if we do have an authorizer, call a new update_authorizer op that
will verify that the current authorizer is using the latest secret. If it
is not, we will build a new one that does. This avoids the transient
failure.
This fixes one of the sorry sequence of events for bug
http://tracker.ceph.com/issues/4282
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
We were invalidating the authorizer by removing the ticket handler
entirely. This was effective in inducing us to request a new authorizer,
but in the meantime it mean that any authorizer we generated would get a
new and initialized handler with secret_id=0, which would always be
rejected by the server side with a confusing error message:
auth: could not find secret_id=0
cephx: verify_authorizer could not get service secret for service osd secret_id=0
Instead, simply clear the validity field. This will still induce the auth
code to request a new secret, but will let us continue to use the old
ticket in the meantime. The messenger code will probably continue to fail,
but the exponential backoff will kick in, and eventually the we will get a
new (hopefully more valid) ticket from the mon and be able to continue.
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
We maintain a counter of failed auth attempts to allow us to retry once
before failing. However, if the second attempt succeeds, the flag isn't
cleared, which makes us think auth failed again later when the connection
resets for other reasons (like a socket error).
This is one part of the sorry sequence of events in bug
http://tracker.ceph.com/issues/4282
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
This is an old protocol extension that allows the client and server to
avoid resending old messages after a reconnect (following a socket error).
Instead, the exchange their sequence numbers during the handshake. This
avoids sending a bunch of useless data over the socket.
It has been supported in the server code since v0.22 (Sep 2010).
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
Basically all cases in write_partial_msg_pages() use the cursor, and
as a result we can simplify that function quite a bit.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The wart that is the ceph message trail can now be removed, because
its only user was the osd client, and the previous patch made that
no longer the case.
The result allows write_partial_msg_pages() to be simplified
considerably.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The osd trail is a pagelist, used only for a CALL osd operation
to hold the class and method names, along with any input data for
the call.
It is only currently used by the rbd client, and when it's used it
is the only bit of outbound data in the osd request. Since we
already support (non-trail) pagelist data in a message, we can
just save this outbound CALL data in the "normal" pagelist rather
than the trail, and get rid of the trail entirely.
The existing pagelist support depends on the pagelist being
dynamically allocated, and ownership of it is passed to the
messenger once it's been attached to a message. (That is to say,
the messenger releases and frees the pagelist when it's done with
it). That means we need to dynamically allocate the pagelist also.
Note that we simply assert that the allocation of a pagelist
structure succeeds. Appending to a pagelist might require a dynamic
allocation, so we're already assuming we won't run into trouble
doing so (we're just ignore any failures--and that should be fixed
at some point).
This resolves:
http://tracker.ceph.com/issues/4407
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Add support for recording a ceph pagelist as data associated with an
osd request.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The length of outgoing data in an osd request is dependent on the
osd ops that are embedded in that request. Each op is encoded into
a request message using osd_req_encode_op(), so that should be used
to determine the amount of outgoing data implied by the op as it
is encoded.
Have osd_req_encode_op() return the number of bytes of outgoing data
implied by the op being encoded, and accumulate and use that in
ceph_osdc_build_request().
As a result, ceph_osdc_build_request() no longer requires its "len"
parameter, so get rid of it.
Using the sum of the op lengths rather than the length provided is
a valid change because:
- The only callers of osd ceph_osdc_build_request() are
rbd and the osd client (in ceph_osdc_new_request() on
behalf of the file system).
- When rbd calls it, the length provided is only non-zero for
write requests, and in that case the single op has the
same length value as what was passed here.
- When called from ceph_osdc_new_request(), (it's not all that
easy to see, but) the length passed is also always the same
as the extent length encoded in its (single) write op if
present.
This resolves:
http://tracker.ceph.com/issues/4406
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Implement and use cursor routines for page array message data items
for outbound message data.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Implement and use cursor routines for bio message data items for
outbound message data.
(See the previous commit for reasoning in support of the changes
in out_msg_pos_next().)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Switch to using the message cursor for the (non-trail) outgoing
pagelist data item in a message if present.
Notes on the logic changes in out_msg_pos_next():
- only the mds client uses a ceph pagelist for message data;
- if the mds client ever uses a pagelist, it never uses a page
array (or anything else, for that matter) for data in the same
message;
- only the osd client uses the trail portion of a message data,
and when it does, it never uses any other data fields for
outgoing data in the same message; and finally
- only the rbd client uses bio message data (never pagelist).
Therefore out_msg_pos_next() can assume:
- if we're in the trail portion of a message, the message data
pagelist, data, and bio can be ignored; and
- if there is a page list, there will never be any a bio or page
array data, and vice-versa.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This just inserts some infrastructure in preparation for handling
other types of ceph message data items. No functional changes,
just trying to simplify review by separating out some noise.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This patch lays out the foundation for using generic routines to
manage processing items of message data.
For simplicity, we'll start with just the trail portion of a
message, because it stands alone and is only present for outgoing
data.
First some basic concepts. We'll use the term "data item" to
represent one of the ceph_msg_data structures associated with a
message. There are currently four of those, with single-letter
field names p, l, b, and t. A data item is further broken into
"pieces" which always lie in a single page. A data item will
include a "cursor" that will track state as the memory defined by
the item is consumed by sending data from or receiving data into it.
We define three routines to manipulate a data item's cursor: the
"init" routine; the "next" routine; and the "advance" routine. The
"init" routine initializes the cursor so it points at the beginning
of the first piece in the item. The "next" routine returns the
page, page offset, and length (limited by both the page and item
size) of the next unconsumed piece in the item. It also indicates
to the caller whether the piece being returned is the last one in
the data item.
The "advance" routine consumes the requested number of bytes in the
item (advancing the cursor). This is used to record the number of
bytes from the current piece that were actually sent or received by
the network code. It returns an indication of whether the result
means the current piece has been fully consumed. This is used by
the message send code to determine whether it should calculate the
CRC for the next piece processed.
The trail of a message is implemented as a ceph pagelist. The
routines defined for it will be usable for non-trail pagelist data
as well.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Group the types of message data into an abstract structure with a
type indicator and a union containing fields appropriate to the
type of data it represents. Use this to represent the pages,
pagelist, bio, and trail in a ceph message.
Verify message data is of type NONE in ceph_msg_data_set_*()
routines. Since information about message data of type NONE really
should not be interpreted, get rid of the other assertions in those
functions.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
A ceph message has a data payload portion. The memory for that data
(either the source of data to send or the location to place data
that is received) is specified in several ways. The ceph_msg
structure includes fields for all of those ways, but this
mispresents the fact that not all of them are used at a time.
Specifically, the data in a message can be in:
- an array of pages
- a list of pages
- a list of Linux bios
- a second list of pages (the "trail")
(The two page lists are currently only ever used for outgoing data.)
Impose more structure on the ceph message, making the grouping of
some of these fields explicit. Shorten the name of the
"page_alignment" field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define and use macros ceph_msg_has_*() to determine whether to
operate on the pages, pagelist, bio, and trail fields of a message.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Factor out a common block of code that updates a CRC calculation
over a range of data in a page.
This and the preceding patches are related to:
http://tracker.ceph.com/issues/4403
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function ceph_tcp_recvpage() that behaves in a way
comparable to ceph_tcp_sendpage().
Rearrange the code in both read_partial_message_pages() and
read_partial_message_bio() so they have matching structure,
(similar to what's in write_partial_msg_pages()), and use
this new function.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull the code that reads the data portion into a message into
a separate function read_partial_msg_data().
Rename write_partial_msg_pages() to be write_partial_message_data()
to match its read counterpart, and to reflect its more generic
purpose.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define local variables page_offset and length to represent the range
of bytes within a page that will be sent by ceph_tcp_sendpage() in
write_partial_msg_pages().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In prepare_write_message_data(), various fields are initialized in
preparation for writing message data out. Meanwhile, in
read_partial_message(), there is essentially the same block of code,
operating on message variables associated with an incoming message.
Generalize prepare_write_message_data() so it works for both
incoming and outcoming messages, and use it in both spots. The
did_page_crc is not used for input (so it's harmless to initialize
it).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There are several places where a message's out_msg_pos or in_msg_pos
field is used repeatedly within a function. Use a local pointer
variable for this purpose to unclutter the code.
This and the upcoming cleanup patches are related to:
http://tracker.ceph.com/issues/4403
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
At one time it was necessary to clear a message's bio_iter field to
avoid a bad pointer dereference in write_partial_msg_pages().
That no longer seems to be the case. Here's why.
The message's bio fields represent (in this case) outgoing data.
Between where the bio_iter is made NULL in prepare_write_message()
and the call in that function to prepare_message_data(), the
bio fields are never used.
In prepare_message_data(), init-bio_iter() is called, and the result
of that overwrites the value in the message's bio_iter field.
Because it gets overwritten anyway, there is no need to set it to
NULL. So don't do it.
This resolves:
http://tracker.ceph.com/issues/4402
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The mds client no longer tries to assign zero-length message data,
and the osd client no longer sets its data info more than once.
This allows us to activate assertions in the messenger to verify
these things never happen.
This resolves both of these:
http://tracker.ceph.com/issues/4263http://tracker.ceph.com/issues/4284
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
When an incoming message is destined for the osd client, the
messenger calls the osd client's alloc_msg method. That function
looks up which request has the tid matching the incoming message,
and returns the request message that was preallocated to receive the
response. The response message is therefore known before the
request is even started.
Between the start of the request and the receipt of the response,
the request and its data fields will not change, so there's no
reason we need to hold off setting them. In fact it's preferable
to set them just once because it's more obvious that they're
unchanging.
So set up the fields describing where incoming data is to land in a
response message at the beginning of ceph_osdc_start_request().
Define a helper function that sets these fields, and use it to
set the fields for both outgoing data in the request message and
incoming data in the response.
This resolves:
http://tracker.ceph.com/issues/4284
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Record the number of bytes of data in a page array rather than the
number of pages in the array. It can be assumed that the page array
is of sufficient size to hold the number of bytes indicated (and
offset by the indicated alignment).
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Change it so we only assign outgoing data information for messages
if there is outgoing data to send.
This then allows us to add a few more (currently commented-out)
assertions.
This is related to:
http://tracker.ceph.com/issues/4284
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
Define ceph_msg_data_set_pagelist(), ceph_msg_data_set_bio(), and
ceph_msg_data_set_trail() to clearly abstract the assignment of the
remaining data-related fields in a ceph message structure. Use the
new functions in the osd client and mds client.
This partially resolves:
http://tracker.ceph.com/issues/4263
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
When setting page array information for message data, provide the
byte length rather than the page count ceph_msg_data_set_pages().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a function ceph_msg_data_set_pages(), which more clearly
abstracts the assignment page-related fields for data in a ceph
message structure. Use this new function in the osd client and mds
client.
Ideally, these fields would never be set more than once (with
BUG_ON() calls to guarantee that). At the moment though the osd
client sets these every time it receives a message, and in the event
of a communication problem this can happen more than once. (This
will be resolved shortly, but setting up these helpers first makes
it all a bit easier to work with.)
Rearrange the field order in a ceph_msg structure to group those
that are used to define the possible data payloads.
This partially resolves:
http://tracker.ceph.com/issues/4263
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Record the byte count for an osd request rather than the page count.
The number of pages can always be derived from the byte count (and
alignment/offset) but the reverse is not true.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Rather than explicitly initializing many fields to 0, NULL, or false
in a newly-allocated message, just use kzalloc() for allocating new
messages. This will become a much more convenient way of doing
things anyway for upcoming patches that abstract the data field.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
While processing an outgoing pagelist (either the data pagelist or
trail) in a ceph message, the messenger cycles through each of the
pages on the list. This is accomplished in out_msg_pos_next(), if
the end of the first page on the list is reached, the first page is
moved to the end of the list.
There is a list operation, list_rotate_left(), which performs
exactly this operation, and by using it, what's really going on
becomes more obvious.
So replace these two list_move_tail() calls with list_rotate_left().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Define a new function in_msg_pos_next() to match out_msg_pos_next(),
and use it in place of code at the end of read_partial_message_pages()
and read_partial_message_bio().
Note that the page number is incremented and offset reset under
slightly different conditions from before. The result is
equivalent, however, as explained below.
Each time an incoming message is going to arrive, we find out how
much room is left--not surpassing the current page--and provide that
as the number of bytes to receive. So the amount we'll use is the
lesser of: all that's left of the entire request; and all that's
left in the current page.
If we received exactly how many were requested, we either reached
the end of the request or the end of the page. In the first case,
we're done, in the second, we move onto the next page in the array.
In all cases but (possibly) on the last page, after adding the
number of bytes received, page_pos == PAGE_SIZE. On the last page,
it doesn't really matter whether we increment the page number and
reset the page position, because we're done and we won't come back
here again. The code previously skipped over that last case,
basically. The new code handles that case the same as the others,
incrementing and resetting.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
There is only one caller for read_partial_message_bio(), and it
always passes &msg->bio_iter and &bio_seg as the second and third
arguments. Furthermore, the message in question is always the
connection's in_msg, and we can get that inside the called function.
So drop those two parameters and use their derived equivalents.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Change the type of the "more" parameter from int to bool.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Some values printed are not (necessarily) in CPU order. We already
have a copy of the converted versions, so use them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
This is probably unnecessary but the code read as if it were wrong
in read_partial_message().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
In ceph_con_in_msg_alloc() it is possible for a connection's
alloc_msg method to indicate an incoming message should be skipped.
By default, read_partial_message() initializes the skip variable
to 0 before it gets provided to ceph_con_in_msg_alloc().
The osd client, mon client, and mds client each supply an alloc_msg
method. The mds client always assigns skip to be 0.
The other two leave the skip value of as-is, or assigns it to zero,
except:
- if no (osd or mon) request having the given tid is found, in
which case skip is set to 1 and NULL is returned; or
- in the osd client, if the data of the reply message is not
adequate to hold the message to be read, it assigns skip
value 1 and returns NULL.
So the returned message pointer will always be NULL if skip is ever
non-zero.
Clean up the logic a bit in ceph_con_in_msg_alloc() to make this
state of affairs more obvious. Add a comment explaining how a null
message pointer can mean either a message that should be skipped or
a problem allocating a message.
This resolves:
http://tracker.ceph.com/issues/4324
Reported-by: Greg Farnum <greg@inktank.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
An osd request defines information about where data to be read
should be placed as well as where data to write comes from.
Currently these are represented by common fields.
Keep information about data for writing separate from data to be
read by splitting these into data_in and data_out fields.
This is the key patch in this whole series, in that it actually
identifies which osd requests generate outgoing data and which
generate incoming data. It's less obvious (currently) that an osd
CALL op generates both outgoing and incoming data; that's the focus
of some upcoming work.
This resolves:
http://tracker.ceph.com/issues/4127
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request uses either pages or a bio list for its data. Use a
union to record information about the two, and add a data type
tag to select between them.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull the fields in an osd request structure that define the data for
the request out into a separate structure.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Currently ceph_osdc_new_request() assigns an osd request's
r_num_pages and r_alignment fields. The only thing it does
after that is call ceph_osdc_build_request(), and that doesn't
need those fields to be assigned.
Move the assignment of those fields out of ceph_osdc_new_request()
and into its caller. As a result, the page_align parameter is no
longer used, so get rid of it.
Note that in ceph_sync_write(), the value for req->r_num_pages had
already been calculated earlier (as num_pages, and fortunately
it was computed the same way). So don't bother recomputing it,
but because it's not needed earlier, move that calculation after the
call to ceph_osdc_new_request(). Hold off making the assignment to
r_alignment, doing it instead r_pages and r_num_pages are
getting set.
Similarly, in start_read(), nr_pages already holds the number of
pages in the array (and is calculated the same way), so there's no
need to recompute it. Move the assignment of the page alignment
down with the others there as well.
This and the next few patches are preparation work for:
http://tracker.ceph.com/issues/4127
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only user of the ceph messenger that doesn't define an alloc_msg
method is the mds client. Define one, such that it works just like
it did before, and simplify ceph_con_in_msg_alloc() by assuming the
alloc_msg method is always present.
This and the next patch resolve:
http://tracker.ceph.com/issues/4322
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
In ceph_con_in_msg_alloc(), if no alloc_msg method is defined for a
connection a new message is allocated with ceph_msg_new().
Drop the mutex before making this call, and make sure we're still
connected when we get it back again.
This is preparing for the next patch, which ensures all connections
define an alloc_msg method, and then handles them all the same way.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Greg Farnum <greg@inktank.com>
The purpose of ceph_calc_object_layout() is to fill in the pool
number and seed for a ceph_pg structure provided, based on a given
osd map and target object id.
Currently that function takes a file layout parameter, but the only
thing used out of that is its pool number.
Change the function so it takes a pool number rather than the full
file layout structure. Only update the ceph_pg if the pool is found
in the osd map. Get rid of few useless lines of code from the
function while there.
Since the function now very clearly just fills in the ceph_pg
structure it's provided, rename it ceph_calc_ceph_pg().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The pagelist_count field is never actually used, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The new cases added to osd_req_encode_op() caused a new sparse
error, which highlighted an existing problem that had been
overlooked since it was originally checked in. When an unsupported
opcode is found the destination rather than the source opcode was
being used in the error message. The two differ in their byte
order, and we want to be using the one in the source.
Fix the problem in both spots.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
An osd request marked to linger will be re-submitted in the event
a connection to the target osd gets dropped. Currently, if there
is a callback function associated with a request it will be called
each time a request is submitted--which for lingering requests can
be more than once.
Change it so a request--including lingering ones--will get completed
(from the perspective of the user of the osd client) exactly once.
This resolves:
http://tracker.ceph.com/issues/3967
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The page alignment field for a request is currently set in
ceph_osdc_build_request(). It's not needed at that point
nor do either of its callers need that value assigned at
any point before they call ceph_osdc_start_request().
So move that assignment into ceph_osdc_start_request().
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Use distinct fields for tracking the number of pages in a message's
page array and in a message's page list. Currently only one or the
other is used at a time, but that will be changing soon.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The only remaining reason to pass the osd request to calc_layout()
is to fill in its r_num_pages and r_page_alignment fields. Once it
fills those in, it doesn't do anything more with them.
We can therefore move those assignments into the caller, and get rid
of the "req" parameter entirely.
Note, however, that the only caller is ceph_osdc_new_request(),
and that immediately overwrites those fields with values based on
its passed-in page offset. So the assignment inside calc_layout()
was redundant anyway.
This resolves:
http://tracker.ceph.com/issues/4262
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Move the formatting of the object name (oid) to use for an object
request into the caller of calc_layout(). This makes the "vino"
parameter no longer necessary, so get rid of it.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Have calc_layout() pass the computed object number back to its
caller. (This is a small step to simplify review.)
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
The bio_seg field is used by the ceph messenger in iterating through
a bio. It should never have a negative value, so make it an
unsigned. (I contemplated making it unsigned short to match the
struct bio definition, but it offered no benefit.)
Change variables used to hold bio_seg values to all be unsigned as
well. Change two variable names in init_bio_iter() to match the
convention used everywhere else.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
If an invalid layout is provided to ceph_osdc_new_request(), its
call to calc_layout() might return an error. At that point in the
function we've already allocated an osd request structure, so we
need to free it (drop a reference) in the event such an error
occurs.
The only other value calc_layout() will return is 0, so make that
explicit in the successful case.
This resolves:
http://tracker.ceph.com/issues/4240
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
Pull VFS updates from Al Viro,
Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).
7kloc removed.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
don't bother with deferred freeing of fdtables
proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
proc: Make the PROC_I() and PDE() macros internal to procfs
proc: Supply a function to remove a proc entry by PDE
take cgroup_open() and cpuset_open() to fs/proc/base.c
ppc: Clean up scanlog
ppc: Clean up rtas_flash driver somewhat
hostap: proc: Use remove_proc_subtree()
drm: proc: Use remove_proc_subtree()
drm: proc: Use minor->index to label things, not PDE->name
drm: Constify drm_proc_list[]
zoran: Don't print proc_dir_entry data in debug
reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
proc: Supply an accessor for getting the data from a PDE's parent
airo: Use remove_proc_subtree()
rtl8192u: Don't need to save device proc dir PDE
rtl8187se: Use a dir under /proc/net/r8180/
proc: Add proc_mkdir_data()
proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
proc: Move PDE_NET() to fs/proc/proc_net.c
...
Split the proc namespace stuff out into linux/proc_ns.h.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: netdev@vger.kernel.org
cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull networking updates from David Miller:
"Highlights (1721 non-merge commits, this has to be a record of some
sort):
1) Add 'random' mode to team driver, from Jiri Pirko and Eric
Dumazet.
2) Make it so that any driver that supports configuration of multiple
MAC addresses can provide the forwarding database add and del
calls by providing a default implementation and hooking that up if
the driver doesn't have an explicit set of handlers. From Vlad
Yasevich.
3) Support GSO segmentation over tunnels and other encapsulating
devices such as VXLAN, from Pravin B Shelar.
4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.
5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
Dukkipati.
6) In the PHY layer, allow supporting wake-on-lan in situations where
the PHY registers have to be written for it to be configured.
Use it to support wake-on-lan in mv643xx_eth.
From Michael Stapelberg.
7) Significantly improve firewire IPV6 support, from YOSHIFUJI
Hideaki.
8) Allow multiple packets to be sent in a single transmission using
network coding in batman-adv, from Martin Hundebøll.
9) Add support for T5 cxgb4 chips, from Santosh Rastapur.
10) Generalize the VXLAN forwarding tables so that there is more
flexibility in configurating various aspects of the endpoints.
From David Stevens.
11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
from Dmitry Kravkov.
12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
Neira Ayuso.
13) Start adding networking selftests.
14) In situations of overload on the same AF_PACKET fanout socket, or
per-cpu packet receive queue, minimize drop by distributing the
load to other cpus/fanouts. From Willem de Bruijn and Eric
Dumazet.
15) Add support for new payload offset BPF instruction, from Daniel
Borkmann.
16) Convert several drivers over to mdoule_platform_driver(), from
Sachin Kamat.
17) Provide a minimal BPF JIT image disassembler userspace tool, from
Daniel Borkmann.
18) Rewrite F-RTO implementation in TCP to match the final
specification of it in RFC4138 and RFC5682. From Yuchung Cheng.
19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
you like netlink, so I implemented netlink dumping of netlink
sockets.") From Andrey Vagin.
20) Remove ugly passing of rtnetlink attributes into rtnl_doit
functions, from Thomas Graf.
21) Allow userspace to be able to see if a configuration change occurs
in the middle of an address or device list dump, from Nicolas
Dichtel.
22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
Frederic Sowa.
23) Increase accuracy of packet length used by packet scheduler, from
Jason Wang.
24) Beginning set of changes to make ipv4/ipv6 fragment handling more
scalable and less susceptible to overload and locking contention,
from Jesper Dangaard Brouer.
25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
instead. From Hong Zhiguo.
26) Optimize route usage in IPVS by avoiding reference counting where
possible, from Julian Anastasov.
27) Convert IPVS schedulers to RCU, also from Julian Anastasov.
28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
Eitzenberger.
29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
nfnetlink_log, and nfnetlink_queue. From Gao feng.
30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.
31) Support several new r8169 chips, from Hayes Wang.
32) Support tokenized interface identifiers in ipv6, from Daniel
Borkmann.
33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.
34) Add 802.1ad vlan offload support, from Patrick McHardy.
35) Support mmap() based netlink communication, also from Patrick
McHardy.
36) Support HW timestamping in mlx4 driver, from Amir Vadai.
37) Rationalize AF_PACKET packet timestamping when transmitting, from
Willem de Bruijn and Daniel Borkmann.
38) Bring parity to what's provided by /proc/net/packet socket dumping
and the info provided by netlink socket dumping of AF_PACKET
sockets. From Nicolas Dichtel.
39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
Poirier"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
filter: fix va_list build error
af_unix: fix a fatal race with bit fields
bnx2x: Prevent memory leak when cnic is absent
bnx2x: correct reading of speed capabilities
net: sctp: attribute printl with __printf for gcc fmt checks
netlink: kconfig: move mmap i/o into netlink kconfig
netpoll: convert mutex into a semaphore
netlink: Fix skb ref counting.
net_sched: act_ipt forward compat with xtables
mlx4_en: fix a build error on 32bit arches
Revert "bnx2x: allow nvram test to run when device is down"
bridge: avoid OOPS if root port not found
drivers: net: cpsw: fix kernel warn on cpsw irq enable
sh_eth: use random MAC address if no valid one supplied
3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
tg3: fix to append hardware time stamping flags
unix/stream: fix peeking with an offset larger than data in queue
unix/dgram: fix peeking with an offset larger than data in queue
unix/dgram: peek beyond 0-sized skbs
openvswitch: Remove unneeded ovs_netdev_get_ifindex()
...
Using bit fields is dangerous on ppc64/sparc64, as the compiler [1]
uses 64bit instructions to manipulate them.
If the 64bit word includes any atomic_t or spinlock_t, we can lose
critical concurrent changes.
This is happening in af_unix, where unix_sk(sk)->gc_candidate/
gc_maybe_cycle/lock share the same 64bit word.
This leads to fatal deadlock, as one/several cpus spin forever
on a spinlock that will never be available again.
A safer way would be to use a long to store flags.
This way we are sure compiler/arch wont do bad things.
As we own unix_gc_lock spinlock when clearing or setting bits,
we can use the non atomic __set_bit()/__clear_bit().
recursion_level can share the same 64bit location with the spinlock,
as it is set only with this spinlock held.
[1] bug fixed in gcc-4.8.0 :
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=52080
Reported-by: Ambrose Feinstein <ambrose@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let GCC check for format string errors in sctp's probe printl
function. This patch fixes the warning when compiled with W=1:
net/sctp/probe.c:73:2: warning: function might be possible candidate
for 'gnu_printf' format attribute [-Wmissing-format-attribute]
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, in menuconfig, Netlink's new mmaped IO is the very first
entry under the ``Networking support'' item and comes even before
``Networking options'':
[ ] Netlink: mmaped IO
Networking options --->
...
Lets move this into ``Networking options'' under netlink's Kconfig,
since this might be more appropriate. Introduced by commit ccdfcc398
(``netlink: mmaped netlink: ring setup'').
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bart Van Assche recently reported a warning to me:
<IRQ> [<ffffffff8103d79f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8103d7fa>] warn_slowpath_null+0x1a/0x20
[<ffffffff814761dd>] mutex_trylock+0x16d/0x180
[<ffffffff813968c9>] netpoll_poll_dev+0x49/0xc30
[<ffffffff8136a2d2>] ? __alloc_skb+0x82/0x2a0
[<ffffffff81397715>] netpoll_send_skb_on_dev+0x265/0x410
[<ffffffff81397c5a>] netpoll_send_udp+0x28a/0x3a0
[<ffffffffa0541843>] ? write_msg+0x53/0x110 [netconsole]
[<ffffffffa05418bf>] write_msg+0xcf/0x110 [netconsole]
[<ffffffff8103eba1>] call_console_drivers.constprop.17+0xa1/0x1c0
[<ffffffff8103fb76>] console_unlock+0x2d6/0x450
[<ffffffff8104011e>] vprintk_emit+0x1ee/0x510
[<ffffffff8146f9f6>] printk+0x4d/0x4f
[<ffffffffa0004f1d>] scsi_print_command+0x7d/0xe0 [scsi_mod]
This resulted from my commit ca99ca14c which introduced a mutex_trylock
operation in a path that could execute in interrupt context. When mutex
debugging is enabled, the above warns the user when we are in fact
exectuting in interrupt context
interrupt context.
After some discussion, It seems that a semaphore is the proper mechanism to use
here. While mutexes are defined to be unusable in interrupt context, no such
condition exists for semaphores (save for the fact that the non blocking api
calls, like up and down_trylock must be used when in irq context).
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
CC: Bart Van Assche <bvanassche@acm.org>
CC: David Miller <davem@davemloft.net>
CC: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f9c2288837 (netlink:
implement memory mapped recvmsg) increamented skb->users
ref count twice for a dump op which does not look right.
Following patch fixes that.
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Deal with changes in newer xtables while maintaining backward
compatibility. Thanks to Jan Engelhardt for suggestions.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bridge can crash while trying to send topology change packet.
This happens if root port can't be found. This was reported by user
but currently unable to reproduce it easily. The STP conditions that cause
this are not known yet, but the problem doesn't have to be fatal.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- NLM: stable fix for NFSv2/v3 blocking locks
- NFSv4.x: stable fixes for the delegation recall error handling code
- NFSv4.x: Security flavour negotiation fixes and cleanups by Chuck Lever
- SUNRPC: A number of RPCSEC_GSS fixes and cleanups also from Chuck
- NFSv4.x assorted state management and reboot recovery bugfixes
- NFSv4.1: In cases where we have already looked up a file, and hold a
valid filehandle, use the new open-by-filehandle operation instead of
opening by name.
- Allow the NFSv4.1 callback thread to freeze
- NFSv4.x: ensure that file unlock waits for readahead to complete
- NFSv4.1: ensure that the RPC layer doesn't override the NFS session
table size negotiation by limiting the number of slots.
- NFSv4.x: Fix SETATTR spec compatibility issues
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=Hgot
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes and cleanups from Trond Myklebust:
- NLM: stable fix for NFSv2/v3 blocking locks
- NFSv4.x: stable fixes for the delegation recall error handling code
- NFSv4.x: Security flavour negotiation fixes and cleanups by Chuck
Lever
- SUNRPC: A number of RPCSEC_GSS fixes and cleanups also from Chuck
- NFSv4.x assorted state management and reboot recovery bugfixes
- NFSv4.1: In cases where we have already looked up a file, and hold a
valid filehandle, use the new open-by-filehandle operation instead of
opening by name.
- Allow the NFSv4.1 callback thread to freeze
- NFSv4.x: ensure that file unlock waits for readahead to complete
- NFSv4.1: ensure that the RPC layer doesn't override the NFS session
table size negotiation by limiting the number of slots.
- NFSv4.x: Fix SETATTR spec compatibility issues
* tag 'nfs-for-3.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (67 commits)
NFSv4: Warn once about servers that incorrectly apply open mode to setattr
NFSv4: Servers should only check SETATTR stateid open mode on size change
NFSv4: Don't recheck permissions on open in case of recovery cached open
NFSv4.1: Don't do a delegated open for NFS4_OPEN_CLAIM_DELEG_CUR_FH modes
NFSv4.1: Use the more efficient open_noattr call for open-by-filehandle
NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE
NFSv4: Ensure that we clear the NFS_OPEN_STATE flag when appropriate
LOCKD: Ensure that nlmclnt_block resets block->b_status after a server reboot
NFSv4: Ensure the LOCK call cannot use the delegation stateid
NFSv4: Use the open stateid if the delegation has the wrong mode
nfs: Send atime and mtime as a 64bit value
NFSv4: Record the OPEN create mode used in the nfs4_opendata structure
NFSv4.1: Set the RPC_CLNT_CREATE_INFINITE_SLOTS flag for NFSv4.1 transports
SUNRPC: Allow rpc_create() to request that TCP slots be unlimited
SUNRPC: Fix a livelock problem in the xprt->backlog queue
NFSv4: Fix handling of revoked delegations by setattr
NFSv4 release the sequence id in the return on close case
nfs: remove unnecessary check for NULL inode->i_flock from nfs_delegation_claim_locks
NFS: Ensure that NFS file unlock waits for readahead to complete
NFS: Add functionality to allow waiting on all outstanding reads to complete
...
Conflicts:
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
drivers/net/ethernet/emulex/benet/be.h
include/net/tcp.h
net/mac802154/mac802154.h
Most conflicts were minor overlapping stuff.
The be2net driver brought in some fixes that added __vlan_put_tag
calls, which in net-next take an additional argument.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, peeking on a unix stream socket with an offset larger than len of
the data in the sk receive queue returns immediately with bogus data.
This patch fixes this so that the behavior is the same as peeking with no
offset on an empty queue: the caller blocks.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, peeking on a unix datagram socket with an offset larger than len of
the data in the sk receive queue returns immediately with bogus data. That's
because *off is not reset between each skb_queue_walk().
This patch fixes this so that the behavior is the same as peeking with no
offset on an empty queue: the caller blocks.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
"77c1090 net: fix infinite loop in __skb_recv_datagram()" (v3.8) introduced a
regression:
After that commit, recv can no longer peek beyond a 0-sized skb in the queue.
__skb_recv_datagram() instead stops at the first skb with len == 0 and results
in the system call failing with -EFAULT via skb_copy_datagram_iovec().
When peeking at an offset with 0-sized skb(s), each one of those is received
only once, in sequence. The offset starts moving forward again after receiving
datagrams with len > 0.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The only user is get_dpifindex(), no need to redirect via the port
operations.
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use consume_skb() to free the original skb that is successfully transmitted
as gso segmented skbs so that it is not treated as a drop due to an error.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove duplicate statements by using do-while loop instead of while loop.
- A;
- while (e) {
+ do {
A;
- }
+ } while (e);
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use preferable function name which implies using a pseudo-random
number generator.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are at least two users of isodigit(). Let's make it a public
function of ctype.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Note conflict: Chuck's patches modified (and made static)
gss_mech_get_by_OID, which is still needed by gss-proxy patches.
The conflict resolution is a bit minimal; we may want some more cleanup.
Don't use create_proc_read_entry() as that is deprecated, but rather use
proc_create_data() and seq_file instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cc: Jouni Malinen <j@w1.fi>
cc: John W. Linville <linville@tuxdriver.com>
cc: Johannes Berg <johannes@sipsolutions.net>
cc: linux-wireless@vger.kernel.org
cc: netdev@vger.kernel.org
cc: devel@driverdev.osuosl.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Here's the big tty/serial driver merge request for 3.10-rc1
Once again, Jiri has a number of TTY driver fixes and cleanups, and
Peter Hurley came through with a bunch of ldisc fixes that resolve a
number of reported issues. There are some other serial driver cleanups
as well.
All of these have been in the linux-next tree for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iEYEABECAAYFAlF+nSMACgkQMUfUDdst+ymy9QCfRmYn0MC0W+Q1D3Spz87gVsuo
cqEAniu1BEkYZpjAz7ZlIN07Ao0jbQOR
=Osu/
-----END PGP SIGNATURE-----
Merge tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver update from Greg Kroah-Hartman:
"Here's the big tty/serial driver merge request for 3.10-rc1
Once again, Jiri has a number of TTY driver fixes and cleanups, and
Peter Hurley came through with a bunch of ldisc fixes that resolve a
number of reported issues. There are some other serial driver
cleanups as well.
All of these have been in the linux-next tree for a while"
* tag 'tty-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (117 commits)
tty/serial/sirf: fix MODULE_DEVICE_TABLE
serial: mxs: drop superfluous {get|put}_device
serial: mxs: fix buffer overflow
ARM: PL011: add support for extended FIFO-size of PL011-r1p5
serial_core.c: add put_device() after device_find_child()
tty: Fix unsafe bit ops in tty_throttle_safe/unthrottle_safe
serial: sccnxp: Replace pdata.init/exit with regulator API
serial: sccnxp: Do not override device name
TTY: pty, fix compilation warning
TTY: rocket, fix compilation warning
TTY: ircomm: fix DTR being raised on hang up
TTY: synclinkmp: fix DTR being raised on hang up
TTY: synclink_gt: fix DTR being raised on hang up
TTY: synclink: fix DTR being raised on hang up
serial: 8250_dw: Fix the stub for dw8250_probe_acpi()
serial: 8250_dw: Convert to devm_ioremap()
serial: 8250_dw: Set port capabilities based on CPR register
serial: 8250_dw: Let ACPI code extract the DMA client info
serial: 8250_dw: Support clk framework also with ACPI
serial: 8250_dw: Enable runtime PM
...
Linux immediately returns SYNACK on (spurious) SYN retransmits, but
keeps the SYNACK timer running independently. Thus the timer may
fire right after the SYNACK retransmit and causes a SYN-SYNACK
cross-fire burst.
Adopt the fast retransmit/recovery idea in established state by
re-arming the SYNACK timer after the fast (SYNACK) retransmit. The
timer may fire late up to 500ms due to the current SYNACK timer wheel,
but it's OK to be conservative when network is congested. Eric's new
listener design should address this issue.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add MIB counters for checksum errors in IP layer,
and TCP/UDP/ICMP layers, to help diagnose problems.
$ nstat -a | grep Csum
IcmpInCsumErrors 72 0.0
TcpInCsumErrors 382 0.0
UdpInCsumErrors 463221 0.0
Icmp6InCsumErrors 75 0.0
Udp6InCsumErrors 173442 0.0
IpExtInCsumErrors 10884 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of feeding net_secret[] at boot time, defer the init
at the point first socket is created.
This permits some platforms to use better entropy sources than
the ones available at boot time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- One patch for moving the LLCP code into net/nfc.
It fixes a build annoyance reported by Dave Miller caused by the fact
that the LLCP code object targets are not in the same directory as the
Makefile trying to build them is. It prevents us from doing e.g.
make net/nfc/llcp/sock.o
Moving the LLCP code into net/nfc and not making it optional anymore
makes sense as LLCP is a fundamental piece of the NFC specifications
and thus should be in the core NFC directory.
- One patch that fixes the missing dependency against RFKILL. Without it NFC
fails to properly build when it's builtin and CONFIG_RFKILL=m.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=8VFM
-----END PGP SIGNATURE-----
Merge tag 'nfc-next-3.10-4' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next
Samuel Ortiz <sameo@linux.intel.com> says:
"With this one we have:
- One patch for moving the LLCP code into net/nfc.
It fixes a build annoyance reported by Dave Miller caused by the fact
that the LLCP code object targets are not in the same directory as the
Makefile trying to build them is. It prevents us from doing e.g.
make net/nfc/llcp/sock.o
Moving the LLCP code into net/nfc and not making it optional anymore
makes sense as LLCP is a fundamental piece of the NFC specifications
and thus should be in the core NFC directory.
- One patch that fixes the missing dependency against RFKILL. Without it NFC
fails to properly build when it's builtin and CONFIG_RFKILL=m."
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Pablo Neira Ayuso says:
====================
The following patchset contains relevant updates for the Netfilter
tree, they are:
* Enhancements for ipset: Add the counter extension for sets, this
information can be used from the iptables set match, to change
the matching behaviour. Jozsef required to add the extension
infrastructure and moved the existing timeout support upon it.
This also includes a change in net/sched/em_ipset to adapt it to
the new extension structure.
* Enhancements for performance boosting in nfnetlink_queue: Add new
configuration flags that allows user-space to receive big packets (GRO)
and to disable checksumming calculation. This were proposed by Eric
Dumazet during the Netfilter Workshop 2013 in Copenhagen. Florian
Westphal was kind enough to find the time to materialize the proposal.
* A sparse fix from Simon, he noticed it in the SCTP NAT helper, the fix
required a change in the interface of sctp_end_cksum.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the type of the crc32 parameter of sctp_end_cksum()
from __be32 to __u32 to reflect that fact that it is passed
to cpu_to_le32().
There are five in-tree users of sctp_end_cksum().
The following four had warnings flagged by sparse which are
no longer present with this change.
net/netfilter/ipvs/ip_vs_proto_sctp.c:sctp_nat_csum()
net/netfilter/ipvs/ip_vs_proto_sctp.c:sctp_csum_check()
net/sctp/input.c:sctp_rcv_checksum()
net/sctp/output.c:sctp_packet_transmit()
The fifth user is net/netfilter/nf_nat_proto_sctp.c:sctp_manip_pkt().
It has been updated to pass a __u32 instead of a __be32,
the value in question was already calculated in cpu byte-order.
net/netfilter/nf_nat_proto_sctp.c:sctp_manip_pkt() has also
been updated to assign the return value of sctp_end_cksum()
directly to a variable of type __le32, matching the
type of the return value. Previously the return value
was assigned to a variable of type __be32 and then that variable
was finally assigned to another variable of type __le32.
Problems flagged by sparse.
Compile and sparse tested only.
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Userspace can now indicate that it can cope with larger-than-mtu sized
packets and packets that have invalid ipv4/tcp checksums.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Once we allow userspace to receive gso/gro packets, userspace
needs to be able to determine when checksums appear to be
broken, but are not.
NFQA_SKB_CSUMNOTREADY means 'checksums will be fixed in kernel
later, pretend they are ok'.
NFQA_SKB_GSO could be used for statistics, or to determine when
packet size exceeds mtu.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
skb_gso_segment is expensive, so it would be nice if we could
avoid it in the future. However, userspace needs to be prepared
to receive larger-than-mtu-packets (which will also have incorrect
l3/l4 checksums), so we cannot simply remove it.
The plan is to add a per-queue feature flag that userspace can
set when binding the queue.
The problem is that in nf_queue, we only have a queue number,
not the queue context/configuration settings.
This patch should have no impact other than the skb_gso_segment
call now being in a function that has access to the queue config
data.
A new size attribute in nf_queue_entry is needed so
nfnetlink_queue can duplicate the entry of the gso skb
when segmenting the skb while also copying the route key.
The follow up patch adds switch to disable skb_gso_segment when
queue config says so.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
required by future patch that will need to duplicate the
nf_queue_entry, bumping refcounts of the copy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The new revision of the set match supports to match the counters
and to suppress updating the counters at matching too.
At the set:list types, the updating of the subcounters can be
suppressed as well.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Introduce extensions to elements in the core and prepare timeout as
the first one.
This patch also modifies the em_ipset classifier to use the new
extension struct layout.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Following patch adds icmp-registration module for ipv6. It allows
ipv6 protocol to register icmp_sender which is used for sending
ipv6 icmp msgs. This extra layer allows us to kill ipv6 dependency
for sending icmp packets.
This patch also fixes ip_tunnel compilation problem when ip_tunnel
is statically compiled in kernel but ipv6 is module
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows to dump BPF filters attached to a socket with
SO_ATTACH_FILTER.
Note that we check CAP_SYS_ADMIN before allowing to dump this info.
For now, only AF_PACKET sockets use this feature.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_rmem_alloc is disclosed via /proc/net/packet but not via netlink messages.
The goal is to have the same level of information.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This value is disclosed via /proc/net/packet but not via netlink messages.
The goal is to have the same level of information.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change MAC802154_CHAN_NONE from ~(u8)0 to 0xff, or the comparison in
mac802154_wpan_xmit() for ``chan == MAC802154_CHAN_NONE'' will not
succeed.
This bug can be boiled down to ``u8 foo = 0xff; if (foo == ~(u8)0)
[...] else [...]'' where the condition will always take the else
branch.
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current bridge fdb update code does not seem to update the port
during fdb update. This patch adds a check for fdb dst (port)
change during fdb update. Also rearranges the call to
fdb_notify to send only one notification for create and update.
Changelog:
v2 - Change notify flag to bool
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
'attrbuf' is malloced in genl_family_rcv_msg() when family->maxattr &&
family->parallel_ops, thus should be freed before leaving from the error
handling cases, otherwise it will cause memory leak.
Introduced by commit def3117493
(genl: Allow concurrent genl callbacks.)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the NFC subsystem gained RFKILL support, it needs to be able
to build properly with whatever option for RFKILL has been selected.
on i386:
net/built-in.o: In function `nfc_unregister_device':
(.text+0x6a36d): undefined reference to `rfkill_unregister'
net/built-in.o: In function `nfc_unregister_device':
(.text+0x6a378): undefined reference to `rfkill_destroy'
net/built-in.o: In function `nfc_register_device':
(.text+0x6a493): undefined reference to `rfkill_alloc'
net/built-in.o: In function `nfc_register_device':
(.text+0x6a4a4): undefined reference to `rfkill_register'
net/built-in.o: In function `nfc_register_device':
(.text+0x6a4b3): undefined reference to `rfkill_destroy'
net/built-in.o: In function `nfc_dev_up':
(.text+0x6a8e8): undefined reference to `rfkill_blocked'
when CONFIG_RFKILL=m but NFC is builtin.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The main advantge of this new upcall mechanism is that it can handle
big tickets as seen in Kerberos implementations where tickets carry
authorization data like the MS-PAC buffer with AD or the Posix Authorization
Data being discussed in IETF on the krbwg working group.
The Gssproxy program is used to perform the accept_sec_context call on the
kernel's behalf. The code is changed to also pass the input buffer straight
to upcall mechanism to avoid allocating and copying many pages as tokens can
be as big (potentially more in future) as 64KiB.
Signed-off-by: Simo Sorce <simo@redhat.com>
[bfields: containerization, negotiation api]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This patch implements a sunrpc client to use the services of the gssproxy
userspace daemon.
In particular it allows to perform calls in user space using an RPC
call instead of custom hand-coded upcall/downcall messages.
Currently only accept_sec_context is implemented as that is all is needed for
the server case.
File server modules like NFS and CIFS can use full gssapi services this way,
once init_sec_context is also implemented.
For the NFS server case this code allow to lift the limit of max 2k krb5
tickets. This limit is prevents legitimate kerberos deployments from using krb5
authentication with the Linux NFS server as they have normally ticket that are
many kilobytes large.
It will also allow to lift the limitation on the size of the credential set
(uid,gid,gids) passed down from user space for users that have very many groups
associated. Currently the downcall mechanism used by rpc.svcgssd is limited
to around 2k secondary groups of the 65k allowed by kernel structures.
Signed-off-by: Simo Sorce <simo@redhat.com>
[bfields: containerization, concurrent upcalls, misc. fixes and cleanup]
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
We expose this parameter for a future caller.
It will be used to extract the endtime from the gss-proxy upcall mechanism,
in order to set the rsc cache expiration time.
Signed-off-by: Simo Sorce <simo@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the gss-proxy case we don't want to have to reconnect at random--we
want to connect only on gss-proxy startup when we can steal gss-proxy's
context to do the connect in the right namespace.
So, provide a flag that allows the rpc_create caller to turn off the
idle timeout.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
In the gss-proxy case, setup time is when I know I'll have the right
namespace for the connect.
In other cases, it might be useful to get any connection errors
earlier--though actually in practice it doesn't make any difference for
rpcbind.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Merging Trond's nfs-for-next branch, mainly to get
b7993cebb8 "SUNRPC: Allow rpc_create() to
request that TCP slots be unlimited", which a small piece of the
gss-proxy work depends on.
And stop making it optional. LLCP is a fundamental part of the NFC
specifications and making it optional does not make much sense.
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Now that CryptoAPI has support for CMAC, we can add support for AES-CMAC-96
(rfc4494).
Cc: Tom St Denis <tstdenis@elliptictech.com>
Signed-off-by: Jussi Kivilinna <jussi.kivilinna@iki.fi>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If gcc (e.g. 4.1.2) decides not to inline vsock_init_tables(), this will
cause a section mismatch:
WARNING: net/vmw_vsock/vsock.o(.text+0x1bc): Section mismatch in reference from the function __vsock_core_init() to the function .init.text:vsock_init_tables()
The function __vsock_core_init() references
the function __init vsock_init_tables().
This is often because __vsock_core_init lacks a __init
annotation or the annotation of vsock_init_tables is wrong.
This may cause crashes if VSOCKETS=y and VMWARE_VMCI_VSOCKETS=m.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we call vsock_core_init to init VSOCK the second time,
vsock_device.minor still points to the old dynamically allocated minor
number. misc_register will allocate it for us successfully as if we were
asking for a static one. However, when other user call misc_register to
allocate a dynamic minor number, it will give the one used by
vsock_core_init(), causing this:
[ 405.470687] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0xcc/0xf0()
[ 405.470689] Hardware name: OptiPlex 790
[ 405.470690] sysfs: cannot create duplicate filename '/dev/char/10:54'
Always set vsock_device.minor to MISC_DYNAMIC_MINOR before we
register.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Andy King <acking@vmware.com>
Cc: Dmitry Torokhov <dtor@vmware.com>
Cc: Reilly Grant <grantr@vmware.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6681712d67
vxlan: generalize forwarding tables
relaxed the address checks in rtnl_fdb_del() to use is_zero_ether_addr().
This allows users to add multicast addresses using the fdb API. However,
the check in rtnl_fdb_del() still uses a more strict
is_valid_ether_addr() which rejects multicast addresses. Thus it
is possible to add an fdb that can not be later removed.
Relax the check in rtnl_fdb_del() as well.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Need remove erroneous semicolon, which is found by EXTRA_CFLAGS=-W,
the related commit number: c544193214
("GRE: Refactor GRE tunneling code")
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sockaddr_nfc_llcp struct has as hole between ->sa_family and
->dev_idx so I've added a memset() to clear it and prevent an
information leak.
Also the ->nfc_protocol element wasn't set so I've added that.
"uaddr->sa_family" and "llcp_addr->sa_family" are the same thing but
it's less confusing to use llcp_addr consistently throughout.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sockaddr_ax25 struct has a 3 byte hole between ->sax25_call and
->sax25_ndigis. I've added a memset to avoid leaking uninitialized
stack data to userspace.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a one byte hole between ->sat_port and ->sat_addr.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OVS locking was recently changed to have private OVS lock which
simplified overall locking. Therefore there is no need to have
another global genl lock to protect OVS data structures. Following
patch uses of parallel_ops genl family for OVS. This also allows
more granual OVS locking using ovs_mutex for protecting OVS data
structures, which gives more concurrencey. E.g multiple genl
operations OVS_PACKET_CMD_EXECUTE can run in parallel, etc.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All genl callbacks are serialized by genl-mutex. This can become
bottleneck in multi threaded case.
Following patch adds an parameter to genl_family so that a
particular family can get concurrent netlink callback without
genl_lock held.
New rw-sem is used to protect genl callback from genl family unregister.
in case of parallel_ops genl-family read-lock is taken for callbacks and
write lock is taken for register or unregistration for any family.
In case of locked genl family semaphore and gel-mutex is locked for
any openration.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 068a2de57d (net: release dst entry while
cache-hot for GSO case too)
Before GSO packet segmentation, we already take care of skb->dst if it
can be released.
There is no point adding extra test for every segment in the gso loop.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, packet_sock has a struct tpacket_stats stats member for
TPACKET_V1 and TPACKET_V2 statistic accounting, and with TPACKET_V3
``union tpacket_stats_u stats_u'' was introduced, where however only
statistics for TPACKET_V3 are held, and when copied to user space,
TPACKET_V3 does some hackery and access also tpacket_stats' stats,
although everything could have been done within the union itself.
Unify accounting within the tpacket_stats_u union so that we can
remove 8 bytes from packet_sock that are there unnecessary. Note that
even if we switch to TPACKET_V3 and would use non mmap(2)ed option,
this still works due to the union with same types + offsets, that are
exposed to the user space.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a 4 byte hole in packet_ring_buffer structure before
prb_bdqc, that can be filled with 'pending' member, thus we can
reduce the overall structure size from 224 bytes to 216 bytes.
This also has the side-effect, that in struct packet_sock 2*4 byte
holes after the embedded packet_ring_buffer members are removed,
and overall, packet_sock can be reduced by 1 cacheline:
Before: size: 1344, cachelines: 21, members: 24
After: size: 1280, cachelines: 20, members: 24
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, there is no way to find out which timestamp is reported in
tpacket{,2,3}_hdr's tp_sec, tp_{n,u}sec members. It can be one of
SOF_TIMESTAMPING_SYS_HARDWARE, SOF_TIMESTAMPING_RAW_HARDWARE,
SOF_TIMESTAMPING_SOFTWARE, or a fallback variant late call from the
PF_PACKET code in software.
Therefore, report in the tp_status member of the ring buffer which
timestamp has been reported for RX and TX path. This should not break
anything for the following reasons: i) in RX ring path, the user needs
to test for tp_status & TP_STATUS_USER, and later for other flags as
well such as TP_STATUS_VLAN_VALID et al, so adding other flags will
do no harm; ii) in TX ring path, time stamps with PACKET_TIMESTAMP
socketoption are not available resp. had no effect except that the
application setting this is buggy. Next to TP_STATUS_AVAILABLE, the
user also should check for other flags such as TP_STATUS_WRONG_FORMAT
to reclaim frames to the application. Thus, in case TX ts are turned
off (default case), nothing happens to the application logic, and in
case we want to use this new feature, we now can also check which of
the ts source is reported in the status field as provided in the docs.
Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, we only have software timestamping for the TX ring buffer
path, but this limitation stems rather from the implementation. By
just reusing tpacket_get_timestamp(), we can also allow hardware
timestamping just as in the RX path.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When transmit timestamping is enabled at the socket level, record a
timestamp on packets written to a PACKET_TX_RING. Tx timestamps are
always looped to the application over the socket error queue. Software
timestamps are also written back into the packet frame header in the
packet ring.
Reported-by: Paul Chavent <paul.chavent@onera.fr>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
The following patchset contains fixes for recently applied
Netfilter/IPVS updates to the net-next tree, most relevantly
they are:
* Fix sparse warnings introduced in the RCU conversion, from
Julian Anastasov.
* Fix wrong endianness in the size field of IPVS sync messages,
from Simon Horman.
* Fix missing if checking in nf_xfrm_me_harder, from Dan Carpenter.
* Fix off by one access in the IPVS SCTP tracking code, again from
Dan Carpenter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This if statement was accidentally dropped in (aaa795a netfilter:
nat: propagate errors from xfrm_me_harder()) so now it returns
unconditionally.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
John W. Linville says:
====================
Here is one last(?) big wireless bits pull request before the merge window...
Regarding the mac80211 bits, Johannes says:
"Here's another big pull request for the -next stream. This one has a ton
of driver updates, which hopefully addresses all drivers, but maybe you
have more new drivers than I have in my tree? Not entirely sure, let me
know if this is the case and then I can merge wireless-next.
I'm including a large number of small changes, see the shortlog. The two
bigger things are making VHT compatible with not using channel contexts
(from Karl) and the stop-while-suspended fixes I developed together with
Stanislaw."
...and...
"This time I have a relatively large number of fixes and small
improvements, the most important one being Bob's RCU fix. The two big
things are Felix's work on rate scaling tables (with a big thanks to
Karl too) and my own work on CSA handling to finally properly handle HT
(and some VHT.)"
As for the iwlwifi bits, Johannes says:
"The biggest work here is Bluetooth coexistence and power saving. Other
than that, I have a few small fixes that weren't really needed for 3.9
and a new PCI ID."
About the NFC bits, Samuel says:
"With this one we have:
- A major pn533 update. The pn533 framing support has been changed in order to
easily support all pn533 derivatives. For example we now support the ACR122
USB dongle.
- An NFC MEI physical layer code factorization through the mei_phy NFC API.
Both the microread and the pn544 drivers now use it.
- LLCP aggregation support. This allows NFC p2p devices to send aggregated
frames containing all sort of LLCP frames except SYMM and aggregation
frames.
- More LLCP socket options for getting the remote device link parameters.
- Fixes for the LLCP socket option code added with the first pull request for
3.10.
- Some support for LLCP corner cases like 0 length SDUs and general DISC
(tagged with a 0,0 dsap ssap couple) handling.
- RFKILL support for NFC."
For the b43 bits, Rafał says:
"Let me remind the changes for b43:
> Changes include:
> 1) Minor improvements for HT-PHY code (BCM4331)
> 2) Code cleaning for HT-PHY and N-PHY"
Concerning the bluetooth bits, Gustavo says:
"A set of changes intended for 3.10. The biggest changes here are from David
Herrmann, he rewrote most of the HIDP layer making it more reliable. Marcel
added a driver setup stage for device that need special handling on their
early initialization. Other than that we have the usual clean ups, bugfixes
and small improvements."
Along with all that, there is the usual collection of random/various
updates to ath9k, mwifiex, brcmfmac, brcmsmac, rt2x00, and wil6210.
I also included a pull of the wireless tree to resolve a merge conflict.
Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Depending of the kernel configuration (CONFIG_UIDGID_STRICT_TYPE_CHECKS), we can
get the following errors:
net/netlink/af_netlink.c: In function ‘netlink_queue_mmaped_skb’:
net/netlink/af_netlink.c:663:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’
net/netlink/af_netlink.c:664:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’
net/netlink/af_netlink.c: In function ‘netlink_ring_set_copied’:
net/netlink/af_netlink.c:693:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’
net/netlink/af_netlink.c:694:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’
We must use the helpers to get the uid and gid, and also take care of user_ns.
Fix suggested by Eric W. Biederman <ebiederm@xmission.com>.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The CID is fixed to L2CAP ATT channel and so there is no need to hand it
down to the handling function. Just use a constant instead.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
There are new sparse warnings show up in
tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master
head: a0b644b0385fa58ca578f6dce4473e8a8e6f6c38
commit: 75e84b7c52 Bluetooth: Add __hci_cmd_sync() helper function
date: 13 days ago
>> net/bluetooth/hci_core.c:82:16: sparse: symbol 'hci_get_cmd_complete' was not declared. Should it be static?
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
The Bluetooth Core Specification (4.0) defines the Write LE Host
Supported HCI command as only available for controllers supporting
BR/EDR. This is further reflected in the Read Local Extended Features
HCI command also not being available for LE-only controllers. In other
words, host-side LE support is implicit for single-mode LE controllers
and doesn't have explicit HCI-level enablement.
This patch ensures that the LE setting is always exposed as enabled
through mgmt and returns a "rejected" response if user space tries to
toggle the setting. The patch also ensures that Write LE Host Supported
is never sent for LE-only controllers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
* rpcsec_gss-from_cel: (21 commits)
NFS: Retry SETCLIENTID with AUTH_SYS instead of AUTH_NONE
NFSv4: Don't clear the machine cred when client establish returns EACCES
NFSv4: Fix issues in nfs4_discover_server_trunking
NFSv4: Fix the fallback to AUTH_NULL if krb5i is not available
NFS: Use server-recommended security flavor by default (NFSv3)
SUNRPC: Don't recognize RPC_AUTH_MAXFLAVOR
NFS: Use "krb5i" to establish NFSv4 state whenever possible
NFS: Try AUTH_UNIX when PUTROOTFH gets NFS4ERR_WRONGSEC
NFS: Use static list of security flavors during root FH lookup recovery
NFS: Avoid PUTROOTFH when managing leases
NFS: Clean up nfs4_proc_get_rootfh
NFS: Handle missing rpc.gssd when looking up root FH
SUNRPC: Remove EXPORT_SYMBOL_GPL() from GSS mech switch
SUNRPC: Make gss_mech_get() static
SUNRPC: Refactor nfsd4_do_encode_secinfo()
SUNRPC: Consider qop when looking up pseudoflavors
SUNRPC: Load GSS kernel module by OID
SUNRPC: Introduce rpcauth_get_pseudoflavor()
SUNRPC: Define rpcsec_gss_info structure
NFS: Remove unneeded forward declaration
...
net/netlink/diag.c: In function 'sk_diag_put_rings_cfg':
net/netlink/diag.c:28:17: error: 'struct netlink_sock' has no member named 'pg_vec_lock'
net/netlink/diag.c:29:29: error: 'struct netlink_sock' has no member named 'rx_ring'
net/netlink/diag.c:31:30: error: 'struct netlink_sock' has no member named 'tx_ring'
net/netlink/diag.c:33:19: error: 'struct netlink_sock' has no member named 'pg_vec_lock'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
