Audit the return value of cdev_alloc and hence fixes a potential NULL pointer
dereferencing.
Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull vfs pile (part one) from Al Viro:
"Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
locking violations, etc.
The most visible changes here are death of FS_REVAL_DOT (replaced with
"has ->d_weak_revalidate()") and a new helper getting from struct file
to inode. Some bits of preparation to xattr method interface changes.
Misc patches by various people sent this cycle *and* ocfs2 fixes from
several cycles ago that should've been upstream right then.
PS: the next vfs pile will be xattr stuff."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
saner proc_get_inode() calling conventions
proc: avoid extra pde_put() in proc_fill_super()
fs: change return values from -EACCES to -EPERM
fs/exec.c: make bprm_mm_init() static
ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
ocfs2: fix possible use-after-free with AIO
ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
target: writev() on single-element vector is pointless
export kernel_write(), convert open-coded instances
fs: encode_fh: return FILEID_INVALID if invalid fid_type
kill f_vfsmnt
vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
nfsd: handle vfs_getattr errors in acl protocol
switch vfs_getattr() to struct path
default SET_PERSONALITY() in linux/elf.h
ceph: prepopulate inodes only when request is aborted
d_hash_and_lookup(): export, switch open-coded instances
9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
9p: split dropping the acls from v9fs_set_create_acl()
...
alloc failures already get standardized OOM
messages and a dump_stack.
For the affected mallocs around these OOM messages:
Converted kzallocs with multiplies to kcalloc.
Converted kmallocs with multiplies to kmalloc_array.
Converted a kmalloc/strlen/strncpy to kstrdup.
Moved a spin_lock below a removed OOM message and
removed a now unnecessary spin_unlock.
Neatened alignment and whitespace.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is to get the comedi fixes, and resolve the issue in comdi_test.c
and comedi_fops.c that were caused by changes in both branches.
It also allows the fwserial driver changes to be applied, as they
required the fixes that are in staging-linus.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The URL vmelinux.org is not accessible.
Change it to www.vmelinux.org.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse complains that "arg" is not a __user pointer. The "argp" and
"arg" variables are equivalent but argp is declared as a __user pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-By: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This moves the VME core, VME board drivers, and VME bridge drivers out
of the drivers/staging/vme/ area to drivers/vme/.
The VME device drivers have not moved out yet due to some API questions
they are still working through, that should happen soon, hopefully.
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Vincent Bossier <vincent.bossier@gmail.com>
Cc: "Emilio G. Cota" <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix up some broken printk strings that were spanning multiple lines,
making it hard to search for them.
Cc: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Martyn Welch <martyn.welch@ge.com>
Cc: "Emilio G. Cota" <cota@braap.org>
Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The output of "make versioncheck" told us that:
drivers/staging/vme/devices/vme_pio2_core.c: 13 linux/version.h not needed.
drivers/staging/vme/devices/vme_pio2_gpio.c: 13 linux/version.h not needed.
If we take a look at these files, we will agree to remove it.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <devel@driverdev.osuosl.org>
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DMA functionality fails to work on little endian processors, such as
found on x86 based platforms. The DMA engine copies the link list
descriptors from memory into big endian registers. On little endian systems
this results in the values being byte swapped. This patch uses standard
kernel functionality to ensure that the descriptors are stored in big
endian format.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DMA functionality fails to work on some Intel based platforms. Some
recent Intel platforms have an IOMMU. Transferring the DMA descriptors,
which were mapped using virt_to_phys(), failed. This patch updates the
driver to use dma_map_single().
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pio2_gpio_init() annotated with __init, but called by pio2_probe()
which is annotated __devinit. pio2_gpio_exit() is annotated __exit,
but is called by pio2_probe() and by pio2_remove() which is annotated
__devexit.
Signed-off-by: Gerard Snitselaar <dev@snitselaar.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The PIO2 driver errors when GPIOLIB, on which it depends, is not enabled.
Add dependancy when selecting the PIO2.
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The loop used to reset the interrupt masks has faulty logic. There are 4
banks of 8 I/O, however each mask is comprised of 2 bits and thus there are
8 sets of registers to clear. Driver was wrongly equating this with 8 banks
leading to a us writing past the end of the "bank" array (used to store mask
configuration as these registers are write only) and thus causing memory
corruption. Clear both registers of masks for each bank and half iterations.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch implements a driver for the GE PIO2 VME Parallel I/O Card. This
card is a 6U VME Card, implementing 32 solid-state relay switched IO lines,
in 4 groups of 8. Each bank of IO lines is built to function as input,
output or both depending on the variant of the card.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The functions vme_add_bus() and vme_remove_bus() were only being used
in the vme_register_bridge() and vme_unregister_bridge() functions
respectively. This patch gets rid of them and moves their code to
vme_register_bridge() and vme_unregister_bridge().
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Contents of TODO file has become more of a feature wish-list rather than issues
which should stop the VME driver being merged into the mainline kernel.
Update the TODO list with issues that need to be resolved before it can be
migrated to mainline.
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Previously, the device-driver matching mechanism depended on the
vme_device_id structure due to the need for a bind table per driver.
This method of matching is no longer used so this patch merges the
fields of struct vme_device_id into struct vme_dev. Since this also
renders the slot field meaningless, it has also been removed in this
patch.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Martyn Welch <martyn.welch@ge.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
For jumper based boards (non VME64x), there is no mechanism
for detecting the card that is plugged into a specific slot. This
leads to issues in non-autodiscovery crates/cards when a card is
plugged into a slot that is "claimed" by a different driver. In
reality, there is no problem, but the driver rejects such a
configuration due to its dependence on the concept of slots.
This patch makes the concept of slots less critical and pushes the
driver match() to individual drivers (similar to what happens in the
ISA bus in driver/base/isa.c). This allows drivers to register the
number of devices that they expect without any restrictions. Devices
in this new model are now formatted as $driver_name-$bus_id.$device_id
(as compared to the earlier vme-$bus_id.$slot_number).
This model also makes the device model more logical as devices
are only registered when they actually exist whereas earlier,
a set of devices were being created automatically regardless of
them actually being there.
Another change introduced in this patch is that devices are now created
within the VME driver structure rather than in the VME bridge structure.
This way, things don't go haywire if the bridge driver is removed while
a driver is using it.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Martyn Welch <martyn.welch@ge.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Instead of using a vanilla 'struct device' for VME devices, add new
'struct vme_dev'. Modifications have been made to the VME framework
API as well as all in-tree VME drivers.
The new vme_dev structure has the following advantages from the
current model used by the driver:
* Driver functions (probe, remove) now receive a VME device
instead of a pointer to the bridge device (cleaner design)
* It's easier to differenciate API calls as bridge-based or
device-based (ie. cleaner interface).
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Cc: Martyn Welch <martyn.welch@ge.com>
Reviewed-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Change the static array of 'struct device''s in struct vme_bridge
to instead use an array of pointers. This is in accordance with the
requirement that all kobjects be dynamically allocated (see
Documentation/kobject.txt) and never be statically allocated.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch adds a list which keeps track of all registered VME
buses. This is required for adding refcounting later to bridge
modules, something that is not currently implemented.
This is based on the changes introduced by Emilio G. Cota in the
patch:
https://lkml.org/lkml/2010/10/25/486
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make PCI dependent functions ([alloc|free]_consistent() in
'vme.c') bridge specific. By removing the dependency of the
VME bridge framework on PCI, this patch allows for addition of
non-PCI based VME bridges.
Signed-off-by: Manohar Vanga <manohar.vanga@cern.ch>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Acked-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The vme_irq_set is oblviously not needed (a remnant from old tests) and the
IOCTL exchange types have been updated following Greg's comments.
Allow the IOCTL call to generate VME interrupts when called on the vme/ctl
device with the right arguments.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The wait_event_interruptible call requires a condition as second argument that
needs to be true sometimes, which is obviously not the case with '0'. The new
logic is inspired from the tsi148 driver and takes into account Universe II chip
specifics.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Resurrect the vme/ctl device by allowing to open it even if it has no resources
and make related read/write/llseek operations dummy.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The driver must acknowledge the interrupts that have been actually serviced, not
the ones active. The current code could acknowledge an interrupt that has not
been serviced at all.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch solves all the existing issues reported by checkpatch.pl in the VME
sub-system.
Signed-off-by: Vincent Bossier <vincent.bossier@gmail.com>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
