2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Commit Graph

82 Commits

Author SHA1 Message Date
Alan Stern
c3810c8878 PM / Runtime: Don't enable interrupts while running in_interrupt
This patch (as1445) fixes a bug in the runtime PM core left over from
the addition of the no_callbacks flag.  If this flag is set then it is
possible for rpm_suspend() to be called in_interrupt, so when
releasing spinlocks it's important not to re-enable interrupts.

To avoid an unnecessary save-and-restore of the interrupt flag, the
patch also inlines a pm_request_idle() call.

This fixes Bugzilla #27482.

(The offending code was added in 2.6.37, so it's not necessary to apply
this to any earlier stable kernels.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: tim blechmann <tim@klingt.org>
CC: <stable@kernel.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-01-25 20:50:07 +01:00
Alan Stern
c7b61de5b7 PM / Runtime: Add synchronous runtime interface for interrupt handlers (v3)
This patch (as1431c) makes the synchronous runtime-PM interface
suitable for use in interrupt handlers.  Subsystems can call the new
pm_runtime_irq_safe() function to tell the PM core that a device's
runtime_suspend and runtime_resume callbacks should be invoked with
interrupts disabled and the spinlock held.  This permits the
pm_runtime_get_sync() and the new pm_runtime_put_sync_suspend()
routines to be called from within interrupt handlers.

When a device is declared irq-safe in this way, the PM core increments
the parent's usage count, so the parent will never be runtime
suspended.  This prevents difficult situations in which an irq-safe
device can't resume because it is forced to wait for its non-irq-safe
parent.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-12-24 15:02:41 +01:00
Kevin Winchester
78ca7c37ef PM / Runtime: Fix typo in status comparison causing warning
GCC version 4.5.1 gives the following warning:

drivers/base/power/runtime.c: In function ‘rpm_check_suspend_allowed’:
drivers/base/power/runtime.c:146:25: warning: comparison between ‘enum dpm_state’ and ‘enum rpm_status’

which seems to be a typo in that dev->power.runtime_status
should be compared instead of dev->power.status.

Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-29 15:29:55 +02:00
Ming Lei
d63be5f924 PM / Runtime: fix recursive locking warning of lockdep from rpm_resume()
For device with no_callbacks flag set, its power lock and its parent's
power lock may be held nestedly in rpm_resume, so we should take
spin_lock_nested(lock, SINGLE_DEPTH_NESTING) to acquire parent power lock
to avoid lockdep warning.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-22 23:48:14 +02:00
Rafael J. Wysocki
f71648d73c PM / Runtime: Remove idle notification after failing suspend
If runtime suspend of a device fails returning -EAGAIN or -EBUSY,
which means that it's safe to try to suspend it again, the PM core
runs the runtime idle helper function for it.  Unfortunately this may
lead to problems, for example for PCI devices whose drivers don't
implement the ->runtime_idle() callback, because in that case the
PCI bus type's ->runtime_idle() always calls pm_runtime_suspend()
for the given device.  Then, if there's an automatic idle
notification after the driver's ->runtime_suspend() returning -EAGAIN
or -EBUSY, it will make the suspend happen again possibly causing a
busy loop to appear.  To avoid that, remove the idle notification
after failing runtime suspend of a device altogether and let the
callers of pm_runtime_suspend() repeat the operation if need be.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2010-10-17 01:57:49 +02:00
Rafael J. Wysocki
71c63122c4 PM / Runtime: Reduce code duplication in core helper functions
Reduce code duplication in rpm_idle(), rpm_suspend() and rpm_resume()
by using local pointers to store callback addresses and moving some
duplicated code into a separate function.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-10-17 01:57:49 +02:00
Alan Stern
15bcb91d7e PM / Runtime: Implement autosuspend support
This patch (as1427) implements the "autosuspend" facility for runtime
PM.  A few new fields are added to the dev_pm_info structure and
several new PM helper functions are defined, for telling the PM core
whether or not a device uses autosuspend, for setting the autosuspend
delay, and for marking periods of device activity.

Drivers that do not want to use autosuspend can continue using the
same helper functions as before; their behavior will not change.  In
addition, drivers supporting autosuspend can also call the old helper
functions to get the old behavior.

The details are all explained in Documentation/power/runtime_pm.txt
and Documentation/ABI/testing/sysfs-devices-power.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:48 +02:00
Alan Stern
7490e44239 PM / Runtime: Add no_callbacks flag
Some devices, such as USB interfaces, cannot be power-managed
independently of their parents, i.e., they cannot be put in low power
while the parent remains at full power.  This patch (as1425) creates a
new "no_callbacks" flag, which tells the PM core not to invoke the
runtime-PM callback routines for the such devices but instead to
assume that the callbacks always succeed.  In addition, the
non-debugging runtime-PM sysfs attributes for the devices are removed,
since they are pretty much meaningless.

The advantage of this scheme comes not so much from avoiding the
callbacks themselves, but rather from the fact that without the need
for a process context in which to run the callbacks, more work can be
done in interrupt context.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:47 +02:00
Alan Stern
140a6c9452 PM / Runtime: Combine runtime PM entry points
This patch (as1424) combines the various public entry points for the
runtime PM routines into three simple functions: one for idle, one for
suspend, and one for resume.  A new bitflag specifies whether or not
to increment or decrement the usage_count field.

The new entry points are named __pm_runtime_idle,
__pm_runtime_suspend, and __pm_runtime_resume, to reflect that they
are trampolines.  Simultaneously, the corresponding internal routines
are renamed to rpm_idle, rpm_suspend, and rpm_resume.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:47 +02:00
Alan Stern
1bfee5bc86 PM / Runtime: Merge synchronous and async runtime routines
This patch (as1423) merges the asynchronous routines
__pm_request_idle(), __pm_request_suspend(), and __pm_request_resume()
with their synchronous counterparts.  The RPM_ASYNC bitflag argument
serves to indicate what sort of operation to perform.

In the course of performing this merger, it became apparent that the
various functions don't all behave consistenly with regard to error
reporting and cancellation of outstanding requests.  A new routine,
rpm_check_suspend_allowed(), was written to centralize much of the
testing, and the other functions were revised to follow a simple
algorithm:

	If the operation is disallowed because of the device's
	settings or current state, return an error.

	Cancel pending or scheduled requests of lower priority.

	Schedule, queue, or perform the desired operation.

A few special cases and exceptions are noted in comments.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:46 +02:00
Alan Stern
3f9af0513a PM / Runtime: Replace boolean arguments with bitflags
The "from_wq" argument in __pm_runtime_suspend() and
__pm_runtime_resume() supposedly indicates whether or not the function
was called by the PM workqueue thread, but in fact it isn't always
used this way.  It really indicates whether or not the function should
return early if the requested operation is already in progress.

Along with this badly-named boolean argument, later patches in this
series will add several other boolean arguments to these functions and
others.  Therefore this patch (as1422) begins the conversion process
by replacing from_wq with a bitflag argument.  The same bitflags are
also used in __pm_runtime_get() and __pm_runtime_put(), where they
indicate whether or not the operation should be asynchronous.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:44 +02:00
Alan Stern
4769373ca2 PM / Runtime: Move code in drivers/base/power/runtime.c
This patch (as1421) moves the PM runtime accounting subroutines up to
the beginning of runtime.c, taking them out of the middle of the
functions that do the actual work.  No operational changes.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-17 01:57:44 +02:00
Rafael J. Wysocki
074037ec79 PM / Wakeup: Introduce wakeup source objects and event statistics (v3)
Introduce struct wakeup_source for representing system wakeup sources
within the kernel and for collecting statistics related to them.
Make the recently introduced helper functions pm_wakeup_event(),
pm_stay_awake() and pm_relax() use struct wakeup_source objects
internally, so that wakeup statistics associated with wakeup devices
can be collected and reported in a consistent way (the definition of
pm_relax() is changed, which is harmless, because this function is
not called directly by anyone yet).  Introduce new wakeup-related
sysfs device attributes in /sys/devices/.../power for reporting the
device wakeup statistics.

Change the global wakeup events counters event_count and
events_in_progress into atomic variables, so that it is not necessary
to acquire a global spinlock in pm_wakeup_event(), pm_stay_awake()
and pm_relax(), which should allow us to avoid lock contention in
these functions on SMP systems with many wakeup devices.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-17 01:57:43 +02:00
Arjan van de Ven
8d4b9d1bfe PM / Runtime: Add runtime PM statistics (v3)
In order for PowerTOP to be able to report how well the new runtime PM is
working for the various drivers, the kernel needs to export some basic
statistics in sysfs.

This patch adds two sysfs files in the runtime PM domain that expose the
total time a device has been active, and the time a device has been
suspended.

With this PowerTOP can compute the activity percentage

Active %age = 100 * (delta active) / (delta active + delta suspended)

and present the information to the user.

I've written the PowerTOP code (slated for version 1.12) already, and the
output looks like this:

Runtime Device Power Management statistics
Active  Device name
 10.0%	06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller

[version 2: fix stat update bugs noticed by Alan Stern]
[version 3: rebase to -next and move the sysfs declaration]

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-07-19 02:01:06 +02:00
Alan Stern
240c7337a4 PM: Allow runtime_suspend methods to call pm_schedule_suspend()
This patch (as1361) changes the runtime PM interface slightly; it
allows suspend requests to be scheduled while the runtime_suspend
method is running.  If the method succeeds then the scheduled request
is cancelled, whereas if the method fails then an idle notification is
sent only if no request was scheduled.

Being able to schedule suspend requests from within a runtime_suspend
method is useful for drivers that need to test for idleness and
suspend the device all while holding a single spinlock, or for drivers
that want to check for idleness by polling.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-05-10 23:08:16 +02:00
Rafael J. Wysocki
5382363917 PM / Runtime: Add sysfs switch for disabling device run-time PM
Add new device sysfs attribute, power/control, allowing the user
space to block the run-time power management of the devices.  If this
attribute is set to "on", the driver of the device won't be able to power
manage it at run time (without breaking the rules) and the device will
always be in the full power state (except when the entire system goes
into a sleep state).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
2010-02-26 20:39:08 +01:00
Rafael J. Wysocki
a6ab7aa9f4 PM / Runtime: Use device type and device class callbacks
The power management of some devices is handled through device types
and device classes rather than through bus types.  Since these
devices may also benefit from using the run-time power management
core, extend it so that the device type and device class run-time PM
callbacks can be taken into consideration by it if the bus type
callback is not defined.

Update the run-time PM core documentation to reflect this change.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-22 20:43:17 +01:00
Alan Stern
1d531c14d2 PM: allow for usage_count > 0 in pm_runtime_get()
This patch (as1308c) fixes __pm_runtime_get().  Currently the routine
will resume a device if the prior usage count was 0.  But this isn't
right; thanks to pm_runtime_get_noresume() the usage count can be
positive even while the device is suspended.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-15 20:42:06 +01:00
Rafael J. Wysocki
965c4ac061 PM / Runtime: Remove unnecessary braces in __pm_runtime_set_status()
Some braces in __pm_runtime_set_status() are not necessary, so
remove them.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-06 16:17:57 +01:00
Rafael J. Wysocki
0ddf0ed1d4 PM / Runtime: Ensure timer_expires is nonzero in pm_schedule_suspend()
The runtime PM core code assumes that dev->power.timer_expires is
nonzero when the timer is scheduled, but it may become zero
incidentally in pm_schedule_suspend().  Prevent this from happening
by bumping dev->power.timer_expires up to 1 if it's 0 before calling
mod_timer().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
2009-12-06 16:17:56 +01:00
Alan Stern
63c9480170 PM / Runtime: Use deferred_resume flag in pm_request_resume
This patch (as1307) adds a small optimization to
__pm_request_resume().  If the device is currently being suspended,
there's no need to queue a work routine to resume it.  Setting the
deferred_resume flag will suffice.  (There's also a minor improvement
to the function's code layout: An unnecessary "else" is removed.)

Also, the patch clarifies the usage of the deferred_resume flag.  It
is meaningful only while a suspend is in progress, so it should be
cleared just before a suspend starts, not just after one ends.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-12-06 16:17:56 +01:00
Rafael J. Wysocki
bab636b921 PM / Runtime: Fix lockdep warning in __pm_runtime_set_status()
Lockdep complains about taking the parent lock in
__pm_runtime_set_status(), so mark it as nested.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable@kernel.org
2009-12-06 16:17:56 +01:00
Alan Stern
862f89b3d4 PM: fix irq enable/disable in runtime PM code
This patch (as1305) fixes a bug in the irq-enable settings and removes
some related overhead in the runtime PM code.

	In __pm_runtime_resume(), within the scope of the original
	spin_lock_irq(), we know that irqs are disabled.  There's no
	reason to go through a pair of enable/disable cycles when
	acquiring and releasing the parent's lock.

	In __pm_runtime_set_status(), irqs are already disabled when
	the parent's lock is acquired, and they must remain disabled
	when it is released.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-11-29 16:51:27 +01:00
Pavel Machek
2ddac2a6a8 PM: Remove some debug messages producing too much noise
pm_runtime_idle() is somewhat noisy. Remove debug prints.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-11-03 11:18:18 +01:00
Rafael J. Wysocki
5e928f77a0 PM: Introduce core framework for run-time PM of I/O devices (rev. 17)
Introduce a core framework for run-time power management of I/O
devices.  Add device run-time PM fields to 'struct dev_pm_info'
and device run-time PM callbacks to 'struct dev_pm_ops'.  Introduce
a run-time PM workqueue and define some device run-time PM helper
functions at the core level.  Document all these things.

Special thanks to Alan Stern for his help with the design and
multiple detailed reviews of the pereceding versions of this patch
and to Magnus Damm for testing feedback.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@igel.co.jp>
2009-08-23 00:04:44 +02:00
Alan Stern
3f8df781fc PM: remove deprecated dpm_runtime_* routines
This patch (as933) removes the deprecated dpm_runtime_suspend() and
dpm_runtime_resume() routines from the PM core.  The only user of
those routines is the PCMCIA ds driver; local replacements are added.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 15:49:49 -07:00
Matthias Kaehlcke
11048dcf33 Power Management: use mutexes instead of semaphores
The Power Management code uses semaphores as mutexes.  Use the mutex API
instead of the (binary) semaphores.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11 16:09:01 -07:00
Dominik Brodowski
8e9e793d68 [PATCH] pcmcia: merge suspend into device model
Merge the suspend and resume methods for 16-bit PCMCIA cards into the
device model -- for both runtime power management and suspend to ram/disk.

Bugfix in ds.c by Richard Purdie
Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-06 00:02:03 +01:00
Adrian Bunk
1f1bf132d8 [PATCH] drivers/base/power/runtime.c: #if 0 dpm_set_power_state()
This patch #if 0's an unused global function.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04 16:18:10 -08:00
David Brownell
979d5199fe [PATCH] root hub changes (lesser half)
This patch collects various small updates related to root hubs, to shrink
later patches which build on them.

  - For root hub suspend/resume support:
     * Make the existing usb_hcd_resume_root_hub() routine respect pmcore
       locking, exporting and using the dpm_runtime_resume() method.
     * Add a new usb_hcd_suspend_root_hub() to pair with that routine.
       (Essential to make OHCI autosuspend behave again...)
     * HC_SUSPENDED by itself only refers to the root hub's downstream ports.
       So let HCDs see root hub URBs unless the parent device is suspended.

  - Remove an assertion we no longer need (and now, also don't want).

  - Generic suspend/resume updates to work better with swsusp.
     * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to
       use it breaks the swsusp snapshots it's supposed to help (sigh).
     * On resume, mark devices as resumed right away, but then
       do nothing else if the device is marked NOTATTACHED.

These changes shouldn't be very noticable by themselves.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

 drivers/base/power/runtime.c |    1
 drivers/usb/core/hcd.c       |   64 ++++++++++++++++++++++++++++++++++++++-----
 drivers/usb/core/hcd.h       |    1
 drivers/usb/core/hub.c       |   45 ++++++++++++++++++++++++------
 drivers/usb/core/usb.c       |   20 +++++++++----
 drivers/usb/core/usb.h       |    1
 6 files changed, 111 insertions(+), 21 deletions(-)
2005-10-28 16:47:40 -07:00
Pavel Machek
ca078bae81 [PATCH] swsusp: switch pm_message_t to struct
This adds type-checking to pm_message_t, so that people can't confuse it
with int or u32.  It also allows us to fix "disk yoyo" during suspend (disk
spinning down/up/down).

[We've tried that before; since that cpufreq problems were fixed and I've
tried make allyes config and fixed resulting damage.]

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Alexander Nyberg <alexn@telia.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05 00:06:16 -07:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00