'pushq' doesn't exist on i386. Replace with 'push', which should work
since the operand is a register.
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Make fastop opcodes usable in other emulations.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
This is a bit of a special case since we don't have the usual
byte/word/long/quad switch; instead we switch on the condition code embedded
in the instruction.
Reviewed-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Opcodes:
TEST
CMP
ADD
ADC
SUB
SBB
XOR
OR
AND
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
We emulate arithmetic opcodes by executing a "similar" (same operation,
different operands) on the cpu. This ensures accurate emulation, esp. wrt.
eflags. However, the prologue and epilogue around the opcode is fairly long,
consisting of a switch (for the operand size) and code to load and save the
operands. This is repeated for every opcode.
This patch introduces an alternative way to emulate arithmetic opcodes.
Instead of the above, we have four (three on i386) functions consisting
of just the opcode and a ret; one for each operand size. For example:
.align 8
em_notb:
not %al
ret
.align 8
em_notw:
not %ax
ret
.align 8
em_notl:
not %eax
ret
.align 8
em_notq:
not %rax
ret
The prologue and epilogue are shared across all opcodes. Note the functions
use a special calling convention; notably eflags is an input/output parameter
and is not clobbered. Rather than dispatching the four functions through a
jump table, the functions are declared as a constant size (8) so their address
can be calculated.
Acked-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi.kivity@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
According to Intel SDM Vol3 Section 5.5 "Privilege Levels" and 5.6
"Privilege Level Checking When Accessing Data Segments" RPL checking is
done during loading of a segment selector, not during data access. We
already do checking during segment selector loading, so drop the check
during data access. Checking RPL during data access triggers #GP if
after transition from real mode to protected mode RPL bits in a segment
selector are set.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
MOV immediate instruction (opcodes 0xB8-0xBF) may take 64-bit operand.
The previous emulation implementation assumes the operand is no longer than 32.
Adding OpImm64 for this matter.
Fixes https://bugzilla.redhat.com/show_bug.cgi?id=881579
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Pull KVM updates from Marcelo Tosatti:
"Considerable KVM/PPC work, x86 kvmclock vsyscall support,
IA32_TSC_ADJUST MSR emulation, amongst others."
Fix up trivial conflict in kernel/sched/core.c due to cross-cpu
migration notifier added next to rq migration call-back.
* tag 'kvm-3.8-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (156 commits)
KVM: emulator: fix real mode segment checks in address linearization
VMX: remove unneeded enable_unrestricted_guest check
KVM: VMX: fix DPL during entry to protected mode
x86/kexec: crash_vmclear_local_vmcss needs __rcu
kvm: Fix irqfd resampler list walk
KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump
x86/kexec: VMCLEAR VMCSs loaded on all cpus if necessary
KVM: MMU: optimize for set_spte
KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interface
KVM: PPC: bookehv: Add EPCR support in mtspr/mfspr emulation
KVM: PPC: bookehv: Add guest computation mode for irq delivery
KVM: PPC: Make EPCR a valid field for booke64 and bookehv
KVM: PPC: booke: Extend MAS2 EPN mask for 64-bit
KVM: PPC: e500: Mask MAS2 EPN high 32-bits in 32/64 tlbwe emulation
KVM: PPC: Mask ea's high 32-bits in 32/64 instr emulation
KVM: PPC: e500: Add emulation helper for getting instruction ea
KVM: PPC: bookehv64: Add support for interrupt handling
KVM: PPC: bookehv: Remove GET_VCPU macro from exception handler
KVM: PPC: booke: Fix get_tb() compile error on 64-bit
KVM: PPC: e500: Silence bogus GCC warning in tlb code
...
In real mode CS register is writable, so do not #GP on write.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
In __emulate_1op_rax_rdx, we use "+a" and "+d" which are input/output
constraints, and *then* use "a" and "d" as input constraints. This is
incorrect, but happens to work on some versions of gcc.
However, it breaks gcc with -O0 and icc, and may break on future
versions of gcc.
Reported-and-tested-by: Melanie Blower <melanie.blower@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/B3584E72CFEBED439A3ECA9BCE67A4EF1B17AF90@FMSMSX107.amr.corp.intel.com
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Optimize "rep ins" by allowing emulator to write back more than one
datum at a time. Introduce new operand type OP_MEM_STR which tells
writeback() that dst contains pointer to an array that should be written
back as opposite to just one data element.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove unneeded segment argument. Address structure already has correct
segment which was put there during decode.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
We never change emulate_ops[] at runtime so it should be r/o.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The opcode tables never change at runtime, therefor mark them const.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
As the the compiler ensures that the memory operand is always aligned
to a 16 byte memory location, use the aligned variant of MOVDQ for
read_sse_reg() and write_sse_reg().
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Segment limits are verified in real mode, not just protected mode.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
When loading a segment in real mode, only the base and selector must
be modified. The limit needs to be left alone, otherwise big real mode
users will hit a #GP due to limit checking (currently this is suppressed
because we don't check limits in real mode).
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Instead of populating the entire register file, read in registers
as they are accessed, and write back only the modified ones. This
saves a VMREAD and VMWRITE on Intel (for rsp, since it is not usually
used during emulation), and a two 128-byte copies for the registers.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Merging critical fixes from upstream required for development.
* upstream/master: (809 commits)
libata: Add a space to " 2GB ATA Flash Disk" DMA blacklist entry
Revert "powerpc: Update g5_defconfig"
powerpc/perf: Use pmc_overflow() to detect rolled back events
powerpc: Fix VMX in interrupt check in POWER7 copy loops
powerpc: POWER7 copy_to_user/copy_from_user patch applied twice
powerpc: Fix personality handling in ppc64_personality()
powerpc/dma-iommu: Fix IOMMU window check
powerpc: Remove unnecessary ifdefs
powerpc/kgdb: Restore current_thread_info properly
powerpc/kgdb: Bail out of KGDB when we've been triggered
powerpc/kgdb: Do not set kgdb_single_step on ppc
powerpc/mpic_msgr: Add missing includes
powerpc: Fix null pointer deref in perf hardware breakpoints
powerpc: Fixup whitespace in xmon
powerpc: Fix xmon dl command for new printk implementation
xfs: check for possible overflow in xfs_ioc_trim
xfs: unlock the AGI buffer when looping in xfs_dialloc
xfs: fix uninitialised variable in xfs_rtbuf_get()
powerpc/fsl: fix "Failed to mount /dev: No such device" errors
powerpc/fsl: update defconfigs
...
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
The sub-register used to access the stack (sp, esp, or rsp) is not
determined by the address size attribute like other memory references,
but by the stack segment's B bit (if not in x86_64 mode).
Fix by using the existing stack_mask() to figure out the correct mask.
This long-existing bug was exposed by a combination of a27685c33a
(emulate invalid guest state by default), which causes many more
instructions to be emulated, and a seabios change (possibly a bug) which
causes the high 16 bits of esp to become polluted across calls to real
mode software interrupts.
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
setup_syscalls_segments() calls get_segment() and than overwrites all
but one of the structure fields and this one should also be overwritten
anyway, so we can drop call to get_segment() and avoid a couple of vmreads
on vmx. Also drop zeroing ss/cs structures since most of the fields are
set anyway. Just set those that were not set explicitly.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
No need split mmio read region into 8-bits pieces since we do it in
emulator_read_write_onepage
Changelog:
Add a WARN_ON to check read-cache overflow
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Guest software doesn't actually depend on it, but vmx will refuse us
entry if we don't. Set the bit in both the cached segment and memory,
just to be nice.
Signed-off-by: Avi Kivity <avi@redhat.com>
Opcode C8.
Only ENTER with lexical nesting depth 0 is implemented, since others are
very rare. We'll fail emulation if nonzero lexical depth is used so data
is not corrupted.
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit 2adb5ad9fe removed ByteOp from MOVZX/MOVSX, replacing them by
SrcMem8, but neglected to fix the dependency in the emulation code
on ByteOp. This caused the instruction not to have any effect in
some circumstances.
Fix by replacing the check for ByteOp with the equivalent src.op_bytes == 1.
Signed-off-by: Avi Kivity <avi@redhat.com>
We correctly default to SS when BP is used as a base in 16-bit address mode,
but we don't do that for 32-bit mode.
Fix by adjusting the default to SS when either ESP or EBP is used as the base
register.
Signed-off-by: Avi Kivity <avi@redhat.com>
