Document in comments what the options are supposed to mean, before
clean-up in next patch.
No functionality change here.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
PCI/ACPI selections should not happen in Kconfig for machine drivers,
move to SOC selections.
Add distinction between PCI and ACPI HiFi2 platforms and help text.
There should be no functionality change.
The PCI-based platforms may be removed at some point since Medfield
is not really supported by anyone, and with Edison now defunct support for
Merrifield/Edison is to be determined.
The dependency on SND_DMA_SGBUF for Haswell is not clear at this
point and may have to be further updated.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow network example suggested by Linus, move Intel definitions
in if/endif block and clarify in help text which options distro
configurations should enable - everything except legacy Baytrail stuff and
NOCODEC (test only)
To avoid user confusion, machine drivers are handled with a submenu made
dependent on this top-level selector.
There should be no functionality change - except that sound capabilities
are restored when using older configs without any user selection.
Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered
out by the top-level selector. This will change in the near future to
allow for this option to be selected by both SST and SOF drivers
(simplification with submenu for machine drivers by Vinod Koul)
Fixes: f6a118a800 ("ASoC: Intel: clarify Kconfig dependencies")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Define DMI quirk for rt5651 eval board connected to MinnowBoard
Turbot. The only difference with a MinnowBoard MAX is that the MCLK
pin is enabled on the LSE connector
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Keqiao.Zhang <Keqiao.zhang@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
On Minnowboard Max with Realtek rt5651 eval board, the IN3P is
connected to Headset Mic.
Here add and select it for Minnowboard Max.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The current code doesn't enable the MCLK which reduces audio quality
(PLL driven from BLCK), fix the quirk
Tested-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch fixes 3 small issues:
- missing 2nd '*' at the beginning of a doxygen comment
- extra space after a '\n' in a dev_dbg message
- extra tab before a 'return" statement
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
In some error handling paths, an error code is assiegned to 'ret'.
However, the function always return 0.
Fix it and return the error code if such an error paths is taken.
Fixes: 3d9ff34622 ("ASoC: Intel: sst: add stream operations")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace snd_soc_acpi_check_hid() with the generic acpi_dev_present()
and remove the now unused snd_soc_acpi_check_hid function. This should
have no functional change.
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI/machine-driver code refactoring introduced in 4.13 introduced
a regression for cases where we need a DMI-based quirk to select the
machine driver (the BIOS reports an invalid HID). The fix is just to
make sure the results of the quirk are actually used.
Fixes: 54746dabf7 ('ASoC: Improve machine driver selection based on quirk data')
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Færber <nicole.faerber@dpin.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
I got the following kernel warning when loading snd-soc-skl module on
Dell Latitude 7270 laptop:
memremap attempted on mixed range 0x0000000000000000 size: 0x0
WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180
Call Trace:
skl_nhlt_init+0x82/0xf0 [snd_soc_skl]
skl_probe+0x2ee/0x7c0 [snd_soc_skl]
....
It seems that the machine doesn't support the SKL DSP gives the empty
NHLT entry, and it triggers the warning. For avoiding it, let do the
zero check before calling memremap().
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
During firmware and library download, sometimes it is observed that
firmware and library download is timed-out resulting into probe failure.
This patch disables dynamic clock gating while firmware and library
download.
Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Platform registration happens in probe work handler whereas machine
device is registered during skl_probe. This sometimes results in cpu
dais not found if the work handler is sufficiently delayed due to system
load, even with deferred probe of machine driver.
So move machine device registration after registering platform.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Sometimes during boot, panic is observed at sst_dsp_shim_read_unlocked().
This happens when interrupt occurs before the context is initialized. So
move the irq initialization only after the context is initialized
completely.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Pawse, GuruprasadX <guruprasadx.pawse@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
I get a Smatch warning here:
sound/soc/intel/skylake/skl-nhlt.c:335 skl_get_ssp_clks()
error: testing array offset 'j' after use.
The code is harmless, but the checker is right that we should swap these
two conditions so we verify that the offset is within bounds before we
use it.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP clock source is configured by sending the A-State table to the FW.
Add the large config set IPC to configure the desired clock source
Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
A-State table is a power management table which allows the driver to
configure the DSP clock source corresponding to various load thresholds.
The table contains upto 3 A-State entries. The patch adds and parses the
corresponding A-State tokens to build the table.
Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
No need to read the register again if the value read has already matched
the target during the loop. So remove the second shim read.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rtd->codec will be removed soon.
rtd->codec = rtd->codec_dai->codec, thus,
we can use rtd->codec_dai->component instead of it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
rtd->codec will be removed soon.
rtd->codec = rtd->codec_dai->codec, thus,
we can use rtd->codec_dai->component instead of it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix a few incorrect descriptions for arguments in exported functions.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some functions are local to the source and do not need to be in global
scope, so make them static.
Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_irq() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
platform_get_irq() can fail here and we must check its return value.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This laptop has actually two different analog mics, no just one. Fix the
quirk to reflect the correct configuration.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The RT5651 codec has 3 analog inputs. Some laptops have two different
internal analog microphones on the external case.
Add a new custom quirk mapping the two internal mics on IN1P / IN2P,
leaving the headset mic on IN3P.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When NHLT endpoint is present for a SSP then we create clock for that SSP.
MCLK is consistent across endpoints and configuration for an SSP, so query
only for first endpoint for an SSP.
For SCLK/SCLKFS, the best fit is queried from the NHLT configurations which
matches the clock rate requested. Best fit is decided based on below:
1. If rate matches with multiple configurations, then the first
configuration is selected.
2. If for a selected fs and bits_per_sample, there are multiple endpoint
configuration match, then the configuration with max number of
channels is selected. So, the user has to set the rate which fits
max number of channels
So we create a platform device and pass clock information parsed as
platform data.
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.
For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.
Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.
For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.
Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull ARM fixes from Russell King:
- LPAE fixes for kernel-readonly regions
- Fix for get_user_pages_fast on LPAE systems
- avoid tying decompressor to a particular platform if DEBUG_LL is
enabled
- BUG if we attempt to return to userspace but the to-be-restored PSR
value keeps us in privileged mode (defeating an issue that ftracetest
found)
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: BUG if jumping to usermode address in kernel mode
ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
ARM: make decompressor debug output user selectable
ARM: fix get_user_pages_fast
Pull irq fixes from Thomas Glexiner:
- unbreak the irq trigger type check for legacy platforms
- a handful fixes for ARM GIC v3/4 interrupt controllers
- a few trivial fixes all over the place
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/matrix: Make - vs ?: Precedence explicit
irqchip/imgpdc: Use resource_size function on resource object
irqchip/qcom: Fix u32 comparison with value less than zero
irqchip/exiu: Fix return value check in exiu_init()
irqchip/gic-v3-its: Remove artificial dependency on PCI
irqchip/gic-v4: Add forward definition of struct irq_domain_ops
irqchip/gic-v3: pr_err() strings should end with newlines
irqchip/s3c24xx: pr_err() strings should end with newlines
irqchip/gic-v3: Fix ppi-partitions lookup
irqchip/gic-v4: Clear IRQ_DISABLE_UNLAZY again if mapping fails
genirq: Track whether the trigger type has been set
Pull misc x86 fixes from Ingo Molnar:
- topology enumeration fixes
- KASAN fix
- two entry fixes (not yet the big series related to KASLR)
- remove obsolete code
- instruction decoder fix
- better /dev/mem sanity checks, hopefully working better this time
- pkeys fixes
- two ACPI fixes
- 5-level paging related fixes
- UMIP fixes that should make application visible faults more debuggable
- boot fix for weird virtualization environment
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86/decoder: Add new TEST instruction pattern
x86/PCI: Remove unused HyperTransport interrupt support
x86/umip: Fix insn_get_code_seg_params()'s return value
x86/boot/KASLR: Remove unused variable
x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
x86/mm/kasan: Don't use vmemmap_populate() to initialize shadow
x86/entry/64: Fix entry_SYSCALL_64_after_hwframe() IRQ tracing
x86/pkeys/selftests: Fix protection keys write() warning
x86/pkeys/selftests: Rename 'si_pkey' to 'siginfo_pkey'
x86/mpx/selftests: Fix up weird arrays
x86/pkeys: Update documentation about availability
x86/umip: Print a warning into the syslog if UMIP-protected instructions are used
x86/smpboot: Fix __max_logical_packages estimate
x86/topology: Avoid wasting 128k for package id array
perf/x86/intel/uncore: Cache logical pkg id in uncore driver
x86/acpi: Reduce code duplication in mp_override_legacy_irq()
x86/acpi: Handle SCI interrupts above legacy space gracefully
x86/boot: Fix boot failure when SMP MP-table is based at 0
x86/mm: Limit mmap() of /dev/mem to valid physical addresses
x86/selftests: Add test for mapping placement for 5-level paging
...
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: a documentation fix, a Sparse warning fix and a debugging
fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/debug: Fix task state recording/printout
sched/deadline: Don't use dubious signed bitfields
sched/deadline: Fix the description of runtime accounting in the documentation
Pull perf fixes from Ingo Molnar:
"Misc fixes: two PMU driver fixes and a memory leak fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix memory leak triggered by perf --namespace
perf/x86/intel/uncore: Add event constraint for BDX PCU
perf/x86/intel: Hide TSX events when RTM is not supported
Pull static key fix from Ingo Molnar:
"Fix a boot warning related to bad init ordering of the static keys
self-test"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_label: Invoke jump_label_test() via early_initcall()
Pull objtool fixes from Ingo Molnar:
"A handful of objtool fixes, most of them related to making the UAPI
header-syncing warnings easier to read and easier to act upon"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/headers: Sync objtool UAPI header
objtool: Fix cross-build
objtool: Move kernel headers/code sync check to a script
objtool: Move synced files to their original relative locations
objtool: Make unreachable annotation inline asms explicitly volatile
objtool: Add a comment for the unreachable annotation macros
Detect if we are returning to usermode via the normal kernel exit paths
but the saved PSR value indicates that we are in kernel mode. This
could occur due to corrupted stack state, which has been observed with
"ftracetest".
This ensures that we catch the problem case before we get to user code.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Pull timer updates from Thomas Gleixner:
- The final conversion of timer wheel timers to timer_setup().
A few manual conversions and a large coccinelle assisted sweep and
the removal of the old initialization mechanisms and the related
code.
- Remove the now unused VSYSCALL update code
- Fix permissions of /proc/timer_list. I still need to get rid of that
file completely
- Rename a misnomed clocksource function and remove a stale declaration
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
m68k/macboing: Fix missed timer callback assignment
treewide: Remove TIMER_FUNC_TYPE and TIMER_DATA_TYPE casts
timer: Remove redundant __setup_timer*() macros
timer: Pass function down to initialization routines
timer: Remove unused data arguments from macros
timer: Switch callback prototype to take struct timer_list * argument
timer: Pass timer_list pointer to callbacks unconditionally
Coccinelle: Remove setup_timer.cocci
timer: Remove setup_*timer() interface
timer: Remove init_timer() interface
treewide: setup_timer() -> timer_setup() (2 field)
treewide: setup_timer() -> timer_setup()
treewide: init_timer() -> setup_timer()
treewide: Switch DEFINE_TIMER callbacks to struct timer_list *
s390: cmm: Convert timers to use timer_setup()
lightnvm: Convert timers to use timer_setup()
drivers/net: cris: Convert timers to use timer_setup()
drm/vc4: Convert timers to use timer_setup()
block/laptop_mode: Convert timers to use timer_setup()
net/atm/mpc: Avoid open-coded assignment of timer callback function
...
- Use pwd instead of /bin/pwd for portability
- Clean up Makefiles
- Fix ld-option for clang
- Fix malloc'ed data size in Kconfig
- Fix parallel building along with coccicheck
- Fix a minor issue of package building
- Prompt to use "rpm-pkg" instead of "rpm"
- Clean up *.i and *.lst patterns by "make clean"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a2Td
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- use 'pwd' instead of '/bin/pwd' for portability
- clean up Makefiles
- fix ld-option for clang
- fix malloc'ed data size in Kconfig
- fix parallel building along with coccicheck
- fix a minor issue of package building
- prompt to use "rpm-pkg" instead of "rpm"
- clean up *.i and *.lst patterns by "make clean"
* tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: drop $(extra-y) from real-objs-y
kbuild: clean up *.i and *.lst patterns by make clean
kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used
kbuild: pkg: use --transform option to prefix paths in tar
coccinelle: fix parallel build with CHECK=scripts/coccicheck
kconfig/symbol.c: use correct pointer type argument for sizeof
kbuild: Set KBUILD_CFLAGS before incl. arch Makefile
kbuild: remove all dummy assignments to obj-
kbuild: create built-in.o automatically if parent directory wants it
kbuild: /bin/pwd -> pwd
-----BEGIN PGP SIGNATURE-----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=v3Rx
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20171124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
- Make AFS file locking work again.
- Don't write to a page that's being written out, but wait for it to
complete.
- Do d_drop() and d_add() in the right places.
- Put keys on error paths.
- Remove some redundant code.
* tag 'afs-fixes-20171124' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: remove redundant assignment of dvnode to itself
afs: cell: Remove unnecessary code in afs_lookup_cell
afs: Fix signal handling in some file ops
afs: Fix some dentry handling in dir ops and missing key_puts
afs: Make afs_write_begin() avoid writing to a page that's being stored
afs: Fix file locking
* GICv4 Support for KVM/ARM
All ARM patches were in next-20171113. I have postponed most x86 fixes
to 4.15-rc2 and UMIP to 4.16, but there are fixes that would be good to
have already in 4.15-rc1:
* re-introduce support for CPUs without virtual NMI (cc stable)
and allow testing of KVM without virtual NMI on available CPUs
* fix long-standing performance issues with assigned devices on AMD
(cc stable)
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJaGECGAAoJEED/6hsPKofoT08H/AuaMi8qprw2BNpVBbQxWRWM
O4WPk7yz1zB4SkdRNrPzCMBy+qoK7FcV/3BpsFPuQS4NHQ+GvQ87N/7tUbouVyl6
CuPGJMCnNzMQ8GvLOJgB1/sz+uW5W/ph3y8kv1UP3/hNCZU4fqukoUeLroOH/wr6
N3bSY8bok7ycdpgybHmbUHY0Yk4IUk3m0RXWY9U5Jl3sjoNEwCw3pWdrq9Swfs/6
W8QJRdE4Z6KHPqW5sRnPj24IpoUpCxu+IT+gPuGlDUCN/h3sfhYvMS6GgDrCjiiZ
2z1TwaIAo+wGjlBQzGmyTUjUPjbGew+f3ixBlf2BtmNutX+tX2qsVfl1NKXYTto=
=GGge
-----END PGP SIGNATURE-----
Merge tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Radim Krčmář:
"Trimmed second batch of KVM changes for Linux 4.15:
- GICv4 Support for KVM/ARM
- re-introduce support for CPUs without virtual NMI (cc stable) and
allow testing of KVM without virtual NMI on available CPUs
- fix long-standing performance issues with assigned devices on AMD
(cc stable)"
* tag 'kvm-4.15-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (30 commits)
kvm: vmx: Allow disabling virtual NMI support
kvm: vmx: Reinstate support for CPUs without virtual NMI
KVM: SVM: obey guest PAT
KVM: arm/arm64: Don't queue VLPIs on INV/INVALL
KVM: arm/arm64: Fix GICv4 ITS initialization issues
KVM: arm/arm64: GICv4: Theory of operations
KVM: arm/arm64: GICv4: Enable VLPI support
KVM: arm/arm64: GICv4: Prevent userspace from changing doorbell affinity
KVM: arm/arm64: GICv4: Prevent a VM using GICv4 from being saved
KVM: arm/arm64: GICv4: Enable virtual cpuif if VLPIs can be delivered
KVM: arm/arm64: GICv4: Hook vPE scheduling into vgic flush/sync
KVM: arm/arm64: GICv4: Use the doorbell interrupt as an unblocking source
KVM: arm/arm64: GICv4: Add doorbell interrupt handling
KVM: arm/arm64: GICv4: Use pending_last as a scheduling hint
KVM: arm/arm64: GICv4: Handle INVALL applied to a vPE
KVM: arm/arm64: GICv4: Propagate property updates to VLPIs
KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE
KVM: arm/arm64: GICv4: Handle CLEAR applied to a VLPI
KVM: arm/arm64: GICv4: Propagate affinity changes to the physical ITS
KVM: arm/arm64: GICv4: Unmap VLPI when freeing an LPI
...
A small batch of fixes, about 50% tagged for stable and the rest for recently
merged code.
There's one more fix for the >128T handling on hash. Once a process had
requested a single mmap above 128T we would then always search above 128T. The
correct behaviour is to consider the hint address in isolation for each mmap
request.
Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in VAS, a fix
for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly identify P9 DD2.1 but in
code that is currently not used by default.
Thanks to:
Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan, Sukadev Bhattiprolu.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=gv70
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A small batch of fixes, about 50% tagged for stable and the rest for
recently merged code.
There's one more fix for the >128T handling on hash. Once a process
had requested a single mmap above 128T we would then always search
above 128T. The correct behaviour is to consider the hint address in
isolation for each mmap request.
Then a couple of fixes for the IMC PMU, a missing EXPORT_SYMBOL in
VAS, a fix for STRICT_KERNEL_RWX on 32-bit, and a fix to correctly
identify P9 DD2.1 but in code that is currently not used by default.
Thanks to: Aneesh Kumar K.V, Christophe Leroy, Madhavan Srinivasan,
Sukadev Bhattiprolu"
* tag 'powerpc-4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: Fix Power9 DD2.1 logic in DT CPU features
powerpc/perf: Fix IMC_MAX_PMU macro
powerpc/perf: Fix pmu_count to count only nest imc pmus
powerpc: Fix boot on BOOK3S_32 with CONFIG_STRICT_KERNEL_RWX
powerpc/perf/imc: Use cpu_to_node() not topology_physical_package_id()
powerpc/vas: Export chip_to_vas_id()
powerpc/64s/slice: Use addr limit when computing slice mask
Pull SCSI target updates from Nicholas Bellinger:
"This series is predominantly bug-fixes, with a few small improvements
that have been outstanding over the last release cycle.
As usual, the associated bug-fixes have CC' tags for stable.
Also, things have been particularly quiet wrt new developments the
last months, with most folks continuing to focus on stability atop 4.x
stable kernels for their respective production configurations.
Also at this point, the stable trees have been synced up with
mainline. This will continue to be a priority, as production users
tend to run exclusively atop stable kernels, a few releases behind
mainline.
The highlights include:
- Fix PR PREEMPT_AND_ABORT null pointer dereference regression in
v4.11+ (tangwenji)
- Fix OOPs during removing TCMU device (Xiubo Li + Zhang Zhuoyu)
- Add netlink command reply supported option for each device (Kenjiro
Nakayama)
- cxgbit: Abort the TCP connection in case of data out timeout (Varun
Prakash)
- Fix PR/ALUA file path truncation (David Disseldorp)
- Fix double se_cmd completion during ->cmd_time_out (Mike Christie)
- Fix QUEUE_FULL + SCSI task attribute handling in 4.1+ (Bryant Ly +
nab)
- Fix quiese during transport_write_pending_qf endless loop (nab)
- Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK in 3.14+
(Don White + nab)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (35 commits)
tcmu: Add a missing unlock on an error path
tcmu: Fix some memory corruption
iscsi-target: Fix non-immediate TMR reference leak
iscsi-target: Make TASK_REASSIGN use proper se_cmd->cmd_kref
target: Avoid early CMD_T_PRE_EXECUTE failures during ABORT_TASK
target: Fix quiese during transport_write_pending_qf endless loop
target: Fix caw_sem leak in transport_generic_request_failure
target: Fix QUEUE_FULL + SCSI task attribute handling
iSCSI-target: Use common error handling code in iscsi_decode_text_input()
target/iscsi: Detect conn_cmd_list corruption early
target/iscsi: Fix a race condition in iscsit_add_reject_from_cmd()
target/iscsi: Modify iscsit_do_crypto_hash_buf() prototype
target/iscsi: Fix endianness in an error message
target/iscsi: Use min() in iscsit_dump_data_payload() instead of open-coding it
target/iscsi: Define OFFLOAD_BUF_SIZE once
target: Inline transport_put_cmd()
target: Suppress gcc 7 fallthrough warnings
target: Move a declaration of a global variable into a header file
tcmu: fix double se_cmd completion
target: return SAM_STAT_TASK_SET_FULL for TCM_OUT_OF_RESOURCES
...
This fixes a missed function prototype callback from the timer conversions.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20171123221902.GA75727@beast
The assignment of dvnode to itself is redundant and can be removed.
Cleans up warning detected by cppcheck:
fs/afs/dir.c:975: (warning) Redundant assignment of 'dvnode' to itself.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Due to recent changes this piece of code is no longer needed.
Addresses-Coverity-ID: 1462033
Link: https://lkml.kernel.org/r/4923.1510957307@warthog.procyon.org.uk
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
