Since 5.7-rc1, on btrfs we have a percpu counter initialization for
which we always pass a GFP_KERNEL gfp_t argument (this happens since
commit 2992df7326 ("btrfs: Implement DREW lock")).
That is safe in some contextes but not on others where allowing fs
reclaim could lead to a deadlock because we are either holding some
btrfs lock needed for a transaction commit or holding a btrfs
transaction handle open. Because of that we surround the call to the
function that initializes the percpu counter with a NOFS context using
memalloc_nofs_save() (this is done at btrfs_init_fs_root()).
However it turns out that this is not enough to prevent a possible
deadlock because percpu_alloc() determines if it is in an atomic context
by looking exclusively at the gfp flags passed to it (GFP_KERNEL in this
case) and it is not aware that a NOFS context is set.
Because percpu_alloc() thinks it is in a non atomic context it locks the
pcpu_alloc_mutex. This can result in a btrfs deadlock when
pcpu_balance_workfn() is running, has acquired that mutex and is waiting
for reclaim, while the btrfs task that called percpu_counter_init() (and
therefore percpu_alloc()) is holding either the btrfs commit_root
semaphore or a transaction handle (done fs/btrfs/backref.c:
iterate_extent_inodes()), which prevents reclaim from finishing as an
attempt to commit the current btrfs transaction will deadlock.
Lockdep reports this issue with the following trace:
======================================================
WARNING: possible circular locking dependency detected
5.6.0-rc7-btrfs-next-77 #1 Not tainted
------------------------------------------------------
kswapd0/91 is trying to acquire lock:
ffff8938a3b3fdc8 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
but task is already holding lock:
ffffffffb4f0dbc0 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (fs_reclaim){+.+.}:
fs_reclaim_acquire.part.0+0x25/0x30
__kmalloc+0x5f/0x3a0
pcpu_create_chunk+0x19/0x230
pcpu_balance_workfn+0x56a/0x680
process_one_work+0x235/0x5f0
worker_thread+0x50/0x3b0
kthread+0x120/0x140
ret_from_fork+0x3a/0x50
-> #3 (pcpu_alloc_mutex){+.+.}:
__mutex_lock+0xa9/0xaf0
pcpu_alloc+0x480/0x7c0
__percpu_counter_init+0x50/0xd0
btrfs_drew_lock_init+0x22/0x70 [btrfs]
btrfs_get_fs_root+0x29c/0x5c0 [btrfs]
resolve_indirect_refs+0x120/0xa30 [btrfs]
find_parent_nodes+0x50b/0xf30 [btrfs]
btrfs_find_all_leafs+0x60/0xb0 [btrfs]
iterate_extent_inodes+0x139/0x2f0 [btrfs]
iterate_inodes_from_logical+0xa1/0xe0 [btrfs]
btrfs_ioctl_logical_to_ino+0xb4/0x190 [btrfs]
btrfs_ioctl+0x165a/0x3130 [btrfs]
ksys_ioctl+0x87/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5c/0x260
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #2 (&fs_info->commit_root_sem){++++}:
down_write+0x38/0x70
btrfs_cache_block_group+0x2ec/0x500 [btrfs]
find_free_extent+0xc6a/0x1600 [btrfs]
btrfs_reserve_extent+0x9b/0x180 [btrfs]
btrfs_alloc_tree_block+0xc1/0x350 [btrfs]
alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
__btrfs_cow_block+0x122/0x5a0 [btrfs]
btrfs_cow_block+0x106/0x240 [btrfs]
commit_cowonly_roots+0x55/0x310 [btrfs]
btrfs_commit_transaction+0x509/0xb20 [btrfs]
sync_filesystem+0x74/0x90
generic_shutdown_super+0x22/0x100
kill_anon_super+0x14/0x30
btrfs_kill_super+0x12/0x20 [btrfs]
deactivate_locked_super+0x31/0x70
cleanup_mnt+0x100/0x160
task_work_run+0x93/0xc0
exit_to_usermode_loop+0xf9/0x100
do_syscall_64+0x20d/0x260
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #1 (&space_info->groups_sem){++++}:
down_read+0x3c/0x140
find_free_extent+0xef6/0x1600 [btrfs]
btrfs_reserve_extent+0x9b/0x180 [btrfs]
btrfs_alloc_tree_block+0xc1/0x350 [btrfs]
alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
__btrfs_cow_block+0x122/0x5a0 [btrfs]
btrfs_cow_block+0x106/0x240 [btrfs]
btrfs_search_slot+0x50c/0xd60 [btrfs]
btrfs_lookup_inode+0x3a/0xc0 [btrfs]
__btrfs_update_delayed_inode+0x90/0x280 [btrfs]
__btrfs_commit_inode_delayed_items+0x81f/0x870 [btrfs]
__btrfs_run_delayed_items+0x8e/0x180 [btrfs]
btrfs_commit_transaction+0x31b/0xb20 [btrfs]
iterate_supers+0x87/0xf0
ksys_sync+0x60/0xb0
__ia32_sys_sync+0xa/0x10
do_syscall_64+0x5c/0x260
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (&delayed_node->mutex){+.+.}:
__lock_acquire+0xef0/0x1c80
lock_acquire+0xa2/0x1d0
__mutex_lock+0xa9/0xaf0
__btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
btrfs_evict_inode+0x40d/0x560 [btrfs]
evict+0xd9/0x1c0
dispose_list+0x48/0x70
prune_icache_sb+0x54/0x80
super_cache_scan+0x124/0x1a0
do_shrink_slab+0x176/0x440
shrink_slab+0x23a/0x2c0
shrink_node+0x188/0x6e0
balance_pgdat+0x31d/0x7f0
kswapd+0x238/0x550
kthread+0x120/0x140
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> pcpu_alloc_mutex --> fs_reclaim
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(pcpu_alloc_mutex);
lock(fs_reclaim);
lock(&delayed_node->mutex);
*** DEADLOCK ***
3 locks held by kswapd0/91:
#0: (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
#1: (shrinker_rwsem){++++}, at: shrink_slab+0x12f/0x2c0
#2: (&type->s_umount_key#43){++++}, at: trylock_super+0x16/0x50
stack backtrace:
CPU: 1 PID: 91 Comm: kswapd0 Not tainted 5.6.0-rc7-btrfs-next-77 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack+0x8f/0xd0
check_noncircular+0x170/0x190
__lock_acquire+0xef0/0x1c80
lock_acquire+0xa2/0x1d0
__mutex_lock+0xa9/0xaf0
__btrfs_release_delayed_node.part.0+0x3f/0x320 [btrfs]
btrfs_evict_inode+0x40d/0x560 [btrfs]
evict+0xd9/0x1c0
dispose_list+0x48/0x70
prune_icache_sb+0x54/0x80
super_cache_scan+0x124/0x1a0
do_shrink_slab+0x176/0x440
shrink_slab+0x23a/0x2c0
shrink_node+0x188/0x6e0
balance_pgdat+0x31d/0x7f0
kswapd+0x238/0x550
kthread+0x120/0x140
ret_from_fork+0x3a/0x50
This could be fixed by making btrfs pass GFP_NOFS instead of GFP_KERNEL
to percpu_counter_init() in contextes where it is not reclaim safe,
however that type of approach is discouraged since
memalloc_[nofs|noio]_save() were introduced. Therefore this change
makes pcpu_alloc() look up into an existing nofs/noio context before
deciding whether it is in an atomic context or not.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Link: http://lkml.kernel.org/r/20200430164356.15543-1-fdmanana@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently there are 3 emails tied to me in the kernel tree, I'd rather
dennis@kernel.org be the only one.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Bitmaps are fairly popular for their space efficiency, but we don't have
generic iterators available. Make percpu's bitmap region iterators
available to everyone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct pcpu_alloc_info {
...
struct pcpu_group_info groups[];
};
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
So, replace the following form:
sizeof(*ai) + nr_groups * sizeof(ai->groups[0])
with:
struct_size(ai, groups, nr_groups)
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
pcpu_setup_first_chunk() will panic or BUG_ON if the are some
error and doesn't return any error, hence it can be defined to
return void.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
[Dennis: fixed kbuild warning for pcpu_page_first_chunk()]
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull percpu updates from Dennis Zhou:
- scan hint update which helps address performance issues with heavily
fragmented blocks
- lockdep fix when freeing an allocation causes balance work to be
scheduled
* 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: remove spurious lock dependency between percpu and sched
percpu: use chunk scan_hint to skip some scanning
percpu: convert chunk hints to be based on pcpu_block_md
percpu: make pcpu_block_md generic
percpu: use block scan_hint to only scan forward
percpu: remember largest area skipped during allocation
percpu: add block level scan_hint
percpu: set PCPU_BITMAP_BLOCK_SIZE to PAGE_SIZE
percpu: relegate chunks unusable when failing small allocations
percpu: manage chunks based on contig_bits instead of free_bytes
percpu: introduce helper to determine if two regions overlap
percpu: do not search past bitmap when allocating an area
percpu: update free path with correct new free region
In free_percpu() we sometimes call pcpu_schedule_balance_work() to
queue a work item (which does a wakeup) while holding pcpu_lock.
This creates an unnecessary lock dependency between pcpu_lock and
the scheduler's pi_lock. There are other places where we call
pcpu_schedule_balance_work() without hold pcpu_lock, and this case
doesn't need to be different.
Moving the call outside the lock prevents the following lockdep splat
when running tools/testing/selftests/bpf/{test_maps,test_progs} in
sequence with lockdep enabled:
======================================================
WARNING: possible circular locking dependency detected
5.1.0-dbg-DEV #1 Not tainted
------------------------------------------------------
kworker/23:255/18872 is trying to acquire lock:
000000000bc79290 (&(&pool->lock)->rlock){-.-.}, at: __queue_work+0xb2/0x520
but task is already holding lock:
00000000e3e7a6aa (pcpu_lock){..-.}, at: free_percpu+0x36/0x260
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (pcpu_lock){..-.}:
lock_acquire+0x9e/0x180
_raw_spin_lock_irqsave+0x3a/0x50
pcpu_alloc+0xfa/0x780
__alloc_percpu_gfp+0x12/0x20
alloc_htab_elem+0x184/0x2b0
__htab_percpu_map_update_elem+0x252/0x290
bpf_percpu_hash_update+0x7c/0x130
__do_sys_bpf+0x1912/0x1be0
__x64_sys_bpf+0x1a/0x20
do_syscall_64+0x59/0x400
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #3 (&htab->buckets[i].lock){....}:
lock_acquire+0x9e/0x180
_raw_spin_lock_irqsave+0x3a/0x50
htab_map_update_elem+0x1af/0x3a0
-> #2 (&rq->lock){-.-.}:
lock_acquire+0x9e/0x180
_raw_spin_lock+0x2f/0x40
task_fork_fair+0x37/0x160
sched_fork+0x211/0x310
copy_process.part.43+0x7b1/0x2160
_do_fork+0xda/0x6b0
kernel_thread+0x29/0x30
rest_init+0x22/0x260
arch_call_rest_init+0xe/0x10
start_kernel+0x4fd/0x520
x86_64_start_reservations+0x24/0x26
x86_64_start_kernel+0x6f/0x72
secondary_startup_64+0xa4/0xb0
-> #1 (&p->pi_lock){-.-.}:
lock_acquire+0x9e/0x180
_raw_spin_lock_irqsave+0x3a/0x50
try_to_wake_up+0x41/0x600
wake_up_process+0x15/0x20
create_worker+0x16b/0x1e0
workqueue_init+0x279/0x2ee
kernel_init_freeable+0xf7/0x288
kernel_init+0xf/0x180
ret_from_fork+0x24/0x30
-> #0 (&(&pool->lock)->rlock){-.-.}:
__lock_acquire+0x101f/0x12a0
lock_acquire+0x9e/0x180
_raw_spin_lock+0x2f/0x40
__queue_work+0xb2/0x520
queue_work_on+0x38/0x80
free_percpu+0x221/0x260
pcpu_freelist_destroy+0x11/0x20
stack_map_free+0x2a/0x40
bpf_map_free_deferred+0x3c/0x50
process_one_work+0x1f7/0x580
worker_thread+0x54/0x410
kthread+0x10f/0x150
ret_from_fork+0x24/0x30
other info that might help us debug this:
Chain exists of:
&(&pool->lock)->rlock --> &htab->buckets[i].lock --> pcpu_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pcpu_lock);
lock(&htab->buckets[i].lock);
lock(pcpu_lock);
lock(&(&pool->lock)->rlock);
*** DEADLOCK ***
3 locks held by kworker/23:255/18872:
#0: 00000000b36a6e16 ((wq_completion)events){+.+.},
at: process_one_work+0x17a/0x580
#1: 00000000dfd966f0 ((work_completion)(&map->work)){+.+.},
at: process_one_work+0x17a/0x580
#2: 00000000e3e7a6aa (pcpu_lock){..-.},
at: free_percpu+0x36/0x260
stack backtrace:
CPU: 23 PID: 18872 Comm: kworker/23:255 Not tainted 5.1.0-dbg-DEV #1
Hardware name: ...
Workqueue: events bpf_map_free_deferred
Call Trace:
dump_stack+0x67/0x95
print_circular_bug.isra.38+0x1c6/0x220
check_prev_add.constprop.50+0x9f6/0xd20
__lock_acquire+0x101f/0x12a0
lock_acquire+0x9e/0x180
_raw_spin_lock+0x2f/0x40
__queue_work+0xb2/0x520
queue_work_on+0x38/0x80
free_percpu+0x221/0x260
pcpu_freelist_destroy+0x11/0x20
stack_map_free+0x2a/0x40
bpf_map_free_deferred+0x3c/0x50
process_one_work+0x1f7/0x580
worker_thread+0x54/0x410
kthread+0x10f/0x150
ret_from_fork+0x24/0x30
Signed-off-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Since commit ad67b74d24 ("printk: hash addresses printed with %p"),
at boot "____ptrval____" is printed instead of actual addresses:
percpu: Embedded 38 pages/cpu @(____ptrval____) s124376 r0 d31272 u524288
Instead of changing the print to "%px", and leaking kernel addresses,
just remove the print completely, cfr. e.g. commit 071929dbdd
("arm64: Stop printing the virtual memory layout").
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Just like blocks, chunks now maintain a scan_hint. This can be used to
skip some scanning by promoting the scan_hint to be the contig_hint.
The chunk's scan_hint is primarily updated on the backside and relies on
full scanning when a block becomes free or the free region spans across
blocks.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
As mentioned in the last patch, a chunk's hints are no different than a
block just responsible for more bits. This converts chunk level hints to
use a pcpu_block_md to maintain them. This lets us reuse the same hint
helper functions as a block. The left_free and right_free are unused by
the chunk's pcpu_block_md.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In reality, a chunk is just a block covering a larger number of bits.
The hints themselves are one in the same. Rather than maintaining the
hints separately, first introduce nr_bits to genericize
pcpu_block_update() to correctly maintain block->right_free. The next
patch will convert chunk hints to be managed as a pcpu_block_md.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Blocks now remember the latest scan_hint. This can be used on the
allocation path as when a contig_hint is broken, we can promote the
scan_hint to the contig_hint and scan forward from there. This works
because pcpu_block_refresh_hint() is only called on the allocation path
while block free regions are updated manually in
pcpu_block_update_hint_free().
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Percpu allocations attempt to do first fit by scanning forward from the
first_free of a block. However, fragmentation from allocation requests
can cause holes not seen by block hint update functions. To address
this, create a local version of bitmap_find_next_zero_area_off() that
remembers the largest area skipped over. The caveat is that it only sees
regions skipped over due to not fitting, not regions skipped due to
alignment.
Prior to updating the scan_hint, a scan backwards is done to try and
recover free bits skipped due to alignment. While this can cause
scanning to miss earlier possible free areas, smaller allocations will
eventually fill those holes due to first fit.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Fragmentation can cause both blocks and chunks to have an early
first_firee bit available, but only able to satisfy allocations much
later on. This patch introduces a scan_hint to help mitigate some
unnecessary scanning.
The scan_hint remembers the largest area prior to the contig_hint. If
the contig_hint == scan_hint, then scan_hint_start > contig_hint_start.
This is necessary for scan_hint discovery when refreshing a block.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Previously, block size was flexible based on the constraint that the
GCD(PCPU_BITMAP_BLOCK_SIZE, PAGE_SIZE) > 1. However, this carried the
overhead that keeping a floating number of populated free pages required
scanning over the free regions of a chunk.
Setting the block size to be fixed at PAGE_SIZE lets us know when an
empty page becomes used as we will break a full contig_hint of a block.
This means we no longer have to scan the whole chunk upon breaking a
contig_hint which empty page management piggybacked off. A later patch
takes advantage of this to optimize the allocation path by only scanning
forward using the scan_hint introduced later too.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
In certain cases, requestors of percpu memory may want specific
alignments. However, it is possible to end up in situations where the
contig_hint matches, but the alignment does not. This causes excess
scanning of chunks that will fail. To prevent this, if a small
allocation fails (< 32B), the chunk is moved to the empty list. Once an
allocation is freed from that chunk, it is placed back into rotation.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
When a chunk becomes fragmented, it can end up having a large number of
small allocation areas free. The free_bytes sorting of chunks leads to
unnecessary checking of chunks that cannot satisfy the allocation.
Switch to contig_bits sorting to prevent scanning chunks that may not be
able to service the allocation request.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
While block hints were always accurate, it's possible when spanning
across blocks that we miss updating the chunk's contig_hint. Rather than
rely on correctness of the boundaries of hints, do a full overlap
comparison.
A future patch introduces the scan_hint which makes the contig_hint
slightly fuzzy as they can at times be smaller than the actual hint.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
pcpu_find_block_fit() guarantees that a fit is found within
PCPU_BITMAP_BLOCK_BITS. Iteration is used to determine the first fit as
it compares against the block's contig_hint. This can lead to
incorrectly scanning past the end of the bitmap. The behavior was okay
given the check after for bit_off >= end and the correctness of the
hints from pcpu_find_block_fit().
This patch fixes this by bounding the end offset by the number of bits
in a chunk.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
When updating the chunk's contig_hint on the free path of a hint that
does not touch the page boundaries, it was incorrectly using the
starting offset of the free region and the block's contig_hint. This
could lead to incorrect assumptions about fit given a size and better
alignment of the start. Fix this by using (end - start) as this is only
called when updating a hint within a block.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
As all the memblock allocation functions return NULL in case of error
rather than panic(), the duplicates with _nopanic suffix can be removed.
Link: http://lkml.kernel.org/r/1548057848-15136-22-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Petr Mladek <pmladek@suse.com> [printk]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add panic() calls if memblock_alloc() returns NULL.
The panic() format duplicates the one used by memblock itself and in
order to avoid explosion with long parameters list replace open coded
allocation size calculations with a local variable.
Link: http://lkml.kernel.org/r/1548057848-15136-17-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
group_cnt array is defined with NR_CPUS entries, but normally
nr_groups will not reach up to NR_CPUS. So there is no issue
to the current code.
Checking other parts of pcpu_build_alloc_info, use nr_groups as
check condition, so make it consistent to use 'group < nr_groups'
as for loop check. In case we do have nr_groups equals with NR_CPUS,
we could also avoid memory access out of bounds.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Pull percpu fixes from Dennis Zhou:
"Two small things for v4.20.
The first fixes a clang uninitialized variable warning for arm64 in
the default path calls BUILD_BUG(). The second removes an unnecessary
unlikely() in a WARN_ON() use"
* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
arm64: percpu: Initialize ret in the default case
mm: percpu: remove unnecessary unlikely()
When a memblock allocation APIs are called with align = 0, the alignment
is implicitly set to SMP_CACHE_BYTES.
Implicit alignment is done deep in the memblock allocator and it can
come as a surprise. Not that such an alignment would be wrong even
when used incorrectly but it is better to be explicit for the sake of
clarity and the prinicple of the least surprise.
Replace all such uses of memblock APIs with the 'align' parameter
explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment
in the memblock internal allocation functions.
For the case when memblock APIs are used via helper functions, e.g. like
iommu_arena_new_node() in Alpha, the helper functions were detected with
Coccinelle's help and then manually examined and updated where
appropriate.
The direct memblock APIs users were updated using the semantic patch below:
@@
expression size, min_addr, max_addr, nid;
@@
(
|
- memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr,
nid)
|
- memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid)
+ memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid)
|
- memblock_alloc(size, 0)
+ memblock_alloc(size, SMP_CACHE_BYTES)
|
- memblock_alloc_raw(size, 0)
+ memblock_alloc_raw(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from(size, 0, min_addr)
+ memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_nopanic(size, 0)
+ memblock_alloc_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low(size, 0)
+ memblock_alloc_low(size, SMP_CACHE_BYTES)
|
- memblock_alloc_low_nopanic(size, 0)
+ memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES)
|
- memblock_alloc_from_nopanic(size, 0, min_addr)
+ memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr)
|
- memblock_alloc_node(size, 0, nid)
+ memblock_alloc_node(size, SMP_CACHE_BYTES, nid)
)
[mhocko@suse.com: changelog update]
[akpm@linux-foundation.org: coding-style fixes]
[rppt@linux.ibm.com: fix missed uses of implicit alignment]
Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx
Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Richard Weinberger <richard@nod.at>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit ca460b3c96 ("percpu: introduce bitmap metadata blocks")
introduced bitmap metadata blocks. These metadata blocks are allocated
whenever a new chunk is created, but they are never freed. Fix it.
Fixes: ca460b3c96 ("percpu: introduce bitmap metadata blocks")
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Zhou <dennis@kernel.org>
WARN_ON() already contains an unlikely(), so it's not necessary to
wrap it into another.
Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: zijun_hu <zijun_hu@htc.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Currently, percpu memory only exposes allocation and utilization
information via debugfs. This more or less is only really useful for
understanding the fragmentation and allocation information at a per-chunk
level with a few global counters. This is also gated behind a config.
BPF and cgroup, for example, have seen an increase in use causing
increased use of percpu memory. Let's make it easier for someone to
identify how much memory is being used.
This patch adds the "Percpu" stat to meminfo to more easily look up how
much percpu memory is in use. This number includes the cost for all
allocated backing pages and not just insight at the per a unit, per chunk
level. Metadata is excluded. I think excluding metadata is fair because
the backing memory scales with the numbere of cpus and can quickly
outweigh the metadata. It also makes this calculation light.
Link: http://lkml.kernel.org/r/20180807184723.74919-1-dennisszhou@gmail.com
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This removes the entire architecture code for blackfin, cris, frv, m32r,
metag, mn10300, score, and tile, including the associated device drivers.
I have been working with the (former) maintainers for each one to ensure
that my interpretation was right and the code is definitely unused in
mainline kernels. Many had fond memories of working on the respective
ports to start with and getting them included in upstream, but also saw
no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company
in charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
that all the SoC product lines are still around, but have not used the
custom CPU architectures for several years at this point. In contrast,
CPU instruction sets that remain popular and have actively maintained
kernel ports tend to all be used across multiple licensees.
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I made
sure that they are all unused. Some architectures (notably tile, mn10300,
and blackfin) are still being shipped in products with old kernels,
but those products will never be updated to newer kernel releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing their
support or getting it added to mainline gcc in the first place.
They all have patched gcc-7.3 ports that work to some degree, but
complete upstream support won't happen before gcc-8.1. Csky posted
their first kernel patch set last week, their situation will be similar.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fQ8z
-----END PGP SIGNATURE-----
Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pul removal of obsolete architecture ports from Arnd Bergmann:
"This removes the entire architecture code for blackfin, cris, frv,
m32r, metag, mn10300, score, and tile, including the associated device
drivers.
I have been working with the (former) maintainers for each one to
ensure that my interpretation was right and the code is definitely
unused in mainline kernels. Many had fond memories of working on the
respective ports to start with and getting them included in upstream,
but also saw no point in keeping the port alive without any users.
In the end, it seems that while the eight architectures are extremely
different, they all suffered the same fate: There was one company in
charge of an SoC line, a CPU microarchitecture and a software
ecosystem, which was more costly than licensing newer off-the-shelf
CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
seems that all the SoC product lines are still around, but have not
used the custom CPU architectures for several years at this point. In
contrast, CPU instruction sets that remain popular and have actively
maintained kernel ports tend to all be used across multiple licensees.
[ See the new nds32 port merged in the previous commit for the next
generation of "one company in charge of an SoC line, a CPU
microarchitecture and a software ecosystem" - Linus ]
The removal came out of a discussion that is now documented at
https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
marking any ports as deprecated but remove them all at once after I
made sure that they are all unused. Some architectures (notably tile,
mn10300, and blackfin) are still being shipped in products with old
kernels, but those products will never be updated to newer kernel
releases.
After this series, we still have a few architectures without mainline
gcc support:
- unicore32 and hexagon both have very outdated gcc releases, but the
maintainers promised to work on providing something newer. At least
in case of hexagon, this will only be llvm, not gcc.
- openrisc, risc-v and nds32 are still in the process of finishing
their support or getting it added to mainline gcc in the first
place. They all have patched gcc-7.3 ports that work to some
degree, but complete upstream support won't happen before gcc-8.1.
Csky posted their first kernel patch set last week, their situation
will be similar
[ Palmer Dabbelt points out that RISC-V support is in mainline gcc
since gcc-7, although gcc-7.3.0 is the recommended minimum - Linus ]"
This really says it all:
2498 files changed, 95 insertions(+), 467668 deletions(-)
* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
MAINTAINERS: UNICORE32: Change email account
staging: iio: remove iio-trig-bfin-timer driver
tty: hvc: remove tile driver
tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
serial: remove tile uart driver
serial: remove m32r_sio driver
serial: remove blackfin drivers
serial: remove cris/etrax uart drivers
usb: Remove Blackfin references in USB support
usb: isp1362: remove blackfin arch glue
usb: musb: remove blackfin port
usb: host: remove tilegx platform glue
pwm: remove pwm-bfin driver
i2c: remove bfin-twi driver
spi: remove blackfin related host drivers
watchdog: remove bfin_wdt driver
can: remove bfin_can driver
mmc: remove bfin_sdh driver
input: misc: remove blackfin rotary driver
input: keyboard: remove bf54x driver
...
A lot of Kconfig symbols have architecture specific dependencies.
In those cases that depend on architectures we have already removed,
they can be omitted.
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In case of memory deficit and low percpu memory pages,
pcpu_balance_workfn() takes pcpu_alloc_mutex for a long
time (as it makes memory allocations itself and waits
for memory reclaim). If tasks doing pcpu_alloc() are
choosen by OOM killer, they can't exit, because they
are waiting for the mutex.
The patch makes pcpu_alloc() to care about killing signal
and use mutex_lock_killable(), when it's allowed by GFP
flags. This guarantees, a task does not miss SIGKILL
from OOM killer.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
microblaze build broke due to missing declaration of the
cond_resched() invocation added recently. Let's include linux/sched.h
explicitly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
When a large BPF percpu map is destroyed, I have seen
pcpu_balance_workfn() holding cpu for hundreds of milliseconds.
On KASAN config and 112 hyperthreads, average time to destroy a chunk
is ~4 ms.
[ 2489.841376] destroy chunk 1 in 4148689 ns
...
[ 2490.093428] destroy chunk 32 in 4072718 ns
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The prior patch added support for passing gfp flags through to the
underlying allocators. This patch allows users to pass along gfp flags
(currently only __GFP_NORETRY and __GFP_NOWARN) to the underlying
allocators. This should allow users to decide if they are ok with
failing allocations recovering in a more graceful way.
Additionally, gfp passing was done as additional flags in the previous
patch. Instead, change this to caller passed semantics. GFP_KERNEL is
also removed as the default flag. It continues to be used for internally
caused underlying percpu allocations.
V2:
Removed gfp_percpu_mask in favor of doing it inline.
Removed GFP_KERNEL as a default flag for __alloc_percpu_gfp.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Percpu memory using the vmalloc area based chunk allocator lazily
populates chunks by first requesting the full virtual address space
required for the chunk and subsequently adding pages as allocations come
through. To ensure atomic allocations can succeed, a workqueue item is
used to maintain a minimum number of empty pages. In certain scenarios,
such as reported in [1], it is possible that physical memory becomes
quite scarce which can result in either a rather long time spent trying
to find free pages or worse, a kernel panic.
This patch adds support for __GFP_NORETRY and __GFP_NOWARN passing them
through to the underlying allocators. This should prevent any
unnecessary panics potentially caused by the workqueue item. The passing
of gfp around is as additional flags rather than a full set of flags.
The next patch will change these to caller passed semantics.
V2:
Added const modifier to gfp flags in the balance path.
Removed an extra whitespace.
[1] https://lkml.org/lkml/2018/2/12/551
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Reported-by: syzbot+adb03f3f0bb57ce3acda@syzkaller.appspotmail.com
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
At some point the function declaration parameters got out of sync with
the function definitions in percpu-vm.c and percpu-km.c. This patch
makes them match again.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Acked-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 438a506180 ("percpu: don't forget to free the temporary struct
pcpu_alloc_info") uncovered a problem on the CRIS architecture where
the bootmem allocator is initialized with virtual addresses. Given it
has:
#define __va(x) ((void *)((unsigned long)(x) | 0x80000000))
then things just work out because the end result is the same whether you
give this a physical or a virtual address.
Untill you call memblock_free_early(__pa(address)) that is, because
values from __pa() don't match with the virtual addresses stuffed in the
bootmem allocator anymore.
Avoid freeing the temporary pcpu_alloc_info memory on that architecture
until they fix things up to let the kernel boot like it did before.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 438a506180 ("percpu: don't forget to free the temporary struct pcpu_alloc_info")
Pull percpu update from Tejun Heo:
"Another minor pull request. It only contains one commit which can
reclaim a bit of memory wasted during boot on UP"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: don't forget to free the temporary struct pcpu_alloc_info
Add an option for pcpu_alloc() to support __GFP_NOWARN flag.
Currently, we always throw a warning when size or alignment
is unsupported (and also dump stack on failed allocation
requests). The warning itself is harmless since we return
NULL anyway for any failed request, which callers are
required to handle anyway. However, it becomes harmful when
panic_on_warn is set.
The rationale for the WARN() in pcpu_alloc() is that it can
be tracked when larger than supported allocation requests are
made such that allocations limits can be tweaked if warranted.
This makes sense for in-kernel users, however, there are users
of pcpu allocator where allocation size is derived from user
space requests, e.g. when creating BPF maps. In these cases,
the requests should fail gracefully without throwing a splat.
The current work-around was to check allocation size against
the upper limit of PCPU_MIN_UNIT_SIZE from call-sites for
bailing out prior to a call to pcpu_alloc() in order to
avoid throwing the WARN(). This is bad in multiple ways since
PCPU_MIN_UNIT_SIZE is an implementation detail, and having
the checks on call-sites only complicates the code for no
good reason. Thus, lets fix it generically by supporting the
__GFP_NOWARN flag that users can then use with calling the
__alloc_percpu_gfp() helper instead.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike the SMP case, the !SMP case does not free the memory for struct
pcpu_alloc_info allocated in setup_per_cpu_areas(). And to give it a
chance of being reused by the page allocator later, align it to a page
boundary just like its size.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The iterator functions pcpu_next_md_free_region and
pcpu_next_fit_region use the block offset to determine if they have
checked the area in the prior iteration. However, this causes an issue
when the block offset is greater than subsequent block contig hints. If
within the iterator it moves to check subsequent blocks, it may fail in
the second predicate due to the block offset not being cleared. Thus,
this causes the allocator to skip over blocks leading to false failures
when allocating from the reserved chunk. While this happens in the
general case as well, it will only fail if it cannot allocate a new
chunk.
This patch resets the block offset to 0 to pass the second predicate
when checking subseqent blocks within the iterator function.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reported-and-tested-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The other patches contain a lot of information, so adding this
information in a separate patch. It adds my copyright and a brief
explanation of how the bitmap allocator works. There is a minor typo as
well in the prior explanation so that is fixed.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The simple, and expensive, way to find a free area is to iterate over
the entire bitmap until an area is found that fits the allocation size
and alignment. This patch makes use of an iterate that find an area to
check by using the block level contig hints. It will only return an area
that can fit the size and alignment request. If the request can fit
inside a block, it returns the first_free bit to start checking from to
see if it can be fulfilled prior to the contig hint. The pcpu_alloc_area
check has a bound of a block size added in case it is wrong.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The largest free region will either be a block level contig hint or an
aggregate over the left_free and right_free areas of blocks. This is a
much smaller set of free areas that need to be checked than a full
traverse.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The bitmap allocator must keep metadata consistent. The easiest way is
to scan after every allocation for each affected block and the entire
chunk. This is rather expensive.
The free path can take advantage of current contig hints to prevent
scanning within the start and end block. If a scan is needed, it can
be done by scanning backwards from the start and forwards from the end
to identify the entire free area this can be combined with. The blocks
can then be updated by some basic checks rather than complete block
scans.
A chunk scan happens when the freed area makes a page free, a block
free, or spans across blocks. This is necessary as the contig hint at
this point could span across blocks. The check uses the minimum of page
size and the block size to allow for variable sized blocks. There is a
tradeoff here with not updating after every free. It is possible a
contig hint in one block can be merged with the contig hint in the next
block. This means the contig hint can be off by up to a page. However,
if the chunk's contig hint is contained in one block, the contig hint
will be accurate.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Metadata is kept per block to keep track of where the contig hints are.
Scanning can be avoided when the contig hints are not broken. In that
case, left and right contigs have to be managed manually.
This patch changes the allocation path hint updating to only scan when
contig hints are broken.
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
