* acpi-pm:
spi: attach/detach SPI device to the ACPI power domain
i2c: attach/detach I2C client device to the ACPI power domain
ACPI / PM: allow child devices to ignore parent power state
* acpica:
MAINTAINERS / ACPICA: Add ACPICA information to MAINTAINERS
ACPICA: Update version to 20130823.
ACPICA: SCI Handlers: Update handler interface, eliminate unnecessary argument.
ACPICA: Cleanup exception codes.
ACPICA: Tables: Cleanup RSDP signature codes.
ACPICA: Tables: Cleanup table checksum verification code.
ACPICA: Debugger: Add new command to display full namespace pathnames.
ACPICA: Operation region support: Never free the handler "context" pointer.
ACPICA: Add support for host-installed SCI handlers.
ACPICA: Validate start object for acpi_walk_namespace.
ACPICA: Debugger: Prevent possible command line buffer overflow, kernel behavior is not affected.
ACPICA: Linux-specific header: enable "aarch64" 64-bit build.
ACPICA: Debug output: small formatting update, no functional change.
ACPICA: acpi_read: On error, do not modify the return value target location.
ACPICA: Improve error message for "too many parent prefixes" condition.
* acpi-conversion:
ACPI / AC: Remove AC's proc directory.
ideapad_laptop: convert ideapad device/driver to platform bus
ideapad_laptop: remove ideapad_handle and ideapad_priv
ideapad_laptop: convert internal function calls to use ideapad_private as parameter
ideapad_laptop: introduce struct acpi_device pointer to ideapad_private structure
ideapad_laptop: introduce #ifdef CONFIG_PM_SLEEP for PM specific code
ACPI / AC: convert ACPI ac driver to platform bus
* acpi-hotplug:
ACPI / memhotplug: Use defined marco METHOD_NAME__STA
ACPI / hotplug: Use kobject_init_and_add() instead of _init() and _add()
ACPI / hotplug: Don't set kobject parent pointer explicitly
ACPI / hotplug: Set kobject name via kobject_add(), not kobject_set_name()
hotplug, powerpc, x86: Remove cpu_hotplug_driver_lock()
hotplug / x86: Disable ARCH_CPU_PROBE_RELEASE on x86
hotplug / x86: Add hotplug lock to missing places
hotplug / x86: Fix online state in cpu0 debug interface
Two functions defined in device_pm.c, acpi_dev_pm_add_dependent()
and acpi_dev_pm_remove_dependent(), have no callers and may be
dropped, so drop them.
Moreover, they are the only functions adding entries to and removing
entries from the power_dependent list in struct acpi_device, so drop
that list too.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The mechanism causing devices depending on a given power resource
(that is, devices that can be in D0 only if that power resource is
on) to be resumed automatically when the power resource is turned
on (and their "inferred" power state becomes D0 as a result) is
inherently racy and in fact unnecessary.
It is racy, because if the power resource is turned on and then
immediately off, the device resume triggered by the first transition
to "on" may still happen, causing the power resource to be turned
on again. That again will trigger the "resume of dependent devices"
mechanism, but if the devices in question are not in use, they will
be suspended in the meantime causing the power resource to be turned
off. However, the "resume of dependent devices" will next resume
them again and so on. In some cases (USB port PM in particular) that
leads to an endless busy loop of flipping the resource on and off
continuously.
It is needless, because whoever turns a power resource on will most
likely turn it off at some point and the devices that go into "D0"
as a result of turning it on will then go back into D3cold
(generally, the state they were in before).
Moreover, turning on all power resources a device needs to go into
D0 is not sufficient for a full transition into D0 in general.
Namely, _PS0 may need to be executed in addition to that in some
cases. This means that the whole rationale of the "resume of
dependent devices" mechanism was incorrect to begin with and it's
best to remove it entirely.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AC's proc directory is not used and so remove it. Prepare for removing
/proc/acpi directory.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 1696d9d (ACPI: Remove the old /proc/acpi/event interface)
left /proc/acpi/event in the ACPI_BUTTON help in Kconfig, so
remove it from there.
[rjw: Changelog]
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In acpi_resume_power_resources() resource_lock should be released
when acpi_power_get_state() fails and before passing to next power
resource on the list.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Alarm proc file provides the info and control of RTC-CMOS alarm and
RTC CMOS driver provides wakealarm sysfs attribute for the same
purpose. The alarm file isn't compiled into kernel when RTC CMOS
driver is selected. The driver is default to be selected for x86
platform. So alarm file is default not to include. This patch is
to remove it to prepare remove /proc/acpi directory.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no user of cm_sbs.c and CONFIG_ACPI_PROCFS_POWER. So remove
them. Prepare for removing /proc/acpi
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
SBS's proc directory isn't useded and so remove it. Prepare for removing
/proc/acpi directory.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The battery's proc directory isn't useded and remove it.
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some links to projects web pages and e-mail addresses in ACPI/PM
documentation and Kconfig are outdated, so update them.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some serial buses like I2C and SPI don't require that the parent device is
in D0 before any of its children transitions to D0, but instead the parent
device can control its own power independently from the children.
This does not follow the ACPI specification as it requires the parent to be
powered on before its children. However, Windows seems to ignore this
requirement so I think we can do the same in Linux.
Implement this by adding a new power flag 'ignore_parent' to struct
acpi_device. If this flag is set the ACPI core ignores checking of the
parent device power state when the device is powered on/off.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We already have predefined marco for method name "_STA', so
using the marco instead of directly using the string.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fixed a brace coding style issue. (Brace not on the good line)
Signed-off-by: Mathieu Rhéaume <mathieu@codingrhemes.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit caf5c03f (ACPI: Move acpi_bus_get_device() from bus.c to
scan.c) caused acpi_bus_get_device() to be exported using
EXPORT_SYMBOL_GPL(), but that broke some binary drivers in
existence, so revert that change.
Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use kobject_init_and_add() since we have nothing special to do between
kobject_init() and kobject_add().
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
kobject_add() sets the parent pointer, so we don't need to do it
explicitly.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set the kobject name via kobject_add() instead of using kobject_set_name(),
which is deprecated per Documentation/kobject.txt.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch only introduces indentation cleanups. No functional changes.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch:
1. Deletes duplicate Kconfig dependency as there is "if IPMI_HANDLER"
around "IPMI_SI".
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch:
1. Deletes several useless header inclusions.
2. Kernel codes should always include <linux/acpi.h> instead of
<acpi/acpi_bus.h> or <acpi/acpi_drivers.h> where many conditional
declarations are handled.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch.
1. Changes dynamic mutex initialization to static initialization.
2. Removes one acpi_ipmi_init() variable initialization as it is not
needed.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This (trivial) patch:
1. Deletes a member of the acpi_ipmi_device, smi_data, which is not
actually used.
2. Updates a member of the acpi_ipmi_device, pnp_dev, which is only used
by dev_warn() invocations, so changes it to a struct device.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds reference counting for ACPI IPMI transfers to tune the
locking granularity of tx_msg_lock.
This patch also makes the whole acpi_ipmi module's coding style consistent
by using reference counting for all its objects (i.e., acpi_ipmi_device and
acpi_ipmi_msg).
The acpi_ipmi_msg handling is re-designed using referece counting.
1. tx_msg is always unlinked before complete(), so that it is safe to put
complete() out side of tx_msg_lock.
2. tx_msg reference counters are incremented before calling
ipmi_request_settime() and tx_msg_lock protection is added to
ipmi_cancel_tx_msg() so that a complete() can be safely called in
parellel with tx_msg unlinking in failure cases.
3. tx_msg holds a reference to acpi_ipmi_device so that it can be flushed
and freed in the contexts other than acpi_ipmi_space_handler().
The lockdep_chains shows all acpi_ipmi locks are leaf locks after the
tuning:
1. ipmi_lock is always leaf:
irq_context: 0
[ffffffff81a943f8] smi_watchers_mutex
[ffffffffa06eca60] driver_data.ipmi_lock
irq_context: 0
[ffffffff82767b40] &buffer->mutex
[ffffffffa00a6678] s_active#103
[ffffffffa06eca60] driver_data.ipmi_lock
2. without this patch applied, lock used by complete() is held after
holding tx_msg_lock:
irq_context: 0
[ffffffff82767b40] &buffer->mutex
[ffffffffa00a6678] s_active#103
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
[ffffffffa06eccf0] &x->wait#25
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
[ffffffffa06eccf0] &x->wait#25
[ffffffff81e36620] &p->pi_lock
irq_context: 1
[ffffffffa06ecce8] &(&ipmi_device->tx_msg_lock)->rlock
[ffffffffa06eccf0] &x->wait#25
[ffffffff81e36620] &p->pi_lock
[ffffffff81e5d0a8] &rq->lock
3. with this patch applied, tx_msg_lock is always leaf:
irq_context: 0
[ffffffff82767b40] &buffer->mutex
[ffffffffa00a66d8] s_active#107
[ffffffffa07ecdc8] &(&ipmi_device->tx_msg_lock)->rlock
irq_context: 1
[ffffffffa07ecdc8] &(&ipmi_device->tx_msg_lock)->rlock
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is found on a real machine, in its ACPI namespace, the IPMI
OperationRegions (in the ACPI000D - ACPI power meter) are not defined under
the IPMI system interface device (the IPI0001 with KCS type returned from
_IFT control method):
Device (PMI0)
{
Name (_HID, "ACPI000D") // _HID: Hardware ID
OperationRegion (SYSI, IPMI, 0x0600, 0x0100)
Field (SYSI, BufferAcc, Lock, Preserve)
{
AccessAs (BufferAcc, 0x01),
Offset (0x58),
SCMD, 8,
GCMD, 8
}
OperationRegion (POWR, IPMI, 0x3000, 0x0100)
Field (POWR, BufferAcc, Lock, Preserve)
{
AccessAs (BufferAcc, 0x01),
Offset (0xB3),
GPMM, 8
}
}
Device (PCI0)
{
Device (ISA)
{
Device (NIPM)
{
Name (_HID, EisaId ("IPI0001")) // _HID: Hardware ID
Method (_IFT, 0, NotSerialized) // _IFT: IPMI Interface Type
{
Return (0x01)
}
}
}
}
Current ACPI_IPMI code registers IPMI operation region handler on a
per-device basis, so for the above namespace the IPMI operation region
handler is registered only under the scope of \_SB.PCI0.ISA.NIPM. Thus
when an IPMI operation region field of \PMI0 is accessed, there are errors
reported on such platform:
ACPI Error: No handlers for Region [IPMI]
ACPI Error: Region IPMI(7) has no handler
The solution is to install an IPMI operation region handler from root node
so that every object that defines IPMI OperationRegion can get an address
space handler registered.
When an IPMI operation region field is accessed, the Network Function
(0x06 for SYSI and 0x30 for POWR) and the Command (SCMD, GCMD, GPMM) are
passed to the operation region handler, there is no system interface
specified by the BIOS. The patch tries to select one system interface by
monitoring the system interface notification. IPMI messages passed from
the ACPI codes are sent to this selected global IPMI system interface.
The ACPI_IPMI will always select the first registered IPMI interface
with an ACPI handle (i.e., defined in the ACPI namespace). It's hard to
determine the selection when there are multiple IPMI system interfaces
defined in the ACPI namespace. According to the IPMI specification:
A BMC device may make available multiple system interfaces, but only one
management controller is allowed to be 'active' BMC that provides BMC
functionality for the system (in case of a 'partitioned' system, there
can be only one active BMC per partition). Only the system interface(s)
for the active BMC allowed to respond to the 'Get Device Id' command.
According to the ipmi_si desigin:
The ipmi_si registeration notifications can only happen after a
successful "Get Device ID" command.
Thus it should be OK for non-partitioned systems to do such selection.
However, we do not have much knowledge on 'partitioned' systems.
References: https://bugzilla.kernel.org/show_bug.cgi?id=46741
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch uses reference counting to fix the race caused by the
unprotected ACPI IPMI user.
There are two rules for using the ipmi_si APIs:
1. In ipmi_si, ipmi_destroy_user() can ensure that no ipmi_recv_msg will
be passed to ipmi_msg_handler(), but ipmi_request_settime() can not
use an invalid ipmi_user_t. This means the ipmi_si users must ensure
that there won't be any local references on ipmi_user_t before invoking
ipmi_destroy_user().
2. In ipmi_si, the smi_gone()/new_smi() callbacks are protected by
smi_watchers_mutex, so their execution is serialized. But as a
new smi can re-use a freed intf_num, it requires that the callback
implementation must not use intf_num as an identification mean or it
must ensure all references to the previous smi are all dropped before
exiting smi_gone() callback.
As the acpi_ipmi_device->user_interface check in acpi_ipmi_space_handler()
can happen before setting user_interface to NULL and codes after the check
in acpi_ipmi_space_handler() can happen after user_interface becomes NULL,
the on-going acpi_ipmi_space_handler() still can pass an invalid
acpi_ipmi_device->user_interface to ipmi_request_settime(). Such race
conditions are not allowed by the IPMI layer's API design as a crash will
happen in ipmi_request_settime() if something like that happens.
This patch follows the ipmi_devintf.c design:
1. Invoke ipmi_destroy_user() after the reference count of
acpi_ipmi_device drops to 0. References of acpi_ipmi_device dropping
to 0 also means tx_msg related to this acpi_ipmi_device are all freed.
This matches the IPMI layer's API calling rule on ipmi_destroy_user()
and ipmi_request_settime().
2. ipmi_flush_tx_msg() is performed so that no on-going tx_msg can still be
running in acpi_ipmi_space_handler(). And it is invoked after invoking
__ipmi_dev_kill() where acpi_ipmi_device is deleted from the list with a
"dead" flag set, and the "dead" flag check is also introduced to the
point where a tx_msg is going to be added to the tx_msg_list so that no
new tx_msg can be created after returning from the __ipmi_dev_kill().
3. The waiting codes in ipmi_flush_tx_msg() is deleted because it is not
required since this patch ensures no acpi_ipmi reference is still held
for ipmi_user_t before calling ipmi_destroy_user() and
ipmi_destroy_user() can ensure no more ipmi_msg_handler() can happen
after returning from ipmi_destroy_user().
4. The flushing of tx_msg is also moved out of ipmi_lock in this patch.
The forthcoming IPMI operation region handler installation changes also
requires acpi_ipmi_device be handled in this style.
The header comment of the file is also updated due to this design change.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes races caused by timed out ACPI IPMI transfers.
This patch uses timeout mechanism provided by ipmi_si to avoid the race
that the msg_done flag is set but without any protection, its content can
be invalid. Thanks for the suggestion of Corey Minyard.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes races caused by unprotected ACPI IPMI transfers.
We can see that the following crashes may occur:
1. There is no tx_msg_lock held for iterating tx_msg_list in
ipmi_flush_tx_msg() while it may be unlinked on failure in
parallel in acpi_ipmi_space_handler() under tx_msg_lock.
2. There is no lock held for freeing tx_msg in acpi_ipmi_space_handler()
while it may be accessed in parallel in ipmi_flush_tx_msg() and
ipmi_msg_handler().
This patch enhances tx_msg_lock to protect all tx_msg accesses to solve
this issue. Then tx_msg_lock is always held around complete() and tx_msg
accesses.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch enhances sanity checks on message size to avoid potential buffer
overflow.
The kernel IPMI message size is IPMI_MAX_MSG_LENGTH(272 bytes) while the
ACPI specification defined IPMI message size is 64 bytes. The difference
is not handled by the original codes. This may cause crash in the response
handling codes.
This patch closes this gap and also combines rx_data/tx_data to use single
data/len pair since they need not be seperate.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch does two things,
1. enumerate the ideapad device node to platform bus.
2. convert the current driver from ACPI bus to platform bus.
Note, with this patch, the platform device node created by ACPI,
with the name VPC2004:00, is used as the parent device of
the input, backlight, rfkill sysfs class device.
Plus the ideapad_platform private sysfs attributes,
i.e. camera_power and fan_mode, are also moved to the new
platform device node.
The previous platform device node "ideapad" is removed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
CC: Matthew Garrett <matthew.garrett@nebula.com>
CC: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Current ACPI tables in initrd is limited to 10, that is too small.
64 should be good enough as we have 35 sigs and could have several
SSDT.
Two problems in current code prevent us from increasing limit:
1. The cpio file info array is put in stack, as every element is 32
bytes, could run out of stack if we have that array size to 64.
We can move it out from stack, make it global and put it into the
__initdata section.
2. early_ioremap() only can remap 256k one time. Current code maps
10 tables at a time. If we increased that limit, the whole size
could be more than 256k, so early_ioremap() would fail with that.
We can map chunks one by one during copying, instead of mapping
all of them together.
Signed-off-by: Yinghai <yinghai@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Thomas Renninger <trenn@suse.de>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Tang Chen <tangchen@cn.fujitsu.com>
Acked-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch fixes the issues indicated by the test results that
ipmi_msg_handler() is invoked in atomic context.
BUG: scheduling while atomic: kipmi0/18933/0x10000100
Modules linked in: ipmi_si acpi_ipmi ...
CPU: 3 PID: 18933 Comm: kipmi0 Tainted: G AW 3.10.0-rc7+ #2
Hardware name: QCI QSSC-S4R/QSSC-S4R, BIOS QSSC-S4R.QCI.01.00.0027.070120100606 07/01/2010
ffff8838245eea00 ffff88103fc63c98 ffffffff814c4a1e ffff88103fc63ca8
ffffffff814bfbab ffff88103fc63d28 ffffffff814c73e0 ffff88103933cbd4
0000000000000096 ffff88103fc63ce8 ffff88102f618000 ffff881035c01fd8
Call Trace:
<IRQ> [<ffffffff814c4a1e>] dump_stack+0x19/0x1b
[<ffffffff814bfbab>] __schedule_bug+0x46/0x54
[<ffffffff814c73e0>] __schedule+0x83/0x59c
[<ffffffff81058853>] __cond_resched+0x22/0x2d
[<ffffffff814c794b>] _cond_resched+0x14/0x1d
[<ffffffff814c6d82>] mutex_lock+0x11/0x32
[<ffffffff8101e1e9>] ? __default_send_IPI_dest_field.constprop.0+0x53/0x58
[<ffffffffa09e3f9c>] ipmi_msg_handler+0x23/0x166 [ipmi_si]
[<ffffffff812bf6e4>] deliver_response+0x55/0x5a
[<ffffffff812c0fd4>] handle_new_recv_msgs+0xb67/0xc65
[<ffffffff81007ad1>] ? read_tsc+0x9/0x19
[<ffffffff814c8620>] ? _raw_spin_lock_irq+0xa/0xc
[<ffffffffa09e1128>] ipmi_thread+0x5c/0x146 [ipmi_si]
...
Also Tony Camuso says:
We were getting occasional "Scheduling while atomic" call traces
during boot on some systems. Problem was first seen on a Cisco C210
but we were able to reproduce it on a Cisco c220m3. Setting
CONFIG_LOCKDEP and LOCKDEP_SUPPORT to 'y' exposed a lockdep around
tx_msg_lock in acpi_ipmi.c struct acpi_ipmi_device.
=================================
[ INFO: inconsistent lock state ]
2.6.32-415.el6.x86_64-debug-splck #1
---------------------------------
inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
ksoftirqd/3/17 [HC0[0]:SC1[1]:HE1:SE0] takes:
(&ipmi_device->tx_msg_lock){+.?...}, at: [<ffffffff81337a27>] ipmi_msg_handler+0x71/0x126
{SOFTIRQ-ON-W} state was registered at:
[<ffffffff810ba11c>] __lock_acquire+0x63c/0x1570
[<ffffffff810bb0f4>] lock_acquire+0xa4/0x120
[<ffffffff815581cc>] __mutex_lock_common+0x4c/0x400
[<ffffffff815586ea>] mutex_lock_nested+0x4a/0x60
[<ffffffff8133789d>] acpi_ipmi_space_handler+0x11b/0x234
[<ffffffff81321c62>] acpi_ev_address_space_dispatch+0x170/0x1be
The fix implemented by this change has been tested by Tony:
Tested the patch in a boot loop with lockdep debug enabled and never
saw the problem in over 400 reboots.
Reported-and-tested-by: Tony Camuso <tcamuso@redhat.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The SCI interrupt number is not needed for the SCI handlers, and was
just unnecessary overhead.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch introduces new macors to handle RSDP signature and cleans up the
affected codes. Lv Zheng.
Some updates are only used for ACPICA utilities which are not shipped in
the kernel yet.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch reduces code redundancy by moving the FACS/S3PT checksum
verification skip logic into acpi_tb_verify_checksum() and other
calls of this function also get benefit from this change. Lv Zheng.
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Paths command displays the full pathname and object type for
the entire namespace. Alternative to the Namespace command.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change removes some dangerous code that attempts to free the
handler context pointer in some (rare) circumstances. The owner of
the handler owns this pointer and the ACPICA code should never
touch it. Although not seen to be an issue in any kernel, it did
show up as a problem under AcpiExec. Also, set the internal storage
field for the context pointer to zero when the region is deactivated,
simply for sanity. David Box.
Signed-off-by: David E. Box <david.e.box@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This change adds support to allow hosts to install System Control
Interrupt handlers. Certain ACPI functionality requires the host
to handle raw SCIs. For example, the "SCI Doorbell" that is defined
for memory power state support requires the host device driver to
handle SCIs to examine if the doorbell has been activated. Multiple
SCI handlers can be installed to allow for future expansion.
Debugger support is included.
Lv Zheng, Bob Moore. ACPICA BZ 1032.
Bug summary:
It is reported when the PCC (Platform Communication Channel, via
MPST table, defined in ACPI specification 5.0) subchannel responds
to the host, it issues an SCI and the host must probe the subchannel
for channel status.
Buglink: http://bugs.acpica.org/show_bug.cgi?id=1032
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Perform a sanity check on the start object to prevent problems
later. ACPICA BZ 1025.
This patch only adds additional input parameter validation, no actual
kernel suffering has been discovered.
Buglink: http://bugs.acpica.org/show_bug.cgi?id=1025
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Increase the size of a couple of the debugger line buffers.
ACPICA BZ 1037.
The debugger related code is not in the kernel so the behavior of the
kernel is not affected.
Buglink: http://bugs.acpica.org/show_bug.cgi?id=1037
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Allow for longer filenames in the module name output during
trace operations.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
