2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 09:43:59 +08:00
Commit Graph

550 Commits

Author SHA1 Message Date
Andreas Rohner
b9f6614072 nilfs2: improve the performance of fdatasync()
Support for fdatasync() has been implemented in NILFS2 for a long time,
but whenever the corresponding inode is dirty the implementation falls
back to a full-flegded sync().  Since every write operation has to
update the modification time of the file, the inode will almost always
be dirty and fdatasync() will fall back to sync() most of the time.  But
this fallback is only necessary for a change of the file size and not
for a change of the various timestamps.

This patch adds a new flag NILFS_I_INODE_SYNC to differentiate between
those two situations.

 * If it is set the file size was changed and a full sync is necessary.
 * If it is not set then only the timestamps were updated and
   fdatasync() can go ahead.

There is already a similar flag I_DIRTY_DATASYNC on the VFS layer with
the exact same semantics.  Unfortunately it cannot be used directly,
because NILFS2 doesn't implement write_inode() and doesn't clear the VFS
flags when inodes are written out.  So the VFS writeback thread can
clear I_DIRTY_DATASYNC at any time without notifying NILFS2.  So
I_DIRTY_DATASYNC has to be mapped onto NILFS_I_INODE_SYNC in
nilfs_update_inode().

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:20 +02:00
Andreas Rohner
e2c7617ae3 nilfs2: add missing blkdev_issue_flush() to nilfs_sync_fs()
Under normal circumstances nilfs_sync_fs() writes out the super block,
which causes a flush of the underlying block device.  But this depends
on the THE_NILFS_SB_DIRTY flag, which is only set if the pointer to the
last segment crosses a segment boundary.  So if only a small amount of
data is written before the call to nilfs_sync_fs(), no flush of the
block device occurs.

In the above case an additional call to blkdev_issue_flush() is needed.
To prevent unnecessary overhead, the new flag nilfs->ns_flushed_device
is introduced, which is cleared whenever new logs are written and set
whenever the block device is flushed.  For convenience the function
nilfs_flush_device() is added, which contains the above logic.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14 02:18:20 +02:00
Andreas Rohner
56d7acc792 nilfs2: fix data loss with mmap()
This bug leads to reproducible silent data loss, despite the use of
msync(), sync() and a clean unmount of the file system.  It is easily
reproducible with the following script:

  ----------------[BEGIN SCRIPT]--------------------
  mkfs.nilfs2 -f /dev/sdb
  mount /dev/sdb /mnt

  dd if=/dev/zero bs=1M count=30 of=/mnt/testfile

  umount /mnt
  mount /dev/sdb /mnt
  CHECKSUM_BEFORE="$(md5sum /mnt/testfile)"

  /root/mmaptest/mmaptest /mnt/testfile 30 10 5

  sync
  CHECKSUM_AFTER="$(md5sum /mnt/testfile)"
  umount /mnt
  mount /dev/sdb /mnt
  CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)"
  umount /mnt

  echo "BEFORE MMAP:\t$CHECKSUM_BEFORE"
  echo "AFTER MMAP:\t$CHECKSUM_AFTER"
  echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT"
  ----------------[END SCRIPT]--------------------

The mmaptest tool looks something like this (very simplified, with
error checking removed):

  ----------------[BEGIN mmaptest]--------------------
  data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE,
              MAP_SHARED, fd, file_offset);

  for (i = 0; i < write_count; ++i) {
        memcpy(data + i * 4096, buf, sizeof(buf));
        msync(data, file_size - file_offset, MS_SYNC))
  }
  ----------------[END mmaptest]--------------------

The output of the script looks something like this:

  BEFORE MMAP:    281ed1d5ae50e8419f9b978aab16de83  /mnt/testfile
  AFTER MMAP:     6604a1c31f10780331a6850371b3a313  /mnt/testfile
  AFTER REMOUNT:  281ed1d5ae50e8419f9b978aab16de83  /mnt/testfile

So it is clear, that the changes done using mmap() do not survive a
remount.  This can be reproduced a 100% of the time.  The problem was
introduced in commit 136e8770cd ("nilfs2: fix issue of
nilfs_set_page_dirty() for page at EOF boundary").

If the page was read with mpage_readpage() or mpage_readpages() for
example, then it has no buffers attached to it.  In that case
page_has_buffers(page) in nilfs_set_page_dirty() will be false.
Therefore nilfs_set_file_dirty() is never called and the pages are never
collected and never written to disk.

This patch fixes the problem by also calling nilfs_set_file_dirty() if the
page has no buffers attached to it.

[akpm@linux-foundation.org: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Tested-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-26 08:10:34 -07:00
Linus Torvalds
f6f993328b Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "Stuff in here:

   - acct.c fixes and general rework of mnt_pin mechanism.  That allows
     to go for delayed-mntput stuff, which will permit mntput() on deep
     stack without worrying about stack overflows - fs shutdown will
     happen on shallow stack.  IOW, we can do Eric's umount-on-rmdir
     series without introducing tons of stack overflows on new mntput()
     call chains it introduces.
   - Bruce's d_splice_alias() patches
   - more Miklos' rename() stuff.
   - a couple of regression fixes (stable fodder, in the end of branch)
     and a fix for API idiocy in iov_iter.c.

  There definitely will be another pile, maybe even two.  I'd like to
  get Eric's series in this time, but even if we miss it, it'll go right
  in the beginning of for-next in the next cycle - the tricky part of
  prereqs is in this pile"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (40 commits)
  fix copy_tree() regression
  __generic_file_write_iter(): fix handling of sync error after DIO
  switch iov_iter_get_pages() to passing maximal number of pages
  fs: mark __d_obtain_alias static
  dcache: d_splice_alias should detect loops
  exportfs: update Exporting documentation
  dcache: d_find_alias needn't recheck IS_ROOT && DCACHE_DISCONNECTED
  dcache: remove unused d_find_alias parameter
  dcache: d_obtain_alias callers don't all want DISCONNECTED
  dcache: d_splice_alias should ignore DCACHE_DISCONNECTED
  dcache: d_splice_alias mustn't create directory aliases
  dcache: close d_move race in d_splice_alias
  dcache: move d_splice_alias
  namei: trivial fix to vfs_rename_dir comment
  VFS: allow ->d_manage() to declare -EISDIR in rcu_walk mode.
  cifs: support RENAME_NOREPLACE
  hostfs: support rename flags
  shmem: support RENAME_EXCHANGE
  shmem: support RENAME_NOREPLACE
  btrfs: add RENAME_NOREPLACE
  ...
2014-08-11 11:44:11 -07:00
Vyacheslav Dubeyko
dd70edbde2 nilfs2: integrate sysfs support into driver
This patch integrates creation of sysfs groups and
attributes into NILFS file system driver.

It was found the issue with nilfs_sysfs_{create/delete}_snapshot_group
functions by Michael L Semon <mlsemon35@gmail.com> in the first
version of the patch:

  BUG: sleeping function called from invalid context at kernel/locking/mutex.c:579
  in_atomic(): 1, irqs_disabled(): 0, pid: 32676, name: umount.nilfs2
  2 locks held by umount.nilfs2/32676:
   #0:  (&type->s_umount_key#21){++++..}, at: [<790c18e2>] deactivate_super+0x37/0x58
   #1:  (&(&nilfs->ns_cptree_lock)->rlock){+.+...}, at: [<791bf659>] nilfs_put_root+0x23/0x5a
  Preemption disabled at:[<791bf659>] nilfs_put_root+0x23/0x5a

  CPU: 0 PID: 32676 Comm: umount.nilfs2 Not tainted 3.14.0+ #2
  Hardware name: Dell Computer Corporation Dimension 2350/07W080, BIOS A01 12/17/2002
  Call Trace:
    dump_stack+0x4b/0x75
    __might_sleep+0x111/0x16f
    mutex_lock_nested+0x1e/0x3ad
    kernfs_remove+0x12/0x26
    sysfs_remove_dir+0x3d/0x62
    kobject_del+0x13/0x38
    nilfs_sysfs_delete_snapshot_group+0xb/0xd
    nilfs_put_root+0x2a/0x5a
    nilfs_detach_log_writer+0x1ab/0x2c1
    nilfs_put_super+0x13/0x68
    generic_shutdown_super+0x60/0xd1
    kill_block_super+0x1d/0x60
    deactivate_locked_super+0x22/0x3f
    deactivate_super+0x3e/0x58
    mntput_no_expire+0xe2/0x141
    SyS_oldumount+0x70/0xa5
    syscall_call+0x7/0xb

The reason of the issue was placement of
nilfs_sysfs_{create/delete}_snapshot_group() call under
nilfs->ns_cptree_lock protection.  But this protection is unnecessary and
wrong solution.  The second version of the patch fixes this issue.

[fengguang.wu@intel.com: nilfs_sysfs_create_mounted_snapshots_group can be static]
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:21 -07:00
Vyacheslav Dubeyko
a5a7332a29 nilfs2: add /sys/fs/nilfs2/<device>/mounted_snapshots/<snapshot> group
This patch adds creation of <snapshot> group for every mounted
snapshot in /sys/fs/nilfs2/<device>/mounted_snapshots group.

The group contains details about mounted snapshot:
(1) inodes_count - show number of inodes for snapshot.
(2) blocks_count - show number of blocks for snapshot.

Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:21 -07:00
Vyacheslav Dubeyko
a2ecb791a9 nilfs2: add /sys/fs/nilfs2/<device>/mounted_snapshots group
This patch adds creation of /sys/fs/nilfs2/<device>/mounted_snapshots
group.

The mounted_snapshots group contains group for every
mounted snapshot.

Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:21 -07:00
Vyacheslav Dubeyko
02a0ba1c60 nilfs2: add /sys/fs/nilfs2/<device>/checkpoints group
This patch adds creation of /sys/fs/nilfs2/<device>/checkpoints
group.

The checkpoints group contains attributes that describe
details about volume's checkpoints:
(1) checkpoints_number - show number of checkpoints on volume.
(2) snapshots_number - show number of snapshots on volume.
(3) last_seg_checkpoint - show checkpoint number of the latest segment.
(4) next_checkpoint - show next checkpoint number.

Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:21 -07:00
Vyacheslav Dubeyko
ef43d5cd84 nilfs2: add /sys/fs/nilfs2/<device>/segments group
This patch adds creation of /sys/fs/nilfs2/<device>/segments
group.

The segments group contains attributes that describe
details about volume's segments:
(1) segments_number - show number of segments on volume.
(2) blocks_per_segment - show number of blocks in segment.
(3) clean_segments - show count of clean segments.
(4) dirty_segments - show count of dirty segments.

Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:20 -07:00
Vyacheslav Dubeyko
abc968dbf2 nilfs2: add /sys/fs/nilfs2/<device>/segctor group
This patch adds creation of /sys/fs/nilfs2/<device>/segctor
group.

The segctor group contains attributes that describe
segctor thread activity details:
(1) last_pseg_block - show start block number of the latest segment.
(2) last_seg_sequence - show sequence value of the latest segment.
(3) last_seg_checkpoint - show checkpoint number of the latest segment.
(4) current_seg_sequence - show segment sequence counter.
(5) current_last_full_seg - show index number of the latest full segment.
(6) next_full_seg - show index number of the full segment index
to be used next.
(7) next_pseg_offset - show offset of next partial segment in
the current full segment.
(8) next_checkpoint - show next checkpoint number.
(9) last_seg_write_time - show write time of the last segment
in human-readable format.
(10) last_seg_write_time_secs - show write time of the last segment
in seconds.
(11) last_nongc_write_time - show write time of the last segment
not for cleaner operation in human-readable format.
(12) last_nongc_write_time_secs - show write time of the last segment
not for cleaner operation in seconds.
(13) dirty_data_blocks_count - show number of dirty data blocks.

Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:20 -07:00
Vyacheslav Dubeyko
caa05d49df nilfs2: add /sys/fs/nilfs2/<device>/superblock group
This patch adds creation of /sys/fs/nilfs2/<device>/superblock
group.

The superblock group contains attributes that describe
superblock's details:
(1) sb_write_time - show previous write time of super block in
human-readable format.
(2) sb_write_time_secs - show previous write time of super block
in seconds.
(3) sb_write_count - show write count of super block.
(4) sb_update_frequency - show/set interval of periodical update
of superblock (in seconds). You can set preferable frequency of
superblock update by command:

echo <value> > /sys/fs/nilfs2/<device>/superblock/sb_update_frequency

Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:20 -07:00
Vyacheslav Dubeyko
da7141fb78 nilfs2: add /sys/fs/nilfs2/<device> group
This patch adds creation of /sys/fs/nilfs2/<device> group.

The <device> group contains attributes that describe file
system partition's details:
(1) revision - show NILFS file system revision.
(2) blocksize - show volume block size in bytes.
(3) device_size - show volume size in bytes.
(4) free_blocks - show count of free blocks on volume.
(5) uuid - show volume's UUID.
(6) volume_name - show volume's name.

Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:20 -07:00
Vyacheslav Dubeyko
aebe17f684 nilfs2: add /sys/fs/nilfs2/features group
This patchset implements creation of sysfs groups and attributes with
the purpose to show NILFS2 volume details, internal state of the driver
and to manage internal state of NILFS2 driver.

Sysfs is a virtual file system that exports information about devices
and drivers from the kernel device model to user space, and is also used
for configuration.  NILFS2 is a complex file system that has segctor
thread, GC thread, checkpoint/snapshot model and so on.  Sysfs namespace
provides native and easy way for: (1) getting info and statistics about
volume state; (2) getting info and configuration of internal subsystems
(segctor thread); (3) snapshots management.

Suggested patchset provides basis for managing segctor thread behaviour
and manipulation by snapshots.  Currently, it informs only about segctor
thread's internal parameters and about mounted snapshots.  But sysfs
interface can provide easy and simple way for deep management of segctor
thread and snapshots.

This patchset provides opportunity to manage interval of periodical
update of superblock (in seconds).  Default value is 10 seconds.  Now a
user can increase this value by means of
nilfs2/<device>/superblock/sb_update_frequency attribute in the case of
necessity.

Also the patchset provides opportunity to get information easily about
key volumes's parameters (free blocks, superblock write count,
superblock update frequency, latest segment info, dirty data blocks
count, count of clean segments, count of dirty segments and so on) in
real time manner.  Such information can be used in scripts for subtle
management of filesystem.

Implemented functionality creates such groups:
(1) /sys/fs/nilfs2 - root group
(2) /sys/fs/nilfs2/features - group contains attributes that describe NILFS
file system driver features
(3) /sys/fs/nilfs2/<device> - group contains attributes that describe file
system partition's details
(4) /sys/fs/nilfs2/<device>/superblock - group contains attributes that describe
superblock's details
(5) /sys/fs/nilfs2/<device>/segctor - group contains attributes that describe
segctor thread activity details
(6) /sys/fs/nilfs2/<device>/segments - group contains attributes that describe
details about volume's segments
(7) /sys/fs/nilfs2/<device>/checkpoints - group contains attributes that describe
details about volume's checkpoints
(8) /sys/fs/nilfs2/<device>/mounted_snapshots - group contains group for every
mounted snapshot
(9) /sys/fs/nilfs2/<device>/mounted_snapshots/<snapshot> - group contains
details about mounted snapshot

This patch (of 9):

This patch adds code of creation /sys/fs/nilfs2 group and
/sys/fs/nilfs2/features group.

The features group contains attributes that describe NILFS
file system driver features:
(1) revision - show current revision of NILFS file system driver.

There are two formats of timestamp output - seconds and human-readable
format.  Every showed timestamp has two sysfs files (time-<xxx> and
time-<xxx>-secs).  One sysfs file (time-<xxx>) shows time in
human-readable format.  Another sysfs file (time-<xxx>-secs) shows time in
seconds.

It was reported by Michael Semon that timestamp output in human-readable
format should be changed from "2014-4-12 14:5:38" to "2014-04-12
14:05:38".  Second version of the patch fixes this issue.

Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <Vyacheslav.Dubeyko@hgst.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08 15:57:20 -07:00
J. Bruce Fields
1a0a397e41 dcache: d_obtain_alias callers don't all want DISCONNECTED
There are a few d_obtain_alias callers that are using it to get the
root of a filesystem which may already have an alias somewhere else.

This is not the same as the filehandle-lookup case, and none of them
actually need DCACHE_DISCONNECTED set.

It isn't really a serious problem, but it would really be clearer if we
reserved DCACHE_DISCONNECTED for those cases where it's actually needed.

In the btrfs case this was causing a spurious printk from
nfsd/nfsfh.c:fh_verify when it found an unexpected DCACHE_DISCONNECTED
dentry.  Josef worked around this by unsetting DCACHE_DISCONNECTED
manually in 3a0dfa6a12 "Btrfs: unset DCACHE_DISCONNECTED when mounting
default subvol", and this replaces that workaround.

Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-08-07 14:40:10 -04:00
Al Viro
8174202b34 write_iter variants of {__,}generic_file_aio_write()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:38:00 -04:00
Al Viro
aad4f8bb42 switch simple generic_file_aio_read() users to ->read_iter()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:37:55 -04:00
Al Viro
31b140398c switch {__,}blockdev_direct_IO() to iov_iter
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:46 -04:00
Al Viro
a6cbcd4a4a get rid of pointless iov_length() in ->direct_IO()
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:45 -04:00
Al Viro
d8d3d94b80 pass iov_iter to ->direct_IO()
unmodified, for now

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-05-06 17:32:44 -04:00
Kirill A. Shutemov
f1820361f8 mm: implement ->map_pages for page cache
filemap_map_pages() is generic implementation of ->map_pages() for
filesystems who uses page cache.

It should be safe to use filemap_map_pages() for ->map_pages() if
filesystem use filemap_fault() for ->fault().

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ning Qu <quning@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:35:53 -07:00
Linus Torvalds
24e7ea3bea Major changes for 3.14 include support for the newly added ZERO_RANGE
and COLLAPSE_RANGE fallocate operations, and scalability improvements
 in the jbd2 layer and in xattr handling when the extended attributes
 spill over into an external block.
 
 Other than that, the usual clean ups and minor bug fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTPbD2AAoJENNvdpvBGATwDmUQANSfGYIQazB8XKKgtNTMiG/Y
 Ky7n1JzN9lTX/6nMsqQnbfCweLRmxqpWUBuyKDRHUi8IG0/voXSTFsAOOgz0R15A
 ERRRWkVvHixLpohuL/iBdEMFHwNZYPGr3jkm0EIgzhtXNgk5DNmiuMwvHmCY27kI
 kdNZIw9fip/WRNoFLDBGnLGC37aanoHhCIbVlySy5o9LN1pkC8BgXAYV0Rk19SVd
 bWCudSJEirFEqWS5H8vsBAEm/ioxTjwnNL8tX8qms6orZ6h8yMLFkHoIGWPw3Q15
 a0TSUoMyav50Yr59QaDeWx9uaPQVeK41wiYFI2rZOnyG2ts0u0YXs/nLwJqTovgs
 rzvbdl6cd3Nj++rPi97MTA7iXK96WQPjsDJoeeEgnB0d/qPyTk6mLKgftzLTNgSa
 ZmWjrB19kr6CMbebMC4L6eqJ8Fr66pCT8c/iue8wc4MUHi7FwHKH64fqWvzp2YT/
 +165dqqo2JnUv7tIp6sUi1geun+bmDHLZFXgFa7fNYFtcU3I+uY1mRr3eMVAJndA
 2d6ASe/KhQbpVnjKJdQ8/b833ZS3p+zkgVPrd68bBr3t7gUmX91wk+p1ct6rUPLr
 700F+q/pQWL8ap0pU9Ht/h3gEJIfmRzTwxlOeYyOwDseqKuS87PSB3BzV3dDunSU
 DrPKlXwIgva7zq5/S0Vr
 =4s1Z
 -----END PGP SIGNATURE-----

Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Major changes for 3.14 include support for the newly added ZERO_RANGE
  and COLLAPSE_RANGE fallocate operations, and scalability improvements
  in the jbd2 layer and in xattr handling when the extended attributes
  spill over into an external block.

  Other than that, the usual clean ups and minor bug fixes"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (42 commits)
  ext4: fix premature freeing of partial clusters split across leaf blocks
  ext4: remove unneeded test of ret variable
  ext4: fix comment typo
  ext4: make ext4_block_zero_page_range static
  ext4: atomically set inode->i_flags in ext4_set_inode_flags()
  ext4: optimize Hurd tests when reading/writing inodes
  ext4: kill i_version support for Hurd-castrated file systems
  ext4: each filesystem creates and uses its own mb_cache
  fs/mbcache.c: doucple the locking of local from global data
  fs/mbcache.c: change block and index hash chain to hlist_bl_node
  ext4: Introduce FALLOC_FL_ZERO_RANGE flag for fallocate
  ext4: refactor ext4_fallocate code
  ext4: Update inode i_size after the preallocation
  ext4: fix partial cluster handling for bigalloc file systems
  ext4: delete path dealloc code in ext4_ext_handle_uninitialized_extents
  ext4: only call sync_filesystm() when remounting read-only
  fs: push sync_filesystem() down to the file system's remount_fs()
  jbd2: improve error messages for inconsistent journal heads
  jbd2: minimize region locked by j_list_lock in jbd2_journal_forget()
  jbd2: minimize region locked by j_list_lock in journal_get_create_access()
  ...
2014-04-04 15:39:39 -07:00
Ryusuke Konishi
0ec060d188 nilfs2: verify metadata sizes read from disk
Add code to check sizes of on-disk data of metadata files such as inode
size, segment usage size, DAT entry size, and checkpoint size.  Although
these sizes are read from disk, the current implementation doesn't check
them.

If these sizes are not sane on disk, it can cause out-of-range access to
metadata or memory access overrun on metadata block buffers due to
overflow in sundry calculations.

Both lower limit and upper limit of metadata sizes are verified to
prevent these issues.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Andreas Rohner
f9f32c44e7 nilfs2: add FITRIM ioctl support for nilfs2
Add support for the FITRIM ioctl, which enables user space tools to
issue TRIM/DISCARD requests to the underlying device.  Every clean
segment within the specified range will be discarded.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:26 -07:00
Andreas Rohner
82e11e857b nilfs2: add nilfs_sufile_trim_fs to trim clean segs
Add nilfs_sufile_trim_fs(), which takes an fstrim_range structure and
calls blkdev_issue_discard for every clean segment in the specified
range.  The range is truncated to file system block boundaries.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Andreas Rohner
2cc88f3a5f nilfs2: implementation of NILFS_IOCTL_SET_SUINFO ioctl
With this ioctl the segment usage entries in the SUFILE can be updated
from userspace.

This is useful, because it allows the userspace GC to modify and update
segment usage entries for specific segments, which enables it to avoid
unnecessary write operations.

If a segment needs to be cleaned, but there is no or very little
reclaimable space in it, the cleaning operation basically degrades to a
useless moving operation.  In the end the only thing that changes is the
location of the data and a timestamp in the segment usage information.
With this ioctl the GC can skip the cleaning and update the segment
usage entries directly instead.

This is basically a shortcut to cleaning the segment.  It is still
necessary to read the segment summary information, but the writing of
the live blocks can be skipped if it's not worth it.

[konishi.ryusuke@lab.ntt.co.jp: add description of NILFS_IOCTL_SET_SUINFO ioctl]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Andreas Rohner
00e9ffcd27 nilfs2: add nilfs_sufile_set_suinfo to update segment usage
Introduce nilfs_sufile_set_suinfo(), which expects an array of
nilfs_suinfo_update structures and updates the segment usage information
accordingly.

This is basically a helper function for the newly introduced
NILFS_IOCTL_SET_SUINFO ioctl.

[konishi.ryusuke@lab.ntt.co.jp: use put_bh() instead of brelse() because we know bh != NULL]
Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:25 -07:00
Johannes Weiner
91b0abe36a mm + fs: store shadow entries in page cache
Reclaim will be leaving shadow entries in the page cache radix tree upon
evicting the real page.  As those pages are found from the LRU, an
iput() can lead to the inode being freed concurrently.  At this point,
reclaim must no longer install shadow pages because the inode freeing
code needs to ensure the page tree is really empty.

Add an address_space flag, AS_EXITING, that the inode freeing code sets
under the tree lock before doing the final truncate.  Reclaim will check
for this flag before installing shadow pages.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Bob Liu <bob.liu@oracle.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Luigi Semenzato <semenzato@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Metin Doslu <metin@citusdata.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Ozgun Erdogan <ozgun@citusdata.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:01 -07:00
Theodore Ts'o
02b9984d64 fs: push sync_filesystem() down to the file system's remount_fs()
Previously, the no-op "mount -o mount /dev/xxx" operation when the
file system is already mounted read-write causes an implied,
unconditional syncfs().  This seems pretty stupid, and it's certainly
documented or guaraunteed to do this, nor is it particularly useful,
except in the case where the file system was mounted rw and is getting
remounted read-only.

However, it's possible that there might be some file systems that are
actually depending on this behavior.  In most file systems, it's
probably fine to only call sync_filesystem() when transitioning from
read-write to read-only, and there are some file systems where this is
not needed at all (for example, for a pseudo-filesystem or something
like romfs).

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Artem Bityutskiy <dedekind1@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Jan Kara <jack@suse.cz>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Anders Larsen <al@alarsen.net>
Cc: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: xfs@oss.sgi.com
Cc: linux-btrfs@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: codalist@coda.cs.cmu.edu
Cc: linux-ext4@vger.kernel.org
Cc: linux-f2fs-devel@lists.sourceforge.net
Cc: fuse-devel@lists.sourceforge.net
Cc: cluster-devel@redhat.com
Cc: linux-mtd@lists.infradead.org
Cc: jfs-discussion@lists.sourceforge.net
Cc: linux-nfs@vger.kernel.org
Cc: linux-nilfs@vger.kernel.org
Cc: linux-ntfs-dev@lists.sourceforge.net
Cc: ocfs2-devel@oss.oracle.com
Cc: reiserfs-devel@vger.kernel.org
2014-03-13 10:14:33 -04:00
Linus Torvalds
f568849eda Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-block
Pull core block IO changes from Jens Axboe:
 "The major piece in here is the immutable bio_ve series from Kent, the
  rest is fairly minor.  It was supposed to go in last round, but
  various issues pushed it to this release instead.  The pull request
  contains:

   - Various smaller blk-mq fixes from different folks.  Nothing major
     here, just minor fixes and cleanups.

   - Fix for a memory leak in the error path in the block ioctl code
     from Christian Engelmayer.

   - Header export fix from CaiZhiyong.

   - Finally the immutable biovec changes from Kent Overstreet.  This
     enables some nice future work on making arbitrarily sized bios
     possible, and splitting more efficient.  Related fixes to immutable
     bio_vecs:

        - dm-cache immutable fixup from Mike Snitzer.
        - btrfs immutable fixup from Muthu Kumar.

  - bio-integrity fix from Nic Bellinger, which is also going to stable"

* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
  xtensa: fixup simdisk driver to work with immutable bio_vecs
  block/blk-mq-cpu.c: use hotcpu_notifier()
  blk-mq: for_each_* macro correctness
  block: Fix memory leak in rw_copy_check_uvector() handling
  bio-integrity: Fix bio_integrity_verify segment start bug
  block: remove unrelated header files and export symbol
  blk-mq: uses page->list incorrectly
  blk-mq: use __smp_call_function_single directly
  btrfs: fix missing increment of bi_remaining
  Revert "block: Warn and free bio if bi_end_io is not set"
  block: Warn and free bio if bi_end_io is not set
  blk-mq: fix initializing request's start time
  block: blk-mq: don't export blk_mq_free_queue()
  block: blk-mq: make blk_sync_queue support mq
  block: blk-mq: support draining mq queue
  dm cache: increment bi_remaining when bi_end_io is restored
  block: fixup for generic bio chaining
  block: Really silence spurious compiler warnings
  block: Silence spurious compiler warnings
  block: Kill bio_pair_split()
  ...
2014-01-30 11:19:05 -08:00
Vyacheslav Dubeyko
d623a9420c nilfs2: add comments for ioctls
Add comments for ioctls in fs/nilfs2/ioctl.c file and describe NILFS2
specific ioctls in Documentation/filesystems/nilfs2.txt.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Wenliang Fan <fanwlexca@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:37:00 -08:00
Wenliang Fan
4b15d61718 fs/nilfs2: fix integer overflow in nilfs_ioctl_wrap_copy()
The local variable 'pos' in nilfs_ioctl_wrap_copy function can overflow if
a large number was passed to argv->v_index from userspace and the sum of
argv->v_index and argv->v_nmembs exceeds the maximum value of __u64 type
integer (= ~(__u64)0 = 18446744073709551615).

Here, argv->v_index is a 64-bit width argument to specify the start
position of target data items (such as segment number, checkpoint number,
or virtual block address of nilfs), and argv->v_nmembs gives the total
number of the items that userland programs (such as lssu, lscp, or
cleanerd) want to get information about, which also gives the maximum
element count of argv->v_base[] array.

nilfs_ioctl_wrap_copy() calls dofunc() repeatedly and increments the
position variable 'pos' at the end of each iteration if dofunc() itself
didn't update 'pos':

      if (pos == ppos)
              pos += n;

This patch prevents the overflow here by rejecting pairs of a start
position (argv->v_index) and a total count (argv->v_nmembs) which leads to
the overflow.

[konishi.ryusuke@lab.ntt.co.jp: fix signedness issue]
Signed-off-by: Wenliang Fan <fanwlexca@gmail.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:37:00 -08:00
Andreas Rohner
70f2fe3a26 nilfs2: fix segctor bug that causes file system corruption
There is a bug in the function nilfs_segctor_collect, which results in
active data being written to a segment, that is marked as clean.  It is
possible, that this segment is selected for a later segment
construction, whereby the old data is overwritten.

The problem shows itself with the following kernel log message:

  nilfs_sufile_do_cancel_free: segment 6533 must be clean

Usually a few hours later the file system gets corrupted:

  NILFS: bad btree node (blocknr=8748107): level = 0, flags = 0x0, nchildren = 0
  NILFS error (device sdc1): nilfs_bmap_last_key: broken bmap (inode number=114660)

The issue can be reproduced with a file system that is nearly full and
with the cleaner running, while some IO intensive task is running.
Although it is quite hard to reproduce.

This is what happens:

 1. The cleaner starts the segment construction
 2. nilfs_segctor_collect is called
 3. sc_stage is on NILFS_ST_SUFILE and segments are freed
 4. sc_stage is on NILFS_ST_DAT current segment is full
 5. nilfs_segctor_extend_segments is called, which
    allocates a new segment
 6. The new segment is one of the segments freed in step 3
 7. nilfs_sufile_cancel_freev is called and produces an error message
 8. Loop around and the collection starts again
 9. sc_stage is on NILFS_ST_SUFILE and segments are freed
    including the newly allocated segment, which will contain active
    data and can be allocated at a later time
10. A few hours later another segment construction allocates the
    segment and causes file system corruption

This can be prevented by simply reordering the statements.  If
nilfs_sufile_cancel_freev is called before nilfs_segctor_extend_segments
the freed segments are marked as dirty and cannot be allocated any more.

Signed-off-by: Andreas Rohner <andreas.rohner@gmx.net>
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Andreas Rohner <andreas.rohner@gmx.net>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-15 14:19:42 +07:00
Kent Overstreet
4f024f3797 block: Abstract out bvec iterator
Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.

Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6
2013-11-23 22:33:47 -08:00
Vyacheslav Dubeyko
7f42ec3941 nilfs2: fix issue with race condition of competition between segments for dirty blocks
Many NILFS2 users were reported about strange file system corruption
(for example):

   NILFS: bad btree node (blocknr=185027): level = 0, flags = 0x0, nchildren = 768
   NILFS error (device sda4): nilfs_bmap_last_key: broken bmap (inode number=11540)

But such error messages are consequence of file system's issue that takes
place more earlier.  Fortunately, Jerome Poulin <jeromepoulin@gmail.com>
and Anton Eliasson <devel@antoneliasson.se> were reported about another
issue not so recently.  These reports describe the issue with segctor
thread's crash:

  BUG: unable to handle kernel paging request at 0000000000004c83
  IP: nilfs_end_page_io+0x12/0xd0 [nilfs2]

  Call Trace:
   nilfs_segctor_do_construct+0xf25/0x1b20 [nilfs2]
   nilfs_segctor_construct+0x17b/0x290 [nilfs2]
   nilfs_segctor_thread+0x122/0x3b0 [nilfs2]
   kthread+0xc0/0xd0
   ret_from_fork+0x7c/0xb0

These two issues have one reason.  This reason can raise third issue
too.  Third issue results in hanging of segctor thread with eating of
100% CPU.

REPRODUCING PATH:

One of the possible way or the issue reproducing was described by
Jermoe me Poulin <jeromepoulin@gmail.com>:

1. init S to get to single user mode.
2. sysrq+E to make sure only my shell is running
3. start network-manager to get my wifi connection up
4. login as root and launch "screen"
5. cd /boot/log/nilfs which is a ext3 mount point and can log when NILFS dies.
6. lscp | xz -9e > lscp.txt.xz
7. mount my snapshot using mount -o cp=3360839,ro /dev/vgUbuntu/root /mnt/nilfs
8. start a screen to dump /proc/kmsg to text file since rsyslog is killed
9. start a screen and launch strace -f -o find-cat.log -t find
/mnt/nilfs -type f -exec cat {} > /dev/null \;
10. start a screen and launch strace -f -o apt-get.log -t apt-get update
11. launch the last command again as it did not crash the first time
12. apt-get crashes
13. ps aux > ps-aux-crashed.log
13. sysrq+W
14. sysrq+E  wait for everything to terminate
15. sysrq+SUSB

Simplified way of the issue reproducing is starting kernel compilation
task and "apt-get update" in parallel.

REPRODUCIBILITY:

The issue is reproduced not stable [60% - 80%].  It is very important to
have proper environment for the issue reproducing.  The critical
conditions for successful reproducing:

(1) It should have big modified file by mmap() way.

(2) This file should have the count of dirty blocks are greater that
    several segments in size (for example, two or three) from time to time
    during processing.

(3) It should be intensive background activity of files modification
    in another thread.

INVESTIGATION:

First of all, it is possible to see that the reason of crash is not valid
page address:

  NILFS [nilfs_segctor_complete_write]:2100 bh->b_count 0, bh->b_blocknr 13895680, bh->b_size 13897727, bh->b_page 0000000000001a82
  NILFS [nilfs_segctor_complete_write]:2101 segbuf->sb_segnum 6783

Moreover, value of b_page (0x1a82) is 6786.  This value looks like segment
number.  And b_blocknr with b_size values look like block numbers.  So,
buffer_head's pointer points on not proper address value.

Detailed investigation of the issue is discovered such picture:

  [-----------------------------SEGMENT 6783-------------------------------]
  NILFS [nilfs_segctor_do_construct]:2310 nilfs_segctor_begin_construction
  NILFS [nilfs_segctor_do_construct]:2321 nilfs_segctor_collect
  NILFS [nilfs_segctor_do_construct]:2336 nilfs_segctor_assign
  NILFS [nilfs_segctor_do_construct]:2367 nilfs_segctor_update_segusage
  NILFS [nilfs_segctor_do_construct]:2371 nilfs_segctor_prepare_write
  NILFS [nilfs_segctor_do_construct]:2376 nilfs_add_checksums_on_logs
  NILFS [nilfs_segctor_do_construct]:2381 nilfs_segctor_write
  NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111149024, segbuf->sb_segnum 6783

  [-----------------------------SEGMENT 6784-------------------------------]
  NILFS [nilfs_segctor_do_construct]:2310 nilfs_segctor_begin_construction
  NILFS [nilfs_segctor_do_construct]:2321 nilfs_segctor_collect
  NILFS [nilfs_lookup_dirty_data_buffers]:782 bh->b_count 1, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824
  NILFS [nilfs_lookup_dirty_data_buffers]:783 bh->b_assoc_buffers.next ffff8802174a6798, bh->b_assoc_buffers.prev ffff880221cffee8
  NILFS [nilfs_segctor_do_construct]:2336 nilfs_segctor_assign
  NILFS [nilfs_segctor_do_construct]:2367 nilfs_segctor_update_segusage
  NILFS [nilfs_segctor_do_construct]:2371 nilfs_segctor_prepare_write
  NILFS [nilfs_segctor_do_construct]:2376 nilfs_add_checksums_on_logs
  NILFS [nilfs_segctor_do_construct]:2381 nilfs_segctor_write
  NILFS [nilfs_segbuf_submit_bh]:575 bh->b_count 1, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824
  NILFS [nilfs_segbuf_submit_bh]:576 segbuf->sb_segnum 6784
  NILFS [nilfs_segbuf_submit_bh]:577 bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880218bcdf50
  NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111150080, segbuf->sb_segnum 6784, segbuf->sb_nbio 0
  [----------] ditto
  NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111164416, segbuf->sb_segnum 6784, segbuf->sb_nbio 15

  [-----------------------------SEGMENT 6785-------------------------------]
  NILFS [nilfs_segctor_do_construct]:2310 nilfs_segctor_begin_construction
  NILFS [nilfs_segctor_do_construct]:2321 nilfs_segctor_collect
  NILFS [nilfs_lookup_dirty_data_buffers]:782 bh->b_count 2, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824
  NILFS [nilfs_lookup_dirty_data_buffers]:783 bh->b_assoc_buffers.next ffff880219277e80, bh->b_assoc_buffers.prev ffff880221cffc88
  NILFS [nilfs_segctor_do_construct]:2367 nilfs_segctor_update_segusage
  NILFS [nilfs_segctor_do_construct]:2371 nilfs_segctor_prepare_write
  NILFS [nilfs_segctor_do_construct]:2376 nilfs_add_checksums_on_logs
  NILFS [nilfs_segctor_do_construct]:2381 nilfs_segctor_write
  NILFS [nilfs_segbuf_submit_bh]:575 bh->b_count 2, bh->b_page ffffea000709b000, page->index 0, i_ino 1033103, i_size 25165824
  NILFS [nilfs_segbuf_submit_bh]:576 segbuf->sb_segnum 6785
  NILFS [nilfs_segbuf_submit_bh]:577 bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880222cc7ee8
  NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111165440, segbuf->sb_segnum 6785, segbuf->sb_nbio 0
  [----------] ditto
  NILFS [nilfs_segbuf_submit_bio]:464 bio->bi_sector 111177728, segbuf->sb_segnum 6785, segbuf->sb_nbio 12

  NILFS [nilfs_segctor_do_construct]:2399 nilfs_segctor_wait
  NILFS [nilfs_segbuf_wait]:676 segbuf->sb_segnum 6783
  NILFS [nilfs_segbuf_wait]:676 segbuf->sb_segnum 6784
  NILFS [nilfs_segbuf_wait]:676 segbuf->sb_segnum 6785

  NILFS [nilfs_segctor_complete_write]:2100 bh->b_count 0, bh->b_blocknr 13895680, bh->b_size 13897727, bh->b_page 0000000000001a82

  BUG: unable to handle kernel paging request at 0000000000001a82
  IP: [<ffffffffa024d0f2>] nilfs_end_page_io+0x12/0xd0 [nilfs2]

Usually, for every segment we collect dirty files in list.  Then, dirty
blocks are gathered for every dirty file, prepared for write and
submitted by means of nilfs_segbuf_submit_bh() call.  Finally, it takes
place complete write phase after calling nilfs_end_bio_write() on the
block layer.  Buffers/pages are marked as not dirty on final phase and
processed files removed from the list of dirty files.

It is possible to see that we had three prepare_write and submit_bio
phases before segbuf_wait and complete_write phase.  Moreover, segments
compete between each other for dirty blocks because on every iteration
of segments processing dirty buffer_heads are added in several lists of
payload_buffers:

  [SEGMENT 6784]: bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880218bcdf50
  [SEGMENT 6785]: bh->b_assoc_buffers.next ffff880218a0d5f8, bh->b_assoc_buffers.prev ffff880222cc7ee8

The next pointer is the same but prev pointer has changed.  It means
that buffer_head has next pointer from one list but prev pointer from
another.  Such modification can be made several times.  And, finally, it
can be resulted in various issues: (1) segctor hanging, (2) segctor
crashing, (3) file system metadata corruption.

FIX:
This patch adds:

(1) setting of BH_Async_Write flag in nilfs_segctor_prepare_write()
    for every proccessed dirty block;

(2) checking of BH_Async_Write flag in
    nilfs_lookup_dirty_data_buffers() and
    nilfs_lookup_dirty_node_buffers();

(3) clearing of BH_Async_Write flag in nilfs_segctor_complete_write(),
    nilfs_abort_logs(), nilfs_forget_buffer(), nilfs_clear_dirty_page().

Reported-by: Jerome Poulin <jeromepoulin@gmail.com>
Reported-by: Anton Eliasson <devel@antoneliasson.se>
Cc: Paul Fertser <fercerpav@gmail.com>
Cc: ARAI Shun-ichi <hermes@ceres.dti.ne.jp>
Cc: Piotr Szymaniak <szarpaj@grubelek.pl>
Cc: Juan Barry Manuel Canham <Linux@riotingpacifist.net>
Cc: Zahid Chowdhury <zahid.chowdhury@starsolutions.com>
Cc: Elmer Zhang <freeboy6716@gmail.com>
Cc: Kenneth Langga <klangga@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-30 14:31:02 -07:00
Kirill A. Shutemov
7caef26767 truncate: drop 'oldsize' truncate_pagecache() parameter
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression").  Let's drop it.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:02 -07:00
Linus Torvalds
45d9a2220f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile 1 from Al Viro:
 "Unfortunately, this merge window it'll have a be a lot of small piles -
  my fault, actually, for not keeping #for-next in anything that would
  resemble a sane shape ;-/

  This pile: assorted fixes (the first 3 are -stable fodder, IMO) and
  cleanups + %pd/%pD formats (dentry/file pathname, up to 4 last
  components) + several long-standing patches from various folks.

  There definitely will be a lot more (starting with Miklos'
  check_submount_and_drop() series)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
  direct-io: Handle O_(D)SYNC AIO
  direct-io: Implement generic deferred AIO completions
  add formats for dentry/file pathnames
  kvm eventfd: switch to fdget
  powerpc kvm: use fdget
  switch fchmod() to fdget
  switch epoll_ctl() to fdget
  switch copy_module_from_fd() to fdget
  git simplify nilfs check for busy subtree
  ibmasmfs: don't bother passing superblock when not needed
  don't pass superblock to hypfs_{mkdir,create*}
  don't pass superblock to hypfs_diag_create_files
  don't pass superblock to hypfs_vm_create_files()
  oprofile: get rid of pointless forward declarations of struct super_block
  oprofilefs_create_...() do not need superblock argument
  oprofilefs_mkdir() doesn't need superblock argument
  don't bother with passing superblock to oprofile_create_stats_files()
  oprofile: don't bother with passing superblock to ->create_files()
  don't bother passing sb to oprofile_create_files()
  coh901318: don't open-code simple_read_from_buffer()
  ...
2013-09-05 08:50:26 -07:00
Al Viro
e95c311e17 git simplify nilfs check for busy subtree
Reviewed-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-03 22:52:50 -04:00
Vyacheslav Dubeyko
4bf93b50fd nilfs2: fix issue with counting number of bio requests for BIO_EOPNOTSUPP error detection
Fix the issue with improper counting number of flying bio requests for
BIO_EOPNOTSUPP error detection case.

The sb_nbio must be incremented exactly the same number of times as
complete() function was called (or will be called) because
nilfs_segbuf_wait() will call wail_for_completion() for the number of
times set to sb_nbio:

  do {
      wait_for_completion(&segbuf->sb_bio_event);
  } while (--segbuf->sb_nbio > 0);

Two functions complete() and wait_for_completion() must be called the
same number of times for the same sb_bio_event.  Otherwise,
wait_for_completion() will hang or leak.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23 09:51:22 -07:00
Vyacheslav Dubeyko
2df37a19c6 nilfs2: remove double bio_put() in nilfs_end_bio_write() for BIO_EOPNOTSUPP error
Remove double call of bio_put() in nilfs_end_bio_write() for the case of
BIO_EOPNOTSUPP error detection.  The issue was found by Dan Carpenter
and he suggests first version of the fix too.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-23 09:51:22 -07:00
Al Viro
84d08fa888 helper for reading ->d_count
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-07-05 18:59:33 +04:00
Vyacheslav Dubeyko
e5f7f84843 ] nilfs2: use atomic64_t type for inodes_count and blocks_count fields in nilfs_root struct
The cp_inodes_count and cp_blocks_count are represented as __le64 type in
on-disk structure (struct nilfs_checkpoint).  But analogous fields in
in-core structure (struct nilfs_root) are represented by atomic_t type.

This patch replaces atomic_t on atomic64_t type in representation of
inodes_count and blocks_count fields in struct nilfs_root.

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Joern Engel <joern@logfs.org>
Cc: Clemens Eisserer <linuxhippy@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:01 -07:00
Vyacheslav Dubeyko
c7ef972c44 nilfs2: implement calculation of free inodes count
Currently, NILFS2 returns 0 as free inodes count (f_ffree) and current
used inodes count as total file nodes in file system (f_files):

df -i
Filesystem      Inodes  IUsed   IFree IUse% Mounted on
/dev/loop0           2      2       0  100% /mnt/nilfs2

This patch implements real calculation of free inodes count.  First of
all, it is calculated total file nodes in file system as
(desc_blocks_count * groups_per_desc_block * entries_per_group).  Then, it
is calculated free inodes count as difference the total file nodes and
used inodes count.  As a result, we have such output for NILFS2:

df -i
Filesystem       Inodes   IUsed    IFree IUse% Mounted on
/dev/loop0      4194304 2114701  2079603   51% /mnt/nilfs2

Reported-by: Clemens Eisserer <linuxhippy@gmail.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Joern Engel <joern@logfs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:08:01 -07:00
Al Viro
1616abe841 [readdir] convert nilfs2
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:56:36 +04:00
Ryusuke Konishi
136e8770cd nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary
nilfs2: fix issue of nilfs_set_page_dirty for page at EOF boundary

DESCRIPTION:
 There are use-cases when NILFS2 file system (formatted with block size
lesser than 4 KB) can be remounted in RO mode because of encountering of
"broken bmap" issue.

The issue was reported by Anthony Doggett <Anthony2486@interfaces.org.uk>:
 "The machine I've been trialling nilfs on is running Debian Testing,
  Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc
  version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.35-2), but I've
  also reproduced it (identically) with Debian Unstable amd64 and Debian
  Experimental (using the 3.8-trunk kernel).  The problematic partitions
  were formatted with "mkfs.nilfs2 -b 1024 -B 8192"."

SYMPTOMS:
(1) System log contains error messages likewise:

    [63102.496756] nilfs_direct_assign: invalid pointer: 0
    [63102.496786] NILFS error (device dm-17): nilfs_bmap_assign: broken bmap (inode number=28)
    [63102.496798]
    [63102.524403] Remounting filesystem read-only

(2) The NILFS2 file system is remounted in RO mode.

REPRODUSING PATH:
(1) Create volume group with name "unencrypted" by means of vgcreate utility.
(2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>):

----------------[BEGIN SCRIPT]--------------------

VG=unencrypted
lvcreate --size 2G --name ntest $VG
mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest
mkdir /var/tmp/n
mkdir /var/tmp/n/ntest
mount /dev/mapper/$VG-ntest /var/tmp/n/ntest
mkdir /var/tmp/n/ntest/thedir
cd /var/tmp/n/ntest/thedir
sleep 2
date
darcs init
sleep 2
dmesg|tail -n 5
date
darcs whatsnew || true
date
sleep 2
dmesg|tail -n 5
----------------[END SCRIPT]--------------------

REPRODUCIBILITY: 100%

INVESTIGATION:
As it was discovered, the issue takes place during segment
construction after executing such sequence of user-space operations:

  open("_darcs/index", O_RDWR|O_CREAT|O_NOCTTY, 0666) = 7
  fstat(7, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
  ftruncate(7, 60)

The error message "NILFS error (device dm-17): nilfs_bmap_assign: broken
bmap (inode number=28)" takes place because of trying to get block
number for third block of the file with logical offset #3072 bytes.  As
it is possible to see from above output, the file has 60 bytes of the
whole size.  So, it is enough one block (1 KB in size) allocation for
the whole file.  Trying to operate with several blocks instead of one
takes place because of discovering several dirty buffers for this file
in nilfs_segctor_scan_file() method.

The root cause of this issue is in nilfs_set_page_dirty function which
is called just before writing to an mmapped page.

When nilfs_page_mkwrite function handles a page at EOF boundary, it
fills hole blocks only inside EOF through __block_page_mkwrite().

The __block_page_mkwrite() function calls set_page_dirty() after filling
hole blocks, thus nilfs_set_page_dirty function (=
a_ops->set_page_dirty) is called.  However, the current implementation
of nilfs_set_page_dirty() wrongly marks all buffers dirty even for page
at EOF boundary.

As a result, buffers outside EOF are inconsistently marked dirty and
queued for write even though they are not mapped with nilfs_get_block
function.

FIX:
This modifies nilfs_set_page_dirty() not to mark hole blocks dirty.

Thanks to Vyacheslav Dubeyko for his effort on analysis and proposals
for this issue.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Anthony Doggett <Anthony2486@interfaces.org.uk>
Reported-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24 16:22:52 -07:00
Kent Overstreet
a27bb332c0 aio: don't include aio.h in sched.h
Faster kernel compiles by way of fewer unnecessary includes.

[akpm@linux-foundation.org: fix fallout]
[akpm@linux-foundation.org: fix build]
Signed-off-by: Kent Overstreet <koverstreet@google.com>
Cc: Zach Brown <zab@redhat.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-07 20:16:25 -07:00
Vyacheslav Dubeyko
eb53b6db7a nilfs2: remove unneeded test in nilfs_writepage()
page->mapping->host cannot be NULL in nilfs_writepage(), so remove the
unneeded test.

The fixes the smatch warning: "fs/nilfs2/inode.c:211 nilfs_writepage()
error: we previously assumed 'inode' could be null (see line 195)".

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:05 -07:00
Vyacheslav Dubeyko
dc33f5f3c9 nilfs2: fix using of PageLocked() in nilfs_clear_dirty_page()
Change test_bit(PG_locked, &page->flags) to PageLocked().

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:04 -07:00
Vyacheslav Dubeyko
8c26c4e269 nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption
The NILFS2 driver remounts itself in RO mode in the case of discovering
metadata corruption (for example, discovering a broken bmap).  But
usually, this takes place when there have been file system operations
before remounting in RO mode.

Thereby, NILFS2 driver can be in RO mode with presence of dirty pages in
modified inodes' address spaces.  It results in flush kernel thread's
infinite trying to flush dirty pages in RO mode.  As a result, it is
possible to see such side effects as: (1) flush kernel thread occupies
50% - 99% of CPU time; (2) system can't be shutdowned without manual
power switch off.

SYMPTOMS:
(1) System log contains error message: "Remounting filesystem read-only".
(2) The flush kernel thread occupies 50% - 99% of CPU time.
(3) The system can't be shutdowned without manual power switch off.

REPRODUCTION PATH:
(1) Create volume group with name "unencrypted" by means of vgcreate utility.
(2) Run script (prepared by Anthony Doggett <Anthony2486@interfaces.org.uk>):

  ----------------[BEGIN SCRIPT]--------------------
  #!/bin/bash

  VG=unencrypted
  #apt-get install nilfs-tools darcs
  lvcreate --size 2G --name ntest $VG
  mkfs.nilfs2 -b 1024 -B 8192 /dev/mapper/$VG-ntest
  mkdir /var/tmp/n
  mkdir /var/tmp/n/ntest
  mount /dev/mapper/$VG-ntest /var/tmp/n/ntest
  mkdir /var/tmp/n/ntest/thedir
  cd /var/tmp/n/ntest/thedir
  sleep 2
  date
  darcs init
  sleep 2
  dmesg|tail -n 5
  date
  darcs whatsnew || true
  date
  sleep 2
  dmesg|tail -n 5
  ----------------[END SCRIPT]--------------------

(3) Try to shutdown the system.

REPRODUCIBILITY: 100%

FIX:

This patch implements checking mount state of NILFS2 driver in
nilfs_writepage(), nilfs_writepages() and nilfs_mdt_write_page()
methods.  If it is detected the RO mount state then all dirty pages are
simply discarded with warning messages is written in system log.

[akpm@linux-foundation.org: fix printk warning]
Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Acked-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Anthony Doggett <Anthony2486@interfaces.org.uk>
Cc: ARAI Shun-ichi <hermes@ceres.dti.ne.jp>
Cc: Piotr Szymaniak <szarpaj@grubelek.pl>
Cc: Zahid Chowdhury <zahid.chowdhury@starsolutions.com>
Cc: Elmer Zhang <freeboy6716@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:04 -07:00
Eric W. Biederman
7f78e03513 fs: Limit sys_mount to only request filesystem modules.
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.

A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.

Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.

Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives.  Allowing simple, safe,
well understood work-arounds to known problematic software.

This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work.  While writing this patch I saw a handful of such
cases.  The most significant being autofs that lives in the module
autofs4.

This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.

After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module.  The common pattern in the kernel is to call request_module()
without regards to the users permissions.  In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted.  In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.

Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-03 19:36:31 -08:00
Linus Torvalds
d895cb1af1 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...
2013-02-26 20:16:07 -08:00