.read_alarm is not necessary to read the current alarm because it is
recorded in the aie_timer and so rtc_read_alarm() will never call
rtc_read_alarm_internal() which is the only function calling the callback.
Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Reported-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Fixes: 7ae41220ef ("rtc: introduce features bitfield")
Tested-by: Philippe Schenker <philippe.schenker@toradex.com>
Link: https://lore.kernel.org/r/20230214222754.582582-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Clang static analysis reports this issue
interface.c:810:8: warning: Passed-by-value struct
argument contains uninitialized data
now = rtc_tm_to_ktime(tm);
^~~~~~~~~~~~~~~~~~~
tm is set by a successful call to __rtc_read_time()
but its return status is not checked. Check if
it was successful before setting the enabled flag.
Move the decl of err to function scope.
Fixes: 2b2f5ff00f ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20220326194236.2916310-1-trix@redhat.com
Handle alarms with a minute resolution in the core. Until now drivers have
been open coding the seconds part removal and have been doing that wrongly.
Most of them are rounding up which means the allow the system to miss
deadlines. So, round down and let __rtc_set_alarm return immediately if the
time has already passed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211107225458.111068-1-alexandre.belloni@bootlin.com
Now that the core is aware of whether alarms are available, it is possible
to decide whether UIE emulation is required before actually trying to set
the alarm.
This greatly simplifies rtc_update_irq_enable because there is now only one
error value to track and is not relying on the return value of
__rtc_set_alarm anymore.
Tested-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210418000023.995758-3-alexandre.belloni@bootlin.com
Introduce a bitfield to allow the drivers to announce the available
features for an RTC.
The main use case would be to better handle alarms, that could be present
or not or have a minute resolution or may need a correct week day to be set.
Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms
are available instead of relying on the presence of ops->set_alarm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-2-alexandre.belloni@bootlin.com
Fix kerneldoc warnings:
drivers/rtc/interface.c:619: warning: Function parameter or member 'num' not described in 'rtc_handle_legacy_irq'
drivers/rtc/interface.c:619: warning: Function parameter or member 'mode' not described in 'rtc_handle_legacy_irq'
drivers/rtc/interface.c:804: warning: Function parameter or member 'rtc' not described in 'rtc_timer_enqueue'
drivers/rtc/interface.c:804: warning: Function parameter or member 'timer' not described in 'rtc_timer_enqueue'
drivers/rtc/interface.c:864: warning: Function parameter or member 'rtc' not described in 'rtc_timer_remove'
drivers/rtc/interface.c:864: warning: Function parameter or member 'timer' not described in 'rtc_timer_remove'
drivers/rtc/interface.c:900: warning: Function parameter or member 'work' not described in 'rtc_timer_do_work'
drivers/rtc/interface.c:1035: warning: Function parameter or member 'rtc' not described in 'rtc_read_offset'
drivers/rtc/interface.c:1035: warning: Function parameter or member 'offset' not described in 'rtc_read_offset'
drivers/rtc/interface.c:1070: warning: Function parameter or member 'rtc' not described in 'rtc_set_offset'
drivers/rtc/interface.c:1070: warning: Function parameter or member 'offset' not described in 'rtc_set_offset'
Link: https://lore.kernel.org/r/20191127082932.666869-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When setting the time in the future with the uie timer enabled,
rtc_timer_do_work will loop for a while because the expiration of the uie
timer was way before the current RTC time and a new timer will be enqueued
until the current rtc time is reached.
If the uie timer is enabled, disable it before setting the time and enable
it after expiring current timers (which may actually be an alarm).
This is the safest thing to do to ensure the uie timer is still
synchronized with the RTC, especially in the UIE emulation case.
Reported-by: syzbot+08116743f8ad6f9a6de7@syzkaller.appspotmail.com
Fixes: 6610e0893b ("RTC: Rework RTC code to use timerqueue for events")
Link: https://lore.kernel.org/r/20191020231320.8191-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For rtc drivers where rtc->range_max is set U64_MAX, like the PS3 rtc,
rtc_valid_range() always returns -ERANGE. This is because the local
variable range_max has type time64_t, so the test
if (time < range_min || time > range_max)
return -ERANGE;
becomes (time < range_min || time > -1), which always evaluates to true.
timeu64_t should be used, since it's the type of rtc->range_max.
Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>
Link: https://lore.kernel.org/r/20190927110446.GA6289@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a helper to match the device name for device lookup. Also
reuse this generic exported helper for the existing bus_find_device_by_name().
and add similar variants for driver/class.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexander Aring <alex.aring@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: linux-leds@vger.kernel.org
Cc: linux-rtc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: linux-wpan@vger.kernel.org
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Stefan Schmidt <stefan@datenfreihafen.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20190723221838.12024-2-suzuki.poulose@arm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Callers of hrtimer_forward_now() should save the return value in u64.
function rtc_pie_update_irq() stores it in variable 'count' of type int
change type of count from unsigned long to u64 to solve the issue.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20190618042351.9692-1-puranjay12@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There are no users of set_mms and set_mmss64 as they have all been
converted to set_time and are handling the tm to time conversion on their
own.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The mentioned function pointer is long gone since early 2011. Remove the
reference in the comment and reword it slightly.
Fixes: 51ba60c5bb ("RTC: Cleanup rtc_class_ops->update_irq_enable()")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use SPDX-License-Identifier instead of a verbose license text. Also fix the
block comment alignment.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
All the remaining users of rtc_timers are passing the rtc_device as private
data. Enforce that and rename private_data to rtc.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use %ptR instead of open coded variant to print content of
struct rtc_time in human readable format.
Note, we drop the validation option. This is only used in
a deprecated ABI and is mostly wrong as many RTCs will still be valid
after 2100.
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stale mentions of irq_task are left in the kerneldoc after its removal.
Remove them.
There is still one indirect mention left but commit 3c8bb90efb ("rtc: Fix
hrtimer deadlock") can probably be reverted now.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Subsystem:
- new helpers to add custom sysfs attributes
- struct rtc_task removal along with rtc_irq_register/rtc_irq_unregister
- rtc_irq_set_state and rtc_irq_set_freq are not exported anymore
Drivers:
- armada38x: reset after rtc power loss
- ds1307: now supports m41t11
- isl1208: now supports isl1219 and tamper detection
- pcf2127: internal SRAM support
-----BEGIN PGP SIGNATURE-----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=cAQ9
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"It is now possible to add custom sysfs attributes while avoiding a
possible race condition. Unused code has been removed resulting in a
nice reduction of the code base. And more drivers have been switched
to SPDX by their maintainers.
Summary:
Subsystem:
- new helpers to add custom sysfs attributes
- struct rtc_task removal along with rtc_irq_[un]register()
- rtc_irq_set_state and rtc_irq_set_freq are not exported anymore
Drivers:
- armada38x: reset after rtc power loss
- ds1307: now supports m41t11
- isl1208: now supports isl1219 and tamper detection
- pcf2127: internal SRAM support"
* tag 'rtc-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1307: simplify hwmon config
rtc: s5m: Add SPDX license identifier
rtc: maxim: Add SPDX license identifiers
rtc: isl1219: add device tree documentation
rtc: isl1208: set ev-evienb bit from device tree
rtc: isl1208: Add "evdet" interrupt source for isl1219
rtc: isl1208: add support for isl1219 with tamper detection
rtc: sysfs: facilitate attribute add to rtc device
rtc: remove struct rtc_task
char: rtc: remove task handling
rtc: pcf85063: preserve control register value between stop and start
rtc: sh: remove unused variable rtc_dev
rtc: unexport rtc_irq_set_*
rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
rtc: remove irq_task and irq_task_lock
rtc: remove rtc_irq_register/rtc_irq_unregister
rtc: sh: remove dead code
rtc: sa1100: don't set PIE frequency
rtc: ds1307: support m41t11 variant
rtc: ds1307: fix data pointer to m41t0
...
The offset needs to be added after reading the alarm value.
It also needs to be subtracted after the now < alarm test.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When using RTC_ALM_SET or RTC_WKALM_SET with rtc_wkalrm.enabled not set,
rtc_timer_enqueue() is not called and rtc_set_alarm() may succeed but the
subsequent RTC_AIE_ON ioctl will fail. RTC_ALM_READ would also fail in that
case.
Ensure rtc_set_alarm() fails when alarms are not supported to avoid letting
programs think the alarms are working for a particular RTC when they are
not.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
From our investigation for all RTC drivers, 1 driver will be expired before
year 2017, 7 drivers will be expired before year 2038, 23 drivers will be
expired before year 2069, 72 drivers will be expired before 2100 and 104
drivers will be expired before 2106. Especially for these early expired
drivers, we need to expand the RTC range to make the RTC can still work
after the expired year.
So we can expand the RTC range by adding one offset to the time when reading
from hardware, and subtracting it when writing back. For example, if you have
an RTC that can do 100 years, and currently is configured to be based in
Jan 1 1970, so it can represents times from 1970 to 2069. Then if you change
the start year from 1970 to 2000, which means it can represents times from
2000 to 2099. By adding or subtracting the offset produced by moving the wrap
point, all times between 1970 and 1999 from RTC hardware could get interpreted
as times from 2070 to 2099, but the interpretation of dates between 2000 and
2069 would not change.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC range validation code can be factored into rtc_valid_range()
function to avoid duplicate code.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a way for drivers to inform the core of the supported date/time range.
The core can then check whether the date/time or alarm is in the range
before calling ->set_time, ->set_mmss or ->set_alarm. It returns -ERANGE
when the time is out of range.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
It will be more helpful to add some tracepoints to track RTC actions when
debugging RTC driver. Below sample is that we set/read the RTC time, then
set 2 alarms, so we can see the trace logs:
set/read RTC time:
kworker/0:1-67 [000] 21.814245: rtc_set_time: UTC (1510301580) (0)
kworker/0:1-67 [000] 21.814312: rtc_read_time: UTC (1510301580) (0)
set the first alarm timer:
kworker/0:1-67 [000] 21.829238: rtc_timer_enqueue: RTC timer:(ffffffc15eb49bc8) expires:1510301700000000000 period:0
kworker/0:1-67 [000] 22.018279: rtc_set_alarm: UTC (1510301700) (0)
set the second alarm timer:
kworker/0:1-67 [000] 22.230284: rtc_timer_enqueue: RTC timer:(ffffff80088e6430) expires:1510301820000000000 period:0
the first alarm timer was expired:
kworker/0:1-67 [000] 145.155584: rtc_timer_dequeue: RTC timer:(ffffffc15eb49bc8) expires:1510301700000000000 period:0
kworker/0:1-67 [000] 145.155593: rtc_timer_fired: RTC timer:(ffffffc15eb49bc8) expires:1510301700000000000 period:0
kworker/0:1-67 [000] 145.172504: rtc_set_alarm: UTC (1510301820) (0)
the second alarm timer was expired:
kworker/0:1-67 [000] 269.102353: rtc_timer_dequeue: RTC timer:(ffffff80088e6430) expires:1510301820000000000 period:0
kworker/0:1-67 [000] 269.102360: rtc_timer_fired: RTC timer:(ffffff80088e6430) expires:1510301820000000000 period:0
disable alarm irq:
kworker/0:1-67 [000] 269.102469: rtc_alarm_irq_enable: disable RTC alarm IRQ (0)
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC offset correction documentation is not very clear about the
exact relationship between "offset" and the effect it has on the RTC.
Supplement the documentation with an equation giving the relationship.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
If there is any non expired timer in the queue, the RTC alarm is never set.
This is an issue when adding a timer that expires before the next non
expired timer.
Ensure the RTC alarm is set in that case.
Fixes: 2b2f5ff00f ("rtc: interface: ignore expired timers when enqueuing new timers")
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
In function __rtc_read_alarm() its possible for an alarm time-stamp to
be invalid even after replacing missing components with current
time-stamp. The condition 'alarm->time.tm_year < 70' will trigger this
case and will cause the call to 'rtc_tm_to_time64(&alarm->time)'
return a negative value for variable t_alm.
While handling alarm rollover this negative t_alm (assumed to seconds
offset from '1970-01-01 00:00:00') is converted back to rtc_time via
rtc_time64_to_tm() which results in this error log with seemingly
garbage values:
"rtc rtc0: invalid alarm value: -2-1--1041528741
2005511117:71582844:32"
This error was generated when the rtc driver (rtc-opal in this case)
returned an alarm time-stamp of '00-00-00 00:00:00' to indicate that
the alarm is disabled. Though I have submitted a separate fix for the
rtc-opal driver, this issue may potentially impact other
existing/future rtc drivers.
To fix this issue the patch validates the alarm time-stamp just after
filling up the missing datetime components and if rtc_valid_tm() still
reports it to be invalid then bails out of the function without
handling the rollover.
Reported-by: Steve Best <sbest@redhat.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
This patch fixes a RTC wakealarm issue, namely, the event fires during
hibernate and is not cleared from the list, causing hwclock to block.
The current enqueuing does not trigger an alarm if any expired timers
already exist on the timerqueue. This can occur when a RTC wake alarm
is used to wake a machine out of hibernate and the resumed state has
old expired timers that have not been removed from the timer queue.
This fix skips over any expired timers and triggers an alarm if there
are no pending timers on the timerqueue. Note that the skipped expired
timer will get reaped later on, so there is no need to clean it up
immediately.
The issue can be reproduced by putting a machine into hibernate and
waking it with the RTC wakealarm. Running the example RTC test program
from tools/testing/selftests/timers/rtctest.c after the hibernate will
block indefinitely. With the fix, it no longer blocks after the
hibernate resume.
BugLink: http://bugs.launchpad.net/bugs/1333569
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
rtc drivers are supposed to set values they don't support to -1. To
simplify this for drivers and also make it harder for them to get it
wrong initialize the values to -1.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
A number of rtc devices, such as the NXP pcf2123 include a facility
to adjust the clock in order to compensate for temperature or a
crystal, capacitor, etc, that results in the rtc clock not running
at exactly 32.768 kHz.
Data sheets I have seen refer to this as a clock offset, and measure it
in parts per million, however they often reference ppm to 2 digits of
precision, which makes integer ppm less than ideal.
We use parts per billion, which more than covers the precision needed
and works nicely within 32 bits
Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there
is no need to do that again from its callers. Drop it.
gemini driver was using likely() for a failure case while the rtc driver
is getting registered. That looks wrong and it should really be
unlikely. But because we are killing all the unlikely() flags, lets kill
that too.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Now rtc_set_mmss() has no users, just remove it.
We still have rtc_set_time() doing similar things.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
The rtc_timer_cancel() always returns 0 and cannot fail (calls only
other void-returning functions).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
__rtc_read_time logs should be debug logs instead of error logs.
For example, when the RTC clock is not set, it's not really useful
to print a kernel error log every time someone tries to read the clock:
~ # hwclock -r
[ 604.508263] rtc rtc0: read_time: fail to read
hwclock: RTC_RD_TIME: Invalid argument
If there's a real error, it's likely that lower level or higher level
code will tell it anyway. Make these logs debug logs, and also print
the error code for the read failure.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the rtc_class_op's set_mmss() function takes a 32-bit
second value (on 32-bit systems), which is problematic for dates
past y2038.
This patch provides a safe version named set_mmss64() using
y2038 safe time64_t.
After this patch, set_mmss() is deprecated and all its users
will be fixed to use set_mmss64(), it can be removed when having
no users.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
[jstultz: Add whitespace fix for checkpatch]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1427945681-29972-8-git-send-email-john.stultz@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, interface.c uses y2038 problematic rtc_tm_to_time()
and rtc_time_to_tm(). So replace them with their corresponding
y2038-safe versions: rtc_tm_to_time64() and rtc_time64_to_tm().
Cc: pang.xunlei <pang.xunlei@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
rtc_timer_do_work() only judges -ETIME failure of__rtc_set_alarm(), but
doesn't handle other failures like -EIO, -EBUSY, etc.
If there is a failure other than -ETIME, the next rtc_timer will stay in
the timerqueue. Then later rtc_timers will be enqueued directly because
they have a later expires time, so the alarm irq will never be programmed.
When such failures happen, this patch will retry __rtc_set_alarm(), if
still can't program the alarm time, it will remove current rtc_timer from
timerqueue and fetch next one, thus preventing it from affecting other rtc
timers.
Signed-off-by: Xunlei Pang <pang.xunlei@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Arnd Bergmann <arnd.bergmann@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some rtc devices always return '0' when rtc_class_ops.read_time is
called. So if rtc_time isn't verified in callback, rtc interface cannot
know whether rtc_time is valid.
Check rtc_time by using 'rtc_valid_tm' in '__rtc_read_time'. And add
the message for debugging.
Signed-off-by: Hyogi Gim <hyogi.gim@lge.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __rtc_set_alarm(), the error after __rtc_read_time() is not checked.
If rtc device fail to read time, we cannot guarantee the following
process.
Add the verification code for returned __rtc_read_time() error.
Signed-off-by: Hyogi Gim <hyogi.gim@lge.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
