dtx_diff suggests to use <(...) syntax to pipe two inputs into it, but
this has never worked: The /proc/self/fds/... paths passed by the shell
will fail the `[ -f "${dtx}" ] && [ -r "${dtx}" ]` check in compile_to_dts,
but even with this check removed, the function cannot work: hexdump will
eat up the DTB magic, making the subsequent dtc call fail, as a pipe
cannot be rewound.
Simply remove this broken example, as there is already an alternative one
that works fine.
Fixes: 10eadc253d ("dtc: create tool to diff device trees")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113081918.10387-1-matthias.schiffer@ew.tq-group.com
The vendor prefix for Wingtech [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] http://www.wingtech.com/en
[2] arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103110.GA4488@standask-GA-A55M-S2HP
The vendor prefix for Thundercomm [1] is used in device tree [2], but
was not documented so far. Add it to the schema to document it.
[1] https://www.thundercomm.com/
[2] arch/arm64/boot/dts/qcom/sdm845-db845c.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103036.GA4456@standask-GA-A55M-S2HP
The vendor prefix for Huawei [1] is used in device trees [2][3], but was
not documented so far. Add it to the schema to document it.
[1] https://www.huawei.com/en/
[2] arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
[3] arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113103005.GA4421@standask-GA-A55M-S2HP
The vendor prefix for F(x)tec [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] https://www.fxtec.com/
[2] arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113102926.GA4388@standask-GA-A55M-S2HP
The vendor prefix for 8devices [1] is used in device tree [2], but was
not documented so far. Add it to the schema to document it.
[1] https://www.8devices.com/
[2] arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220113102842.GA4357@standask-GA-A55M-S2HP
Commit bcd56fe1aa ("power: reset: gpio-restart: increase priority
slightly") changed the default restart priority 129, but did not update
the documentation. Correct this, so the driver and documentation have
the same default value.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220110214456.67087-1-sander@svanheule.net
resets/reset-names are device specific and don't belong in the MDIO bus
schema. For example, it doesn't match what is defined for the
"qca,ar9331-switch" binding which defines "reset-names" to be "switch"
rather than "phy". Neither name is that useful IMO.
Other child properties are also device specific, but those won't conflict
with device schemas.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220111170248.3160841-1-robh@kernel.org
The UFS for Exynos7 SoC clock controller requires additional input
clocks for the FSYS1 clock controller. Update the bindings to reflect
this, at least in theory. In practice, these input clocks are ignored,
so it is rather adjusting of bindings to existing DTS, without affecting
any real users. I understand that is not how it should be done,
though...
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220102115356.75796-5-krzysztof.kozlowski@canonical.com
The '/bits/ 64' notation applies the next <> list of values. Another <> list
is encoded as 32-bits by default. IOW, each <> list needs to be preceeded
with '/bits/ 64'.
While the dts format allows this, as a rule we don't mix sizes for DT
properties since all size information is lost in the dtb file.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220107032026.2408196-1-robh@kernel.org
The 'maxim,rcomp' is defined as a uint32, but the description and users all
say it is uint8-array with 1 or 2 elements. The tools missed checking this
case.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220107030433.2381616-1-robh@kernel.org
The 2nd example has an interrupts cells size of 4, but the 'interrupts'
property has 3 cells. The example should also be separate since the cell
size differs in each example.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-5-robh@kernel.org
'interrupts' does not take a phandle, so remove it in the example.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-4-robh@kernel.org
The example nodes have different sized interrupt cells which is not valid
given no interrupt-parent is specified. As provider examples don't need to
show the consumer side in the first place, just drop the consumer node.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-1-robh@kernel.org
'interrupt-parent' is never required as it can be in a parent node or a
parent node itself can be an interrupt provider. Where exactly it lives is
outside the scope of a binding schema.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220107031905.2406176-1-robh@kernel.org
The '/bits/ 8' notation applies the next <> list of values. Another <> list
is encoded as 32-bits by default. IOW, each <> list needs to be preceeded
with '/bits/ 8'.
While the dts format allows this, as a rule we don't mix sizes for DT
properties since all size information is lost in the dtb file.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107030419.2380198-1-robh@kernel.org
Each independent example should be a separate entry. This allows for
'interrupts' to have different cell sizes.
The first example also has a phandle in 'interrupts', so drop the phandle.
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220106182518.1435497-8-robh@kernel.org
The schemas for MDIO bus nodes range from missing to duplicating
everything in mdio.yaml. The MDIO bus node schemas only need to
reference mdio.yaml, define any binding specific properties, and define
'unevaluatedProperties: false'. This ensures that MDIO nodes only
contain defined properties. With this, any duplicated properties can
be removed.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Cc: "Fernández Rojas" <noltari@gmail.com>
Cc: John Crispin <john@phrozen.org>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220105151009.3093506-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the following warnings
are generated in the net bindings:
Documentation/devicetree/bindings/net/qca,ar71xx.example.dt.yaml: ethernet@19000000: Unevaluated properties are not allowed ('qca,ethcfg' was unexpected)
Documentation/devicetree/bindings/net/stm32-dwmac.example.dt.yaml: ethernet@40028000: Unevaluated properties are not allowed ('reg-names', 'snps,pbl' were unexpected)
Documentation/devicetree/bindings/net/ti,cpsw-switch.example.dt.yaml: mdio@1000: Unevaluated properties are not allowed ('clocks', 'clock-names' were unexpected)
Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.example.dt.yaml: mdio@f00: Unevaluated properties are not allowed ('clocks', 'clock-names' were unexpected)
Add the missing properties/nodes as necessary.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Manivannan Sadhasivam <mani@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Cc: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Cc: "G. Jaya Kumaran" <vineetha.g.jaya.kumaran@intel.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Christophe Roullier <christophe.roullier@foss.st.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-actions@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206174153.2296977-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the properties
'snps,pbl', 'snps,txpbl', and 'snps,rxpbl' are not allowed in the
examples for some of the DWMAC versions:
Documentation/devicetree/bindings/net/intel,dwmac-plat.example.dt.yaml: ethernet@3a000000: Unevaluated properties are not allowed ('snps,pbl', 'mdio0' were unexpected)
Documentation/devicetree/bindings/net/stm32-dwmac.example.dt.yaml: ethernet@5800a000: Unevaluated properties are not allowed ('reg-names', 'snps,pbl' were unexpected)
Documentation/devicetree/bindings/net/stm32-dwmac.example.dt.yaml: ethernet@40028000: Unevaluated properties are not allowed ('reg-names', 'snps,pbl' were unexpected)
Documentation/devicetree/bindings/net/stm32-dwmac.example.dt.yaml: ethernet@40027000: Unevaluated properties are not allowed ('reg-names', 'snps,pbl' were unexpected)
Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.example.dt.yaml: ethernet@28000000: Unevaluated properties are not allowed ('snps,txpbl', 'snps,rxpbl', 'mdio0' were unexpected)
This appears to be an oversight, so fix it by allowing the properties
on the v3.50a, v4.10a, and v4.20a versions of the DWMAC.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174147.2296770-1-robh@kernel.org
An MDIO bus can have devices other than ethernet PHYs on it, so it
should allow for any node name rather than just 'ethernet-phy'.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206174139.2296497-1-robh@kernel.org
In commit 8a5a75e5e9 ("of/fdt: Make sure no-map does not remove
already reserved regions") we returned -EBUSY when trying to mark
regions as no-map when they intersect with reserved memory. The goal was
to find bad no-map reserved memory DT nodes that would unmap the kernel
text/data sections.
The problem is the reserved memory check will still trigger if the DT
has a /memreserve/ that completely subsumes the no-map memory carveouts
in the reserved memory node _and_ that region is also not part of the
memory reg property. For example in sc7180.dtsi we have the following
reserved-memory and memory node:
memory@80000000 {
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
smem_mem: memory@80900000 {
reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
and the memreserve filled in by the bootloader is
/memreserve/ 0x80800000 0x400000;
while the /memory node is transformed into
memory@80000000 {
/* The bootloader fills in the size, and adds another region */
reg = <0 0x80000000 0 0x00800000>,
<0 0x80c00000 0 0x7f200000>;
};
The smem region is doubly reserved via /memreserve/ and by not being
part of the /memory reg property. This leads to the following warning
printed at boot.
OF: fdt: Reserved memory: failed to reserve memory for node 'memory@80900000': base 0x0000000080900000, size 2 MiB
Otherwise nothing really goes wrong because the smem region is not going
to be mapped by the kernel's direct linear mapping given that it isn't
part of the memory node. Therefore, let's only consider this to be a
problem if we're trying to mark a region as no-map and it is actually
memory that we're intending to keep out of the kernel's direct mapping
but it's already been reserved.
Acked-by: Mike Rapoport <rppt@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Quentin Perret <qperret@google.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 8a5a75e5e9 ("of/fdt: Make sure no-map does not remove already reserved regions")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107194233.2793146-1-swboyd@chromium.org
Eliminate the following coccicheck warning:
./drivers/of/unittest.c:1961:2-3: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107002826.77939-1-yang.lee@linux.alibaba.com
The cells_name field of of_phandle_iterator might be NULL. Use the
phandle name instead. With this change instead of:
OF: /soc/pinctrl@1000000: (null) = 3 found 2
We get:
OF: /soc/pinctrl@1000000: phandle pinctrl@1000000 needs 3, found 2
Which is a more helpful messages making DT debugging easier.
In this particular example the phandle name looks like duplicate of the
same node name. But note that the first node is the parent node
(it->parent), while the second is the phandle target (it->node). They
happen to be the same in the case that triggered this improvement. See
commit 72cb4c48a4 ("arm64: dts: qcom: ipq6018: Fix gpio-ranges
property").
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/f6a68e0088a552ea9dfd4d8e3b5b586d92594738.1640881913.git.baruch@tkos.co.il
The cell_count field of of_phandle_iterator is the number of cells we
expect in the phandle arguments list when cells_name is missing. The
error message should show the number of cells we actually see.
Fixes: af3be70a32 ("of: Improve of_phandle_iterator_next() error message")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/96519ac55be90a63fa44afe01480c30d08535465.1640881913.git.baruch@tkos.co.il
With 'unevaluatedProperties' support enabled, the novatek,nt36672a
binding has a new warning:
Documentation/devicetree/bindings/display/panel/novatek,nt36672a.example.dt.yaml: panel@0: Unevaluated properties are not allowed ('vddi0-supply', '#address-cells', '#size-cells' were unexpected)
Based on dts files, 'vddi0-supply' does appear to be the correct name.
Drop '#address-cells' and '#size-cells' which aren't needed.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20211221125125.1194554-1-robh@kernel.org
Some overlays are tracked when they are applied. The tracked overlays
are later removed after the overlay tests are completed. The old
implementation makes assumptions about the expected values for
overlay changeset id created by the overlay apply which result
in fragile code. The new code removes the assumptions.
A symptom that exposes a problem with the tracking code is a
warning "UBSAN: shift-out-of-bounds in drivers/of/unittest.c:1933:36",
Kernel Version: 5.15-rc7, PPC-64, Talos II. This results from variable
"id" value of -1 in the final line of of_unittest_untrack_overlay().
Reported-by: erhard_f@mailbox.org
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-3-frowand.list@gmail.com
Unittest inconsistently interchanges overlay changeset id and
overlay id. Change variable names of overlay id to overlay
changeset id.
Do not fix variable names in the overlay tracking functions
of_unittest_overlay_tracked(), of_unittest_track_overlay(), and
of_unittest_destroy_tracked_overlays() which will be replaced in
a following commit.
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220101033329.1277779-2-frowand.list@gmail.com
Enable port inside panel bindings.
Fixes warnings generated by `make qcom-apq8064-asus-nexus7-flo.dtb` as:
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dt.yaml: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211224195354.78362-1-david@ixit.cz
