The functionality of ext3 is fully supported by ext4 driver. Major
distributions (SUSE, RedHat) already use ext4 driver to handle ext3
filesystems for quite some time. There is some ugliness in mm resulting
from jbd cleaning buffers in a dirty page without cleaning page dirty
bit and also support for buffer bouncing in the block layer when stable
pages are required is there only because of jbd. So let's remove the
ext3 driver. This saves us some 28k lines of duplicated code.
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
It's always been a hassle that if an external journal's
device number changes, the filesystem won't mount.
And since boot-time enumeration can change, device number
changes aren't unusual.
The current mechanism to update the journal location is by
passing in a mount option w/ a new devnum, but that's a hassle;
it's a manual approach, fixing things after the fact.
Adding a mount option, "-o journal_path=/dev/$DEVICE" would
help, since then we can do i.e.
# mount -o journal_path=/dev/disk/by-label/$JOURNAL_LABEL ...
and it'll mount even if the devnum has changed, as shown here:
# losetup /dev/loop0 journalfile
# mke2fs -L mylabel-journal -O journal_dev /dev/loop0
# mkfs.ext3 -L mylabel -J device=/dev/loop0 /dev/sdb1
Change the journal device number:
# losetup -d /dev/loop0
# losetup /dev/loop1 journalfile
And today it will fail:
# mount /dev/sdb1 /mnt/test
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
# dmesg | tail -n 1
[17343.240702] EXT3-fs (sdb1): error: couldn't read superblock of external journal
But with this new mount option, we can specify the new path:
# mount -o journal_path=/dev/loop1 /dev/sdb1 /mnt/test
#
(which does update the encoded device number, incidentally):
# umount /dev/sdb1
# dumpe2fs -h /dev/sdb1 | grep "Journal device"
dumpe2fs 1.41.12 (17-May-2010)
Journal device: 0x0701
But best of all we can just always mount by journal-path, and
it'll always work:
# mount -o journal_path=/dev/disk/by-label/mylabel-journal /dev/sdb1 /mnt/test
#
So the journal_path option can be specified in fstab, and as long as
the disk is available somewhere, and findable by label (or by UUID),
we can mount.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 00eacd6 ("ext3: make ext3 mount default to barrier=1") changed
the default barrier mount option for ext3. The documentation needs to
be updated, so this patch does that.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
For a long time now orlov is the default block allocator in the ext3. It
performs better than the old one and no one seems to claim otherwise so
we can safely drop it and make oldalloc and orlov mount option
deprecated.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In Documentation/filesystems/ext3.txt, the section "useful links"
provides two links which link to ibm developerworks articles. While
the second one can be redirected to the latest one, the first one
http://www.ibm.com/developerworks/library/l-fs7.html
fails to be redirected.
Update the 2 links to the latest ones.
Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Bh and nobh mount option has been deprecated in ext4
(206f7ab4f4) and in ext3
(4c4d390122)
so remove those options from documentation.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
ext4 was updated to accept barrier/nobarrier mount options
in addition to the older barrier=0/1. The barrier story
is complex enough, we should help people by making the options
the same at least, even if the defaults are different.
This patch allows the barrier/nobarrier mount options for ext3,
while keeping nobarrier the default.
It also unconditionally displays barrier status in show_options,
and prints a message at mount time if barriers are not enabled,
just as ext4 does.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Users on the list recently complained about differences across
filesystems w.r.t. how to mount without a journal replay.
In the discussion it was noted that xfs's "norecovery" option is
perhaps more descriptively accurate than "noload," so let's make
that an alias for ext3.
Also show this status in /proc/mounts
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
ext3 has quite unexpected semantics or "ro" and defaults are
not what they are documented to be, due to mkfs override.
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Trivial patch to fix bad links in the ext2 and ext3 documentation.
Signed-off-by: Jody McIntyre <scjody@sun.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the journal doesn't abort when it gets an IO error in file data blocks,
the file data corruption will spread silently. Because most of
applications and commands do buffered writes without fsync(), they don't
notice the IO error. It's scary for mission critical systems. On the
other hand, if the journal aborts whenever it gets an IO error in file
data blocks, the system will easily become inoperable. So this patch
introduces a filesystem option to determine whether it aborts the journal
or just call printk() when it gets an IO error in file data.
If you mount a ext3 fs with data_err=abort option, it aborts on file data
write error. If you mount it with data_err=ignore, it doesn't abort, just
call printk(). data_err=ignore is the default.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove Andrew Morton's http://www.zip.com.au/~akpm/ urls, update to new
ones when necessary, delete references otherwise.
There are still instances of that living in:
Documentation/zh_CN/HOWTO
Documentation/zh_CN/SubmittingPatches
Documentation/ko_KR/HOWTO
Documentation/ja_JP/SubmittingPatches
Signed-off-by: Francois Cami <francois.cami@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix some grammar in the explanation of the Journal Block Device layer.
Signed-off-by: Shaun Zinck <shaun.zinck@gmail.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
This patch adds "-o bh" option to force use of buffer_heads. This option
is needed when we make "nobh" as default - and if we run into problems.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Undocument the non-working resize= mount option in ext3, and add some
references to the ext2resize package instead, which appears to be the only
proper way of doing online resizing of ext3 filesystems.
Signed-off-by: Tore Anderson <tore@fud.no>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patch below adds a new mount option to allow the external journal
device to be specified.
The syntax is as follows:
# mount -t ext3 -o journal_dev=0x0820 ...
where 0x0820 means major=8 and minor=32.
Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reported by Jacques de Mer and Daniel Drake <dsd@gentoo.org>.
Signed-off-by: Andreas Gruenbacher <agruen@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
