HMT_MEDIUM_PPR_DISCARD is a macro which is present at the start of most
of our first level exception handlers. It conditionally executes a
HMT_MEDIUM instruction, which sets the processor priority to medium.
On on modern systems, ie. Power7 and later, it is nop'ed out at boot.
All it does is make the exception vectors more cramped, and consume 4
bytes of icache.
On old systems it has the effect of boosting the processor priority at
the start of exception processing. If we were previously in the idle
loop for example, we may be at low or very low priority. This is
desirable as we want to process the exception as fast as possible.
However looking closely at the generated code, we see that in all cases
we execute another HMT_MEDIUM just four instructions later. With code
patching applied, the final code on an old (Power6) system will look
like, eg:
c000000000000300 <data_access_pSeries>:
c000000000000300: 7c 42 13 78 mr r2,r2 <-
c000000000000304: 7d b2 43 a6 mtsprg 2,r13
c000000000000308: 7d b1 42 a6 mfsprg r13,1
c00000000000030c: f9 2d 00 80 std r9,128(r13)
c000000000000310: 60 00 00 00 nop
c000000000000314: 7c 42 13 78 mr r2,r2 <-
So I suggest that the added code complexity of HMT_MEDIUM_PPR_DISCARD is
not justified by the benefit of boosting the processor priority for the
duration of four instructions, and therefore we drop it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
There are no longer any users of enter_rtas() outside of rtas.c, so make
it "private", by moving the declaration inside rtas.c. Hopefully this
will encourage people to use one of the wrappers which takes the sharp
edges off the RTAS calling sequence.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Although call_rtas_display_status() does actually want to use the
regular RTAS locking, it doesn't want the extra logic that is in
rtas_call(), so currently it open codes the logic.
Instead we can use rtas_call_unlocked(), after taking the RTAS lock.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Most users of RTAS (Run-Time Abstraction Services) use rtas_call(),
which deals with locking as well as endian handling.
However we have two users outside of rtas.c that can't use rtas_call()
because they have different locking requirements.
The hotplug CPU code can't take the RTAS lock because the CPU would go
offline with the lock held and no other CPUs would be able to call RTAS
until the CPU came back online.
The xmon code doesn't want to take the lock because it would risk dead
locking when we are trying to recover from a crash.
Both sites required multiple patches when we added little endian
support, proving that programmers can't do endian right.
Although that ship has sailed, we can still clean the code up by
providing an unlocked version of rtas_call() which avoids the need to
open code the logic elsewhere.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Long ago, only in the lab, there was OPALv1 and OPALv2. Now there is
just OPALv3, with nobody ever expecting anything on pre-OPALv3 to
be cared about or supported by mainline kernels.
So, let's remove FW_FEATURE_OPALv3 and instead use FW_FEATURE_OPAL
exclusively.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
OPALv2 only ever existed in the lab and didn't escape to the world.
All OPAL systems in the wild are OPALv3.
The probability of there being an OPALv2 system still powered on
anywhere inside IBM is approximately zero, let alone anyone
expecting to run mainline kernels.
So, start to remove references to OPALv2.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The OpenPower Abstraction Layer firmware went through a couple
of iterations in the lab before being released. What we now know
as OPAL advertises itself as OPALv3.
OPALv2 and OPALv1 never made it outside the lab, and the possibility
of anyone at all ever building a mainline kernel today and expecting
it to boot on such hardware is zero.
Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
GregorianDay() is supposed to calculate the day of the week
(tm->tm_wday) for a given day/month/year. In that calcuation it
indexed into an array called MonthOffset using tm->tm_mon-1. However
tm_mon is zero-based, not one-based, so this is off-by-one. It also
means that every January, GregoiranDay() will access element -1 of
the MonthOffset array.
It also doesn't appear to be a correct algorithm either: see in
contrast kernel/time/timeconv.c's time_to_tm function.
It's been broken forever, which suggests no-one in userland uses
this. It looks like no-one in the kernel uses tm->tm_wday either
(see e.g. drivers/rtc/rtc-ds1305.c:319).
tm->tm_wday is conventionally set to -1 when not available in
hardware so we can simply set it to -1 and drop the function.
(There are over a dozen other drivers in drivers/rtc that do
this.)
Found using UBSAN.
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrew Morton <akpm@linux-foundation.org> # as an example of what UBSan finds.
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: rtc-linux@googlegroups.com
Signed-off-by: Daniel Axtens <dja@axtens.net>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently if you are in xmon without an oops etc. to view the kernel
version you have to type "d $linux_banner" - not necessarily obvious. As
this is useful information, append to the output of "e" command.
Example output:
$mon> e
cpu 0x1: Vector: 0 at [c0000000f879ba80]
pc: c000000000081718: sysrq_handle_xmon+0x68/0x80
lr: c000000000081718: sysrq_handle_xmon+0x68/0x80
sp: c0000000f879bbe0
msr: 8000000000009033
current = 0xc0000000f604d5c0
paca = 0xc00000000fdc0480 softe: 0 irq_happened: 0x01
pid = 2467, comm = bash
Linux version 4.4.0-rc2-00008-gc51af91c3ab3-dirty (rashmica@circle) (gcc
version 5.1.1 20150629 (GCC) ) #45 SMP Wed Nov 25 10:25:12 AEDT 2015
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
All users of QPACE have upgraded to QPACE2 so remove the Cell QPACE code.
Signed-off-by: Rashmica Gupta <rashmicy@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Kernel prints respective warnings about various EPOW events for
user information/action after parsing EPOW interrupts. At times
below EPOW reset event warning is seen to be flooding kernel log
over a period of time.
May 25 03:46:34 alp kernel: Non critical power or cooling issue cleared
May 25 03:46:52 alp kernel: Non critical power or cooling issue cleared
May 25 03:53:48 alp kernel: Non critical power or cooling issue cleared
May 25 03:55:46 alp kernel: Non critical power or cooling issue cleared
May 25 03:56:34 alp kernel: Non critical power or cooling issue cleared
May 25 03:59:04 alp kernel: Non critical power or cooling issue cleared
May 25 04:02:01 alp kernel: Non critical power or cooling issue cleared
These EPOW reset events are spurious in nature and are triggered by
firmware without an actual EPOW event being reset. This patch avoids these
multiple EPOW reset warnings by using a counter variable. This variable
is incremented every time an EPOW event is reported. Upon receiving a EPOW
reset event the same variable is checked to filter out spurious events and
decremented accordingly.
This patch also improves log messages to better describe EPOW event being
reported. Merged adjacent log messages into single one to reduce number of
lines printed per event.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Vipin K Parashar <vipin@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- tm: Block signal return from setting invalid MSR state from Michael Neuling
- tm: Check for already reclaimed tasks from Michael Neuling
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=IL8A
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.4-3' into next
Merge the two TM fixes we merged in 4.4. We are about to merge selftests
for these, and without the fixes the selftests will oops.
powerpc fixes for 4.4 #2
- tm: Block signal return from setting invalid MSR state from Michael Neuling
- tm: Check for already reclaimed tasks from Michael Neuling
Print MSR TM bits in oops messages. This appends them to the end
like this:
MSR: 8000000502823031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[TE]>
You get the TM[] only if at least one TM MSR bit is set. Inside the
TM[], E means Enabled (bit 32), S means Suspended (bit 33), and T
means Transactional (bit 34)
If no bits are set, you get no TM[] output.
Include rework of printbits() to handle this case.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
According to memory-barriers.txt, xchg*, cmpxchg* and their atomic_
versions all need to be fully ordered, however they are now just
RELEASE+ACQUIRE, which are not fully ordered.
So also replace PPC_RELEASE_BARRIER and PPC_ACQUIRE_BARRIER with
PPC_ATOMIC_ENTRY_BARRIER and PPC_ATOMIC_EXIT_BARRIER in
__{cmp,}xchg_{u32,u64} respectively to guarantee fully ordered semantics
of atomic{,64}_{cmp,}xchg() and {cmp,}xchg(), as a complement of commit
b97021f855 ("powerpc: Fix atomic_xxx_return barrier semantics")
This patch depends on patch "powerpc: Make value-returning atomics fully
ordered" for PPC_ATOMIC_ENTRY_BARRIER definition.
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
According to memory-barriers.txt:
> Any atomic operation that modifies some state in memory and returns
> information about the state (old or new) implies an SMP-conditional
> general memory barrier (smp_mb()) on each side of the actual
> operation ...
Which mean these operations should be fully ordered. However on PPC,
PPC_ATOMIC_ENTRY_BARRIER is the barrier before the actual operation,
which is currently "lwsync" if SMP=y. The leading "lwsync" can not
guarantee fully ordered atomics, according to Paul Mckenney:
https://lkml.org/lkml/2015/10/14/970
To fix this, we define PPC_ATOMIC_ENTRY_BARRIER as "sync" to guarantee
the fully-ordered semantics.
This also makes futex atomics fully ordered, which can avoid possible
memory ordering problems if userspace code relies on futex system call
for fully ordered semantics.
Fixes: b97021f855 ("powerpc: Fix atomic_xxx_return barrier semantics")
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The slot information of base page size hash pte is stored in the
pgtable_t w.r.t transparent hugepage. We need to make sure we don't
index beyond pgtable_t size.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This will bulk read 4 hash pte slot entries and should reduce the loop
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Remove the related functions and #defines
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
They don't need to track 4k subpage slot details and hence don't need
second half of pgtable_t.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Use the #define instead of open-coding the same
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pte and pmd table size are dependent on config items. Don't
hard code the same. This make sure we use the right value
when masking pmd entries and also while checking pmd_bad
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For a pte entry we will have _PAGE_PTE set. Our pte page
address have a minimum alignment requirement of HUGEPD_SHIFT_MASK + 1.
We use the lower 7 bits to indicate hugepd. ie.
For pmd and pgd we can find:
1) _PAGE_PTE set pte -> indicate PTE
2) bits [2..6] non zero -> indicate hugepd.
They also encode the size. We skip bit 1 (_PAGE_PRESENT).
3) othewise pointer to next table.
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We support THP only with book3s_64 and 64K page size. Move
THP details to hash64-64k.h to clarify the same.
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
W.r.t hugetlb, we support two format for pmd. With book3s_64 and
64K linux page size, we can have pte at the pmd level. Hence we
don't need to support hugepd there. For everything else hugepd
is supported and pmd_huge is (0).
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Only difference here is, we apply the WIMG mapping early, so rflags
passed to updatepp will also be changed.
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Instead of open coding it in multiple code paths, export the helper
and add more documentation. Also make sure we don't make assumption
regarding pte bit position
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is similar to 64K insert. May be we want to consolidate
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Convert from asm to C
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
No real change, only style changes
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This free up 11 bits in pte_t. In the later patch we also change
the pte_t format so that we can start supporting migration pte
at pmd level. We now track 4k subpage valid bit as below
If we have _PAGE_COMBO set, we override the _PAGE_F_GIX_SHIFT
and _PAGE_F_SECOND. Together we have 4 bits, each of them
used to indicate whether any of the 4 4k subpage in that group
is valid. ie,
[ group 1 bit ] [ group 2 bit ] ..... [ group 4 ]
[ subpage 1 - 4] [ subpage 5- 8] ..... [ subpage 13 - 16]
We still track each 4k subpage slot number and secondary hash
information in the second half of pgtable_t. Removing the subpage
tracking have some significant overhead on aim9 and ebizzy benchmark and
to support THP with 4K subpage, we do need a pgtable_t of 4096 bytes.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We should not expect pte bit position in asm code. Simply
by moving part of that to C
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Move the booke related headers below booke/32 or booke/64
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
functions which operate on pte bits are moved to hash*.h and other
generic functions are moved to pgtable.h
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This enables us to keep hash64 related bits together, and makes it easy
to follow.
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We convert them static inline function here as we did with pte_val in
the previous patch
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We also convert few #define to static inline in this patch for better
type checking
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We copy only needed PTE bits define from pte-common.h to respective
hash related header. This should greatly simply later patches in which
we are going to change the pte format for hash config
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We are going to drop pte_common.h in the later patch. The idea is to
enable hash code not require to define all PTE bits. Having PTE bits
defined in pte_common.h made the code unnecessarily complex.
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We also move __ASSEMBLY__ towards the end of header. This avoid
having #ifndef __ASSEMBLY___ all over the header
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This further make a copy of pte defines to book3s/64/hash*.h. This
remove the dependency on pgtable-ppc64-4k.h and pgtable-ppc64-64k.h
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In this patch we do:
cp pgtable-ppc32.h book3s/32/pgtable.h
cp pgtable-ppc64.h book3s/64/pgtable.h
This enable us to do further changes to hash specific config.
We will change the page table format for 64bit hash in later patches.
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is the same bug we fixed as part of 09567e7fd4
("powerpc/mm: Check paca psize is up to date for huge mappings"). Please
check that for details. The difference here is that faults were
happening on a 4K page at an address previously mapped by hugetlb.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Two DSCR tests have a hack in them:
/*
* XXX: Force a context switch out so that DSCR
* current value is copied into the thread struct
* which is required for the child to inherit the
* changed value.
*/
sleep(1);
We should not be working around this in the testcase, it is a kernel bug.
Fix it by copying the current DSCR to the child, instead of what we
had in the thread struct at last context switch.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
