Although 'err' has been initialized to -ENOMEM, but it will be reassigned
by the "err = unwind__prepare_access(...)" statement in the for loop. So
that, the value of 'err' is unknown when map__clone() failed.
Fixes: 6c50258443 ("perf unwind: Call unwind__prepare_access for forked thread")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhen lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210415092744.3793-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In the function auxtrace_parse_snapshot_options(), the callback pointer
"itr->parse_snapshot_options" can be NULL if it has not been set during
the AUX record initialization. This can cause tool crashing if the
callback pointer "itr->parse_snapshot_options" is dereferenced without
performing NULL check.
Add a NULL check for the pointer "itr->parse_snapshot_options" before
invoke the callback.
Fixes: d20031bb63 ("perf tools: Add AUX area tracing Snapshot Mode")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: http://lore.kernel.org/lkml/20210420151554.2031768-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although 'ret' has been initialized to -1, but it will be reassigned by
the "ret = open(...)" statement in the for loop. So that, the value of
'ret' is unknown when asprintf() failed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210415083417.3740-1-thunder.leizhen@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SPE extended headers are > 1 byte so ensure the buffer contains at least
this before reading. This issue was detected by fuzzing.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210407153955.317215-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
#11 0x559bce519bea in perf_session__process_events util/session.c:2297
#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
#9 0x559bce519bea in perf_session__process_events util/session.c:2297
#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After installing the libelf-dev package and compiling perf, if we have
kptr_restrict=2 and perf_event_paranoid=3 'perf top' will crash because
the value of /proc/kallsyms cannot be obtained, which leads to
info->jited_ksyms == NULL. In order to solve this problem, Add a
check before use.
Also plug some leaks on the error path.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: jackie liu <liuyun01@kylinos.cn>
Link: http://lore.kernel.org/lkml/20210316012453.1156-1-liuyun01@kylinos.cn
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A raw PMU event (eventsel+umask) in the form of rNNN is supported
by perf but lacks of checking for the validity of raw encoding.
For example, bit 16 and bit 17 are not valid on KBL but perf doesn't
report warning when encoding with these bits.
Before:
# ./perf stat -e cpu/r031234/ -a -- sleep 1
Performance counter stats for 'system wide':
0 cpu/r031234/
1.003798924 seconds time elapsed
It may silently measure the wrong event!
The kernel supported bits have been exported through
/sys/devices/<pmu>/format/. Perf collects the information to
'struct perf_pmu_format' and links it to 'pmu->format' list.
The 'struct perf_pmu_format' has a bitmap which records the
valid bits for this format. For example,
root@kbl-ppc:/sys/devices/cpu/format# cat umask
config:8-15
The valid bits (bit8-bit15) are recorded in bitmap of format 'umask'.
We collect total valid bits of all formats, save to a local variable
'masks' and reverse it. Now '~masks' represents total invalid bits.
bits = config & ~masks;
The set bits in 'bits' indicate the invalid bits used in config.
Finally we use bitmap_scnprintf to report the invalid bits.
Some architectures may not export supported bits through sysfs,
so if masks is 0, perf_pmu__warn_invalid_config directly returns.
After:
Single event without name:
# ./perf stat -e cpu/r031234/ -a -- sleep 1
WARNING: event 'N/A' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 cpu/r031234/
1.001597373 seconds time elapsed
Multiple events with names:
# ./perf stat -e cpu/rf01234,name=aaa/,cpu/r031234,name=bbb/ -a -- sleep 1
WARNING: event 'aaa' not valid (bits 20,22 of config 'f01234' not supported by kernel)!
WARNING: event 'bbb' not valid (bits 16-17 of config '31234' not supported by kernel)!
Performance counter stats for 'system wide':
0 aaa
0 bbb
1.001573787 seconds time elapsed
Warnings are reported for invalid bits.
Co-developed-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210310051138.12154-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Account for alignment bytes in the zero-ing memset.
Fixes: 1a853e3687 ("perf record: Allow specifying a pid to record")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210309234945.419254-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf build fails on 5.12.0rc2 on s390 with this error message:
util/synthetic-events.c: In function
‘__event__synthesize_thread.part.0.isra’:
util/synthetic-events.c:787:19: error: ‘kernel_thread’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
787 | if (_pid == pid && !kernel_thread) {
| ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~
The build succeeds using command 'make DEBUG=y'.
The variable kernel_thread is set by this function sequence:
__event__synthesize_thread()
| defines bool kernel_thread; as local variable and calls
+--> perf_event__prepare_comm(..., &kernel_thread)
+--> perf_event__get_comm_ids(..., bool *kernel);
On return of this function variable kernel is always
set to true or false.
To prevent this compile error, assign variable kernel_thread
a value when it is defined.
Output after:
[root@m35lp76 perf]# make util/synthetic-events.o
....
CC util/synthetic-events.o
[root@m35lp76 perf]#
Fixes: c1b907953b ("perf tools: Skip PERF_RECORD_MMAP event synthesis for kernel threads")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210309110447.834292-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only requirement of an auxtrace queue is that the buffers are in
time order. That is achieved by making separate queues for separate
perf buffer or AUX area buffer mmaps.
That generally means a separate queue per cpu for per-cpu contexts, and
a separate queue per thread for per-task contexts.
When buffers are added to a queue, perf checks that the buffer cpu and
thread id (tid) match the queue cpu and thread id.
However, generally, that need not be true, and perf will queue buffers
correctly anyway, so the check is not needed.
In addition, the check gets erroneously hit when using sample mode to
trace multiple threads.
Consequently, fix that case by removing the check.
Fixes: e502789302 ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210308151143.18338-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Noticed on a debian:experimental mips and mipsel cross build build
environment:
perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1
mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224
perfbuilder@ec265a086e9b:~$
CC /tmp/build/perf/util/map.o
util/map.c: In function 'map__new':
util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=]
109 | "%s/platforms/%s/arch-%s/usr/lib/%s",
| ^~
In file included from /usr/mips-linux-gnu/include/stdio.h:867,
from util/symbol.h:11,
from util/map.c:2:
/usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096
67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
68 | __bos (__s), __fmt, __va_arg_pack ());
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Since we have the lenghts for what lands in that place, use it to give
the compiler more info and make it happy.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf report fails to add valid additional fields with -F when
used with branch or mem modes. Fix it.
Before patch:
$ perf record -b
$ perf report -b -F +srcline_from --stdio
Error:
Invalid --fields key: `srcline_from'
After patch:
$ perf report -b -F +srcline_from --stdio
# Samples: 8K of event 'cycles'
# Event count (approx.): 8784
...
Committer notes:
There was an inversion: when looking at branch stack dimensions (keys)
it was checking if the sort mode was 'mem', not 'branch'.
Fixes: aa6b3c9923 ("perf report: Make -F more strict like -s")
Reported-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210304062958.85465-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I got a segfault when using -r option with event groups. The option
makes it run the workload multiple times and it will reuse the evlist
and evsel for each run.
While most of resources are allocated and freed properly, the id hash
in the evlist was not and it resulted in the bug. You can see it with
the address sanitizer like below:
$ perf stat -r 100 -e '{cycles,instructions}' true
=================================================================
==693052==ERROR: AddressSanitizer: heap-use-after-free on
address 0x6080000003d0 at pc 0x558c57732835 bp 0x7fff1526adb0 sp 0x7fff1526ada8
WRITE of size 8 at 0x6080000003d0 thread T0
#0 0x558c57732834 in hlist_add_head /home/namhyung/project/linux/tools/include/linux/list.h:644
#1 0x558c57732834 in perf_evlist__id_hash /home/namhyung/project/linux/tools/lib/perf/evlist.c:237
#2 0x558c57732834 in perf_evlist__id_add /home/namhyung/project/linux/tools/lib/perf/evlist.c:244
#3 0x558c57732834 in perf_evlist__id_add_fd /home/namhyung/project/linux/tools/lib/perf/evlist.c:285
#4 0x558c5747733e in store_evsel_ids util/evsel.c:2765
#5 0x558c5747733e in evsel__store_ids util/evsel.c:2782
#6 0x558c5730b717 in __run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:895
#7 0x558c5730b717 in run_perf_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:1014
#8 0x558c5730b717 in cmd_stat /home/namhyung/project/linux/tools/perf/builtin-stat.c:2446
#9 0x558c57427c24 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#10 0x558c572b1a48 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#11 0x558c572b1a48 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#12 0x558c572b1a48 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#13 0x7fcadb9f7d09 in __libc_start_main ../csu/libc-start.c:308
#14 0x558c572b60f9 in _start (/home/namhyung/project/linux/tools/perf/perf+0x45d0f9)
Actually the nodes in the hash table are struct perf_stream_id and
they were freed in the previous run. Fix it by resetting the hash.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20210225035148.778569-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jin Yao reported parser error for software event:
# perf stat -e software/r1a/ -a -- sleep 1
event syntax error: 'software/r1a/'
\___ parser error
This happens after commit 8c3b1ba0e7 ("drm/i915/gt: Track the
overall awake/busy time"), where new software-gt-awake-time event's
non-pmu-event-style makes event parser conflict with software PMU.
If we allow PE_PMU_EVENT_PRE to be parsed as PMU name, we fix the
conflict and the following character '/' for PMU or '-' for
non-pmu-event-style event allows parser to decide what even is
specified.
Fixes: 8c3b1ba0e7 ("drm/i915/gt: Track the overall awake/busy time")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210301122315.63471-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The musl-libc [1] defines (struct timeval).tv_sec as a 'long long' for
arm and other architectures. The default build having a '-Wformat' flag,
not casting the field when printing prevents from building perf.
This patch casts the (struct timeval).tv_sec fields to the expected
format.
[1] git://git.musl-libc.org/musl
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Douglas.raillard@arm.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210224182410.5366-1-Pierre.Gondois@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
lsdir_bid_tail_filter() ignored any build-id that wasn't exactly 20
bytes. This worked only for SHA-1 build-ids. The build-id for a PE file
is always a 16-byte GUID and ELF files can also have MD5 or UUID
build-ids.
This fix changes the filter to allow build-ids between 16 and 20 bytes.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/597788e4-661d-633f-857c-3de700115d02@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This removes the redundant checks bfd_check_format() and
bfd_target_elf_flavour. They were previously checking different files.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: https://lore.kernel.org/r/94758ca1-0031-d7c6-6c6a-900fd77ef695@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Events record a single cpumode so the tools cannot handle a branch from
the host machine to a virtual machine, or vice versa. Split it in two so
that each branch can have a different cpumode.
E.g. host ip -> guest ip
becomes: host ip -> 0
0 -> guest ip
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the change of NR to detect whether an asynchronous branch is a VM-Exit.
Note VM-Entry is determined from the vmlaunch or vmresume instruction,
in which case, sample flags will show "VMentry" even if the VM-Entry fails.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handling TIP.PGD for an address filter for a guest kernel is the same as a
host kernel, but user space decoding, and hence address filters, are not
supported.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The guest kernel can be found from any guest thread belonging to the guest
machine. The guest machine is associated with the current host process pid.
An idle thread (pid=tid=0) is created as a vehicle from which to find the
guest kernel map.
Decoding guest user space is not supported.
Synthesized samples just need the cpumode set for the guest.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out machine__idle_thread() so it can be re-used for guest machines.
A thread is needed to find executable code, even for the guest kernel. To
avoid possible future pid number conflicts, the idle thread can be used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Factor out machines__find_guest() so it can be re-used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The PIP packet NR (non-root) flag indicates whether or not a virtual
machine is being traced (NR=1 => VM). Add support for tracking its value.
In particular note that the PIP packet (outside of PSB+) will be
associated with a TIP packet from which address the NR value takes
effect. At that point, there is a branch from_ip, to_ip with
corresponding from_nr and to_nr.
In the event of VM-Entry failure, there should still PIP and TIP packets
that can be followed in the same way.
Also note that this assumes that a host VMM is not employing VMX controls
that affect Intel PT, e.g. to hide the host from a guest using Intel PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Retain the PIP packet payload as is, instead of just the CR3, because it
contains also the VMX NR flag which is needed to track VM-Entry.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to support Intel PT decoding of virtual machine traces, add
vmlaunch and vmresume as branch instructions.
Note, sample flags will show "VMentry" even if the VM-Entry fails.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to support Intel PT decoding of virtual machine traces, add
branch types for VM-Entry and VM-Exit.
Note they are both treated as "calls" because the VM-Exit transfers control
to a different address.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
aux-output events need to have an AUX area event as the group leader.
However, grouping events does not allow the AUX area event to be given
an address filter because the --filter option must come after the event,
which conflicts with the grouping syntax.
To allow filtering in that case, automatically create a group since that
is the requirement anyway.
Example: (requires Intel Tremont)
perf record -c 500 -e 'intel_pt//u' --filter 'filter main @ /bin/ls' -e 'cycles/aux-output/pp' ls
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210121140418.14705-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For X86, the var2_w field of PERF_SAMPLE_WEIGHT_STRUCT stands for the
instruction latency. Current perf forces the var2_w to the data->ins_lat
in the generic code. It works well for now because X86 is the only
architecture that supports the PERF_SAMPLE_WEIGHT_STRUCT, but it may
bring problems once other architectures support the sample type. For
example, the var2_w may be used to capture something else on PowerPC.
Create two architecture specific functions to parse and synthesize the
weight related samples. Move the X86 specific codes to the X86 version
functions. Other architectures can implement their own functions later
separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/1612540912-6562-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code assumed every CYC-eligible packet has a CYC packet, which is not
the case when CYC thresholds are used. Fix by checking if a CYC packet is
actually present in that case.
Fixes: 5b1dc0fd1d ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code assumed a change in cycle count means accurate IPC. That is not
correct, for example when sampling both branches and instructions, or at
a FUP packet (which is not CYC-eligible) address. Fix by using an explicit
flag to indicate when IPC can be sampled.
Fixes: 5b1dc0fd1d ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20210205175350.23817-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing CYC packet processing when walking through PSB+. This
improves the accuracy of timestamps that follow PSB+, until the next
MTC.
Fixes: 3d49807870 ("perf tools: Add new Intel PT packet definitions")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When locating the DWARF module for a given address, __find_debuginfo()
requires a 'struct dso' passed via the userdata argument.
However, this field is only set in __report_module() if the module is
found in via dwfl_addrmodule(), not if it is found later via
dwfl_report_elf().
Set userdata irrespective of how the DWARF module was found, as long as
we found a module.
Fixes: bf53fc6b5f ("perf unwind: Fix separate debug info files when using elfutils' libdw's unwinder")
Signed-off-by: Dave Rigby <d.rigby@me.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211801
Acked-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/linux-perf-users/20210218165654.36604-1-d.rigby@me.com/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit da231338ec ("perf record: Use an eventfd to wakeup when
done") uses eventfd() to solve a rare race where the setting and
checking of 'done' which add done_fd to pollfd. When draining buffer,
revents of done_fd is 0 and evlist__filter_pollfd function returns a
non-zero value. As a result, perf record does not stop profiling.
The following simple scenarios can trigger this condition:
# sleep 10 &
# perf record -p $!
After the sleep process exits, perf record should stop profiling and exit.
However, perf record keeps running.
If pollfd revents contains only POLLERR or POLLHUP, perf record
indicates that buffer is draining and need to stop profiling. Use
fdarray_flag__nonfilterable() to set done eventfd to nonfilterable
objects, so that evlist__filter_pollfd() does not filter and check done
eventfd.
Fixes: da231338ec ("perf record: Use an eventfd to wakeup when done")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhangjinhao2@huawei.com
Link: http://lore.kernel.org/lkml/20210205065001.23252-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix the following coccicheck warnings:
./tools/perf/util/header.c:3809:18-20: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/1612497255-87189-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Eliminate the following coccicheck warning:
./tools/perf/util/metricgroup.c:382:3-4: Unneeded semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: yang li <yang.lee@linux.alibaba.com>
Link: http://lore.kernel.org/lkml/1612165277-95878-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Detect symbols generated by the OCaml compiler based on their prefix.
Demangle OCaml symbols, returning a newly allocated string (like the
existing Java demangling functionality).
Move a helper function (hex) from tests/code-reading.c to util/string.c
To test:
echo 'Printf.printf "%d\n" (Random.int 42)' > test.ml
perf record ocamlopt.opt test.ml
perf report -d ocamlopt.opt
Signed-off-by: Fabian Hemmer <copy@copy.sh>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LPU-Reference: 20210203211537.b25ytjb6dq5jfbwx@nyu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With LTO, there are symbols like these:
/usr/lib/debug/usr/lib64/libantlr4-runtime.so.4.8-4.8-1.4.x86_64.debug
10305: 0000000000955fa4 0 NOTYPE LOCAL DEFAULT 29 Predicate.cpp.2bc410e7
This comes from a runtime/debug split done by the standard way:
objcopy --only-keep-debug $runtime $debug
objcopy --add-gnu-debuglink=$debugfn -R .comment -R .GCC.command.line --strip-all $runtime
perf currently cannot resolve such symbols (relicts of LTO), as section
29 exists only in the debug file (29 is .debug_info). And perf resolves
symbols only against runtime file. This results in all symbols from such
a library being unresolved:
0.38% main2 libantlr4-runtime.so.4.8 [.] 0x00000000000671e0
So try resolving against the debug file first. And only if it fails (the
section has NOBITS set), try runtime file. We can do this, as "objcopy
--only-keep-debug" per documentation preserves all sections, but clears
data of some of them (the runtime ones) and marks them as NOBITS.
The correct result is now:
0.38% main2 libantlr4-runtime.so.4.8 [.] antlr4::IntStream::~IntStream
Note that these LTO symbols are properly skipped anyway as they belong
neither to *text* nor to *data* (is_label && !elf_sec__filter(&shdr,
secstrs) is true).
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210217122125.26416-1-jslaby@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sample structure contains the field 'data_src' which is used to
tell the data operation attributions, e.g. operation type is loading or
storing, cache level, it's snooping or remote accessing, etc. At the
end, the 'data_src' will be parsed by perf mem/c2c tools to display
human readable strings.
This patch is to fill the 'data_src' field in the synthesized samples
base on different types. Currently perf tool can display statistics for
L1/L2/L3 caches but it doesn't support the 'last level cache'. To fit
to current implementation, 'data_src' field uses L3 cache for last level
cache.
Before this commit, perf mem report looks like this:
# Samples: 75K of event 'l1d-miss'
# Total weight : 75951
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access
# ........ ....... ............ ............. ...................... ............. ...................... ........... ..... ..........
#
81.56% 61945 0 N/A [.] 0x00000000000009d8 serial_c [.] 0000000000000000 [unknown] N/A N/A
18.44% 14003 0 N/A [.] 0x0000000000000828 serial_c [.] 0000000000000000 [unknown] N/A N/A
Now on a system with Arm SPE, addresses and access types are displayed:
# Samples: 75K of event 'l1d-miss'
# Total weight : 75951
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access
# ........ ....... ............ ............. ...................... ............. ...................... ........... ..... ..........
#
0.43% 324 0 L1 miss [.] 0x00000000000009d8 serial_c [.] 0x0000ffff80794e00 anon N/A Walker hit
0.42% 322 0 L1 miss [.] 0x00000000000009d8 serial_c [.] 0x0000ffff80794580 anon N/A Walker hit
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-6-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The memory event can deliver two benefits:
- The first benefit is the memory event can give out global view for
memory accessing, rather than organizing events with scatter mode
(e.g. uses separate event for L1 cache, last level cache, etc) which
which can only display a event for single memory type, memory events
include all memory accessing so it can display the data accessing
cross memory levels in the same view;
- The second benefit is the sample generation might introduce a big
overhead and need to wait for long time for Perf reporting, we can
specify itrace option '--itrace=M' to filter out other events and only
output memory events, this can significantly reduce the overhead
caused by generating samples.
This patch is to enable memory event for Arm SPE.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-5-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To properly handle memory and branch samples, this patch divides into
two functions for generating samples: arm_spe__synth_mem_sample() is for
synthesizing memory and TLB samples; arm_spe__synth_branch_sample() is
to synthesize branch samples.
Arm SPE backend decoder has passed virtual and physical address through
packets, the address info is stored into the synthesize samples in the
function arm_spe__synth_mem_sample().
Committer notes:
Fixed this:
36 46.77 fedora:27 : FAIL clang version 5.0.2 (tags/RELEASE_502/final)
util/arm-spe.c:269:34: error: missing field 'pid' initializer [-Werror,-Wmissing-field-initializers]
struct perf_sample sample = { 0 };
^
util/arm-spe.c:288:34: error: missing field 'pid' initializer [-Werror,-Wmissing-field-initializers]
struct perf_sample sample = { 0 };
By using = { .ip = 0, };
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <al.grant@arm.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20210211133856.2137-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf failed to add a kretprobe event with debuginfo of vmlinux which is
compiled by gcc with -fpatchable-function-entry option enabled. The
same issue with kernel module.
Issue:
# perf probe -v 'kernel_clone%return $retval'
......
Writing event: r:probe/kernel_clone__return _text+599624 $retval
Failed to write event: Invalid argument
Error: Failed to add events. Reason: Invalid argument (Code: -22)
# cat /sys/kernel/debug/tracing/error_log
[156.75] trace_kprobe: error: Retprobe address must be an function entry
Command: r:probe/kernel_clone__return _text+599624 $retval
^
# llvm-dwarfdump vmlinux |grep -A 10 -w 0x00df2c2b
0x00df2c2b: DW_TAG_subprogram
DW_AT_external (true)
DW_AT_name ("kernel_clone")
DW_AT_decl_file ("/home/code/linux-next/kernel/fork.c")
DW_AT_decl_line (2423)
DW_AT_decl_column (0x07)
DW_AT_prototyped (true)
DW_AT_type (0x00dcd492 "pid_t")
DW_AT_low_pc (0xffff800010092648)
DW_AT_high_pc (0xffff800010092b9c)
DW_AT_frame_base (DW_OP_call_frame_cfa)
# cat /proc/kallsyms |grep kernel_clone
ffff800010092640 T kernel_clone
# readelf -s vmlinux |grep -i kernel_clone
183173: ffff800010092640 1372 FUNC GLOBAL DEFAULT 2 kernel_clone
# objdump -d vmlinux |grep -A 10 -w \<kernel_clone\>:
ffff800010092640 <kernel_clone>:
ffff800010092640: d503201f nop
ffff800010092644: d503201f nop
ffff800010092648: d503233f paciasp
ffff80001009264c: a9b87bfd stp x29, x30, [sp, #-128]!
ffff800010092650: 910003fd mov x29, sp
ffff800010092654: a90153f3 stp x19, x20, [sp, #16]
The entry address of kernel_clone converted by debuginfo is _text+599624
(0x92648), which is consistent with the value of DW_AT_low_pc attribute.
But the symbolic address of kernel_clone from /proc/kallsyms is
ffff800010092640.
This issue is found on arm64, -fpatchable-function-entry=2 is enabled when
CONFIG_DYNAMIC_FTRACE_WITH_REGS=y;
Just as objdump displayed the assembler contents of kernel_clone,
GCC generate 2 NOPs at the beginning of each function.
kprobe_on_func_entry detects that (_text+599624) is not the entry address
of the function, which leads to the failure of adding kretprobe event.
kprobe_on_func_entry
->_kprobe_addr
->kallsyms_lookup_size_offset
->arch_kprobe_on_func_entry // FALSE
The cause of the issue is that the first instruction in the compile unit
indicated by DW_AT_low_pc does not include NOPs.
This issue exists in all gcc versions that support
-fpatchable-function-entry option.
I have reported it to the GCC community:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98776
Currently arm64 and PA-RISC may enable fpatchable-function-entry option.
The kernel compiled with clang does not have this issue.
FIX:
This GCC issue only cause the registration failure of the kretprobe event
which doesn't need debuginfo. So, stop using debuginfo for retprobe.
map will be used to query the probe function address.
Signed-off-by: Jianlin Lv <Jianlin.Lv@arm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: clang-built-linux@googlegroups.com
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210210062646.2377995-1-Jianlin.Lv@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The first time dso__load() was called on a PE file it always returned -1
error. This caused the first call to map__find_symbol() to always fail
on a PE file so the first sample from each PE file always had symbol
<unknown>. Subsequent samples succeed however because the DSO is already
loaded.
This fixes dso__load() to return 0 when successfully loading a DSO with
libbfd.
Fixes: eac9a4342e ("perf symbols: Try reading the symbol table with libbfd")
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/1671b43b-09c3-1911-dbf8-7f030242fbf7@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
dso__load_bfd_symbols() attempts to load a DSO at its original path,
then closes it and loads the file in the debug cache. This is incorrect.
It should ignore the original file and work with only the debug cache.
The original file may have changed or may not even exist, for example if
the debug cache has been transferred to another machine via "perf
archive".
This fix makes it only load the file in the debug cache.
Further notes from Nicholas:
dso__load_bfd_symbols() is called in a loop from dso__load() for a variety
of paths. These are generated by the various DSO_BINARY_TYPEs in the
binary_type_symtab list at the top of util/symbol.c. In each case the
debugfile passed to dso__load_bfd_symbols() is the path to try.
One of those iterations (the first one I believe) passes the original path
as the debugfile. If the file still exists at the original path, this is
the one that ends up being used in case the debugcache was deleted or the
PE file doesn't have a build-id.
A later iteration (BUILD_ID_CACHE) passes debugfile as the file in the
debugcache if it has a build-id. Even if the file was previously loaded at
its original path, (if I understand correctly) this load will override it
so the debugcache file ends up being used.
Committer notes:
So if it fails to find in the cache, it will eventually hope for the
best and look at the path in the local filesystem, which in many cases
is enough.
At some point we need to switch from this "hope for the best" approach
to one that warns the user that there is no guarantee, if no buildid is
present, that just by looking at the pathname the symbolisation will
work.
Signed-off-by: Nicholas Fraser <nfraser@codeweavers.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Huw Davies <huw@codeweavers.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Cc: Ulrich Czekalla <uczekalla@codeweavers.com>
Link: http://lore.kernel.org/lkml/e58e1237-94ab-e1c9-a7b9-473531906954@codeweavers.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
