A FUSE filesystem server queues /dev/fuse sys_read calls to get
filesystem requests to handle. It does not know in advance what would be
that request as it can be anything that client issues - LOOKUP, READ,
WRITE, ... Many requests are short and retrieve data from the
filesystem. However WRITE and NOTIFY_REPLY write data into filesystem.
Before getting into operation phase, FUSE filesystem server and kernel
client negotiate what should be the maximum write size the client will
ever issue. After negotiation the contract in between server/client is
that the filesystem server then should queue /dev/fuse sys_read calls with
enough buffer capacity to receive any client request - WRITE in
particular, while FUSE client should not, in particular, send WRITE
requests with > negotiated max_write payload. FUSE client in kernel and
libfuse historically reserve 4K for request header. This way the
contract is that filesystem server should queue sys_reads with
4K+max_write buffer.
If the filesystem server does not follow this contract, what can happen
is that fuse_dev_do_read will see that request size is > buffer size,
and then it will return EIO to client who issued the request but won't
indicate in any way that there is a problem to filesystem server.
This can be hard to diagnose because for some requests, e.g. for
NOTIFY_REPLY which mimics WRITE, there is no client thread that is
waiting for request completion and that EIO goes nowhere, while on
filesystem server side things look like the kernel is not replying back
after successful NOTIFY_RETRIEVE request made by the server.
We can make the problem easy to diagnose if we indicate via error return to
filesystem server when it is violating the contract. This should not
practically cause problems because if a filesystem server is using shorter
buffer, writes to it were already very likely to cause EIO, and if the
filesystem is read-only it should be too following FUSE_MIN_READ_BUFFER
minimum buffer size.
Please see [1] for context where the problem of stuck filesystem was hit
for real (because kernel client was incorrectly sending more than
max_write data with NOTIFY_REPLY; see also previous patch), how the
situation was traced and for more involving patch that did not make it
into the tree.
[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
FUSE filesystem server and kernel client negotiate during initialization
phase, what should be the maximum write size the client will ever issue.
Correspondingly the filesystem server then queues sys_read calls to read
requests with buffer capacity large enough to carry request header + that
max_write bytes. A filesystem server is free to set its max_write in
anywhere in the range between [1*page, fc->max_pages*page]. In particular
go-fuse[2] sets max_write by default as 64K, wheres default fc->max_pages
corresponds to 128K. Libfuse also allows users to configure max_write, but
by default presets it to possible maximum.
If max_write is < fc->max_pages*page, and in NOTIFY_RETRIEVE handler we
allow to retrieve more than max_write bytes, corresponding prepared
NOTIFY_REPLY will be thrown away by fuse_dev_do_read, because the
filesystem server, in full correspondence with server/client contract, will
be only queuing sys_read with ~max_write buffer capacity, and
fuse_dev_do_read throws away requests that cannot fit into server request
buffer. In turn the filesystem server could get stuck waiting indefinitely
for NOTIFY_REPLY since NOTIFY_RETRIEVE handler returned OK which is
understood by clients as that NOTIFY_REPLY was queued and will be sent
back.
Cap requested size to negotiate max_write to avoid the problem. This
aligns with the way NOTIFY_RETRIEVE handler works, which already
unconditionally caps requested retrieve size to fuse_conn->max_pages. This
way it should not hurt NOTIFY_RETRIEVE semantic if we return less data than
was originally requested.
Please see [1] for context where the problem of stuck filesystem was hit
for real, how the situation was traced and for more involving patch that
did not make it into the tree.
[1] https://marc.info/?l=linux-fsdevel&m=155057023600853&w=2
[2] https://github.com/hanwen/go-fuse
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Cc: Han-Wen Nienhuys <hanwen@google.com>
Cc: Jakob Unterwurzacher <jakobunt@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Functions, like pr_err, are a more modern variant of printing compared to
printk. They could be used to denoise sources by using needed level in
the print function name, and by automatically inserting per-driver /
function / ... print prefix as defined by pr_fmt macro. pr_* are also
said to be used in Documentation/process/coding-style.rst and more
recent code - for example overlayfs - uses them instead of printk.
Convert CUSE and FUSE to use the new pr_* functions.
CUSE output stays completely unchanged, while FUSE output is amended a
bit for "trying to steal weird page" warning - the second line now comes
also with "fuse:" prefix. I hope it is ok.
Suggested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Merge page ref overflow branch.
Jann Horn reported that he can overflow the page ref count with
sufficient memory (and a filesystem that is intentionally extremely
slow).
Admittedly it's not exactly easy. To have more than four billion
references to a page requires a minimum of 32GB of kernel memory just
for the pointers to the pages, much less any metadata to keep track of
those pointers. Jann needed a total of 140GB of memory and a specially
crafted filesystem that leaves all reads pending (in order to not ever
free the page references and just keep adding more).
Still, we have a fairly straightforward way to limit the two obvious
user-controllable sources of page references: direct-IO like page
references gotten through get_user_pages(), and the splice pipe page
duplication. So let's just do that.
* branch page-refs:
fs: prevent page refcount overflow in pipe_buf_get
mm: prevent get_user_pages() from overflowing page refcount
mm: add 'try_get_page()' helper function
mm: make page ref count overflow check tighter and more explicit
Change pipe_buf_get() to return a bool indicating whether it succeeded
in raising the refcount of the page (if the thing in the pipe is a page).
This removes another mechanism for overflowing the page refcount. All
callers converted to handle a failure.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only caller that needs fc->aborted set is fuse_conn_abort_write().
Setting fc->aborted is now racy (fuse_abort_conn() may already be in
progress or finished) but there's no reason to care.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is rather natural action after previous patches, and it just decreases
load of fc->lock.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When queue_interrupt() is called from fuse_dev_do_write(), it came from
userspace directly. Userspace may pass any request id, even the request's
we have not interrupted (or even background's request). This patch adds
sanity check to make kernel safe against that.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently, we wait on req->waitq in request_wait_answer() function only,
and it's never used for background requests. Since wake_up() is not a
light-weight macros, instead of this, it unfolds in really called function,
which makes locking operations taking some cpu cycles, let's avoid its call
for the case we definitely know it's completely useless.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We take global fiq->waitq.lock every time, when we are in this function,
but interrupted requests are just small subset of all requests. This patch
optimizes request_end() and makes it to take the lock when it's really
needed.
queue_interrupt() needs small change for that. After req is linked to
interrupt list, we do smp_mb() and check for FR_FINISHED again. In case of
FR_FINISHED bit has appeared, we remove req and leave the function:
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We should sent signal only in case of interrupt is really queued. Not a
real problem, but this makes the code clearer and intuitive.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some of the pipe_buf_release() handlers seem to assume that the pipe is
locked - in particular, anon_pipe_buf_release() accesses pipe->tmp_page
without taking any extra locks. From a glance through the callers of
pipe_buf_release(), it looks like FUSE is the only one that calls
pipe_buf_release() without having the pipe locked.
This bug should only lead to a memory leak, nothing terrible.
Fixes: dd3bb14f44 ("fuse: support splice() writing to fuse device")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In current fuse_drop_waiting() implementation it's possible that
fuse_wait_aborted() will not be woken up in the unlikely case that
fuse_abort_conn() + fuse_wait_aborted() runs in between checking
fc->connected and calling atomic_dec(&fc->num_waiting).
Do the atomic_dec_and_test() unconditionally, which also provides the
necessary barrier against reordering with the fc->connected check.
The explicit smp_mb() in fuse_wait_aborted() is not actually needed, since
the spin_unlock() in fuse_abort_conn() provides the necessary RELEASE
barrier after resetting fc->connected. However, this is not a performance
sensitive path, and adding the explicit barrier makes it easier to
document.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: b8f95e5d13 ("fuse: umount should wait for all requests")
Cc: <stable@vger.kernel.org> #v4.19
fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted). Don't leak request reference in this
case. Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.
Fixes: 2d45ba381a ("fuse: add retrieve request")
Fixes: b8f95e5d13 ("fuse: umount should wait for all requests")
Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> #v2.6.36
Writeback caching currently allocates requests with the maximum number of
possible pages, while the actual number of pages per request depends on a
couple of factors that cannot be determined when the request is allocated
(whether page is already under writeback, whether page is contiguous with
previous pages already added to a request).
This patch allows such requests to start with no page allocation (all pages
inline) and grow the page array on demand.
If the max_pages tunable remains the default value, then this will mean
just one allocation that is the same size as before. If the tunable is
larger, then this adds at most 3 additional memory allocations (which is
generously compensated by the improved performance from the larger
request).
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Replace FUSE_MAX_PAGES_PER_REQ with the configurable parameter max_pages to
improve performance.
Old RFC with detailed description of the problem and many fixes by Mitsuo
Hayasaka (mitsuo.hayasaka.hu@hitachi.com):
- https://lkml.org/lkml/2012/7/5/136
We've encountered performance degradation and fixed it on a big and complex
virtual environment.
Environment to reproduce degradation and improvement:
1. Add lag to user mode FUSE
Add nanosleep(&(struct timespec){ 0, 1000 }, NULL); to xmp_write_buf in
passthrough_fh.c
2. patch UM fuse with configurable max_pages parameter. The patch will be
provided latter.
3. run test script and perform test on tmpfs
fuse_test()
{
cd /tmp
mkdir -p fusemnt
passthrough_fh -o max_pages=$1 /tmp/fusemnt
grep fuse /proc/self/mounts
dd conv=fdatasync oflag=dsync if=/dev/zero of=fusemnt/tmp/tmp \
count=1K bs=1M 2>&1 | grep -v records
rm fusemnt/tmp/tmp
killall passthrough_fh
}
Test results:
passthrough_fh /tmp/fusemnt fuse.passthrough_fh \
rw,nosuid,nodev,relatime,user_id=0,group_id=0 0 0
1073741824 bytes (1.1 GB) copied, 1.73867 s, 618 MB/s
passthrough_fh /tmp/fusemnt fuse.passthrough_fh \
rw,nosuid,nodev,relatime,user_id=0,group_id=0,max_pages=256 0 0
1073741824 bytes (1.1 GB) copied, 1.15643 s, 928 MB/s
Obviously with bigger lag the difference between 'before' and 'after'
will be more significant.
Mitsuo Hayasaka, in 2012 (https://lkml.org/lkml/2012/7/5/136),
observed improvement from 400-550 to 520-740.
Signed-off-by: Constantine Shulyupin <const@MakeLinux.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When allocating page array for a request the array for the page pointers
and the array for page descriptors are allocated by two separate kmalloc()
calls. Merge these into one allocation.
Also instead of initializing the request and the page arrays with memset(),
use the zeroing allocation variants.
Reserved requests never carry pages (page array size is zero). Make that
explicit by initializing the page array pointers to NULL and make sure the
assumption remains true by adding a WARN_ON().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We noticed the performance bottleneck in FUSE running our Virtuozzo storage
over rdma. On some types of workload we observe 20% of times spent in
request_find() in profiler. This function is iterating over long requests
list, and it scales bad.
The patch introduces hash table to reduce the number of iterations, we do
in this function. Hash generating algorithm is taken from hash_add()
function, while 256 lines table is used to store pending requests. This
fixes problem and improves the performance.
Reported-by: Alexey Kuznetsov <kuznet@virtuozzo.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This field is not needed after the previous patch, since we can easily
convert request ID to interrupt request ID and vice versa.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Using of two unconnected IDs req->in.h.unique and req->intr_unique does not
allow to link requests to a hash table. We need can't use none of them as a
key to calculate hash.
This patch changes the algorithm of allocation of IDs for a request. Plain
requests obtain even ID, while interrupt requests are encoded in the low
bit. So, in next patches we will be able to use the rest of ID bits to
calculate hash, and the hash will be the same for plain and interrupt
requests.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently, we take fc->lock there only to check for fc->connected.
But this flag is changed only on connection abort, which is very
rare operation.
So allow checking fc->connected under just fc->bg_lock and use this lock
(as well as fc->lock) when resetting fc->connected.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
To reduce contention of fc->lock, this patch introduces bg_lock for
protection of fields related to background queue. These are:
max_background, congestion_threshold, num_background, active_background,
bg_queue and blocked.
This allows next patch to make async reads not requiring fc->lock, so async
reads and writes will have better performance executed in parallel.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This cleanup patch makes the function to use the primitive
instead of direct dereferencing.
Also, move fiq dereferencing out of cycle, since it's
always constant.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Using waitqueue_active() is racy. Make sure we issue a wake_up()
unconditionally after storing into fc->blocked. After that it's okay to
optimize with waitqueue_active() since the first wake up provides the
necessary barrier for all waiters, not the just the woken one.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 3c18ef8117 ("fuse: optimize wake_up")
Cc: <stable@vger.kernel.org> # v3.10
Otherwise fuse_dev_do_write() could come in and finish off the request, and
the set_bit(FR_SENT, ...) could trigger the WARN_ON(test_bit(FR_SENT, ...))
in request_end().
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: syzbot+ef054c4d3f64cd7f7cec@syzkaller.appspotmai
Fixes: 46c34a348b ("fuse: no fc->lock for pqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
The 'bufs' array contains 'pipe->buffers' elements, but the
fuse_dev_splice_write() uses only 'pipe->nrbufs' elements.
So reduce the allocation size to 'pipe->nrbufs' elements.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The amount of pipe->buffers is basically controlled by userspace by
fcntl(... F_SETPIPE_SZ ...) so it could be large. High order allocations
could be slow (if memory is heavily fragmented) or may fail if the order
is larger than PAGE_ALLOC_COSTLY_ORDER.
Since the 'bufs' doesn't need to be physically contiguous, use
the kvmalloc_array() to allocate memory. If high order
page isn't available, the kvamalloc*() will fallback to 0-order.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_dev_splice_write() reads pipe->buffers to determine the size of
'bufs' array before taking the pipe_lock(). This is not safe as
another thread might change the 'pipe->buffers' between the allocation
and taking the pipe_lock(). So we end up with too small 'bufs' array.
Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this.
Fixes: dd3bb14f44 ("fuse: support splice() writing to fuse device")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_abort_conn() does not guarantee that all async requests have actually
finished aborting (i.e. their ->end() function is called). This could
actually result in still used inodes after umount.
Add a helper to wait until all requests are fully done. This is done by
looking at the "num_waiting" counter. When this counter drops to zero, we
can be sure that no more requests are outstanding.
Fixes: 0d8e84b043 ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_dev_release() assumes that it's the only one referencing the
fpq->processing list, but that's not true, since fuse_abort_conn() can be
doing the same without any serialization between the two.
Fixes: c3696046be ("fuse: separate pqueue for clones")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Refcounting of request is broken when fuse_abort_conn() is called and
request is on the fpq->io list:
- ref is taken too late
- then it is not dropped
Fixes: 0d8e84b043 ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
If a connection gets aborted while congested, FUSE can leave
nr_wb_congested[] stuck until reboot causing wait_iff_congested() to
wait spuriously which can lead to severe performance degradation.
The leak is caused by gating congestion state clearing with
fc->connected test in request_end(). This was added way back in 2009
by 26c3679101 ("fuse: destroy bdi on umount"). While the commit
description doesn't explain why the test was added, it most likely was
to avoid dereferencing bdi after it got destroyed.
Since then, bdi lifetime rules have changed many times and now we're
always guaranteed to have access to the bdi while the superblock is
alive (fc->sb).
Drop fc->connected conditional to avoid leaking congestion states.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Joshua Miller <joshmiller@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: stable@vger.kernel.org # v2.6.29+
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In order to support mounts from namespaces other than init_user_ns, fuse
must translate uids and gids to/from the userns of the process servicing
requests on /dev/fuse. This patch does that, with a couple of restrictions
on the namespace:
- The userns for the fuse connection is fixed to the namespace
from which /dev/fuse is opened.
- The namespace must be the same as s_user_ns.
These restrictions simplify the implementation by avoiding the need to pass
around userns references and by allowing fuse to rely on the checks in
setattr_prepare for ownership changes. Either restriction could be relaxed
in the future if needed.
For cuse the userns used is the opener of /dev/cuse. Semantically the cuse
support does not appear safe for unprivileged users. Practically the
permissions on /dev/cuse only make it accessible to the global root user.
If something slips through the cracks in a user namespace the only users
who will be able to use the cuse device are those users mapped into the
user namespace.
Translation in the posix acl is updated to use the uuser namespace of the
filesystem. Avoiding cases which might bypass this translation is handled
in a following change.
This change is stronlgy based on a similar change from Seth Forshee and
Dongsu Park.
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Upon a cursory examinination the uid and gid of a fuse request are
necessary for correct operation. Failing a fuse request where those
values are not reliable seems a straight forward and reliable means of
ensuring that fuse requests with bad data are not sent or processed.
In most cases the vfs will avoid actions it suspects will cause
an inode write back of an inode with an invalid uid or gid. But that does
not map precisely to what fuse is doing, so test for this and solve
this at the fuse level as well.
Performing this work in fuse_req_init_context is cheap as the code is
already performing the translation here and only needs to check the
result of the translation to see if things are not representable in
a form the fuse server can handle.
[SzM] Don't zero the context for the nofail case, just keep using the
munging version (makes sense for debugging and doesn't hurt).
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
At the point of fuse_dev_do_read the user space process that initiated the
action on the fuse filesystem may no longer exist. The process have been
killed or may have fired an asynchronous request and exited.
If the initial process has exited, the code "pid_vnr(find_pid_ns(in->h.pid,
fc->pid_ns)" will either return a pid of 0, or in the unlikely event that
the pid has been reallocated it can return practically any pid. Any pid is
possible as the pid allocator allocates pid numbers in different pid
namespaces independently.
The only way to make translation in fuse_dev_do_read reliable is to call
get_pid in fuse_req_init_context, and pid_vnr followed by put_pid in
fuse_dev_do_read. That reference counting in other contexts has been shown
to bounce cache lines between processors and in general be slow. So that
is not desirable.
The only known user of running the fuse server in a different pid namespace
from the filesystem does not care what the pids are in the fuse messages so
removing this code should not matter.
Getting the translation to a server running outside of the pid namespace of
a container can still be achieved by playing setns games at mount time. It
is also possible to add an option to pass a pid namespace into the fuse
filesystem at mount time.
Fixes: 5d6d3a301c ("fuse: allow server to run in different pid_ns")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently the userspace has no way of knowing whether the fuse
connection ended because of umount or abort via sysfs. It makes it hard
for filesystems to free the mountpoint after abort without worrying
about removing some new mount.
The patch fixes it by returning different errors when userspace reads
from /dev/fuse (-ENODEV for umount and -ECONNABORTED for abort).
Add a new capability flag FUSE_ABORT_ERROR. If set and the connection is
gone because of sysfs abort, reading from the device will return
-ECONNABORTED.
Signed-off-by: Szymon Lukasz <noh4hss@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers of release_pages claim the pages being released are cache
hot. As no one cares about the hotness of pages being released to the
allocator, just ditch the parameter.
No performance impact is expected as the overhead is marginal. The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.
Link: http://lkml.kernel.org/r/20171018075952.10627-7-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 0b6e9ea041 ("fuse: Add support for pid namespaces") broke
Sandstorm.io development tools, which have been sending FUSE file
descriptors across PID namespace boundaries since early 2014.
The above patch added a check that prevented I/O on the fuse device file
descriptor if the pid namespace of the reader/writer was different from the
pid namespace of the mounter. With this change passing the device file
descriptor to a different pid namespace simply doesn't work. The check was
added because pids are transferred to/from the fuse userspace server in the
namespace registered at mount time.
To fix this regression, remove the checks and do the following:
1) the pid in the request header (the pid of the task that initiated the
filesystem operation) is translated to the reader's pid namespace. If a
mapping doesn't exist for this pid, then a zero pid is used. Note: even if
a mapping would exist between the initiator task's pid namespace and the
reader's pid namespace the pid will be zero if either mapping from
initator's to mounter's namespace or mapping from mounter's to reader's
namespace doesn't exist.
2) The lk.pid value in setlk/setlkw requests and getlk reply is left alone.
Userspace should not interpret this value anyway. Also allow the
setlk/setlkw operations if the pid of the task cannot be represented in the
mounter's namespace (pid being zero in that case).
Reported-by: Kenton Varda <kenton@sandstorm.io>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 0b6e9ea041 ("fuse: Add support for pid namespaces")
Cc: <stable@vger.kernel.org> # v4.12+
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Pull fuse updates from Miklos Szeredi:
"Support for pid namespaces from Seth and refcount_t work from Elena"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Add support for pid namespaces
fuse: convert fuse_conn.count from atomic_t to refcount_t
fuse: convert fuse_req.count from atomic_t to refcount_t
fuse: convert fuse_file.count from atomic_t to refcount_t
It is not needed anymore since bdi is initialized whenever superblock
exists.
CC: Miklos Szeredi <miklos@szeredi.hu>
CC: linux-fsdevel@vger.kernel.org
Suggested-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
