The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
it to the CONFIG_MIPS symbol so it's always selected for MIPS.
This fixes the missing pci_iomap declaration for MIPS.
Moreover, the pci_iounmap function was not defined in the
io.h header file if the CONFIG_PCI symbol is not set,
but it should since MIPS is not using CONFIG_GENERIC_IOMAP.
This fixes the following problem on a allyesconfig:
drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
function 'pci_iounmap' [-Werror=implicit-function-declaration]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5478/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add GCMP detection for IASim Marvell chip emulation support.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5529/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This reverts commit 3f4579252aa166641861a64f1c2883365ca126c2. It is
invalid because the macros CAC_ADDR and UNCAC_ADDR have a kernel
virtual address as an argument and also returns a kernel virtual
address. Using and physical address PHYS_OFFSET is blatantly wrong
for a macro common to multiple platforms.
Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5528/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The ISA exception bit selects whether exceptions are taken in classic
or microMIPS mode. This bit is Config3.ISAOnExc and was improperly
defined as bits 16 and 17 instead of just bit 16. A new function was
added so that platforms could set this bit when running a kernel
compiled with only microMIPS instructions.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5377/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
In mm_isBranchInstr() we can short circuit the entire function if
!cpu_has_mmips.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5326/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
It is only used from within a single file, it should not be globally
visible.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5325/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
BMIPS43xx CPUs have two hardware threads, and on some SoCs such as 3368,
the bootloader has configured the system to boot from TP1 instead of the
more usual TP0. Create the physical to logical CPU mapping to cope with
that, do not remap the software interrupts to be cross CPUs such that we
do not have to do use the logical CPU mapping further down the code, and
finally, reset the slave TP1 only if booted from TP0.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: blogic@openwrt.org
Cc: cernekee@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/5553/
Patchwork: https://patchwork.linux-mips.org/patch/5556/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
As Jonas Gorske said in his patch:
Disable cpu_has_mmips for everything but SEAD3 and MALTA. Most of
these platforms are from before the micromips introduction, so they
are very unlikely to implement it.
Reduces an -Os compiled, uncompressed kernel image by 8KiB for
BCM63XX.
This patch taks a different approach than his, we gate the runtime
test for microMIPS by the config symbol SYS_SUPPORTS_MICROMIPS.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5327/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
There is an infinite loop in gic_set_affinity. When irq_set_affinity
gets called on gic controller, it blocks forever.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5537/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The ABI allows these to be clobbered on syscalls, so only save and
restore the multiplier state when the temporary registers need to be
preserved.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5540/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Enable interfaces on EdgeRouter Lite. Tested with cavium_octeon_defconfig
and busybox shell. DHCP & ping works with eth0, eth1 and eth2.
The board type "UBNT_E100" is taken from the sources of the vendor kernel
shipped with the product.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5546/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Prepare of a next patch which will call tlbmiss_handler_setup_pgd on
microMIPS. MicroMIPS complains if the called code s not in the .text
section. To fix this we generate code into space reserved in
arch/mips/mm/tlb-funcs.S
While there, move the rest of the generated functions (handle_tlbl,
handle_tlbs, handle_tlbm) to the same file.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5542/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS I is the ancestor of all MIPS ISA and architecture variants. Anything
ever build in the MIPS empire is either MIPS I or at least contains MIPS I.
If it's running Linux, that is.
So there is little point in having cpu_has_mips_1 because it will always
evaluate as true - though usually only at runtime. Thus there is no
point in having the MIPS_CPU_ISA_I ISA flag, so get rid of it.
Little complication: traps.c was using a test for a pure MIPS I ISA as
a test for an R3000-style cp0. To deal with that, use a check for
cpu_has_3kex or cpu_has_4kex instead.
cpu_has_3kex is a new macro. At the moment its default implementation is
!cpu_has_4kex but this may eventually change if Linux is ever going to
support the oddball MIPS processors R6000 and R8000 so users of either
of these macros should not make any assumptions.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5551/
Following patch to use generic 8250 drivers will need proper clock
information. So when using the internal device tree, populate the
"clock-frequency" property with the correct value.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Jamie Iles <jamie@jamieiles.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: linux-serial@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5515/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Some boards may need to reset their external PHY or switch they are
attached to, add a hook for doing this along with providing custom
linux/gpio.h flags for doing this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5501/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The BCM3368 SoC uses a NVRAM format which is not compatible with the one
used by CFE, provide a default MAC address which is suitable for use and
which is the default one also being used by the bootloader on these
chips.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5498/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add the firmware header format which is used by Broadcom Cable Modem
SoCs such as the BCM3368 SoC. We export the bcm_hcs firmware format
structure because it is used by user-land tools to create firmware
images for these SoCs and will later be used by a corresponding MTD
parser.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5496/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The Broadcom BCM3368 Cable Modem SoC is extremely similar to the
existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort
in the existing code base is required to get it supported. This patch adds
support for the following on-chip peripherals:
- two UARTS
- GPIO
- Ethernet
- SPI
- PCI
- NOR Flash
The most noticeable difference with 3368 is that it has its peripheral
register at 0xfff8_0000 we check that separately in ioremap.h. Since
3368 is identical to 6358 for its clock and reset bits, we use them
verbatim.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Enabling BOOT_RAW is mandatory to get a binary image (objcopy from ELF
to binary) to work. This does not affect the ELF kernels which are used
by CFE on BCM63XX DSL platforms, but is going to be necessary to support
BCM63XX on Cable Modem chips such as BCM3368.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5500/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This board has been EOL for many years now; lets not burden people doing
build coverage and other tree wide work with working on essentially dead
files.
[ralf@linux-mips.org: Also remove arch/mips/include/asm/mach-wrppmc/war.h.]
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Patchwork: http://patchwork.linux-mips.org/patch/5503/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 610019badd ("[MIPS] Remove unused
function alloc_pci_controller.") removed the function, but left the
prototype in the header file.
Remove it as well so people don't get tempted to use it and wonder why
it doesn't work.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5473/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
All BCM63XX SoCs starting with BCM6358 have a BMIPS4350 instead of a
BMIPS3300, so select it unless support for any of the older SoCs is
selected.
All BMIPS4350 have only two CPUs, so select the appropriate default.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/5355/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS software IRQs 0 and 1 are used for interprocessor signaling (IPI)
on BMIPS SMP. Make the board support code aware of them.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
[jogo@openwrt.org: move sw irqs behind timer irq]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Patchwork: https://patchwork.linux-mips.org/patch/5354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
For non-SMP, uses the new random canary value that is stored in the
task struct whenever a new task is forked. Based on ARM version in
df0698be14 and subject to the same
limitations: the variable GCC expects, __stack_chk_guard, is global,
so this will not work on SMP.
Quoting Nicolas Pitre <nico@fluxnic.net>: "One way to overcome this
GCC limitation would be to locate the __stack_chk_guard variable into
a memory page of its own for each CPU, and then use TLB locking to
have each CPU see its own page at the same virtual address for each of
them."
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5488/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Implements basic stack protector support based on ARM version in
c743f38013 , with Kconfig option,
constant canary value set at boot time, and script to check if
compiler actually supports stack protector.
Tested by creating a kernel module that writes past end of char[].
Signed-off-by: Gregory Fong <gregory.0xf0@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Cc: Carmelo Amoroso <carmelo.amoroso@st.com>
Patchwork: https://patchwork.linux-mips.org/patch/5448/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When building with -fstack-protector, gcc emits the __stack_chk_guard and
__stack_chk_fail symbols to check for stack stability. These symbols are
defined in vmlinux but the generated vmlinux.bin that is used to create
the compressed vmlinuz image has no symbol table so the linker can't find
these symbols during the final linking phase. As a result of which, we
need either to redefine these symbols just for the compressed image or drop
the -fstack-protector option when building the compressed image. This patch
implements the latter of two options.
Fixes the following linking problem:
dbg.c:(.text+0x7c): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0x80): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xd4): undefined reference to `__stack_chk_guard'
dbg.c:(.text+0xec): undefined reference to `__stack_chk_fail'
[ralf@linux-mips.org: I'm applying this before the patch that actually adds
stack protector support for MIPS. This means, it will not be possible
to trigger above error message with any commit from the tree but rather
they are what one would hit without this commit.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5575/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)
iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
=Ob6Z
-----END PGP SIGNATURE-----
Merge tag 'v3.10' into sched/core
Merge in a recent upstream commit:
c2853c8df5 include/linux/math64.h: add div64_ul()
because:
72a4cf20cb sched: Change cfs_rq load avg to unsigned long
relies on it.
[ We don't rebase sched/core for this, because the handful of
followup commits after the broken commit are not behavioral
changes so are unlikely to be needed during bisection. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When having enabled MIPS_PGD_C0_CONTEXT, trap_init() might call the
generated tlbmiss_handler_setup_pgd before it was committed to memory,
causing boot failures:
trap_init()
|- per_cpu_trap_init()
| |- TLBMISS_HANDLER_SETUP()
| |- tlbmiss_handler_setup_pgd()
|- flush_tlb_handlers()
To avoid this, move flush_tlb_handlers() into build_tlb_refill_handler()
right after they were generated. We can do this as the cache handling is
initialized just before creating the tlb handlers.
This issue was introduced in 3d8bfdd030
("MIPS: Use C0_KScratch (if present) to hold PGD pointer.").
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Jayachandran C <jchandra@broadcom.com>
Cc: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5539/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sni/pcit.o
arch/mips/sni/pcit.c:150:30: warning: ‘sni_pcit_controller’ defined but not used [-Wunused-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fixes the following build problem:
arch/mips/sni/pcimt.c:188:30: error: 'sni_controller'
defined but not used [-Werror=unused-variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5547/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fixes the following build problem:
mips-linux-gnu-ld:arch/mips/kernel/vmlinux.lds:253: syntax error
because VMLINUX_LOAD_ADDRESS was an empty string for that platform
so the vmlinux.lds.S created an invalid section entry on line 50.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5548/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Use irq_get_trigger_type() to get the IRQ trigger type flags
instead calling irqd_get_trigger_type(irq_desc_get_irq_data(irq))
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1371228049-27080-7-git-send-email-javier.martinez@collabora.co.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
As pointed out by Maciej, POOL16C minor opcodes were mostly shifted
by one bit. Correct those opcodes, and also add jraddiusp to the enum.
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: david.daney@cavium.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5527/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS R2 documents state that an execution hazard barrier is needed
after a TLBR before reading EntryLo.
Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5526/
CC arch/mips/kernel/rtlx.o
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘file_write’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:439:23: error: unused variable ‘rt’ [-Werror=unused-variable]
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c: In function ‘rtlx_module_init’:
/home/ralf/src/linux/upstream-sfr/arch/mips/kernel/rtlx.c:523:3: error: implicit declaration of function ‘set_vi_handler’ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
Caused by 496ad9aa8e [new helper:
file_inode(file)].
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the bogus selects on USB-related symbols for 6345 and 6338, not
only we do not yet support USB on BCM63XX, but they also cause the
following warnings:
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_MMIO which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
warning: (BCM63XX_CPU_6338 && BCM63XX_CPU_6345) selects
USB_OHCI_BIG_ENDIAN_DESC which has unmet direct dependencies
(USB_SUPPORT && USB && USB_OHCI_HCD)
make[4]: Leaving directory `/home/florian/dev/linux'
Just get rid of these bogus Kconfig selects because neither 6345 nor
6338 actually have built-in USB host controllers.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: http://patchwork.linux-mips.org/patch/5497/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Writing a value to a WatchLo* register creates an execution hazard, so
if its value is then read before that hazard is cleared then said value
may be invalid. The mips_probe_watch_registers function must therefore
clear the execution hazard between setting the match bits in a WatchLo*
register & reading the register back in order to check which are set.
This fixes intermittent incorrect watchpoint register probing on some
MIPS cores such as interAptiv & proAptiv.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/5474/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
PowerTV does not provide a prom_putchar function needed for early
printk so remove this symbol for this platform.
Fixes the following problem when EARLY_PRINTK is enabled for powertv:
arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar'
arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
SIBYTE_BUS_WATCHER is only visible if CONFIG_SIBYTE_BCM112X
or CONFIG_SIBYTE_SB1250 is selected according to the
arch/mips/sibyte/Makefile.
This fixes the following build problem:
arch/mips/mm/cerr-sb1.c:254: undefined reference to `check_bus_watcher'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5482/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
CC arch/mips/sibyte/bcm1480/bus_watcher.o
CHK kernel/config_data.h
arch/mips/sibyte/bcm1480/bus_watcher.c: In function ‘check_bus_watcher’:
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: error: ‘A_SCD_BUS_ERR_STATUS_DEBUG’ undeclared (first use in this function)
arch/mips/sibyte/bcm1480/bus_watcher.c:86:82: note: each undeclared identifier is reported only once for each function it appears in
make[3]: *** [arch/mips/sibyte/bcm1480/bus_watcher.o] Error 1
make[2]: *** [arch/mips/sibyte/bcm1480] Error 2
make[1]: *** [arch/mips/sibyte] Error 2
make: *** [arch/mips] Error 2
The register moved around though it's otherwise the same but because of
the changed address it now also has a different name.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/5514/
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
CC arch/mips/mm/cerr-sb1.o
arch/mips/mm/cerr-sb1.c: In function ‘sb1_cache_error’:
arch/mips/mm/cerr-sb1.c:186:98: error: ‘M_BCM1480_SCD_TRACE_CFG_FREEZE’ undeclared (first use in this function)
arch/mips/mm/cerr-sb1.c:186:98: note: each undeclared identifier is reported only once for each function it appears in
make[1]: *** [arch/mips/mm/cerr-sb1.o] Error 1
This happens because 8deab1144b [[MIPS]
Updated Sibyte headers] changed the headers but not all the users.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Reported-by: Markos Chandras <markos.chandras@imgtec.com>
Patchwork: https://patchwork.linux-mips.org/patch/5511/
The write() prototype expects a const char * as argument so declare
it as such.
Fixes the following build problem:
arch/mips/sibyte/common/cfe_console.c:23:5: error: passing argument 2 of
'cfe_write' discards 'const' qualifier from pointer target type [-Werror]
arch/mips/sibyte/common/cfe_console.c:34:4: error: passing argument 2 of
'cfe_write' makes pointer from integer without a cast [-Werror]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5485/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
It's needed for the TASK_INTERRUPTIBLE definition.
Fixes the following build problem:
arch/mips/sibyte/common/sb_tbprof.c:235:4: error: 'TASK_INTERRUPTIBLE'
undeclared (first use in this function)
[ralf@linux-mips.org: Ideally sched.h should be included into the actual
user of TASK_INTERRUPTIBLE, <linux/wait.h> but that seems way too risky
that close to a release.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: sibyte-users@bitmover.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5479/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
ap136_pci_init expects a u8 pointer as an argument.
Fixes the following build problem on a randconfig:
arch/mips/ath79/mach-ap136.c:151:2: error:
too many arguments to function 'ap136_pci_init'
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5476/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
OCTEON II cannot execute code in the default CAC_BASE space, so we
supply a value (0x8000000000000000) that does work.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5457/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove the software reset register and reset value definitions
from the 'include/asm/mips-boards/generic.h' header file. Also
clean up header and whitespace in platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5456/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Remove usage of 'include/asm/mips-boards/generic.h' header file.
Instead, move the defines for SOFTRES_REG and GORESET local to
the platform file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5455/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The soft reset register address and reset value to be written are
incorrect for the SEAD-3 platform. This patch fixes them such that
the SEAD-3 can actually perform a soft reset instead of causing an
exception. Also remove usage of 'include/asm/mips-boards/generic.h'
header file.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5454/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit abe77f90dc (MIPS: Octeon: Add kexec and kdump support) added a
bootmem region for the kernel image itself. The problem is that this
is rounded up to a 0x100000 boundary, which is memory that may not be
owned by the kernel. Depending on the kernel's configuration based
size, this 'extra' memory may contain data passed from the bootloader
to the kernel itself, which if clobbered makes the kernel crash in
various ways.
The fix: Quit rounding the size up, so that we only use memory
assigned to the kernel.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5449/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Then <asm-generic/topology.h> will define cpp macro as default definition
for pcibus_to_node resulting in:
CC arch/mips/pci/pci-ip27.o
arch/mips/pci/pci-ip27.c:220:7: error: expected identifier or ‘(’ before ‘void’
arch/mips/pci/pci-ip27.c:220:12: error: expected ‘)’ before ‘(’ token
make[1]: *** [arch/mips/pci/pci-ip27.o] Error 1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
LD init/built-in.o
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x67c): undefined reference to `bridge_probe'
arch/mips/built-in.o: In function `xtalk_probe_node':
(.cpuinit.text+0x7d8): undefined reference to `bridge_probe'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
LD init/built-in.o
arch/mips/built-in.o: In function `startup_bridge_irq':
ip27-irq.c:(.text+0x434): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x43c): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x460): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x464): undefined reference to `irq_to_bridge'
arch/mips/built-in.o: In function `shutdown_bridge_irq':
ip27-irq.c:(.text+0x564): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x56c): undefined reference to `irq_to_bridge'
ip27-irq.c:(.text+0x5a0): undefined reference to `irq_to_slot'
ip27-irq.c:(.text+0x5a4): undefined reference to `irq_to_slot'
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Conflicts:
drivers/net/wireless/ath/ath9k/Kconfig
drivers/net/xen-netback/netback.c
net/batman-adv/bat_iv_ogm.c
net/wireless/nl80211.c
The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.
The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().
Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.
The nl80211 conflict is a little more involved. In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported. Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.
However, the dump handlers to not use this logic. Instead they have
to explicitly do the locking. There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so. So I fixed that whilst handling the overlapping changes.
To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time
back and the comments/Documentation never got updated.
I figured it out when I was going through sched-domains.txt and so thought of
fixing it globally.
I haven't crossed check if the stuff that is referenced in sched/core.c by all
these files is still present and hasn't changed as that wasn't the motive behind
this patch.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/cdff76a265326ab8d71922a1db5be599f20aad45.1370329560.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
CC init/do_mounts.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/linux/skbuff.h:33,
from include/linux/icmpv6.h:4,
from include/linux/ipv6.h:59,
from include/net/ipv6.h:16,
from include/linux/sunrpc/clnt.h:26,
from include/linux/nfs_fs.h:30,
from init/do_mounts.c:30:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
LD init/mounts.o
CC init/init_task.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/linux/skbuff.h:33,
from include/linux/netfilter.h:5,
from include/net/netns/netfilter.h:5,
from include/net/net_namespace.h:20,
from include/linux/init_task.h:14,
from init/init_task.c:1:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: warning: no return statement in function returning non-void [-Wreturn-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: warning: no return statement in function returning non-void [-Wreturn-type]
LD init/built-in.o
CC arch/mips/cavium-octeon/setup.o
In file included from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/dma-mapping.h:10:0,
from include/linux/dma-mapping.h:76,
from include/asm-generic/pci-dma-compat.h:7,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/pci.h:129,
from include/linux/pci.h:1451,
from /home/ralf/src/linux/linux-mips/arch/mips/include/asm/octeon/pci-octeon.h:12,
from arch/mips/cavium-octeon/setup.c:41:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:24:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_map_dma_mem_page’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:30:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_addr_to_phys’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:36:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_supported’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:47:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h: In function ‘plat_dma_mapping_error’:
/home/ralf/src/linux/linux-mips/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h:63:1: error: no return statement in function returning non-void [-Werror=return-type]
cc1: all warnings being treated as errors
make[2]: *** [arch/mips/cavium-octeon/setup.o] Error 1
make[1]: *** [arch/mips/cavium-octeon] Error 2
make: *** [arch/mips] Error 2
[ralf@linux-mips.org: while at it, also include <linux/bug.h> directly.]
Signed-off-by: David Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/5519/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB, CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION,
CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT and
CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT are all undefined:
arch/mips/cavium-octeon/setup.c: In function ‘prom_init’:
arch/mips/cavium-octeon/setup.c:715:12: error: unused variable ‘ebase’ [-Werror=unused-variable]
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
adds a socket option for low latency polling.
This allows overriding the global sysctl value with a per-socket one.
Unexport sysctl_net_ll_poll since for now it's not needed in modules.
Signed-off-by: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PMC MSP71XX gpio drivers were added in v2.6.28, see commit
9fa32c6b02 ("MIPS: PMC MSP71XX gpio drivers"). They are only built if
CONFIG_HAVE_GPIO_LIB is set.
But the Kconfig symbol HAVE_GPIO_LIB was already removed in v2.6.27, see
commit 7444a72eff ("gpiolib: allow user-selection"). So these drivers
were never buildable. Perhaps no-one noticed because there are no in
tree users of msp71xx_init_gpio() and msp71xx_init_gpio_extended().
Anyhow, these drivers can safely be removed.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5345/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
promcon.o is built if CONFIG_PROM_CONSOLE is set. But there's no Kconfig
symbol PROM_CONSOLE, so promcon.c is unbuildable. Remove it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5344/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch adds support for the Broadcom BCM6345 SoC Ethernet. BCM6345
has a slightly different and older DMA engine which requires the
following modifications:
- the width of the DMA channels on BCM6345 is 64 bytes vs 16 bytes,
which means that the helpers enet_dma{c,s} need to account for this
channel width and we can no longer use macros
- BCM6345 DMA engine does not have any internal SRAM for transfering
buffers
- BCM6345 buffer allocation and flow control is not per-channel but
global (done in RSET_ENETDMA)
- the DMA engine bits are right-shifted by 3 compared to other DMA
generations
- the DMA enable/interrupt masks are a little different (we need to
enabled more bits for 6345)
- some register have the same meaning but are offsetted in the ENET_DMAC
space so a lookup table is required to return the proper offset
The MAC itself is identical and requires no modifications to work.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The invalid value for scratch register is -1, so update the checks of
the form (scratch_reg > 0) to be (scratch_reg >= 0). This will fix
the case in Netlogic XLP where the scratch_reg can be 0.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5444/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
XLR/XLP COP0 scratch is register 22, sel 0-7. Add a function
c0_kscratch() which returns the scratch register for the platform,
and use the return value while generating TLB handlers.
Setup kscratch_mask to 0xf for XLR/XLP since the config4 register
does not exist. This allows the kernel to allocate scratch registers
0-3 if needed.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5445/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix an issue in plat_irq_dispatch due to which it can call do_IRQ
with a PIC irq that is not mapped.
When a per-cpu interrupt and a PIC interrupt are both active, the
check 'eirr & PERCPU_IRQ_MASK' will be true, but the interrupt in 'i'
will be the number of the PIC interrupt. In this case, we will call
do_IRQ on the PIC interrupt without mapping it with nlm_irq_to_xirq().
Fix this by using __ffs64 instead of __ilog2_u64 and using the
interrupt number instead of mask to identify per-cpu interrupts.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5432/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The XLPs in production do not need these workarounds. Remove the code and
the associated ifdef.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5430/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix a cache error found in stress test, caused by the prefetch instruction
going beyond valid memory when acessing the last page of a region. Add
the pref_backup logic similar to XLR in XLP too.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5431/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Earlier we just waited for the first thread of the CPU to come online
before proceeding to wake up others. Update it to wait for all the CPUs
in the core. This will be useful when the boot-up is slow, like while
debugging or when running in a simulator.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5429/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Fix an issue in the reset code. Since this code is copied to the
reset vector, using 'j' for looping is not correct. Use relative
branch 'b'.
Update the usage of 'j' in smpboot.S to be consistent although it
is not a bug there.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5427/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move the nlm_cpu_ready[] array used by the cpu wakeup code to the
boot area, along with rest of the boot parameter code.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5425/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This moves the calculation and casting needed to access the CPU initialization
data to a function nlm_get_boot_data()
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5426/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The core initialization and reset vector setup needs to be done
even when booting uniprocessor. Move this code from smp.c to setup.c
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5428/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The reset and core initialization code should be available for
uniprocessor as well. This changes is just to take out the code
into a different file, without any change to the logic.
The change for uniprocessor initialization code is in a later patch.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5423/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Create new flle arch/mips/netlogic/xlp/dt.c and move the device
tree related code there.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5422/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add SYS_SUPPORTS_ZBOOT and SYS_SUPPORTS_ZBOOT_UART16550 config options
for XLR and XLP.
Update boot/compressed/uart-16550.c to add UART port for XLR and XLP.
Signed-off-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5417/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
